Bypass selecting a user and going straight to log in screen.

When i boot my computer up it comes to the Ctrl alt delete screen, like it is supposed to.  But when i press ctrl alt delete it brings me to a screen where i have to select a profile and the only profile available is "Other User".  I
want to know how to bypass that screen and go to entering the username and password immediately after hitting ctrl alt delete.

Hello tdl7,
If my understanding is right, after pressing ctrl alt del, you want to enter the username and password instead of clicking Other User.
Please take the following steps to fix this issue:
1. Run regedit and go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
2. If you have a .DEFAULT key in the left pane as a subkey under the ProfileList key, then right click on .DEFAULT, and click on Delete.
Note: please back up the registry before this change.
For more information about how to back up and restore the registry in Windows, please take a look at the following KB.
http://support2.microsoft.com/kb/322756/en-us
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Similar Messages

  • Well, I was updating my iPod Touch and it went flat while updating. Now every time I go to turn it on it says it's flat, so I charge it and when its turning on it does the apple symbol but then it flashes and goes straight to a blue screen. What can I do?

    Thats what happens to it. How you fix it?
    P.s: don't mind my screen.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       
    It also looks like your screen is badly cracked. Whatever caused that may have lead to the current problem.

  • Cannot select Preserve Users and Network Settings

    I am trying to do an Archive and Install but want to save my user settings but I cannot select "Preserve Users and Network Settings" as it is grayed out and unelectable. The question is, why?

    Have a read of this.
    http://discussions.apple.com/thread.jspa?threadID=1858697&tstart=1

  • My ipad keeps cutting out and going back to start up screen, my ipad keeps cutting out and going back to start up screen

    my ipad2 keeps cutting out and going back to start up screen?

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    Finally, if the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.

  • When using my ipad air it keeps coming off the page I'm on or app and going back to the home screen. Also when using my ipad the screen will go white with a black apple icon in the middle for about 20 seconds then it makes a ping

    When using my ipad air it keeps coming off the page I'm on or app I am using and going back to the home screen. Also when using my ipad the screen will go white with a black apple icon in the middle for about 20 seconds then it makes a ping sound and goes to the home screen. Could anyone help please. Thank you :-)

    Read here:
    http://help.apple.com/ipad/8/#/iPad9a245e3e

  • My iphone 3g stays on the apple logo for about 4 minutes then flashes white and goes back to the apple screen, it repeats untill battery is flat,  every now and then im lucky enough to get it to turn on but not very often and then it freezes and repeats??

    hello my name is kirstie, i updated to firmware 4.2.1 .....my iphone 3g stays on the apple logo for about 4 minutes then flashes white and goes back to the apple screen, it repeats untill battery is flat,  every now and then im lucky enough to get it to turn on but not very often and then it freezes and repeats the same problem?? (if i turn the phone off my pressing the two buttons it wont keep rebooting, its only when i leave it after turning it on)
    I have reset the phone, full firmware restore, even downgraded back from firmware 4.2.1 to .3.1.3 official by using dfu mode and still doesnt fix.
    (i correctly got out of dfu mode after the downgrade)
    i can enter dfu mode and recovery, and update through itunes with no problem, but it doesnt fix the problem,
    i have searched and found no answer to this problem, every option availible to try that i know of i have tried and failed. i dont care about preserving my content i just want a fix. i have a good understanding how to operate software on a computer and shouldnt be too confused by any advice given, so plz even if the answer is very complex i wish to try anything, please help me to get my iphone working.

    Anyone have any suggestions? or is everyone else just as clueless as me !

  • My safari keeps crashing and going back to the home screen

    My safari keeps crashing, shutting down and going back to the home screen. Any help would be appreciated.
    Many thanks.

    My safari keeps crashing, shutting down and going back to the home screen. Any help would be appreciated.
    Many thanks.

  • I'm new to Mac, have had for approx.  I put my iPhone and iPad and my wifes in iTunes and now when i start my system on.  I now have a Guest user show up at the log on screen.  Is this normal.  And how can I take it off.   Tried the help and no luck

    I'm new to Mac, have had for approx.  I put my iPhone and iPad and my wifes in iTunes and now when i start my system on.  I now have a Guest user show up at the log on screen.  Is this normal.  And how can I take it off.   Tried the help and no luck

    Tatanka11 wrote:
    I'm new to Mac,...
    Then...  You may find these Links of Interest and Value...
    Show me how to set up my Mac.
    http://www.apple.com/support/mac101/
    http://www.apple.com/support/switch101/     Switching from PC
    http://www.apple.com/findouthow/mac/
    Enjoy your Mac...

  • None of the apps I downloaded are opening. The screen just flashes a little, and goes back to the home screen,

    None of the apps I downloaded are opening. The screen just flashes a little, and goes back to the home screen,

    Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is 'appsolutely' safe!

  • My iPod "kicks me out" of apps and goes back to the home screen. IS there a solution for this. It esp happens while trying to play words with friends

    iPod "kicks me out" of apps and goes back to the home screen. This esp happens when using words with friends. Is there a solution?

    - See:
    iOS: Troubleshooting applications purchased from the App Store
    - Next restore from backup
    - Then try restore to factory settings/new iPod

  • When I open email it shuts down immediately and goes back to my main screen.  Any suggestions?.

    When I open email it shuts down immediately and goes back to my main screen.  Any suggestions?.

    Double tap your home button to bring up the most recently used apps (task bar).  With your finger hold it on any of the those apps until they all start to jiggle.  Each app will now show a in the upper left corner.  Touch the minus on the Mail App to fully close it.  Touch your home button once again to stop the apps from Jiggling, then again to get back to your home screen.
    I would then Reboot your iPad:  Press and hold BOTH the power and home buttons at the SAME time for at least 10 seconds (ignore the red slider to shut down) until the Apple Logo appears, then let go of both buttons and your iPad will restart. 
    Try the mail app and see if you can navigate again.
    If neither option helps, it sometimes helps to delete the mailbox, then reinstall it.

  • My iPad keeps shutting down the app I'm using and going back to the home screen

    My iPad keeps shutting down the app I'm using and going back to the home screen.
    Anyone know how to fix this?

    contact the developer of the app.

  • When I'm on a app it cuts off and goes back to the home screen what do I do

    When I'm on a apps or web it cuts off and goes back to the home screen what do I need to do

    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • Computer turns on and goes straight to gray screen telling me to restart.

    I just finished installing Leopard on my computer and I decided to do a software update. While the computer was restarting it stayed at a blue screen for a while downloading files. This was taking too long and I had a paper to do so I manually shut down the computer. Now whenever I turn my computer on it goes to a gray screen and tells me I need to restart.
    If anyone could help I'd really appreciate it

    Will it boot in Safe Mode? See
    What is Safe Boot, Safe Mode? (Mac OS X)
    http://docs.info.apple.com/article.html?artnum=107392
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck
    http://docs.info.apple.com/article.html?artnum=106214
    Will your Mac boot using the Leopard install DVD? If so, you probably need to do a reinstall of Leopard. When you reinstall the OS, do it via Archive & Install. See About the Archive and Install feature http://support.apple.com/kb/HT1710
    Be sure to select Preserve Users & Settings. Also, repair permissions before and after the install.
    A couple of Tips.
    1. Before you install an update, ALWAYS repair permissions using Disk Utility. (Did you do this?) Then after the update is installed, repair permissions again.
    2. I only use the Software Update window to determine what System related software is available for update. I don't use the auto update feature because there could be the possibility of a data "glitch" during download, which results in system startup/operational problems. Then I go to Apple site & download the update file. Then I install it.
    For an update to an application, like iTunes, I use the auto update. If there is a problem with the update, you can reinstall the application, but it doesn't cause startup problems.
     Cheers, Tom

  • Using the Import utility from other users and going to a different schema

    I has a user today with rights
    Insert into XXXX.TABLE values(); Works just fine for another schema's table which has select,insert,update,delete.
    We tried to utiile the import utility from OTHER USERS
    Insert failed ORA-00942
    Do you want ot ignore all errors
    Even though we have rights to the schema under OTHER USERS.
    When connected as the owner it works fine.

    I've be trying to find a work-around to this issue & found this old post -- I'm having the same problem.
    I'm using Oracle 11g and SD 2.1.1.64.
    I have user A with a table that grants select,insert,update, and delete privs to user B. Logging into user B I, of course, can do inserts, deletes, etc. on the the table in user A's schema.
    When I use the import data feature to load data from a CSV file I can't get it to work while logged into user B. It does work fine if logged into user A. It looks like the issue may be that it doesn't put the schema prefix of "A." on the insert statements.
    Has anyone found a way to get around this issue yet?

Maybe you are looking for