Bypass Prerequisits Check errors for packages

Trying to install 11gR2 on a Desktop PC with Debian 'squeeze' (ver. 6) OS . Installed all required packages suggested. However, am now stopped at the Prerequisite Checks mainly because all the package versions listed as errors (29 packages) are more current than those require by the install. I was hoping not to go back, download and install older versions of the packages. Is there a way to bypass these errors?

Hi;
Trying to install 11gR2 on a Desktop PC with Debian 'squeeze' (ver. 6) OS . Installed all required packages suggested. However, am now stopped at the Prerequisite Checks mainly because all the package versions listed as errors (29 packages) are more current than those require by the install. I was hoping not to go back, download and install older versions of the packages. Is there a way to bypass these errors?Debian is not supported, its mean you could hit many error message during installation and also after installation, i suggest use OEL distro(free) instead of Debian
Regard
Helios

Similar Messages

Prerequisites check error for English language pack

Hi All,
We are installing Diagnostics Agent on Windows Server 2008 R2 Enterprise.
While installing in prerequisites checker we are getting error about language pack.
The error log from sapinst_dev is as follows:
TRACE 2011-11-22 12:29:46.571
tPRCResults.insertRow(), inserting
We have already installed SAP Solution Manager 7.1 on that server. But now It is showing error.
In Region And Language of OS it is showing English (United States)
Please help us to solve this issue.
Thanks & Regards,
Ishan

Hi,
As per your question:
message:Make sure that the English language pack is installed on your operating system so that your support requests can be handled quickly.
I am sure your English Language Pack is already Installed in your Server,So you have to IGNORE the message and move forward
with your Diagnostic Agent Installation.
Thanks & Regards
Ajitabh

Conflict checking issues for package

Trying to install SMCsubv144 on a server in the global zone. I get the following:
root@xxxxxxx(pts/3):/tmp# pkgadd -d ./subversion-1.4.4-sol10-sparc-local
The following packages are available:
1 SMCsubv144 subversion
(sparc) 1.4.4
Select package(s) you wish to process (or 'all' to process
all packages). (default: all) [?,??,q]:
## Verifying package <SMCsubv144> dependencies in zone <xxxxxx1>
## Verifying package <SMCsubv144> dependencies in zone <xxxxxx2>
## Verifying package <SMCsubv144> dependencies in zone <xxxxxx3>
## Verifying package <SMCsubv144> dependencies in zone <xxxxxx4>
## Verifying package <SMCsubv144> dependencies in zone <xxxxxx5>
## Verifying package <SMCsubv144> dependencies in zone <xxxxxx6>
Conflict checking issues for package <SMCsubv144> on zones <xxxxxx1, xxxxxx2, xxxxxx3, xxxxxx4, xxxxxx5, xxxxxx6>.
Do you want to continue with the installation of <SMCsubv144> [y,n,?] n
Installation of <SMCsubv144> was terminated due to user request.
When I choose y to continue, I get into a loop of the following questions:
Do you want to continue with the installation of <SMCsubv144> [y,n,?] y
attribute change for /usr/local/bin <package> on SMCsubv144 <zone>
Do you want to continue with the installation of <SMCsubv144> [y,n,?] y
attribute change for /usr/local/doc <package> on SMCsubv144 <zone>
Do you want to continue with the installation of <SMCsubv144> [y,n,?] y
attribute change for /usr/local/include <package> on SMCsubv144
<zone>
Do you want to continue with the installation of <SMCsubv144> [y,n,?] y
attribute change for /usr/local/lib <package> on SMCsubv144 <zone>
Do you want to continue with the installation of <SMCsubv144> [y,n,?] y
attribute change for /usr/local/man <package> on SMCsubv144 <zone>
Do you want to continue with the installation of <SMCsubv144> [y,n,?] y
attribute change for /usr/local/man/man1 <package> on SMCsubv144
<zone>
Do you want to continue with the installation of <SMCsubv144> [y,n,?] y
attribute change for /usr/local/man/man5 <package> on SMCsubv144
<zone>
Do you want to continue with the installation of <SMCsubv144> [y,n,?] y
attribute change for /usr/local/man/man8 <package> on SMCsubv144
<zone>
and that goes on and on until I answer n. And never specifies which zone it's talking about...just <zone>.
I've successfully installed the same pkg on a non-zoned server. Also tried SMCsubv143 and got the same error. So the pkg is ok, it appears a problem with the zones and/or /usr/local.
Thanks for any info.
mk

You could also try using an admin file that should answer those questions for you
I usually use something like:
mail=
instance=unique
partial=ask
runlevel=ask
idepend=nocheck
rdepend=ask
space=ask
setuid=nocheck
conflict=nocheck
action=nocheck
basedir=default

Errors for PACKAGE BODY WWV_FLOW_CUSTOM_AUTH_SSO

Hi All,
Running the below package so I can configure SSO...running into the below error.
Any help is appreciated
SQL> @custom_auth_sso_902.plb;
...wwv_flow_custom_auth_sso
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY WWV_FLOW_CUSTOM_AUTH_SSO:
LINE/COL ERROR
0/0 PL/SQL: Compilation unit analysis terminated
1/14 PLS-00304: cannot compile body of 'WWV_FLOW_CUSTOM_AUTH_SSO'
without its specification

You need to ask Apex related questions in the Apex forum.
Include the 4 digit Oracle and Apex versions you are using when you post your problem.
I assume that you have read how to implement SSO for Apex applications to be partner applications for Oracle App Server single sign-on authentication? If not, I suggest that you search http://tahiti.oracle.com for the relevant instructions. (cannot recall the exact manual reference - I did this 3 or 4 years ago myself)

Conflict checking issues for package XYZ on zones a, b, c

Hello.
I'm trying to install postfix from Blastwave on a Solaris 10 U4 Sparc system with two non-global zones installed. To do that, I do:
adm@winds02 ~ $ sudo pkg-get -i postfix
No existing install of CSWpostfix found. Installing...
Pre-existing local file postfix-2.2.8,REV=2006.03.13-SunOS5.8-sparc-CSW.pkg.gz matches checksum
Keeping existing file
Analysing special files...
## Verifying package <CSWpostfix> dependencies in zone <ldap-client>
## Verifying package <CSWpostfix> dependencies in zone <ldap-server>
Conflict checking issues for package <CSWpostfix> on zones
<ldap-client, ldap-server>.
Do you want to continue with the installation of <CSWpostfix> [y,n,?] How do I find out, which issues there are supposed to be?
Thanks,
Alexander

You could also try using an admin file that should answer those questions for you
I usually use something like:
mail=
instance=unique
partial=ask
runlevel=ask
idepend=nocheck
rdepend=ask
space=ask
setuid=nocheck
conflict=nocheck
action=nocheck
basedir=default

XdbConfiguration.sql giving errors for package XDB_CONFIGURATION

Hi,
I am getting following errors(at the bottom) while running xdbConfiguration.sql before installing the demo.
I am logged in as sys user(sysdba) and using running
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
on Windows2000.
Is the wrong version of Oracle. Do I have have 9.2.4.0.
Thanks in advance for help.
Om Soni
Errors for PACKAGE BODY XDB_CONFIGURATION:
LINE/COL ERROR
51/6 PL/SQL: Statement ignored
51/54 PLS-00302: component 'DELETE_FORCE' must be declared
56/4 PL/SQL: SQL Statement ignored
56/20 PL/SQL: ORA-22970: name does not correspond to an object view

Hi ,
I upgraded to 9.2.0.4.0. The error still shows up while running the xdbConfiguration.sql.
The following errors show up:
Errors for PACKAGE BODY XDB_CONFIGURATION:
LINE/COL ERROR
51/6 PL/SQL: Statement ignored
51/54 PLS-00302: component 'DELETE_FORCE' must be declared
56/4 PL/SQL: SQL Statement ignored
58/9 PL/SQL: ORA-00942: table or view does not exist
I got rid of first two error by removing dbms_xdb.DELETE_FORCE from line
dbms_xdb.deleteResource(targetResource,dbms_xdb.DELETE_FORCE);
Last two error are at line :
select make_ref(DATABASE_SUMMARY,'DATABASE_SUMMARY')
into xmlref
from DATABASE_SUMMARY;
Looking at the script DATABASE_SUMMARY is not a object.
May be the script has a bug in it.
-Om

Host agent check errors for host

Dear All,
We have recently installed PI 7.4 system. While configuring in SolMan 7.1. i am facing issue that "Host agent check errors for host "
Managed System Configuration - >Assign Diagnostics Agents.
Kindly help me out..
Regards
Jay

Hi Jay,
Please confirm ownership & permission for directory /usr/sap/hostctrl .For ref please follow SCN link Problem with connecting SAP Host Agent
After that retry the phase.
Regards,
Gaurav

Extended sytax check error for messages

Hi I am doing a Extend syntax check for a report and i am getting fowloing error for the messages displyed in report. in the report the stranded message class' MESSAGE ID 00' is used. i am getting this error in extended check:
No. of WITH fields of MESSAGE 398 for ID 00
TEXT-001
No. of placeholders in this message: 4
Message: & & & &
Highest placeholder number in long text: 4
Long text:
&CAUSE&
Please suggest me how to correct the same. i tried taking the text element but too i am getting this messages.
plz help me
mahesh

Hi Mahesh,
The message number 398 of message class 00 has four place holder, which means its expecting you to pass 4 values in message statement. It seems you are pass just one parameter after TWITH .
You can either pass SPACE for rest of parameters as
MESSAGE s398(00) WITH 'TEST' space space space.
or you can hide the message with "#EC *
MESSAGE s398(00) WITH 'TEST' . "#EC *

Exchange 2010 prerequisites check errors

Summary: 6 item(s). 5 succeeded, 1 failed.
Elapsed time: 00:00:33
Configuring Prerequisites
Failed
Error:
The following error was generated when "$error.Clear();
          if($RoleInstallWindowsComponents)
            # Install any Windows Roles or Features required for the Management Tools role
            Install-WindowsComponent -ShortNameForRole "AdminTools" -ADToolsNeeded $RoleADToolsNeeded
        " was run: "The system cannot find the file specified".
The system cannot find the file specified
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=ms.exch.err.Ex88D115&l=0&cl=cp
Elapsed Time: 00:00:02
Organization Prerequisites
Completed
Elapsed Time: 00:00:13
Languages Prerequisites
Completed
Elapsed Time: 00:00:02
Hub Transport Role Prerequisites
Completed
Warning:
Installing Exchange Server on a domain controller will elevate the privileges for Exchange Trusted Subsystem to domain administrators.
Elapsed Time: 00:00:05
Client Access Role Prerequisites
Completed
Warning:
Installing Exchange Server on a domain controller will elevate the privileges for Exchange Trusted Subsystem to domain administrators.
Elapsed Time: 00:00:04
Mailbox Role Prerequisites
Completed
Warning:
If Microsoft Outlook 2003 is in use, you should replicate the free/busy folder on this server to every other free/busy server in the organization. This step should be performed once Setup completes.
Warning:
Installing Exchange Server on a domain controller will elevate the privileges for Exchange Trusted Subsystem to domain administrators.
Elapsed Time: 00:00:05
Any suggestions. I believe it has something to do with missing AD roles and features.
Server OS: Windows Server 2012 Standard

Martina is correct.
And you may also want to re-evaluate installing onto the DC.
http://blogs.technet.com/b/rmilne/archive/2013/07/03/exchange-on-a-dc.aspx
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Prerequisite checks fails for the oracle 11g r2 in win7 Ultimate 64-bit

Hi all, I am trying to install Oracle 11 g Release 2 in Windows 7 Ultimate 64-bit and the prerequisite checks are failed.
The checks Physical Memory, Available Physical Memory, Swap size, Free Space: .../temp; and all the other checks also failed.
My laptop configurations are
Processor : Intel Core i-3 CPU
RAM: 4GB
O.S: Win 7 Ultimate Service Pack 1
Do I have to Ignore the checks go head with the installation. Plz let me know.

938825 wrote:
Hi all, I am trying to install Oracle 11 g Release 2 in Windows 7 Ultimate 64-bit and the prerequisite checks are failed.
The checks Physical Memory, Available Physical Memory, Swap size, Free Space: .../temp; and all the other checks also failed.
My laptop configurations are
Processor : Intel Core i-3 CPU
RAM: 4GB
O.S: Win 7 Ultimate Service Pack 1
Do I have to Ignore the checks go head with the installation. Plz let me know.follow Installation Guide
http://www.oracle.com/pls/db112/portal.portal_db?selected=11&frame=

Sp1 upgrade to R2 and bypass Prerequisite Check

It is possible to disable,bypass or adapt the check?
I want to start with the upgrade R2 in a good working test envoirement. But I get an error:
"You must specify a valid FQDN for the SQL Server computer."
SQL server is installed locally and the services are started with a domain user account.
There is no error in the production envoirement with the same check. So I dont want to spent a lot of time
on this problem.

Log is showing this:
2014 21:16:13> ERROR: getaddrinfo failed with error: 11003.
<04-23-2014 21:16:13> SCCMTST01.XXXX.nl; Validate FQDN of SQL Server Computer; Error; You must specify a valid FQDN for the SQL Server computer.
<04-23-2014 21:16:13> INFO: The rule 'Primary FQDN' has been run on server 'SCCMTST01.XXXX.nl', skipped.
Local rights and sysadmin for computer and domain account are okay.

Error for package com.sap.aii.mapping.lookup

Hi All
I am writing a code for the DB lookup. When I import the package in the Message
Mapping (Advance Function) I am getting an Error.
C:/usr/sap/SXI/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map6af6f7d1335111dc9b51000c2967ead8/source/com/sap/xi/tf/_MM_File2JMS_.java:3: package com.sap.aii.mapping.lookup does not exist
import com.sap.aii.mappingtool.tf3.;import com.sap.aii.mappingtool.tf3.rt.;import java.util.;import java.io.; import java.lang.reflect.;import com.sap.aii.mapping.lookup.; ^
C:/usr/sap/SXI/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map6af6f7d1335111dc9b51000c2967ead8/source/com/sap/xi/tf/_MM_File2JMS_.java:57: cannot resolve symbol symbol : class Channel location: class com.sap.xi.tf._MM_File2JMS_ Channel channel = null;
C:/usr/sap/SXI/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map6af6f7d1335111dc9b51000c2967ead8/source/com/sap/xi/tf/_MM_File2JMS_.java:58: cannot resolve symbol symbol : class DataBaseAccessor location: class com.sap.xi.tf._MM_File2JMS_ DataBaseAccessor accessor = null; ^
Thanks
Farooq.

Hey satish I am getting same Error:
C:/usr/sap/SXI/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map7801d381335311dc8660000c2967ead8/source/com/sap/xi/tf/_MM_File2JMS_.java:3: package com.sap.aii.mapping.lookup does not exist import com.sap.aii.mappingtool.tf3.;import com.sap.aii.mappingtool.tf3.rt.;import java.util.;import java.io.; import java.lang.reflect.;import com.sap.aii.mapping.lookup.;import java.io.*; ^ C:/usr/sap/SXI/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map7801d381335311dc8660000c2967ead8/source/com/sap/xi/tf/_MM_File2JMS_.java:57: cannot resolve symbol symbol : class Channel location: class com.sap.xi.tf._MM_File2JMS_ Channel channel = null; ^ C:/usr/sap/SXI/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map7801d381335311dc8660000c2967ead8/source/com/sap/xi/tf/_MM_File2JMS_.java:58: cannot resolve symbol symbol : class DataBaseAccessor location: class com.sap.xi.tf._MM_File2JMS_ DataBaseAccessor accessor = null; ^ 3 errors

Product specific prerequisite checks error

Hi,
I have installed oracle database 11g linux 64-bit which is 11.1.0.6 and i need to upgrade it into binary 11.1.0.7
so i have downloaded the patches 6890831 and 7829321 from metalink and i have unzipped it and proceeded to apply the patch 6890831
Then prerequitics checks has 1 error like this
Checking for Oracle Home incompatibilities...............
Actual Result: NEW_HOME
Check complete.the overall result of this is failed<<<<
But i have specified my oraclehome correctly
What to do

What to do is to post the full and complete log showing us the actual errors rather than just your impression of them.
The fact that you chose the correct ORACLE_HOME is not relevant to the message.
The installer looked at that home and found a problem that it will not ignore and you shouldn't either.

Extended program check error for cl_salv_table= factory

hi all,
when performing Extended Program check, I am getting some warning message
code
    DATA: lc_msg TYPE REF TO cx_salv_msg.
*. Create Instance for ALV
TRY.
      CALL METHOD cl_salv_table=>factory
        IMPORTING
          r_salv_table = go_alv
        CHANGING
          t_table      = ts_z3rl_docket.
    CATCH cx_salv_msg INTO lc_msg .
ENDTRY.
Error message;
No Exception Handling After the CATCH Statement
(The message can be hidden with "#EC NO_HANDLER)
how to handle this message?? how to recitfy this?
kindly help

Basically, this message appears because, you are trying to CATCH the exception in the exception object, but you are not accessing this exception object. If you do want to give the message, if you catch some exception, you should do like this:
*. Create Instance for ALV
TRY.
CALL METHOD cl_salv_table=>factory
    IMPORTING
       r_salv_table = go_alv
    CHANGING
      t_table = ts_z3rl_docket.
CATCH cx_salv_msg INTO lc_msg .
     lv_string = lc_msg->get_text( ).   " <
     message lv_string type 'I'. "<
ENDTRY.
Or, if you don't want to handle the exception, you can do like this:
TRY.
CALL METHOD cl_salv_table=>factory
     IMPORTING
       r_salv_table = go_alv
     CHANGING
       t_table = ts_z3rl_docket.
CATCH cx_salv_msg.      "#EC NO_HANDLER
ENDTRY.
Regards,
Naimesh Patel

Using MEREQ001 u2013 Checking error for data in customer data tab.

Hi Guys,
I have implemented MEREQ001 enhancement to add custom field in CUSTOMER DATA tab at item level. I want to validate the custom fields for error and display RED dot in front of the line item number when user press SAVE button.
I am using EXIT_SAPLMEREQ_005 for validating the custom field when user press SAVE button.
Is this the correct exit for this requirement.
Can somebody share to code to display the RED dot in front of the line item which has error in custom fields?
Thanks in advance.

I think it's right
U need to tranfer the message to exporting parameter or raise an error message

Bypass Prerequisits Check errors for packages

Similar Messages

Maybe you are looking for