Bypass "Project Too Large" for iMovie YouTube Publishing?

Hello,
When attempting to upload a YouTube video over 10 minutes using iMovie, it will not allow me saying that the Project is too large and must be under 10 minutes. The thing is, I am able to upload video over 10 minutes because I signed up to YouTube when they allowed over 10 minute videos. I can still upload the videos if I do it manually but I wish there was a way to bypass this in iMovie. Any tips or suggestions besides telling me to do it manually?
Thanks.

Hi y'all,
I am having a simlar issue with iMovie for iPad.
My files are way to big to export.
The fileis is 2.4GB and I can only export 500MB to Vimeo.
It's 63 mins and I can only export 15 mins to youtube!
I recorded a video diary and have clipped the file/project in the original project/timeline in to day recordings. I have been unable to find a way to export those individual clips (day recordings) in to separate folders. I was hoping I could export individual clips in to sepearate folders then export them.
I hope this makes sense?
If it does please let me know if this possible with imovie for iPad?
Thank you!

Similar Messages

IMovie Project too Large posting to Youtube

My Youtube account is approved for more than 15 minutes and greater than 20GB, yet iMovie tells me It's too large, and that it needs to be under 15 mins and under 2GB. Is this a restriction with iMovie?
Dave

Hi y'all,
I am having a simlar issue with iMovie for iPad.
My files are way to big to export.
The fileis is 2.4GB and I can only export 500MB to Vimeo.
It's 63 mins and I can only export 15 mins to youtube!
I recorded a video diary and have clipped the file/project in the original project/timeline in to day recordings. I have been unable to find a way to export those individual clips (day recordings) in to separate folders. I was hoping I could export individual clips in to sepearate folders then export them.
I hope this makes sense?
If it does please let me know if this possible with imovie for iPad?
Thank you!

I am trying to upload an imovie to youtube. it says project too large but i have permission for larger projects. Help and thanks.

I am trying to upload an imovie to youtube. It keeps saying "project too large" even though I have permission from youtube for over 15 minutes. Please help. Thanks.

share the video via a quicktime movie in whatever format you want to use, I usually create an mp4. Once you that video is set (I usually save to my desktop) go ahead and upload from YouTube rather than going direct from iMovie. I suspect you will not have the same size issue.

How to backup an iMovie project that is too large for the dvd?

This may be obvious, and it was probably answered elsewhere, but I'm trying to clean off my hard drive by saving my iMovie projects to two sets of dvds (one for home and one set for safekeeping at work). When saving one project as an archive, it just says this project is too large for a disc. Is it possible to stuff it as a .sitx file and then save that onto dvd? Is there a better solution than an external hard drive (which I've had a couple of fail on me).

DVD's can only hold about 4.7 GB's of DV Stream format (the format used by iMovie).
DV Stream is 13 GB's per hour of recording so it would take 3 DVD's to "store" your data for a one hour capture.
"Export" (back to tape) or use iDVD to "burn" an MPEG-2 version of your file.
Only the "tape" version would not require some type of conversion on import.

I am having trouble with a video. I have tried to copy it to a flash drive because it is too big to fit on a DVD, it says it is too large for the volumes format. Please advise.

I have done many DVD's for seniors for graduation so I am familier with Imovie. I have just finished a projec that is a combination of video, music and stills. I shared it through idvd. Now I can't burn it to a dvd because it is too large. It is too big even for a two sided disk. I have researched it and i find that blue ray would be big enough. Does apple offer blue ray burner? if so, what is the cost? I tried another route and took my external hard drive to copy it to a PC. there computer wouldn't recongize my drive. I am assuming it is because it is formated for apple. I tired copying it to a flash drive and and it says that it can't be copied because it is too large for the volume's format. Suggestions? PLEASE!!!!!

Could the video be too big because of using too high a resolution? 480p is sufficient for a DVD. the thread at:
https://discussions.apple.com/thread/5868958?tstart=30
may be of help.
Apple does not support Blue ray - you have to use a thrid party application like Toast.
To transfer the video to a PC you need a FAT-formatted hard drive (or of course a sufficiently big memory stick).
You could also go via a network, via the cloud (eg Dropbox) or with 'Wetransfer" or similar.
Geoff.

Warning:The EXPORT data cluster is too large for the application buffer.

Hi Friends,
I am getting following warning messages whenever I click on costing in "Accounting" tab.
1. Costing data may not be up to date Display Help
2. No costing variant exists in controlling scenario CPR0001
3. An error occurred in Accounting (system ID3DEV310)
4. The EXPORT data cluster is too large for the application buffer.
I can create project automatically from cprojects. PLan costs, budget and actuals maintain in WBS elements can be visible in cproject Object Links.
Your reply is highly appreciated.
Regards,
Aryan

Hi;
Please, check the Note --> 1166365
We are facing the same problem in R3, but apply this no fix it.
Best regards.
Mariano

Burning a disc but getting a too large for current selected disc media mess

Trying to burn a project on to DVD (4.7g disc) but I keep getting a message that says "Compiled project is 2835.4 MB too large for currently selected disc media. Does anyone have any ideas on this? Isn't 2835.4 MB around 2.8G. I'm confused! Should'nt this fit. Any help would be appreciated

Hi
To fit that lenght in a SL DVD you must use Compressor to encode your video and audio before importing in DVDSP. You can take the standard DVD High Quality 120 min preset and use the MPEG2 and AC3 (Dolby 2) settings, then use those files in DVDSP.
If you are currently using DVDSP as encoder, you'll get AIFF uncompressed audio what takes a lot of disc space and bitrate.
Hope that helps !
Alberto

Project too large but under 2 hrs...how do i fit?

Compiled project is 108.5 MB too large for currently selected disc media.
How do I lower the bitrate or quality to fit?

http://dvdstepbystep.com/faqs_7.php
Make the audio AC3 if you have not done so and you probably do not have to reencode video
FWIW another thread with more info/links if needed
http://discussions.apple.com/thread.jspa?messageID=5127726

Code too large for try statement - help :(

Please help :(
          We are migrating our project from an older technology, Kiva from netscape
          (and about time we migrate) . Kiva uses template evaluation similar to
          jakarta velocity. So the fastest way we found was to translate kiva
          templates to JSPs via perl script. All is working fine except a bunch of
          JSPs which are too large for the compiler to handle. If we were not
          migrating and instead wroking from scratch we would have simply made the
          JSP's size smaller and used jsp:include, but in this case it will involve a
          lot of effort as that means changing a lot of business code.
          Basically what we get is "code too large for try statement". Is there anyway
          we can tell weblogic to put smaller code fragments in try/catch when it
          converts a JSP into java code.


          Haider,
          Have you seen the following Sun Bug Parade posting
          http://developer.java.sun.com/developer/bugParade/bugs/4210912.html
          Additionally, you may want to try the '-noTryBlocks' jsp compiler switch and see
          if it makes a difference
          See the following 6.1 URL
          http://edocs.bea.com/wls/docs61/jsp/reference.html#57805
          Chuck Nelson
          DRE
          BEA Technical Support

PSE 6 slide show photos too large for TV screen

I have been collecting, scanning and saving family photos for over a year to create a slide show for my 81 yr. old Dad. I create a slide show with PSE 6, save to a CD and play on the TV. No matter what pixel size I resize the photos to they are still too large for the TV screen - not just one TV screen but different ones I try. I loose heads at the top, feet at the bottom, people on the sides. I have been researching but have not found the answer to solve my problem. Anyone have the answer or some suggestions I would be very appreciative. Thanks.
Scrap Grannie

Well, first of all, choose the right resolution and frame-rate...
Are you working in NTSC (30 fps), or PAL (25 fps)...?
Use one of the common DV formats /
if you choose HD, 1080i, then your TV must be able to recognize that format,
otherwise images get cut off...
Format Rectangular Size Square Size
DV NTSC................................................720x480.............................. ...720x540
DV PAL...................................................720x576............................ .....768x576
HDV 720p..................................................NA................................. ....1280x720
HDV 1080i.................................................NA................................. ....1920x1080
Stay with your chosen format through-out your whole project...
(PNG, TIFF or PSD), import those files into your video editor.
Depending on the Operational System (Mac or Windows), one has many choices...
http://en.wikipedia.org/wiki/List_of_video_editing_software
After editing, import those files into your chosen Authoring software for burning,
they will take care of the appropriate compression.
(I would recommend burning to DVD, not CD, one will achieve much better quality...
Regards
Nolan

Value too large for SNP_SESS_STEP_LV.START_SHORT_VALUE

Hi All,
I am using a variable for which the value is given by users in the additional variable tab of scenaio. the process runs successfully sometimes and sometimes it fails with the below error. There is no change in the value given when it is success. That too the value is very small just project name CLAIMS. Not sure from where its getting this 517 .Please help me with this
oracle.odi.core.exception.OdiRuntimeException: com.sunopsis.dwg.SQLWorkReposException: ORA-12899: value too large for column "ODIWRK02"."SNP_SESS_STEP_LV"."START_SHORT_VALUE" (actual: 517, maximum: 250)

Hi,
Are you sure that the value is too small, please confirm that by checking PARAM table.
Users would be entering the code in one of the table it will be named like PARAM(not exactly the same name, can be different. You can get the table name from the variable query which is being used) check the PARAM value which is being passed to the variable and the length of the PARAM_VALUE.

I have a 500 GB hard drive and a 1TB Time Capsule running on a MacBook Pro. It was all working well until the MacBook went in for a repair a week or so ago. Since then, TC will not perform a backup; instead, it says the backup is too large for the disk

Since having my MacBook Pro repaired (for a video problem) Time Capsule returns the following message: "This backup is too large for the backup disk. The backup requires 428.08 GB but only 192.14 GB are available."
I notice that there is also a new sparse bundle.
Since TC has my ONLY backup (going back about 4 years) I am reluctant to wipe it and start over fresh as I am afraid of losing files.
Is there a way of dealing with this?
I am using Snow Leopard 10.6.8

The repair shop likely replaced a major circuit board on your MacBook Pro, so Time Machine thinks that you have a "new" computer and it wants to make a new complete backup of your Mac.
You are going to have to make a decision to either add another new Time Capsule....or USB drive to your existing Time Capsule....and in effect start over with a new backup of your Mac and then move forward again.
For "most" users, I think this is probably the best plan because you preserve all your old backups in case you need them at some point, and you start over again with a new Time Capsule so you have plenty of room for years of new backups.
Or, as you have mentioned, you have the option of erasing the Time Capsule drive and starting all over again. The upside is that you start over and have plenty of room for new backups. The downside is that you lose years of backups.
Another option....trying to manually delete old backups individually....is tricky business....and very time consuming. To get an idea of what is involved here, study this FAQ by Pondini, our resident Time Capsule and Time Machine expert on the Community Support area. In particular, study the pink box.
http://web.me.com/pondini/Time_Machine/12.html
Once you look through this, I think you may agree that this type of surgery is not for the faint of heart. I would suggest that you consider this only if one of the other options just cannot work for you.

Cannot decrypt RSA encrypted text : due to : input too large for RSA cipher

Hi,
I am in a fix trying to decrypt this RSA encrypted String ... plzz help
I have the encrypted text as a String.
This is what I do to decrypt it using the Private key
- Determine the block size of the Cipher object
- Get the array of bytes from the String
- Find out how many block sized partitions I have in the array
- Encrypt the exact block sized partitions using update() method
- Ok, now its easy to find out how many bytes remain (using % operator)
- If the remaining bytes is 0 then simply call the 'doFinal()'
i.e. the one which returns an array of bytes and takes no args
- If the remaining bytes is not zero then call the
'doFinal(byte [] input, int offset, in inputLen)' method for the
bytes which actually remained
However, this doesnt work. This is making me go really crazy.
Can anyone point out whats wrong ? Plzz
Here is the (childish) code
Cipher rsaDecipher = null;
//The initialization stuff for rsaDecipher
//The rsaDecipher Cipher is using 256 bit keys
//I havent specified anything regarding padding
//And, I am using BouncyCastle
String encryptedString;
// read in the string from the network
// this string is encrypted using an RSA public key generated earlier
// I have to decrypt this string using the corresponding Private key
byte [] input = encryptedString.getBytes();
int blockSize = rsaDecipher.getBlockSize();
int outputSize = rsaDecipher.getOutputSize(blockSize);
byte [] output = new byte[outputSize];
int numBlockSizedPartitions = input.length / blockSize;
int numRemainingBytes = input.length % blockSize;
boolean hasRemainingBytes = false;
if (numRemainingBytes > 0)
hasRemainingBytes = true;
int offset = 0;
int inputLen = blockSize;
StringBuffer buf = new StringBuffer();
for (int i = 0; i < numBlockSizedPartitions; i++) {
output = rsaDecipher.update(input, offset, blockSize);
offset += blockSize;
buf.append(new String(output));
if (hasRemainingBytes) {
//This is excatly where I get the "input too large for RSA cipher"
//Which is suffixed with ArrayIndexOutofBounds
output = rsaDecipher.doFinal(input,offset,numRemainingBytes);
} else {
output = rsaDecipher.doFinal();
buf.append(new String(output));
//After having reached till here, will it be wrong if I assumed that I
//have the properly decrypted string ???

Hi,
I am in a fix trying to decrypt this RSA encrypted
String ... plzz helpYou're already broken at this point.
Repeat after me: ciphertext CANNOT be safely represented as a String. Strings have internal structure - if you hand ciphertext to the new String(byte[]) constructor, it will eat your ciphertext and leave you with garbage. Said garbage will fail to decrypt in a variety of puzzling fashions.
If you want to transmit ciphertext as a String, you need to use something like Base64 to encode the raw bytes. Then, on the receiving side, you must Base64-DEcode back into bytes, and then decrypt the resulting byte[].
Second - using RSA as a general-purpose cipher is a bad idea. Don't do that. It's slow (on the order of 100x slower than the slowest symmetric cipher). It has a HUGE block size (governed by the keysize). And it's subject to attack if used as a stream-cipher (IIRC - I can no longer find the reference for that, so take it with a grain of salt...) Standard practice is to use RSA only to encrypt a generated key for some symmetric algorithm (like, say, AES), and use that key as a session-key.
At any rate - the code you posted is broken before you get to this line:byte [] input = encryptedString.getBytes();Go back to the encrypting and and make it stop treating your ciphertext as a String.
Grant

Mac Mini display is too large for screen on only one user account

Okay, so I left my two year olds alone for a minute playing the "alphabet game" on my Mac Mini. They only had the keyboard, no mouse but managed to muck up my display leaving me a bit frustrated. The screen is now too large for my Samsung display. The only way to see everything (dock, top bar, etc) is to move my mouse arrow to the end of my display and see it roll back onto the page. I've checked the settings there and they are fine. The MacBook Pro plugs right in and is proper resolution. So I then wondered if another account on the Mac Mini would do the same thing. I logged out of my Admin account and into another and everything looks just dandy. I log back into my Admin account and it's too large and blurry again. The resolution is set correct at 1920x1080 at 60 Hz.
What button did they push on my keyboard that would do this and how do I get it back?? Aargh! Thanks all!

Ha, figured it out myself from another discussion forum finally. Thoght I'd share in case anyone else runs into this. They must have hit "Zoom" by htting the "Control" and scroll buttons at the same time..
Resolution:
You can zoom out by holding down the Option and Command buttons on the keyboard and, while you hold them down, pressing the - key.

Page header plus page footer too large for the page in crystal report 2008.

Hi,
when we selecting pieview and print after entering paramter it's showing error: page header plus page footer too large for the page. error in File.rpt page header or page footer loanger than page. and it's not showing print layout format if i connect another printer it's showing layout designe. and some times it's showing letter formate and if i give print it's taking default lamdscape but we setup defual setup for printer 10*12 inches in particular printer.please guide me how we can solve this issues.
regds,
samapth

This is a really hard post to read. See if you can take a bit of time to reword it, but one thing I do understand is that you are getting this error:
page header plus page footer too large for the page.
Typically, you can trust that if the error is thrown, it is true. E.g.; this is not one of those errors that says one thing, and means another. I suspect that you have some field(s) in the header(s) that grow, depending on the data. If there is too much data or the data is too long ( a text for example), the error will be thrown. To resolve this, see if placing the field(s) into a group footer / header will help.
Ludek

Bypass "Project Too Large" for iMovie YouTube Publishing?

Similar Messages

Maybe you are looking for