Bypass login and password in Sun Server

We have a Sun Microsystem Server Sunfire V210 that we want to get to the OS. It is requiring for us to enter a login and password, which we cannot find. Any suggestions out there in bypassing the login and password or obtaining a bootable media to bypass?

Hi,
Try this document:
What to Do If You Forgot the Root Password - System Administration Guide: Advanced Administration

Similar Messages

Saving login and password of the server in MD5-Challenge

I want to authenticate the server automatically using MD5-Challenge with Cisco Secure ACS4.1.
When I unplugged and plugged the network cable, it always prompt for login and password.
How can I avoid this process?
What can I do if I want to have authentication automatically at the start-up of my server.
Note: All the fonctionnality of the ACS server is OK

This is a function of the server. How this will work, if at all, depends on which type of server you have.
Which server, which network device and what scenario are you using with MD5?

Conference link with login and password included

Hi,
I have been trying to find a way to make Adobe Connect send meeting invitation e-mails with login and password included in the link - unfortunately to no avail.
Does anyone know, if it's at all possible to do it and if so, how it's done?
I'm still on a trial version, but I've been assured, that it shoudn't be a problem.
Thanks in advance for any hints!
Kamil

OK, I played with it and here is how I got it to work:
Appending the URL:
The URL would need to be appended with /?login=username&password=password. The "api/xml?action=" string was incorrect. I verified that this does work.
The full URL would look similar to this: http://realeyesconnect.adobeconnect.com/bestroomever/?login=myusername&password=drowssap
The login can also be done programmatically.You would need to do the following steps to get the log-in to be automatic.
Log the individual into the server:http://YourServerURL/api/xml?action=login&login=username&password=password
Should return a value of OK
Get the BREEZESESSION cookie for the user:
http://YourServerURL/api/xml?action=common-infoShould show a value similar to this:<cookie>na3breezr59qzu2pp2qy4zdm</cookie>
Log the user in to the room with the cookie:http://YourServerURL/RoomLink/?session=na3breezr59qzu2pp2qy3zdm
Guest names can also be added to the url link. These options are described here: http://help.adobe.com/en_US/connect/9.0/webservices/WS5b3ccc516d4fbf351e63e3d11a171dd2d4-7 ff4_SP1.html

Username and password for Sun Access Manager 7.1

Hi
Thank you for reading my post
I ge the new Java Application Platform SDK Update 2 which has access manager and portlet management inside it.
Can you tell me what is username and password for Sun access Manager 7.1 administration cosole?
thanks

with me it was amadmin : admin123
in the readme file in the addons directory:
Done! Access the AM server URL and see if the Access Manager is working or not -
<amserver_protocol>://<amserver_host>:<amserver_port>/amserver
user : 'amadmin', password : <admin password>
in a config file i found the password was admin123

Send Email for manager of the user with Login and Password the user.

Hello everyone,
I need to send an email to the manager of the user with login and password when it is created in AD.
I already have a mail server configured in the IT Resource. It has some component of the IDM that solve this issue?
Anyone you help me with the next steps?
Thank you.

Thank you for your attention.
It did not work, I did another test to send email notifying you when the User change password.
The following error message appears in oim_server1-diagnostic.log:
[2011-08-08T19:21:30.865-03:00] [oim_server1] [NOTIFICATION] [] [oracle.iam.passwordmgmt.impl] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 88a924181f586e03:-25ab9c82:131aa884464:-8000-0000000000008862,0] [APP: oim#11.1.1.3.0] Resetting password
[2011-08-08T19:21:30.936-03:00] [oim_server1] [NOTIFICATION] [IAM-0080013] [oracle.iam.platform.kernel.impl] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 88a924181f586e03:-25ab9c82:131aa884464:-8000-0000000000008862,0] [APP: oim#11.1.1.3.0] Kernel executing default validation with process id, event id, entity and operation 59,612.0.User.RESET_PASSWORD
[2011-08-08T19:21:31.155-03:00] [oim_server1] [NOTIFICATION] [IAM-3050013] [oracle.iam.identity.usermgmt.impl] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 88a924181f586e03:-25ab9c82:131aa884464:-8000-0000000000008862,0] [APP: oim#11.1.1.3.0] Searching for users with the specified criteria.
[2011-08-08T19:21:32.018-03:00] [oim_server1] [WARNING] [] [oracle.iam.passwordmgmt.impl] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 88a924181f586e03:-25ab9c82:131aa884464:-8000-0000000000008862,0] [APP: oim#11.1.1.3.0] Sending Reset Password Notification is not successful
[2011-08-08T19:21:32.639-03:00] [oim_server1] [NOTIFICATION] [IAM-0080046] [oracle.iam.platform.kernel.impl] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 88a924181f586e03:-25ab9c82:131aa884464:-8000-0000000000008862,0] [APP: oim#11.1.1.3.0] Completed orchestration with action result - oracle.iam.platform.kernel.vo.EventResult@4fe0d018
[2011-08-08T19:21:32.642-03:00] [oim_server1] [NOTIFICATION] [IAM-0080011] [oracle.iam.platform.kernel.impl] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: oiminternal] [ecid: 88a924181f586e03:-25ab9c82:131aa884464:-8000-0000000000008862,0] [APP: oim#11.1.1.3.0] Orchestration process with id 59,612 started running in a new thread.
Edited by: Piza on 08/08/2011 15:24
Edited by: Piza on 08/08/2011 15:26

Console login and password

after installing my new solaris 10 x86 platform, the system asks for a console login and password when I have not set any.thus it makes it difficult to boot

Hello Michael,
the username is root and the password is the one you assigned during installation.
If you can't remember what you assigned, boot from cdrom into single-user mode, mount the / slice and clear the password entry in /etc/shadow.
Maybe you assigned no password at all. Just press enter.
To use SMC (Sun Management Console) a password is required ! Assign a new one with the passwd command.
Michael

Somehow firefox now opens with my windows mail. Each time I enter my password it asks if I want to save it so I don't have to retype my login and password each time. I hit yes and when I leave firefox it doesn't keep my password. I would like to either

I recently went to open my windows live mail,which normally opens because it has my login and password saved. Now it opens in firefox and I have to retype my login and password everytime I open my mail. I would like when I open my mail not to have to retype my login and password as this is why I have it set up in the original windows mail anyway. So I have attempted to live with this problem by adjusting the options to save my password and when I close out of firefox and try to reopen it later in the day I have to retype my login and password again.
== This happened ==
Every time Firefox opened
== about a month ago

See this article for some suggestions: [[Firefox has just updated tab shows each time you start Firefox]]
See also http://kb.mozillazine.org/Preferences_not_saved and Preferences are not saved

Do i need a separate appleID and password for itunes store, icloud and app store apart from my admin login and password?

after having my mbp upgraded with new m.lion by apple tech service i noticed that applications like iphoto, garageband and imovie are gone
researched online and was told that i had to acess the `purchase` via AppStore where it asks me to log in with Apple ID and password
i used the usual admin login and password and didnt work, also on itunes and icloud the similar case
do i need to register with a separate appleID and password for itunes store, icloud and app store apart from my admin login and password?

Just use the same Apple ID and password that you used to access this forum - that's your Apple ID.
The user name and password on your computer has nothing to do with your Apple ID.
Good luck,
Clinton

Printer is asking for an user acces code instead of windows login and password?

I have been seeing the HP printers asking(LaserJet M4555 MFP, LaserJet 500 color MFP M575 etc) for user access code instead of windows login and password.
One thing i have noticed is that when this happens there is a slight change in the EWS page configuration at security -> access control.The device administrator tabe is unchecked as you can see below ehen this happens
Have tried cold resetting the printer and restore facory settings but this does not works and some thimes it does works for a while but the issue is returing back.
We do not need this access code promt instead we need the usual windows login and password that used be there originally.
alsothis is how the settings look like after a cold reset somtimes when it does not asks for user access code , the problem is cold rese does lways works and it reverts back ois original settings

@munish259272
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

When I logon to iTunes on my iPad it takes my login and password but the apps I'm trying to download don't install?

When I log on to iTunes on my iPad to install apps iTunes accepts my login and password but doesn't download the apps. How do I fix?

Were thse apps you're downloaidng fresh or updating them?

Enter your name and password for the server when trying to connect PC and Mac?

I'm trying to connect my iMac and my WIndows tablet (got it for free) together through my home network. I open iPhoto, then "Import to Library" ; the connection fails and when I click on "Connect as" up pops this box asking me to "enter your name and password for the server -computer name here-". HELP!! Where do I find the password? I've tried everything possible and no go.
I am running Windows 8 and Lion.

Hi Tom! Welcome to the Apple discussions. You have posted in the forum dedicated to the application Appleworks. Your question is better to post in the forum for MacOs 10.6. In that forum you have several sub-forums to choose from.

How to remove "Enter your name and password for the server"

Hi there,
I have a Mac Book Pro from 2008. I have mountain lion running on it.
We used to have a server (pc) in the office that I connected to and stored all of my photos and videos etc.
We have jsut upgraded to a new server and this connects great!
However, ever since the switch, when i open keynote, imovie or iphoto i get the error message:
"Enter your name and password for the server "192.168.0.10".
(it is trying to connect to the old server)
I have tried a bunch of fixes online but i dont think they are relevant for this issue - or i cant find what they want tme to change or remove.
Any help would be great! having this pop up while trying to create things slows everything down.
thanks!!

Hi Tom! Welcome to the Apple discussions. You have posted in the forum dedicated to the application Appleworks. Your question is better to post in the forum for MacOs 10.6. In that forum you have several sub-forums to choose from.

How to hide login and password transported in interface ?

Hi !
        In the current project that I´m working, the customer is developing a website in .Net and intend to use XI to communication between website and ECC 6.0. One of their needs is to create an interface to call a RFC in ECC 6.0 to validate login+password provided in the website(they created a Z table to persist login data, and a RFC to receive login and password and check in this table).
        My problem is, to solve this situation, I would use a simple sincronous interface but, the login+password information will be logged into monitoring screens of XI, and it´s not desireble, so I´m finding a way to hide this information.
        Initially, I was thinking to make 2 adapter modules, 1 to be used joined to the Sender SOAP Channel that will be used to the website call, that could get the data send by the website and encrypt it, to be sent to the XI pipeline encripted(only the fields login and password), and the 2nd to be used joined to the RFC Receiver channel, to decrypt login and password to be sent to the RFC call. Another alternative that I found was to use the MessageTransformBean and XLST mapping + java, but I´m looking for another alternatives.
        Somebody knows if there are some way to achieve this(hide some information in a message being processed by XI)?
        In time, I can´t to disable the logging of syncronous interfaces, because it´s customer requirement.
        Any help is welcome !
        Thank you in advance, and best regards,
        Wilson

Hi !
        I have solved the problem.
        I used to develop 2 adapter modules, one to intercept the message arriving to SOAP Sender communication channel, encrypt the content of parametrized fields(in the module tab of the comm. channel) and deliver the updated message to the processing chain of the comm. channel.
        This message is so processed correctly by the XI pipeline, and delivered to the RFC Receiver Comm. Channel. I developed another adapter module to receive the data sent to the receiver RFC Comm. Channel, decrypt the contents of parametrized fields(like the another module, parametrized in the module tab), and deliver the updated message to the processing chain of the comm. channel.
        After some tests, I verified that the message doesn´t remain logged unencrypted into XI(I checked Message Monitoring for Adapter Engine at Runtime Workbench, and the SXI_MONITOR trn).
        Like mentioned by Jaishankar, the SOAP Adapter initially didn´t accepted the module adapter that I wrote following the stardards existing in several documents about adapter modules here in SDN, but after some research, and debbuging sections of the adapter module, I achieved to develop the correct code to work.
        Thank you for your attention, and best regards,
        Wilson

No CD, can't change admin login and password???

Hi...Please help. I do not have a startup disk and cannot change the aministrator login and password...what do I do?

Hi skyjac, and a warm welcome to the forums!
Reset OS X Password Without an OS X CD...
http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/
Admin Hack...
http://www.hackmac.org/?q=node/4
Starts up like the first time you buy a new Mac, but after filling in all that info again, you should have access to the computer and the other Users & files will still be there... though I was just thinking, this new User probably shouldn't be the same name as an existing one.
If that doesn't work for you (and some users have reported it has not worked for them), try Niel's procedure Making the Setup Assistant reappear.
http://discussions.apple.com/thread.jspa?messageID=607547
I lost my admin user (Mac OS X 10.4 and earlier) ...
http://discussions.apple.com/thread.jspa?threadID=121786&tstart=0

FTP login and password are not saved on some sites

On some of my sites the FTP login and password are not saved
(even though the "saved" box is checked). Dreamweaver 8.0 on XP
SP2. I can export the site information and then import the same
file exported and there still will be no login or password placed
in the login or password window. I opened the exported .ste files
in notepad and found the login correct and the password incorrect.
I uninstalled Dreamveaver and reinstalled still same
problem.

Ok, I just spent about 3 hours on this. Here's the latest
that I've found. I had looked at the knowledgebase and my registry
matched what was suggested. As this has been an ongoing issue for
me, I thought it was still an issue. Apparently 8.02 did have some
improvements.
I can only guess that many of the 36 sites I have in the Site
Manager lost info before the .02 update.. or I hope so.
I did however discover that there is still what could be
considered a minor bug. I went in to Manage Sites and selected edit
for all of my sites, fixing the ones that had lost their user/pass
info. I'm not positive, but I think only the last edited site kept
it's data.
I discovered after many checks on all the sites, over and
over and over, that it appears that they are now holding the data,
but, if I add the user/pass, I must not only click the OK button to
close that particular site, but I must also click the 'Done' button
before only that one will be saved.
So, I thought I was fixing logins when in fact I was only
fixing one at a time.. Completely closing 'Manage Site' seemed to
hold one new set of login data each time. Seems that it shouldn't
be this way.
But I must say, I am rejoicing at the moment, as I actually
have all my sites set up with FTP info and I am now looking forward
to hopefully adding more and maybe they'll actually be available
for the next editing session.

Bypass login and password in Sun Server

Similar Messages

Maybe you are looking for