Bypass installer system check for Oracle Designer 10gR2
Is there a way to bypass the batch file or edit it that runs prior to the universal installer loading?
I am trying to install Oracle Designer 10gR2 and the setup starts a batch file (see link below for image) that does a system requirement check. This fails on a machine that I need to install Designer. The reason it fails is because the paging file is in a different place than where this batch file is looking. The system meets the requirement it just happens to have the paging file in the wrong place.
My question; is there a way to turn this off with a command line switch or something so the installation will proceed unimpeded?
Here's the link to the image file, please keep in mind that this is an example and not the actual failure message. Please believe me it is the swap file it is failing on.
Link: http://home.cccexpress.com/greg/images/oraclebatch.JPG
Similar Messages
-
Checking for Oracle Home incompatibilities ...
While installing oracle client 10.2.0.4. I came across this error. See below
Checking the Components installed in Oracle Home
Check complete. The overall result of this check is: Passed
=======================================================================
Checking for Oracle Home incompatibilities ...
Actual Result: NEW_HOME
Check complete. The overall result of this check is: Failed <<<<
Problem: This software can only be installed into an existing Oracle Database 10g Oracle Home.
Recommendation: Choose an existing Oracle Database 10g Oracle Home for installing this software.
Solution:
make sure you set ORACLE_HOME and more IMPORTANTLY make sure you are not imstalling client patch.
You should install 10.2.0.1 /10.2.0.2 full client first before installing the patch. If you don't, hence the above error.
Edited by: solara on 05-Feb-2009 09:13
email : [email protected]Hi,
I think the error message is quiet clear: You are installing a patch and the installer throws the error that cannot found an ORACLE_HOME to where the patch should be installed, and tells you to install a full client (10.2.0.1 or 10.2.0.2), set the variable ORACLE_HOME to the home of the recently installed client, and then apply the patch...
Regards -
Rep. does not have support for Oracle Designer
We're new to SCM and just useing SCM with JDeveloper.
Sorry for newbie stupidness. Searches of this forum didn't
turn up any hits on 21247 or other strings.
Given: brand new install of SCM. Created a private workarea
with RON. Attempting to use RAU to enable branching and
versioning.
I'm having some chicken-vs-the-egg problems. I can't
enable branching in my shared workarea with RAU because it
seems to want to pop up the Migration Dialogue and then
this error occurs:
CDR-21247: Error Cannot proceed!
The target repository does not have support for Oracle Designer
objects
Any help or tip would be greatly appreciated.Curt,
If you managed to create a private workarea from the RON then versioning is enabled. You would have enabled this from the RAU.
Oracle 9i JDeveloper release candidate provides a wizard to create the workarea and private branch.
There are now two flavours of the repository, one with Designer + file and folder support and one with just files and folder support.
If you have no structured Designer components you do not require the Designer support to use JDeveloper with Oracle SCM.
I suggest you try the JDeveloper wizards. The RAU also offers a menu to examine repository object state. Check that you have no invalid
objects, they can be recompiled using the RAU.
David -
Link for JAVA homogenous system copy for oracle
hi
I am unable to find the document for JAVA homogenous system copy for Oracle for NW04 & NW04s
kindly find me the link
thx
regards
ShoebHi
Here you go...-
[JAVA Sytem Copy for ORACLE |https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cd76e07d-0c01-0010-298d-f699863f2ce4]
Regards
Jhony -
Installing support for Oracle Designer Objects in an existing repository
We have been using SCM to store Forms and other files
for our development work.
Now I want to use Repository Reports in the Repository
Object Navigator, this requires me to install support
for Oracle Designer Objects.
Can I use the Repository Administration Utility and
Install support for Oracle Designer Objects
without effecting the existing repository data?
(I've tried metalink but keep getting TCP Error
while logging the TAR).
Cheers
SamHow can i install oracle designer and prepare the repository at first on my personal my pc
-
Run queries against system tables for oracle BPEL processes
I want to run queries against system tables for oracle BPEL processes. It is becoming very difficult for me to us EM as it is very slow,
and not all the time, it is sufficient for our needs.
We are doing load testing and we want find out info like how many requests came in and how many faulted and what time is taken by each request...
So do any of you have the query that I can use and tables that I need to go against?Use the BPEL hydration database table "cube_instance".
There should be plenty of example in the forum regarding this table. -
Installation Deployment Package for Oracle ?
Dear all OTN Members,
I wonder if there is/are any Installation Deployment Package for Oracle just like Deployment Package I ever saw in Visual Basic ?Dear Andrew,
Thx for your suggestion, but actually I had try Project Builder for building the deployment package and I only can install from from Oracle Installer, also I can't create custom shortcut nor icons on desktop (not mention the registry settings yet). For information, me and my customer are using Win2k, so I try to find an executable deployment package. Any further suggestion ?
Thanks in advance.
Regards,
Franko -
Failed preliminary checks for Oracle Real Application Cluster 12C.
Hi, all. Please, help to investigate and solve. Thanks.
[grid@orac1 grid]$ ./runcluvfy.sh stage -pre crsinst -n orac1,orac2 -fixup -verbose
Performing pre-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "orac1"
Destination Node Reachable?
orac1 yes
orac2 yes
Result: Node reachability check passed from node "orac1"
Checking user equivalence...
Check: User equivalence for user "grid"
Node Name Status
orac2 passed
orac1 passed
Result: User equivalence check passed for user "grid"
Checking node connectivity...
Checking hosts config file...
Node Name Status
orac1 passed
orac2 passed
Verification of the hosts config file successful
Interface information for node "orac1"
Name IP Address Subnet Gateway Def. Gateway HW Address MTU
eth0 10.154.137.101 10.154.137.0 0.0.0.0 10.0.4.2 08:00:27:28:D1:1F 1500
eth1 10.154.138.101 10.154.138.0 0.0.0.0 10.0.4.2 08:00:27:51:E8:B9 1500
eth2 10.0.4.15 10.0.4.0 0.0.0.0 10.0.4.2 08:00:27:5B:D7:29 1500
Interface information for node "orac2"
Name IP Address Subnet Gateway Def. Gateway HW Address MTU
eth0 10.154.137.102 10.154.137.0 0.0.0.0 10.0.4.2 08:00:27:7F:C8:70 1500
eth1 10.154.138.102 10.154.138.0 0.0.0.0 10.0.4.2 08:00:27:9D:27:D8 1500
eth2 10.0.4.15 10.0.4.0 0.0.0.0 10.0.4.2 08:00:27:6E:92:43 1500
Check: Node connectivity of subnet "10.154.137.0"
Source Destination Connected?
orac1[10.154.137.101] orac2[10.154.137.102] yes
Result: Node connectivity passed for subnet "10.154.137.0" with node(s) orac1,orac2
Check: TCP connectivity of subnet "10.154.137.0"
Source Destination Connected?
orac1:10.154.137.101 orac2:10.154.137.102 failed
ERROR:
PRVF-7617 : Node connectivity between "orac1 : 10.154.137.101" and "orac2 : 10.154.137.102" failed
Result: TCP connectivity check failed for subnet "10.154.137.0"
Check: Node connectivity of subnet "10.154.138.0"
Source Destination Connected?
orac1[10.154.138.101] orac2[10.154.138.102] yes
Result: Node connectivity passed for subnet "10.154.138.0" with node(s) orac1,orac2
Check: TCP connectivity of subnet "10.154.138.0"
Source Destination Connected?
orac1:10.154.138.101 orac2:10.154.138.102 failed
ERROR:
PRVF-7617 : Node connectivity between "orac1 : 10.154.138.101" and "orac2 : 10.154.138.102" failed
Result: TCP connectivity check failed for subnet "10.154.138.0"
Check: Node connectivity of subnet "10.0.4.0"
Source Destination Connected?
orac1[10.0.4.15] orac2[10.0.4.15] yes
Result: Node connectivity passed for subnet "10.0.4.0" with node(s) orac1,orac2
Check: TCP connectivity of subnet "10.0.4.0"
Source Destination Connected?
orac1:10.0.4.15 orac2:10.0.4.15 failed
ERROR:
PRVF-7617 : Node connectivity between "orac1 : 10.0.4.15" and "orac2 : 10.0.4.15" failed
Result: TCP connectivity check failed for subnet "10.0.4.0"
Interfaces found on subnet "10.0.4.0" that are likely candidates for VIP are:
orac1 eth2:10.0.4.15
orac2 eth2:10.0.4.15
WARNING:
Could not find a suitable set of interfaces for the private interconnect
Checking subnet mask consistency...
Subnet mask consistency check passed for subnet "10.154.137.0".
Subnet mask consistency check passed for subnet "10.154.138.0".
Subnet mask consistency check passed for subnet "10.0.4.0".
Subnet mask consistency check passed.
ERROR:
PRVG-1172 : The IP address "10.0.4.15" is on multiple interfaces "eth2,eth2" on nodes "orac2,orac1"
Result: Node connectivity check failed
Checking multicast communication...
Checking subnet "10.154.137.0" for multicast communication with multicast group "224.0.0.251"...
PRVG-11138 : Interface "10.154.137.101" on node "orac1" is not able to communicate with interface "10.154.137.101" on node "orac1" over multicast group "224.0.0.251"
PRVG-11138 : Interface "10.154.137.101" on node "orac1" is not able to communicate with interface "10.154.137.102" on node "orac2" over multicast group "224.0.0.251"
PRVG-11138 : Interface "10.154.137.102" on node "orac2" is not able to communicate with interface "10.154.137.101" on node "orac1" over multicast group "224.0.0.251"
PRVG-11138 : Interface "10.154.137.102" on node "orac2" is not able to communicate with interface "10.154.137.102" on node "orac2" over multicast group "224.0.0.251"
Checking subnet "10.154.138.0" for multicast communication with multicast group "224.0.0.251"...
PRVG-11138 : Interface "10.154.138.101" on node "orac1" is not able to communicate with interface "10.154.138.101" on node "orac1" over multicast group "224.0.0.251"
PRVG-11138 : Interface "10.154.138.101" on node "orac1" is not able to communicate with interface "10.154.138.102" on node "orac2" over multicast group "224.0.0.251"
PRVG-11138 : Interface "10.154.138.102" on node "orac2" is not able to communicate with interface "10.154.138.101" on node "orac1" over multicast group "224.0.0.251"
PRVG-11138 : Interface "10.154.138.102" on node "orac2" is not able to communicate with interface "10.154.138.102" on node "orac2" over multicast group "224.0.0.251"
Checking subnet "10.0.4.0" for multicast communication with multicast group "224.0.0.251"...
PRVG-11138 : Interface "10.0.4.15" on node "orac1" is not able to communicate with interface "10.0.4.15" on node "orac1" over multicast group "224.0.0.251"
PRVG-11138 : Interface "10.0.4.15" on node "orac1" is not able to communicate with interface "10.0.4.15" on node "orac2" over multicast group "224.0.0.251"
PRVG-11138 : Interface "10.0.4.15" on node "orac2" is not able to communicate with interface "10.0.4.15" on node "orac1" over multicast group "224.0.0.251"
PRVG-11138 : Interface "10.0.4.15" on node "orac2" is not able to communicate with interface "10.0.4.15" on node "orac2" over multicast group "224.0.0.251"
Checking ASMLib configuration.
Node Name Status
orac1 passed
orac2 passed
Result: Check for ASMLib configuration passed.
Check: Total memory
Node Name Available Required Status
orac2 5.714GB (5991520.0KB) 4GB (4194304.0KB) passed
orac1 5.714GB (5991520.0KB) 4GB (4194304.0KB) passed
Result: Total memory check passed
Check: Available memory
Node Name Available Required Status
orac2 5.2293GB (5483324.0KB) 50MB (51200.0KB) passed
orac1 5.1456GB (5395600.0KB) 50MB (51200.0KB) passed
Result: Available memory check passed
Check: Swap space
Node Name Available Required Status
orac2 6.125GB (6422520.0KB) 5.714GB (5991520.0KB) passed
orac1 6.125GB (6422520.0KB) 5.714GB (5991520.0KB) passed
Result: Swap space check passed
Check: Free disk space for "orac2:/usr,orac2:/var,orac2:/etc,orac2:/sbin,orac2:/tmp"
Path Node Name Mount point Available Required Status
/usr orac2 / 37.8398GB 1.0635GB passed
/var orac2 / 37.8398GB 1.0635GB passed
/etc orac2 / 37.8398GB 1.0635GB passed
/sbin orac2 / 37.8398GB 1.0635GB passed
/tmp orac2 / 37.8398GB 1.0635GB passed
Result: Free disk space check passed for "orac2:/usr,orac2:/var,orac2:/etc,orac2:/sbin,orac2:/tmp"
Check: Free disk space for "orac1:/usr,orac1:/var,orac1:/etc,orac1:/sbin,orac1:/tmp"
Path Node Name Mount point Available Required Status
/usr orac1 / 32.4382GB 1.0635GB passed
/var orac1 / 32.4382GB 1.0635GB passed
/etc orac1 / 32.4382GB 1.0635GB passed
/sbin orac1 / 32.4382GB 1.0635GB passed
/tmp orac1 / 32.4382GB 1.0635GB passed
Result: Free disk space check passed for "orac1:/usr,orac1:/var,orac1:/etc,orac1:/sbin,orac1:/tmp"
Check: User existence for "grid"
Node Name Status Comment
orac2 passed exists(1100)
orac1 passed exists(1100)
Checking for multiple users with UID value 1100
Result: Check for multiple users with UID value 1100 passed
Result: User existence check passed for "grid"
Check: Group existence for "oinstall"
Node Name Status Comment
orac2 passed exists
orac1 passed exists
Result: Group existence check passed for "oinstall"
Check: Group existence for "dba"
Node Name Status Comment
orac2 passed exists
orac1 passed exists
Result: Group existence check passed for "dba"
Check: Membership of user "grid" in group "oinstall" [as Primary]
Node Name User Exists Group Exists User in Group Primary Status
orac2 yes yes yes yes passed
orac1 yes yes yes yes passed
Result: Membership check for user "grid" in group "oinstall" [as Primary] passed
Check: Membership of user "grid" in group "dba"
Node Name User Exists Group Exists User in Group Status
orac2 yes yes yes passed
orac1 yes yes yes passed
Result: Membership check for user "grid" in group "dba" passed
Check: Run level
Node Name run level Required Status
orac2 5 3,5 passed
orac1 5 3,5 passed
Result: Run level check passed
Check: Hard limits for "maximum open file descriptors"
Node Name Type Available Required Status
orac2 hard 4096 65536 failed
orac1 hard 4096 65536 failed
Result: Hard limits check failed for "maximum open file descriptors"
Check: Soft limits for "maximum open file descriptors"
Node Name Type Available Required Status
orac2 soft 1024 1024 passed
orac1 soft 4096 1024 passed
Result: Soft limits check passed for "maximum open file descriptors"
Check: Hard limits for "maximum user processes"
Node Name Type Available Required Status
orac2 hard 46654 16384 passed
orac1 hard 46654 16384 passed
Result: Hard limits check passed for "maximum user processes"
Check: Soft limits for "maximum user processes"
Node Name Type Available Required Status
orac2 soft 1024 2047 failed
orac1 soft 1024 2047 failed
Result: Soft limits check failed for "maximum user processes"
Check: System architecture
Node Name Available Required Status
orac2 x86_64 x86_64 passed
orac1 x86_64 x86_64 passed
Result: System architecture check passed
Check: Kernel version
Node Name Available Required Status
orac2 2.6.32-279.el6.x86_64 2.6.32 passed
orac1 2.6.32-279.el6.x86_64 2.6.32 passed
Result: Kernel version check passed
Check: Kernel parameter for "semmsl"
Node Name Current Configured Required Status Comment
orac1 250 250 250 passed
orac2 250 250 250 passed
Result: Kernel parameter check passed for "semmsl"
Check: Kernel parameter for "semmns"
Node Name Current Configured Required Status Comment
orac1 32000 32000 32000 passed
orac2 32000 32000 32000 passed
Result: Kernel parameter check passed for "semmns"
Check: Kernel parameter for "semopm"
Node Name Current Configured Required Status Comment
orac1 100 100 100 passed
orac2 100 100 100 passed
Result: Kernel parameter check passed for "semopm"
Check: Kernel parameter for "semmni"
Node Name Current Configured Required Status Comment
orac1 128 128 128 passed
orac2 128 128 128 passed
Result: Kernel parameter check passed for "semmni"
Check: Kernel parameter for "shmmax"
Node Name Current Configured Required Status Comment
orac1 4398046511104 4398046511104 3067658240 passed
orac2 4398046511104 4398046511104 3067658240 passed
Result: Kernel parameter check passed for "shmmax"
Check: Kernel parameter for "shmmni"
Node Name Current Configured Required Status Comment
orac1 4096 4096 4096 passed
orac2 4096 4096 4096 passed
Result: Kernel parameter check passed for "shmmni"
Check: Kernel parameter for "shmall"
Node Name Current Configured Required Status Comment
orac1 4294967296 4294967296 599152 passed
orac2 4294967296 4294967296 599152 passed
Result: Kernel parameter check passed for "shmall"
Check: Kernel parameter for "file-max"
Node Name Current Configured Required Status Comment
orac1 6815744 6815744 6815744 passed
orac2 6815744 6815744 6815744 passed
Result: Kernel parameter check passed for "file-max"
Check: Kernel parameter for "ip_local_port_range"
Node Name Current Configured Required Status Comment
orac1 between 9000 & 65500 between 9000 & 65500 between 9000 & 65535 passed
orac2 between 9000 & 65500 between 9000 & 65500 between 9000 & 65535 passed
Result: Kernel parameter check passed for "ip_local_port_range"
Check: Kernel parameter for "rmem_default"
Node Name Current Configured Required Status Comment
orac1 262144 262144 262144 passed
orac2 262144 262144 262144 passed
Result: Kernel parameter check passed for "rmem_default"
Check: Kernel parameter for "rmem_max"
Node Name Current Configured Required Status Comment
orac1 4194304 4194304 4194304 passed
orac2 4194304 4194304 4194304 passed
Result: Kernel parameter check passed for "rmem_max"
Check: Kernel parameter for "wmem_default"
Node Name Current Configured Required Status Comment
orac1 262144 262144 262144 passed
orac2 262144 262144 262144 passed
Result: Kernel parameter check passed for "wmem_default"
Check: Kernel parameter for "wmem_max"
Node Name Current Configured Required Status Comment
orac1 1048576 1048576 1048576 passed
orac2 1048576 1048576 1048576 passed
Result: Kernel parameter check passed for "wmem_max"
Check: Kernel parameter for "aio-max-nr"
Node Name Current Configured Required Status Comment
orac1 1048576 1048576 1048576 passed
orac2 1048576 1048576 1048576 passed
Result: Kernel parameter check passed for "aio-max-nr"
Check: Package existence for "binutils"
Node Name Available Required Status
orac2 binutils-2.20.51.0.2-5.34.el6 binutils-2.20.51.0.2 passed
orac1 binutils-2.20.51.0.2-5.34.el6 binutils-2.20.51.0.2 passed
Result: Package existence check passed for "binutils"
Check: Package existence for "compat-libcap1"
Node Name Available Required Status
orac2 compat-libcap1-1.10-1 compat-libcap1-1.10 passed
orac1 compat-libcap1-1.10-1 compat-libcap1-1.10 passed
Result: Package existence check passed for "compat-libcap1"
Check: Package existence for "compat-libstdc++-33(x86_64)"
Node Name Available Required Status
orac2 compat-libstdc++-33(x86_64)-3.2.3-69.el6 compat-libstdc++-33(x86_64)-3.2.3 passed
orac1 compat-libstdc++-33(x86_64)-3.2.3-69.el6 compat-libstdc++-33(x86_64)-3.2.3 passed
Result: Package existence check passed for "compat-libstdc++-33(x86_64)"
Check: Package existence for "libgcc(x86_64)"
Node Name Available Required Status
orac2 libgcc(x86_64)-4.4.7-11.el6 libgcc(x86_64)-4.4.4 passed
orac1 libgcc(x86_64)-4.4.7-11.el6 libgcc(x86_64)-4.4.4 passed
Result: Package existence check passed for "libgcc(x86_64)"
Check: Package existence for "libstdc++(x86_64)"
Node Name Available Required Status
orac2 libstdc++(x86_64)-4.4.7-11.el6 libstdc++(x86_64)-4.4.4 passed
orac1 libstdc++(x86_64)-4.4.7-11.el6 libstdc++(x86_64)-4.4.4 passed
Result: Package existence check passed for "libstdc++(x86_64)"
Check: Package existence for "libstdc++-devel(x86_64)"
Node Name Available Required Status
orac2 libstdc++-devel(x86_64)-4.4.7-11.el6 libstdc++-devel(x86_64)-4.4.4 passed
orac1 libstdc++-devel(x86_64)-4.4.7-11.el6 libstdc++-devel(x86_64)-4.4.4 passed
Result: Package existence check passed for "libstdc++-devel(x86_64)"
Check: Package existence for "sysstat"
Node Name Available Required Status
orac2 sysstat-9.0.4-20.el6 sysstat-9.0.4 passed
orac1 sysstat-9.0.4-20.el6 sysstat-9.0.4 passed
Result: Package existence check passed for "sysstat"
Check: Package existence for "gcc"
Node Name Available Required Status
orac2 gcc-4.4.7-11.el6 gcc-4.4.4 passed
orac1 gcc-4.4.7-11.el6 gcc-4.4.4 passed
Result: Package existence check passed for "gcc"
Check: Package existence for "gcc-c++"
Node Name Available Required Status
orac2 gcc-c++-4.4.7-11.el6 gcc-c++-4.4.4 passed
orac1 gcc-c++-4.4.7-11.el6 gcc-c++-4.4.4 passed
Result: Package existence check passed for "gcc-c++"
Check: Package existence for "ksh"
Node Name Available Required Status
orac2 ksh-20120801-21.el6.1 ksh-... passed
orac1 ksh-20120801-21.el6.1 ksh-... passed
Result: Package existence check passed for "ksh"
Check: Package existence for "make"
Node Name Available Required Status
orac2 make-3.81-20.el6 make-3.81 passed
orac1 make-3.81-20.el6 make-3.81 passed
Result: Package existence check passed for "make"
Check: Package existence for "glibc(x86_64)"
Node Name Available Required Status
orac2 glibc(x86_64)-2.12-1.149.el6 glibc(x86_64)-2.12 passed
orac1 glibc(x86_64)-2.12-1.149.el6 glibc(x86_64)-2.12 passed
Result: Package existence check passed for "glibc(x86_64)"
Check: Package existence for "glibc-devel(x86_64)"
Node Name Available Required Status
orac2 glibc-devel(x86_64)-2.12-1.149.el6 glibc-devel(x86_64)-2.12 passed
orac1 glibc-devel(x86_64)-2.12-1.149.el6 glibc-devel(x86_64)-2.12 passed
Result: Package existence check passed for "glibc-devel(x86_64)"
Check: Package existence for "libaio(x86_64)"
Node Name Available Required Status
orac2 libaio(x86_64)-0.3.107-10.el6 libaio(x86_64)-0.3.107 passed
orac1 libaio(x86_64)-0.3.107-10.el6 libaio(x86_64)-0.3.107 passed
Result: Package existence check passed for "libaio(x86_64)"
Check: Package existence for "libaio-devel(x86_64)"
Node Name Available Required Status
orac2 libaio-devel(x86_64)-0.3.107-10.el6 libaio-devel(x86_64)-0.3.107 passed
orac1 libaio-devel(x86_64)-0.3.107-10.el6 libaio-devel(x86_64)-0.3.107 passed
Result: Package existence check passed for "libaio-devel(x86_64)"
Check: Package existence for "nfs-utils"
Node Name Available Required Status
orac2 nfs-utils-1.2.3-26.el6 nfs-utils-1.2.3-15 passed
orac1 nfs-utils-1.2.3-26.el6 nfs-utils-1.2.3-15 passed
Result: Package existence check passed for "nfs-utils"
Checking availability of ports "6200,6100" required for component "Oracle Notification Service (ONS)"
Node Name Port Number Protocol Available Status
orac2 6200 TCP yes successful
orac1 6200 TCP yes successful
orac2 6100 TCP yes successful
orac1 6100 TCP yes successful
Result: Port availability check passed for ports "6200,6100"
Checking for multiple users with UID value 0
Result: Check for multiple users with UID value 0 passed
Check: Current group ID
Result: Current group ID check passed
Starting check for consistency of primary group of root user
Node Name Status
orac2 passed
orac1 passed
Check for consistency of root user's primary group passed
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
The NTP configuration file "/etc/ntp.conf" is available on all nodes
NTP Configuration file check passed
Checking daemon liveness...
Check: Liveness for "ntpd"
Node Name Running?
orac2 yes
orac1 yes
Result: Liveness check passed for "ntpd"
Check for NTP daemon or service alive passed on all nodes
Checking whether NTP daemon or service is using UDP port 123 on all nodes
Check for NTP daemon or service using UDP port 123
Node Name Port Open?
orac2 yes
orac1 yes
NTP common Time Server Check started...
NTP Time Server "193.27.209.1" is common to all nodes on which the NTP daemon is running
NTP Time Server "194.29.130.252" is common to all nodes on which the NTP daemon is running
Check of common NTP Time Server passed
Clock time offset check from NTP Time Server started...
Checking on nodes "[orac2, orac1]"...
Check: Clock time offset from NTP Time Server
Time Server: 193.27.209.1
Time Offset Limit: 1000.0 msecs
Node Name Time Offset Status
orac2 -355.25 passed
orac1 -124.19 passed
Time Server "193.27.209.1" has time offsets that are within permissible limits for nodes "[orac2, orac1]".
Time Server: 194.29.130.252
Time Offset Limit: 1000.0 msecs
Node Name Time Offset Status
orac2 -358.87 passed
orac1 -109.63 passed
Time Server "194.29.130.252" has time offsets that are within permissible limits for nodes "[orac2, orac1]".
Clock time offset check passed
Result: Clock synchronization check using Network Time Protocol(NTP) passed
Checking Core file name pattern consistency...
Core file name pattern consistency check passed.
Checking to make sure user "grid" is not in "root" group
Node Name Status Comment
orac2 passed does not exist
orac1 passed does not exist
Result: User "grid" is not part of "root" group. Check passed
Check default user file creation mask
Node Name Available Required Comment
orac2 0022 0022 passed
orac1 0022 0022 passed
Result: Default user file creation mask check passed
Checking integrity of file "/etc/resolv.conf" across nodes
Checking the file "/etc/resolv.conf" to make sure only one of domain and search entries is defined
WARNING:
PRVF-5640 : Both search and domain entries are present in file "/etc/resolv.conf" on the following nodes: orac1,orac2
Checking if domain entry in file "/etc/resolv.conf" is consistent across the nodes...
Checking file "/etc/resolv.conf" to make sure that only one domain entry is defined
More than one "domain" entry does not exist in any "/etc/resolv.conf" file
All nodes have same "domain" entry defined in file "/etc/resolv.conf"
Checking if search entry in file "/etc/resolv.conf" is consistent across the nodes...
Checking file "/etc/resolv.conf" to make sure that only one search entry is defined
More than one "search" entry does not exist in any "/etc/resolv.conf" file
All nodes have same "search" order defined in file "/etc/resolv.conf"
Checking DNS response time for an unreachable node
Node Name Status
orac1 passed
orac2 passed
The DNS response time for an unreachable node is within acceptable limit on all nodes
Check for integrity of file "/etc/resolv.conf" passed
Check: Time zone consistency
Result: Time zone consistency check passed
Checking integrity of name service switch configuration file "/etc/nsswitch.conf" ...
Checking if "hosts" entry in file "/etc/nsswitch.conf" is consistent across nodes...
Checking file "/etc/nsswitch.conf" to make sure that only one "hosts" entry is defined
More than one "hosts" entry does not exist in any "/etc/nsswitch.conf" file
All nodes have same "hosts" entry defined in file "/etc/nsswitch.conf"
Check for integrity of name service switch configuration file "/etc/nsswitch.conf" passed
Checking daemon "avahi-daemon" is not configured and running
Check: Daemon "avahi-daemon" not configured
Node Name Configured Status
orac2 yes failed
orac1 yes failed
Daemon not configured check failed for process "avahi-daemon"
Check: Daemon "avahi-daemon" not running
Node Name Running? Status
orac2 yes failed
orac1 yes failed
Daemon not running check failed for process "avahi-daemon"Yes, i can.
Node1.
[grid@orac1 grid]$ ping 10.154.137.101
PING 10.154.137.101 (10.154.137.101) 56(84) bytes of data.
64 bytes from 10.154.137.101: icmp_seq=1 ttl=64 time=0.105 ms
64 bytes from 10.154.137.101: icmp_seq=2 ttl=64 time=0.089 ms
64 bytes from 10.154.137.101: icmp_seq=3 ttl=64 time=0.056 ms
64 bytes from 10.154.137.101: icmp_seq=4 ttl=64 time=0.086 ms
^C
--- 10.154.137.101 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3098ms
rtt min/avg/max/mdev = 0.056/0.084/0.105/0.017 ms
[grid@orac1 grid]$ ping 10.154.137.102
PING 10.154.137.102 (10.154.137.102) 56(84) bytes of data.
64 bytes from 10.154.137.102: icmp_seq=1 ttl=64 time=2.15 ms
64 bytes from 10.154.137.102: icmp_seq=2 ttl=64 time=0.497 ms
64 bytes from 10.154.137.102: icmp_seq=3 ttl=64 time=0.364 ms
^C
--- 10.154.137.102 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2495ms
rtt min/avg/max/mdev = 0.364/1.003/2.150/0.813 ms
[grid@orac1 grid]$ ping 10.154.138.101
PING 10.154.138.101 (10.154.138.101) 56(84) bytes of data.
64 bytes from 10.154.138.101: icmp_seq=1 ttl=64 time=0.059 ms
64 bytes from 10.154.138.101: icmp_seq=2 ttl=64 time=0.173 ms
64 bytes from 10.154.138.101: icmp_seq=3 ttl=64 time=0.046 ms
64 bytes from 10.154.138.101: icmp_seq=4 ttl=64 time=0.056 ms
^C
--- 10.154.138.101 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3205ms
rtt min/avg/max/mdev = 0.046/0.083/0.173/0.052 ms
[grid@orac1 grid]$ ping 10.154.138.102
PING 10.154.138.102 (10.154.138.102) 56(84) bytes of data.
64 bytes from 10.154.138.102: icmp_seq=1 ttl=64 time=1.80 ms
64 bytes from 10.154.138.102: icmp_seq=2 ttl=64 time=0.418 ms
64 bytes from 10.154.138.102: icmp_seq=3 ttl=64 time=0.899 ms
^C
--- 10.154.138.102 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2860ms
rtt min/avg/max/mdev = 0.418/1.041/1.808/0.577 ms
[grid@orac1 grid]$
Node2.
[grid@orac2 ~]$ ping 10.154.137.101
PING 10.154.137.101 (10.154.137.101) 56(84) bytes of data.
64 bytes from 10.154.137.101: icmp_seq=1 ttl=64 time=0.537 ms
64 bytes from 10.154.137.101: icmp_seq=2 ttl=64 time=1.79 ms
64 bytes from 10.154.137.101: icmp_seq=3 ttl=64 time=0.733 ms
^C
--- 10.154.137.101 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2774ms
rtt min/avg/max/mdev = 0.537/1.021/1.794/0.552 ms
[grid@orac2 ~]$ ping 10.154.137.102
PING 10.154.137.102 (10.154.137.102) 56(84) bytes of data.
64 bytes from 10.154.137.102: icmp_seq=1 ttl=64 time=0.043 ms
64 bytes from 10.154.137.102: icmp_seq=2 ttl=64 time=0.106 ms
64 bytes from 10.154.137.102: icmp_seq=3 ttl=64 time=0.039 ms
64 bytes from 10.154.137.102: icmp_seq=4 ttl=64 time=0.039 ms
^C
--- 10.154.137.102 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3282ms
rtt min/avg/max/mdev = 0.039/0.056/0.106/0.029 ms
[grid@orac2 ~]$ ping 10.154.138.101
PING 10.154.138.101 (10.154.138.101) 56(84) bytes of data.
64 bytes from 10.154.138.101: icmp_seq=1 ttl=64 time=0.718 ms
64 bytes from 10.154.138.101: icmp_seq=2 ttl=64 time=0.515 ms
64 bytes from 10.154.138.101: icmp_seq=3 ttl=64 time=0.504 ms
^C
--- 10.154.138.101 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2468ms
rtt min/avg/max/mdev = 0.504/0.579/0.718/0.098 ms
[grid@orac2 ~]$ ping 10.154.138.102
PING 10.154.138.102 (10.154.138.102) 56(84) bytes of data.
64 bytes from 10.154.138.102: icmp_seq=1 ttl=64 time=0.058 ms
64 bytes from 10.154.138.102: icmp_seq=2 ttl=64 time=0.087 ms
64 bytes from 10.154.138.102: icmp_seq=3 ttl=64 time=0.052 ms
64 bytes from 10.154.138.102: icmp_seq=4 ttl=64 time=0.090 ms
^C
--- 10.154.138.102 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3755ms
rtt min/avg/max/mdev = 0.052/0.071/0.090/0.019 ms
[grid@orac2 ~]$ -
Solaris system requirements for Oracle 9i
Hi everyone,
I want to get a Sun Sparc to use for Oracle 9i. Someone who can outline for the system requirement?
Thanks in anticipationIgnatius,
system requirements are described in Installation Guide (Pre-Installation Requirements).
For example here: http://download-west.oracle.com/docs/html/A96167_01/pre.htm#sthref106 -
Bypass P_orgin auth check for standard MSS reporting
Hi SAPers,
on my HR system, I have 2 types of users : ESS/MSS users (via portal) and backend users (via sapgui).
ESS/MSS role does not contain any P_ORGIN authorization because it should be added to their authorizations if they are also backend users.
The problem is coming from standard MSS reports : the "time statement overview" among other report needs P_ORGIN (IT 0, 1, 2, 7, 8, ...) !
Is there a way to bypass the standard authorization check for MSS reports ?
Thanks in advance,
Olivier.>
Olivier TACA wrote:
> Example :
>
> Portal Role for ESS user contains P_ORGIN for IT 0006 (Address)
>
> Backend Role for backend user contains P_ORGIN for IT 0002 (Personal data) ... and S_TCODE for PA30 of course.
>
> The backend user, who is also an ESS user, can manage IT 0006, which is not foreseen in the backend role.
>
> I use P_PERNR for the portal role to manage access to infotype.
I see two issues here:
1. ESS is NOT setup correctly.
- You don't need P_ORGIN for ESS. You only need P_PERNR. The trace might even show an error looking for P_ORGIN but you do not need it. This is an example of a role I have using ESS services for addresses. I don't have P_ORGIN, P_ORGINCON or P_ORIGXXCON. Do NOT use PA30, for ESS, that is very dangerous. The ESS services can be added to a role and should be use for ESS.
Here is an example of what I have:
Manually HR: Master Data - Personnel Number Check P_PERNR
Manually Address Change - Permanent and Emergency
Authorization level D, E, M, S, W AUTHC
Infotype 0006 INFTY
Interpretation of assigned per I PSIGN
Subtype * SUBTY
2. MSS - I can't find the service for the report you are looking for. If you provide the MSS service I can run some traces and probably help you isolate your problem. Example of an MSS service (sap.com/mss~pla/PlanningPrimaryCosts).
I hope I didn't sound too harsh; I am just trying to help.
Regards,
-John N.
Edited by: John Navarro on Aug 5, 2008 5:46 PM -
Check for Oracle Service using a batch
Hi,
I am using Oracle XE 10g as the database for my project.
I have a custom service to be started only if Oracle service is up and running. Currently i am checking for the service as below:
+:WHILELOOP+
net start | find /i "oracleservicexe" >nul
IF not "%ERRORLEVEL%"=="0" GOTO :WHILELOOP
SLEEP 60
start javaw -Xmx1024 com.startup.StartServer
But when i use the above script, the java command for StartServer is called as soon as the service is started; but in reality the Oracle service takes around 30-50 secs to go in to RUNNING state and because of that i get an error when starting my server. "*ORA-01033: ORACLE initialization or shutdown in progress.*" Hence i added that SLEEP 60, to avoid the error, but at times it takes a bit longer than 60 secs then i get the error.
Can anybody suggest me a better way apply the required check which will not depend on having a wait period and will actually check if Oracle service is actually RUNNING.
Regards,
RahulHello rahul,
One possible solution to what you are trying to do is to use the Windows command sc like this:
sc query winmgmt
SERVICE_NAME: winmgmt
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(STOPPABLE, PAUSABLE, ACCEPTS_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0in the above example, I queried the status of the service winmgmt. If you piped the output into some file then used Find to check the status as "4 RUNNING" in some loop, once it gets to RUNNING you could proceed with the rest of the commands.
I don't use Windows CMD, therefore I cannot provide you more help than the above but, with a little work on your part, you can make this work.
HTH,
John.
PS: whatever loop you choose to check for the running status, be careful with creating an infinite loop if the service fails to start.
Edited by: 440bx - 11gR2 on Nov 12, 2010 3:20 PM - added the caution about creating an infinite loop in some cases. -
User name & password for oracle designer 2000
Hi,
I have downloaded the oracle designer 2000 from oracle . I need user name & password to enter the screen. If anyone knows pl. help meThe username and password you are looking for is that of the Database you are connecting to. I.e. where you have installed the designer repository.
If you have not installed the repository, follow the instruction to create the oracle user (repository owner), install the designer repository and use it to login.
The best thing will be to download the documentation the way you downloaded the software. It is important -
NOWS SBE System Checking for Updates
From the SBE webpage for 3 days now it has been stuck on "Checking for Updates" I have even rebooted the server and still same message.
On the console I have a orange ! icon in the task bar. When I mouse over it tells me I have 9 updates. If I remember correctly I am only to do updates from the web interface.
Any ideas?
ThanksOriginally Posted by highvoltage
From the SBE webpage for 3 days now it has been stuck on "Checking for Updates" I have even rebooted the server and still same message.
On the console I have a orange ! icon in the task bar. When I mouse over it tells me I have 9 updates. If I remember correctly I am only to do updates from the web interface.
Any ideas?
Thanks
rm /var/lib/simba/sbs/conf/checking.txt
rm /var/lib/simba/sbs/conf/checking_rss.txt -
How to check for Oracle AS installation on Windows XP
How can I check to see if Oracle Application Server is installed on my machine? I am using Windows Service Pack 3.
also in Windows Services, you may find Like 4 or 5, depend on what you installed. they goes like
Oracle<instancename><oraclehome>ascontrol
Oracle<instancename><oraclehome>processmanager
and so on.
Regards -
Minimum System Requirement for Oracle 12c Database Installation
Hi,
Can Anybody please tell me the minimum requirement ti install Oracle 12c Database On Virtual Box.
Regards...
AsitEnterprise Edition 6.4 GB
Standard Edition 6.1 GB
Standard Edition One 6.1 GB
This are the pure hdd requirements.
Then it's 1 GB of space in the /tmp directory.
Minimum: 1 GB of RAM
Recommended: 2 GB of RAM or more.
Swap Space Requirement for Linux:
Between 1 GB and 2 GB.
1.5 times the size of the RAM
Between 2 GB and 16 GB
Equal to the size of the RAM
More than 16 GB
16 GB
Maybe you are looking for
-
HT2534 CREATING AN APPLE ID ACCOUNT WITHOUT A CREDIT CARD for a teenager
Trying to create an Apple ID so that a 13 year old can have her own account but I do not want it to have a credit card tied to it but when I try to activate an account with the teenager credentials it is asking for a credit card number and I even did
-
PHP won't recompile, no matter how I try
Hello, In March, I installed PostgreSQL on my computer, and I recompiled PHP with the --with-pgsql option to take advantage of this. I don't remember the exact date, but it must have been within a couple days of March 9th, since that's when all my re
-
Hello, 1.What are the settings for the payment medium? 2.please can any one explain the payment medium format ? 3.suplement format? Regards, kenstar
-
Hi All, Before applying India Localization patch using indpatch.pl do we have to stop apps services, and enable maintanence mode while DB is up and running? Please suggest. Regards, SK
-
Best Practice ECC RF SAP Console
Hi, I am looking for an abap best practice guide for SAP Console on ECC6. Anyone know a link? Copy all SAPLLMOB or as each screen required, screen development etc..... Thanks, Kroc.