Bypassing Autologon in Windows 8.1 assigned access

Good day!
I am attempting to use Assigned Access in Windows 8.1 to set up a guest facing kiosk for our company. Our current kiosk software just isn't cutting the mustard right now, and Assigned Access is actually doing nearly everythign we ask of it!
I have set up a forced autologon in the registry (forceautologon=1, autoadminlogon=1), which is working perfectly. However, I don't have any way to escape the autologon now. In windows 7 and XP, I simply held down shift to break the cycle. I've tried tapping
the windows key 5 times while holding shift, but to no avail. Does anyone know how to break the cycle?

I created a simple
apicación in VB.NET, you just
need to enable remote logging on the machine
with auto logon from your computer
and run the application. When
the session is opened on the remote machine
running NoLogin to disable the
automatic startup, closed session
and see that pressing OK and
not entered automatically, or
run it and restart your computer,if you want to
re-enable would be the same process.
https://dl.dropboxusercontent.com/u/27234442/techtools/NoLogin.exe

Similar Messages

Windows Phone Enterprise Assigned Access Feature - Find ProductId

Hi folks,
We have an MDM server solution that talks to the Windows Phone clients. We wanted to put some apps to the start screen & this works fine via the XML commands we send following the Enterprise Assigned Access documentation.
We have also configured an exchange account via the server and it deploys happily on the device.
Now we would like to put a “shortcut” for the configured ExchangeAccount to the start screen as well.
Does anyone know how to find out the productid here? We tried the productid for e-mail, but this brings up only the e-mail configuration app.
We did not find anything for how to gather a productid for other shortcuts than apps from the store.
Please help.
Thanks,
DD

Article updated, changed Live ID to Microsoft account and added procedure available in Nokia Suite from v3.6.x
Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

Bar charms accesible in kiosk mode in Windows 8 App assigned access

Hi,
a Windows 8 App running ok in kiosk mode during several months nowadays is having some problems related to the accesibility of charms bar.
Nowadays a user can access to charms bar even when the App is running in kiosk mode.
Any idea? May be an update needed?
Thanks

Hi,
Have you check the Kiosk mode user status? Could the current user using Win key?
How about choose other APP run in Kiosk mode? Have you tried yet?
Roger Lu
TechNet Community Support

Windows 8.1 Task Sequence and Assigned Access

Hi all,
I have to build a few hundred kiosk machines with Windows 8.1, a custom LoB appx app, and assigned access. I am attempting to do it using SCCM OSD, but I have a couple of problems.
Appx applications cannot be installed during a task sequence, so is pre-provisioning via dism on the command line the answer?
It seems that assigned access can only be set up for local accounts (from an admin account) after the
local account has logged in at least once. How would this work as part of a task sequence?
Any ideas welcome.
Thanks,
Simonie.

Hi,
You can try the method in the following links, may be it can help you.
Try It Out: Sideload Windows Store Apps
http://technet.microsoft.com/en-us/windows/jj874388.aspx
Planning to Deploy Windows 8 Apps in Configuration Manager
http://technet.microsoft.com/library/jj822984.aspx
Sideload Apps with DISM
http://technet.microsoft.com/en-us/library/hh852635.aspx
Deploying a Windows Store App with Configuration Manager 2012 SP1
http://blogs.msdn.com/b/ukhe/archive/2013/04/08/deploying-a-windows-store-app-with-configuration-manager-2012-sp1.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

"Assign Access Control" returns error for essbase apps in shared services

Hello,
I installed and configured Oracle EPM 11.1.2 (Foundation, Essbase, Planning, Reporting&Analysis):
OS: Windows Server 2008 Sp2 (32bit)
Default Installation with default ports,
Installation of all components on the same server,
no clustering
EPM System Diagnostic says that everything is OK.
Now I want to assign filter access for an essbase database in the Shared Services.
Starting the menu item "Assign Access Control" in Shared Services returns the following error:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
+10.4.5 404 Not Found+
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
+....+
Can anybody help ???
best regards,
Nicole

Hello,
here's what I found out so far:
I get the error if I start the shared services console via the URL "http://servername:port/interop/index.jsp" and then select the "assign access control" for an essbase database.
If I start the shared services console via the workspace everything works fine.
Does anybody know what to do so that it also works if I start the shared services console via URL?
best regards,
Nicole

Unable to use the Assign Access Control feature in shared services

Hi,
When I try to right click on the essbase applicaiton in Shared Services to assign access control( to assign a new filter) I keep getting the following error
" Internet cannot display the webpage" message with the following
This problem can be caused by a variety of issues, including:
Internet connectivity has been lost.
The website is temporarily unavailable.
The Domain Name Server (DNS) is not reachable.
The Domain Name Server (DNS) does not have a listing for the website's domain.
There might be a typing error in the address.
If this is an HTTPS (secure) address, click Tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section
All the services are running file and I can create new users/ groups and also perform appication migration.
I'm using Hyperion 11.1.3.24 on windows 2003 r2.
Any help is appreciated. Thanks.
Regards

vs wrote:
John,
I tried the refresh button and nothing appears. I have created a group and gave it filter access. Now I'm trying to attach that filter to the group.
Appreciate your help.Can we replace backup .sec file for shared services?
For example: In planning if the .sec file corrupted then we replaced with old .sec file...rite...the same way can we do it in shared services?
I know if we replace the old sec in planning...it will take old securities only...
Edited by: Prabhas on Feb 12, 2013 9:27 PM

Assigned Access stopped working - no longer lets me select an App

I have two Surface machines configured for Assigned Access, they are supposed to go in to a Museum Exhibition soon. I updated my app today and so had to reconfigure the two Surfaces (take them out of AA mode to install the new app). When I set AA back up,
it worked fine on one machine, but on the other, the App list will no longer update. I can assign the user but I can't assign any apps to the user. The only other thing that changed today was some Windows updates came down. Could that have messed thigns up?
I have tried removing the user and starting over but the result is the same. This is frustrating, and makes me nervous as I have a deadline to get these devices into the museum.
Please help.

Hi,
Make sure that you have the app installed under the account on which you want to transfer to another, otherwise you may fail to add this app, just like the screen below:
Then, I suggest to perform a system restore to solve this:
http://www.microsoft.com/surface/en-us/support/warranty-service-and-recovery/refresh-or-reset-surface
Regards
Wade Liu
TechNet Community Support

Hi. I'm trying to set-up the wireless access times in my Airport Utility. I need to enter the "Description" and the "MAC Address" of each wireless client before I assign access times. What are these? Thanks.

Hi. I'm trying to set-up the wireless access times in my Airport Utility. I need to enter the "Description" and the "MAC Address" of each wireless client before I assign access times. What are these? Thanks.

Let's say that an iPhone is one of the wireless clients that you want to allow access to the network.
The Description of this device is anything that you want to specify for easy identification purposes. For example, the Description might be something like......
Rex's iPhone
The MAC Address, also known as a Wi-Fi Address is a unique indentifiction number that is assigned to every device. The number will always follow this form:
xx : xx : xx : xx : xx : xx, where "x" could be a number or letter.
To find the MAC Address or Wi-Fi Address of an iPhone or iPad.....
On the Home screen.....
Tap Settings
Tap General
Tap About
Wi-Fi Address is the item that you want
If you have a Mac computer......you can find the MAC Address or Wi-Fi Address as follows:
Open System Preferences (gear icon on the dock)
Open Network
Click on Wi-Fi on the left
Click Advanced at the lower right
The Wi-Fi Address for the Mac is located at the bottom of the window
Other wireless devices usually have the MAC Address or Wi-Fi Address on the label on the back or bottom of the device

Using Assigned Access on a Domain user account

We would like to use Assigned Access in Windows 8.1 Enterprise, but it appears to only allow locking down a local user account. Is there any way to lock down a Domain user account with Assigned Access?

No, it is designed for local user account. Regarding domain user, I think group policy is a better choice.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I can't open mail on Hotmail from Firefox. I can from Safari. I can open the Hotmail account page and it is complete w/ my new messages, but when I go to open them I get this messeage..."Please refresh your browser window. When you access your Windows Liv

I can't open mail on Hotmail from Firefox. I can from Safari. I can open the Hotmail account page and it is complete w/ my new messages, but when I go to open them I get this messeage..."Please refresh your browser window. When you access your Windows Live Hotmail account from more than one computer, we ask you to sign in again to help keep your account private and secure. " when I sign in again there is no change. in English
== URL of affected sites ==
http://http://sn135w.snt135.mail.live.com/default.aspx?n=2087215863
== User Agent ==
Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_5_8; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

"Clear the Cache": Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove the Cookies" from sites causing problems: Firefox > Preferences > Privacy > Cookies: "Show Cookies"
See http://kb.mozillazine.org/Clearing_the_cache and http://kb.mozillazine.org/Cookies

I am sharing my macbook pro over a network with windows 7, however through windows 7 I can access my whole computer instead of just the shared files!

I am sharing my macbook pro over a network with windows 7, however through windows 7 I can access my whole computer instead of just the shared files!

Hi Sig,
The issue is that i only want the shared folders to be accessed through windows 7.
Whats the point otherwise to have shared folders?
thanks..

How to restrict users working on Windows 7 clients from accessing Windows Explorer and other systems in the network through Group Policy with a domain controller running on Windows Server 2008 r2

Dear All,
We are having an infrastructure setup of around 500 client computers managed through group policy.
Recently the domain controllers have been migrated from Windows Server 2003 to Server 2008 R2.
Since this account requires extremely strict environment, we need to figure the solution for restricting the users from access anything locally.
It would be great if you can assist me with the following query.
How to restrict users logged on Windows 7 clients from accessing Windows Explorer and browsing other systems in the network through Group Policy with a domain controller running on Windows Server 2008 r2 ?
Can we disable Network Tab on the left hand pane ?
explorer.exe is blocked already, but users are able to enter the Windows Explorer by clicking on the name which is visible on the Start Menu.

>   * explorer.exe is blocked already, but users are able to enter the
>    Windows Explorer by clicking on the name which is visible on the
>    Start Menu.
You cannot block explorer.exe when you do not replace the shell - the
desktop you see effectively IS explorer.exe...
Your requirement sounds like you need a custom shell:
http://gpsearch.azurewebsites.net/#2812
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Guest OS Windows 7 for remote access

We are setting up 4 VM's with Windows 7 OS for staff access on a Dell PowerEdge R320.
We had all of the VM's working as specified above but had to re-install Server 2012 Standard because the factory tech setup the Raid 5 to only give the server OS 40 GB of space.
Installed Windows Server 2012 Standard with the following Roles and Features:
File and Storage Services
Hyper-V
Network Policy and Access Services - Network Policy Server - Health Registration Authority
Web Server (IIS) - Web Server (Defaults)
Management Tools (Default)
We will be joining this server to a Domain Controller on another server.
This server will need to have mapped drives to a third party software database and storage file installed in it for business management.
For setup purposes the NIC1 has been disabled to reserve it for iDRAC.
The NIC2 is set to a static IP address for RDP and DOES have internet access.
An External virtual switch has been installed in Hyper-V on the NIC2 named "Virtual Switch NIC 2" All of the guset VM's have the Virtual Switch "Virtual Switch NIC 2" installed (without VLAN ID and Bandwidth Management checked).
The guest OS does show the network adpater as a device and is also set to a static IP for RDP. The networking and sharing window shows "No Internet Access" and cannot repair or resolve the issue. The Guest OS also does not see the Host files shared
or the Host in Network. It displays as an unidentified network.
Please advise and thank you in advance for your assistance.

NIC 2 should not have anything on it except for Hyper-V Extensible Virtual Switch. Anything else and you do not have a virtual switch on that NIC. By default, when you create an External Virtual Switch, Hyper-V will automatically remove all the
other protocols and settings and enable the Hyper-V Extensible Virtual Switch. It looks like you went in and made manual changes which broke everything.
Delete your virtual switch and recreate it. When you recreate it, click the box to Allow management operating system to share this network adapter. Then configure your IP information on the vEthernet that is created, not NIC2. DO NOT MAKE ANY
CHANGES TO THE PROPERTIES OF NIC2.
"In the Hyper-V manager - Network Tab - it shows the IP address for the Guest OS as:
169.254.181.237"
I don't know what you are talking about here. Hyper-V Manager does not have a 'Network Tab'. Hyper-V does not perform any networking functions for the VMs. You need to configure the network within the VMs themselves. If you do not
have DHCP configured for your environment (not a Hyper-V function), your VMs will come up with a 169.254.0.0/16 address. That's an APIPA address and is a standard.
One last thing, you might want to read this blog in order to better understand how networking works within Hyper-V -
How
does basic networking work in Hyper-V? It's written for 2008, but it's a primer and it is still valid for 2012.
. : | : . : | : . tim

Can't put IE Metro into full kiosk mode Win 8.1 Enterprise or set IE desktop as default in Assigned Access

I have searched everywhere for this answer. Kiosk mode/assigned access is excellent. But it appears that you can only use IE Modern (Metro) for assigned access and the problem with that is I have found no way to completely lock down IE Modern.
I can only partially lock it down but users can still get to the address bar and settings very easily.
I either need some advice on setting IE to complete lockdown or how to set IE desktop for Assigned Access.

I am afraid there is no such feature in metro IE. Maybe you could submit a feedback to
IE connect
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Assign Access Control HTTP 404

The assign access control throws the http 404 error when i try to provision from shared services. It however works from workspace. Is this a known issue on 11.1.2.2? If there are any ways to make it work, Please post.

ak123 wrote:
Its the same when I try from both port 28080 and 9000.So are you running the embedded http server on port 9000? if not and you are using OHS then try accessing Shared Services through that port e.g. http://<sharedservices>:19000/interop/index.jsp
Actually I am not sure that matters with HFM and you can go direct through 28080 or 19000, worth a try, if not maybe it just needs registering again as Pablo said.
Cheers
John
http://john-goodwin.blogspot.com/

Bypassing Autologon in Windows 8.1 assigned access

Similar Messages

Maybe you are looking for