Bypassing Grand Central Press 1 prompt with PAP2-NA

I am using PAP2-NA (Firmware Version: 3.1.9(LSc)) with the Gizmo Project and Grand Central. I am trying to bypass the Grand Central press "1" prompt on incoming calls. With Sunrocket Gizmo, the following is apparently the way to do this. What is the equivalent way of doing this with PAP2-NA? I see only 2 DTMF related options in PAP2-NA administration.
---DTMF Tx Method (InBand/AVT/INFO/Auto)
---Hook Flash Tx Method (None/AVT/INFO)
I've tried all combinations of the above options but am still prompted.
Approach with Sunrocket Gizmo from http://www.kalyansuman.com/2007/08/free-voip-with-gizmo-project-grand.html
4) Change Gizmo settings using Telnet (to avoid press 1, 2 , 3 and 4 instructions on phone)
Telnet into your Gizmo - Go to Command Prompt and type Telnet.
At Telnet prompt - type 'open 192.168.251.1"
This will prompt you for username and password - give 'admin' for user name and passowrd that you set in step 3.
1) Press C2 and make sure RFC2833 (SDP and 2833 packets) is ALWAYS OFF
2) Press Cs
3) Look for Use SIP INFO for DTMF = Yes
4) If it says no, then press c to change settings.
4.1) Look for 18. SIP INFO for DTMF
4.2) Press 18 to set it to yes
4.3) Press y at the following prompt Use SIP INFO for transmitting DTMF digits?[y/n]
4.4) Press w to write setting to Flash
You should be now accepting inbound calls without needing to press 1, 2 and 3.

Bump..I have the same problems (even worse) with my PAP2T-NA and GizmoProject/Grand Central. When I Click2Call (on GrandCentral) to my phone and some 1800 numbers, DTMF tones didn't work (such as Bank's menu) unless I used "DTMF Tx Method:InBand", and that solved the problem- but it created a new one. DTMF didn't work on Grand Central's menu (press 1 to accept, 2 to reject, and so on). So when somebody called me via GrandCentral, I couldn't answer the phone. I haven't found any solutions yet. I can't believe that I'm the only one who's having this issue. If SunRocket Gizmo is fixable with that, I think it should be addressable in PAP2T. Any suggestions? My current PAP2T-NA Firmware Version is 5.1.6(LS) (just updated). How should I fix it with these options? I need to get both of functions working. (To bypass the grandcentral "press 1" would be the ultimate goal only if the DMTF is working correctly.) DTMF Process INFO:Yes/No DTMF Process AVT:Yes/No DTMF Tx Method:InBand/AVT/INFO/AUTO DTMF Tx Mode:Normal/Strict Hook Flash Tx Method:None/AVT/INFO Thanks! Message Edited by neokao on 02-10-2008 10:13 PM
Message Edited by neokao on 02-10-2008 10:14 PM

Similar Messages

I am using a PC and when I try to download an ebook, I get a pop up prompt with the message `Error! Check Activation` - how to resolve this so I can download and view the ebook, thank you

I am using a PC and when I try to download an ebook, I get a pop up prompt with the message `Error! Check Activation` - how to resolve this so I can download and view the ebook, thank you

Hi Ablondel24,
I understand that you are getting a 404 message when you access a website from a Mac, not a PC.
First check the cache for the site:
Reload the webpage while bypassing the cache using '''one''' of the following steps:
*Hold down the ''Shift'' key and click the ''Reload'' button with a left click.
OR
*Press ''Command'' + ''Shift'' + ''R'' (Mac)
Second try to [[Delete cookies to remove the information websites have stored on your computer]]
Let us know if this solves the issues you are having.

HT201210 What do I do when i'm prompted with "There was a problem downloading the software for the iPhone "....". You do not have enough access privileges for this operation.

I'm trying to sync my iPhone 4s to my Mac iTunes. My whole libary: music, movies, etc is only 26 gb but when I press the sync button I am prompted that I do not have enough space I need an extre 22 gb. So I thought if I were to restore it, it would help, but yet I am prompted with this message. I am just running into one wall after another and I need some help.

iOS: Resolving update and restore alert messages
For error -50: See error 13 and 14:
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.

Hi! My phone speaker is not working, so I cant hear people when they call me. I bought my iphone 4s on February 2013 at the Grand Central Apple Store. I would like to know if I can take it to an Apple Store in Spain so they can fix it or change it. Thanks

Hi! My phone speaker is not working, so I cant hear people when they call me. I bought my iphone 4s con February 2013 in the Grand Central (NYC - USA) Apple Store. I would like to know if I can take it to an Apple Store in Spain so they can fix it or change it. Or I need to find a way to take it to the US, where I bought it.
Thanks!!!

You will need to return the phone to the US. iPhone warranty is only good in the country of purchase, with the exception of the EU.

Every Save prompts with Save As

Issue: A client of mine has accidentally updated their Adobe Reader from 9.5 to 10.1.3 incrementally. After they have done this, every time they open a PDF and make changes (it has fillable fields) then presses save, it always prompts with "Save As" instead of just saving the PDF as it used to. This even happens with PDFs without fillable fields.
OS: Windows XP SP3
What I've tried so far: I have completely uninstalled Adobe Reader and reinstalled Adobe Reader 9.5 after a restart. The same issue persists.
Any suggestions?
Thanks!

Disabling protection mode resolved this. I didn't even think to check there. Thanks!

After hibernation, when trying to login to MacBook Air, it does not accept my password. I have to shut off and then get prompted with the following: Mac OS X wants to use the "login" keychain. I put in the password there and it works. any suggestions?

after hibernation, when trying to login to MacBook Air, it does not accept my password. I have to shut off and then get prompted with the following: Mac OS X wants to use the "login" keychain. I put in the password there and it works. any suggestions?

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

Create prompt with date-filter and initialize it with current date

Oracle BI 11 g
Hi!
I need to create dashboard prompt with date-filter and initialize it with current date. How can I do that?
I tried to create repository initialization block and add variable. But I don't know what should I write to DataSource? I tried to use functions Now(), Current_Date, sysdate (for example, SELECT Now() FROM tbl_Calendar) but without results - when I pressed "Test..." button I got errors - something like "Now() is unknown function" or "Incorrect syntax near key word Current_Date".
After that I tied to use Presentation Variable in Prompt, but also without success ((
Please, help me.

I've created Repository Variable "CurrentDate", using SQL-query like this "select convert(varchar(10), getdate(), 104)" and now this variable is being initialized by value "07.04.2011". But I don't understand how to use this varible in DashboardPrompt! What item in list "Default selection" I should choose - "Variable Expression", "Server Variable" or something else? When I chose "Variable Expression" and write "CurrentDate" I got just string "CurrentDate" when preview Prompt. @{CurrentDate} gave me the same result.

Hi- Iphone 5 wont charge using power cable or USB...I am using a genuine apple charger/cable..this started after I was prompted with new update for IOS 7.

Hi- My Iphone 5 wont charge using power cable or USB...I am using a genuine apple charger/cable..this started after I was prompted with new update for IOS 7 yesterday. My phone is dead and wouldnt power up ..have tried resetting using itunes but i doesnt detect the phone and..pressing sleep/home button doesnt do anything

Update
I guess that it just had a bad connecting port on the phone itself, no clue why it wouldn't work when plugged in both ways other than there is actually some differentiating between the two sides.

Exchange 2013 SP1 users randomly prompted with "The Microsoft Exchange Administrator has made a change that requires you quit and restart Outlook"

I got a call to check an issue with a Exchange Server 2013 SP1 environment recently. All server was upgraded from Exchange server 2013 CU2 to Exchange Server 2013 SP1. It was done successfully but many users were being randomly prompted with a popup in their outlook
client with the following message:-
“The Microsoft Exchange Administrator has made a change that requires you quit and restart Outlook”
Although there wasn’t any changes of late in the environment there were random popups like these for multiple users. As the behaviour was not consistent and effecting the entire upgration population
Please suggest us how to resolve the issue.
Regards, Md Ehteshamuddin Khan All the opinions expressed here is mine. This posting is provided "AS IS" with no warranties or guarantees and confers no rights.

Hi,
Does the issue happen to all Outlook 2013 users? Please create a new Outlook profile to have a try.
If it fails, please check the msExchHomePublicMDB value in ADSI Edit:
1. In Adsiedit, expand Configuration-->CN=Services -> CN=Microsoft Exchange -> CN=domain -> CN=Administrative Groups -> CN=Exchange Administrative Group -> CN=Databases.
2. Right-click the listed database > Properties.
3. Check whether the msExchHomePublicMDB value is set to an available value. Please change the value to <not set>.
4. Click OK.
Then check whether the issue persists.
Thanks,
Winnie Liang
TechNet Community Support

SSL - Always Prompted with "Request Authentication"

Hi,
We have developed an Applet which works as an Download Manager and we had it signed as it needs to access the file system of the users. We have two deployment environments one over SSL (Entrust) and other Non-SSL. The signed applet works well over Non-SSL, but over SSL, it always keeps prompting with the "Request Authentication" screen.
The following are the details of our application and JRE does
not seem to recognize the certificate using which the Applet was signed.
<ul><li>     Webserver - IIS V6.0
</li>
<li>     Website SSL Certificate authority - Entrust
</li>
<li>     Code Signed using .pfx {Applet}
</li>
<li>     Browser used - IE/Firefox</li>
<li>JRE version - Latest
</li>
</ul>
Now when I access the application from a browser, whenever I
invoke the Applet, everytime I get "Request Authentication" pop-up window always.
"*Please select certificate to be used for authentication*" And
there is a list box below, which is always empty. This pop-up opens whenever there is an <applet> tag in the window and alos for button clicks within the applet.
However when I access the same
portal over non-SSL connection, everytime seems to work fine and a Prompt is
popped up to accept the certificate from <Issuing authority> and I dont
get a List box as I used to get before over SSL connection. Has it something to
do with the SSL connection? or should the Applet be signed differently to work
over SSL?
The command line code which i use for Signing is
*keytool -list -storetype
pkcs12 -keystore*
<certificatename.pfx>
*jarsigner -storetype
pkcs12 -keystore SLB SDC Software Code Signing Certificate.pfx -storepass
"*<Password>*" DownloadManager.jar "*3ba9.........2c8*"*

It was a problem with my IIS settings. It was always expecting Client certificate from browser. I had changed the follwoing setting Change on IIS for m webistes virtual directory and the problem on "Request Authentication" got resolved.
* Right Click virtual directory on IIS and select Properties.
* Directory Security (tab) --> Server Communications --> Edit
* Client certificates --> Ignore Client Certificates + Save
Regards,
Amrish

Today I get issues with thte device. When I in a phone call, the screen don't auto turn off. There is no a screen protector on there and it seems that the built-in proximity sensor is not responding. I have to press the screen with my face accidently.

today I get issues with my z10 device. When I in a phone call, the screen don’t auto turn off. There is no a screen protector on there and it seems that the built-in proximity sensor is not responding. I have to press the screen with my face accidently. can anyone help me with this?

Same issue already several weeks.
And we are not alone:
http://forums.crackberry.com/blackberry-z10-f254/proximity-sensors-still-not-working-my-z10-891783/i...
At all there is, I think, 4 threads in parallel about this issue at CB forums. One of the:
ms.crackberry.com/blackberry-z10-f254/proximity-sensors-still-not-working-my-z10-891783/index5.html
I already contacted BB Help at Twitter. Answer:
Thanks for the information. It seems that you have installed an OS version higher than the one supported by your carrier on your device. Please contact your carrier to get the supported OS version and try the proximity and light sensors. Let us know if you need further assistance. Cheers. ^LFC.
I did replay:
You are confused me. Phone got updates over network automatically. On crackberry forum a lot of people from different countries and with Different OS version, but with the same problem. Hi, this is thread at CrackBerry: http://forums.crackberry.com/blackberry-z10-f254/proximity-sensor-906493/index3.html
This my replay was 22 of march. No more answer from BB.
I can't contact my operator - 3UK, because I bought my from on Amazon from Amazon. This phone not from operator - seller is Amazon.
What I already done:
For last week, I read, how to install OS using Sachesi and Autoloader. I used Sachesi to load 3 UK version, I installed autoloader from this links:
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
This
For Z10 models STL100-1, 2, -3, -4: Download 10.2.1.1925
Doesn't help
And this:
For Z10 models STL100-2, -3, -4: Download the 10.2.0.1803 OS
No result.
After install all of them phone wants to update to 10.2.1.2102 by air.
BBVE in all versions sais: Can not obtain data from sensors.
Dear BB support, please, can you explain, how to resolve this issue?

HT1296 whenever I try to sync my phone with itunes, it prompt with a window saying that this computer is not authorised. Although I again authorise my computer through store option but again while sync it shows the same window. I am unable to sort it out

whenever I try to sync my phone with itunes, it prompt with a window saying that this computer is not authorised. Although I again authorise my computer through store option but again while sync it shows the same window. I have reinstaled itunes also but invain. I am unable to sort it out pl help

Hello dizzy bizzy,
Thank you for providing the details of the issue you are experiencing with purchases from the iTunes Store. I recommend following the steps in the following article:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/ts1389
Thank you for using Apple Support Communities.
Best,
Sheila M.

Non-central adapter engine setup with web dispatcher

Our PI setup is working perfectly in our private zone, now the requirement is to expose our PI to public zone to do our B2B transactions. We have proposed a solution but I need your expert suggestion on this. Solution proposed
Public Zone -|Semi public zone| Semi private zone |----Private zone
|>>>Application gateway >>>>>>>>| Non-Central Advanced<==========>|------ PI 7.1
|>>>(For Inbound message) >>>>>>| Engine (For both Inbound and<=====>|------(IS, central AAE, IE)
|<<<<< Proxy<<<<<<<<<<<<<<<<<<|Outbound message and<==========>|
|<<<<<For outbound)<<<<<<<<<<<<|Load balancing for B2B)<=========>|
Non-central AAE will be in semi private DMZ. It will send/receive all B2B messages from/to semi public DMZ via Application gateway for inbound messages and proxy for outbound messages.
Then Non-central AAE will work with the PI central instance running in Private DMZ to receive and send messages.
My Questions:
1) Do we need a SAP web dispatcher to work in between (Application gateway, Proxy) and (Non-central AAE)   ?
    My understanding: SAP web dispatcher balances the load which will enhance the performance but it is not mandatory. Non-central AAE can work independently with Application gateway and Proxy to receive and send messages.
2) What is the configuration we need at non-central AAE to exchange messages with the application gateway and proxy?
Thanks
Amaresh

what is use of non central Adapter engine in Java server proxy?
The collaboration profile agreement service (CPA service) does not read the CPA cache from the Integration Directory.
You define the user that is to send the messages to the Integration Server in a service parameter. When the Integration Server receives the message with this user, it checks the user using the access control list. This check is not performed for the technical user XIAFUSER.
pls refer below link:
http://help.sap.com/saphelp_nw73/helpdata/en/48/d7fb415ba90783e10000000a42189d/frameset.htm

How to create two prompts with same named object?

Hi to All,
I am a new user of OBIEE. Actually have only one column called creation date in my report. My requirement is in dashboard, I need to display two text boxes in same prompt with the name Beginning creation date and Ending Creation Date. Actually, I was able to do it with the operator "Between" but when i am doing it, I was not able to determine how can we get the values entered by the user for beginning date and ending date because both dates will get stored in the same prompt only (ie) in my "Creation date" prompt.
Also, I have an another question, In a single prompt I need to repeat the same object more than once. But When I tried it shows the error "same column exists.. so this action will be ignored". Please help.
Thanks in Advance,
Thenmozhi

Thenmozhi,
You can think about having 2 different prompts: the first one with the operator >= and the second <=.
For your second question you cannot have the same column in the same prompt more then once
Regards
Adil
PS:Please assign points and close the thread when your question is answered

Central Sales Tax Amount with respect to Purchase Orders

Is there any way to get Central Sales Tax amount with respect to Purchase Order Numbers. I need this for report.
Pls get me table numbers from which i can extract

Hi,
Refer report J1I2 - Sales Tax Register
Here in the selection screen, enter Tax code, CST Condition type, etc...
Also refer report S_ALR_87012357 - Advance Return for Tax on Sales/Purchases

Bypassing Grand Central Press 1 prompt with PAP2-NA

Similar Messages

Maybe you are looking for