Bypassing proxy settings does not work
I can't manage to get my Mac to bypass the proxy settings. My bypass settings are:
*.local, 169.254.0.0/16, localhost, 193.230/16, 192.168.0.0/24, 172.16.6.0/24
With these settings if I try to access 172.16.6.120, the server does not respond.
However if my settings look like this:
*.local, 169.254.0.0/16, localhost, 193.230/16, 192.168.0.0/24, 172.16.6.0/24, 192.168.0.252, 172.16.6.120, 172.16.6.130
I can access that IP address with no problems.
I also tried: *.local, 169.254.0.0/16, localhost, 193.230.0.0/16, 192.168.0.0/24, 172.16.6.0/24 and *.local, 169.254.0.0/16, localhost, 193.230/16, 192.168.0.0/24, 172.16.6.* with no success.
Can you please help?
Please update to the current Firefox 22.0 release.
*Help > About Firefox
*https://support.mozilla.org/kb/update-firefox-latest-version.
*https://support.mozilla.org/kb/Updating+Firefox
The Firefox 21 version that you currently run is no longer supported with security updates.
*It is important to update Firefox and add-ons to the latest version to get all security fixes.
*FoxyProxy Standard: https://addons.mozilla.org/firefox/addon/foxyproxy-standard/
Similar Messages
-
Removing firefox proxy settings does not work until a restart?
When I transfer from my work network (with a proxy server) to my home network (no server), I have to restart the browser before it realizes that there is no proxy server that it has to authenticate with. Until I do this, (re)loading pages gives me an error.
However, when going the other way, it smoothly recognises that there is a server, and no restart is required to continue browsing
I have automatic proxy settings enabled. I have tried selecting 'no proxy server', but I still need to restart firefox for this to work.Please update to the current Firefox 22.0 release.
*Help > About Firefox
*https://support.mozilla.org/kb/update-firefox-latest-version.
*https://support.mozilla.org/kb/Updating+Firefox
The Firefox 21 version that you currently run is no longer supported with security updates.
*It is important to update Firefox and add-ons to the latest version to get all security fixes.
*FoxyProxy Standard: https://addons.mozilla.org/firefox/addon/foxyproxy-standard/ -
Top/Left Back Button in Settings does not work
When opening the Settings, it will present "navigate up" enabled. That is the wedge on the top/left next to the Firefox Icon in the Action Bar. ("actionBar.setDisplayHomeAsUpEnabled(true)")
However, it does not work. Please implement the back-behavior as shown here:
http://developer.android.com/guide/topics/ui/actionbar.html#HomeHi,
Thanks for reporting this, I have filed https://bugzilla.mozilla.org/show_bug.cgi?id=756663 for the issue and alerted UX and eng about the problem.
Regards,
Michelle -
JRE System-level settings does not work - JRE1.6.30
Good day,
I need to set deployment.security.mixcode parameter to "DISABLE" within of deployment.properties configuration file.
Also I wish to place the deployment.properties configuration file is not user-specific path. The default location is
<User Application Data Folder>\Sun\Java\Deployment\deployment.properties.
TO change the default location I read about possibility to use the deployment.config for specifying the System-Level
deployment.properties in the infrastructure.
Unfortunatelly seems does not work. Someone have got experience about system level settings of deployment.properties?
This is the configuration I have used.
deployment.config:
deployment.system.config.mandatory=FALSE
deployment.system.config=file/:C:\Program Files\Java\jre6\lib\deployment.properties
deployment.properties:
#deployment.properties
#Fri Feb 17 15:54:57 CET 2012
deployment.version=6.0
deployment.capture.mime.types=true
deployment.browser.path=C\:\\Program Files\\Internet Explorer\\iexplore.exe
#Java Deployment jre's
#Fri Feb 17 15:54:57 CET 2012
deployment.javaws.jre.0.product=1.6.0_31
deployment.javaws.jre.0.registered=true
deployment.javaws.jre.0.osname=Windows
deployment.javaws.jre.0.platform=1.6
deployment.javaws.jre.0.path=C\:\\Program Files\\Java\\jre6\\bin\\javaw.exe
deployment.javaws.jre.0.location=http\://java.sun.com/products/autodl/j2se
deployment.javaws.jre.0.enabled=true
deployment.javaws.jre.0.osarch=x86
deployment.security.mixcode=DISABLE <<====
Thank you in advance
Adriano C.
Edited by: user12025469 on Feb 20, 2012 6:23 AM
Edited by: user12025469 on Feb 20, 2012 7:48 AMuser12025469 wrote:
This is the configuration I have used.
deployment.config:
deployment.system.config.mandatory=FALSE
deployment.system.config=file/:C:\Program Files\Java\jre6\lib\deployment.propertiesHm, try using a file URL like this:
file\:C:/Program Files/Java/jre6/lib/deployment.propertiesI believe that the file is interpreted as a properties file, which means the colon and slashes need to be escaped. This would be it if you want to use a proper Windows path:
file\:C:\\Program Files\\Java\\jre6\\lib\\deployment.properties -
Proxy Settings still not working with new 3.1
The new 3.1 of Safari for Windows still does not work properly with proxies (PAC files) with regards to using current logged on User Credentials when a Proxy requires authentication. Anyone have similar issues?
3.18.8 @ 3:58PM NOPE NOT FIXED...
MY browser is still crashing when trying to go to secure websites behind a corporate firewall (specific ISA 2006)
The problem is with the way Sfari Handles Secure website request
Firefox works because it uses its own module.
----"First of all I'm running Safari on my Leopard
This computer is on a corporate network behind ISA Server 2006
I'm able to Authenticate to go to the internet but when I try to go to a secure website (example https://www.bankofamerica.com )My browser Crashes.
I was expecting the new release of Safari to fix this but I'm still having the same issue.
Looks like the problem is the way this browser handles secure connection requests from behind a corporate firewall.
Any one has a clue how to fix this?
I havent been able to find any acceptable fixes for this problem (with exception of running a proxy server on this computer such as squid)
Thanks .. -
My Time Capsule has stopped working. Restoring default settings does not work.
I have a 2TB Time Capsule (Model No. A1409). I think that it is approximately 20 months old. It has been working very well until around two months ago, when it began to display the flashing amber light. At that time I performed a hard reset, restoring the default settings. This worked and the capsule continued backing up perfectly for a further three weeks. However, about three weeks back the flashing amber light returned. As I have been busy elsewhere I was not able to attend to this untl recently. It does not seem to matter how many times I reset the device, I cannot return it to a working state.
The capsule has previously been set up to connect to the internet through my existing broadband service. As such, it was initially set up and subsequently restored wirelessly. I no longer seem to be able to achieve this. Has anybody else experienced similar difficulties and if so, were you able to remedy it.
Grateful for any advice. I feel another trip to the Genius Bar coming on.Yeah absolutely - no problem.
I had the same thing happen where I did a restore on my personal TimeCapsule (TC),
and when I updated the device after installing it, it for some reason set the TC into bridged mode shutting off DHCP/NAT service.
Which means, that it doesn't reserve an IP for any client trying to attach. This is what it sounds like yours is doing.
So if you see that it says bridged, and that box with dhcp reservation is greyed out, change it from bridged to DHCP/NAT.
This will allow any client (computer/device) to attach and reserve an IP address for access to the internet.
Once that is set, and you update, hopefully the light should go green.
I would also recommend checking the "internet" tab, and making sure that your IP address is assigned using DHCP. (It probably is - but that part is essential for communication with your Internet Service Provider (ISP)...
SO - if the device goes green after the update:
If it does, then go back into the router and click on the wireless tab and confirm your wireless settings are correct, if any changes are made, update.
At that point, you should be able unplug your laptop to wirelessly connect to the router. -
Restore original settings does not work on my new iphone
conected the phone to my pc-downloaded new software-new software had a problem loading-tried to restore the original settings and failed-restarted the pc-used a different usb port- getting very frustrated-need some help
I tried the restore as a new phone still no sucsess!
Front facing camera works after restore until you try and use the camera and then can not get the screen icon up to switch camera.
The camera was purchased from the Apple store in London but a month ago as it was a present. -
I recently updated Lightroom to 5.4 and noticed that when the file comes back from CS6, the edit/sycn settings does not work. Selecting the gray area of the source file, and selecting another, clicking on the sync produces nothing. When I select a source image and another that has not visited CS 6 the sync works fine. I have used this simple technique for years with previous versions and never had a problem. Something has changed with the update and/or compatibility with the file coming back into Lighroom. Any thoughts about this would be appreciated.
ssprengel, thanks for following up. I work with DNG files in Lightroom that have been converted from Raw CR2 files. They are exported from Lightroom to Photoshop as Tiff files and any files that i edited and traveled round trip could not be used to sync other files in Lightroom. Even simple edits like saturation or exposure have disabled the file from being able to sync the settings to other files. I do most of the syncing of develop settings in Lightroom, but occasionallly I will adjust basic settings in Photoshop for one reason or another and after updating to 5.4 I noticed that sync worked fine within Lightroom only. I have tried a few changes to preferences with regard to how develop settings are registered with the file and that hasn't made any difference. Any ideas?
-
Exception List in Proxy settings sucks - *.* does not work
If I want to add a proxy settings '''only '''for local addresses I can not do this. In IE I only have to add "*.*" in the exceptions list, but in FireFox the symbol "*" does not work in this way. Is there another way to do that without typing every top domain in the exception list?
Hi,
You can try the [https://addons.mozilla.org/en-US/firefox/addon/foxyproxy-standard/?src=ss FoxyProxy] extension. Please go through the reviews, FAQs, help and ratings before installing. There may also be similar extensions. -
Applet does not work with a proxy server.URgent
Hi,
I have an asp page being hosted from a IIS server.
The asp page has an applet which gets data from a server side component which is hosted as a service on the server side.For connection to the server I am using URLConnection object and trying to connect over a TCP connection.
The problem occurs when I use an proxy in the middle.
I have changed the browser settings to include the proxy.
The following is the error I recieve:
Full :http://172.25.11.63:4590/
<-------------------------------->
OPening input stream
in Run ::::
ERROR: Created data socket but can't open stream on
it.172.25.11.63:4590//
172.25.11.63:4590//
java.io.FileNotFoundException: 172.25.11.63:4590//
at com/ms/net/wininet/http/HttpInputStream.connect
at com/ms/net/wininet/http/HttpInputStream.<init>
at com/ms/net/wininet/http/HttpURLConnection.createInputStream
at com/ms/net/wininet/WininetURLConnection.getInputStream
at TalkClientApplet.rendezvous
at TalkClientApplet.actionPerformed1
at TalkClientApplet.start
at com/ms/applet/AppletPanel.securedCall0
at com/ms/applet/AppletPanel.securedCall
at com/ms/applet/AppletPanel.processSentEvent
at com/ms/applet/AppletPanel.run
at java/lang/Thread.run
...Disconnecting.
Following is my code.
url = new URL("http://" + host +":"+i);
urlconnection = url.openConnection();
urlconnection.setDoOutput(true);
urlconnection.setDoInput(true);
System.out.println("Successfully opened the URL connection at " + "http://" + host + ":" + i );
System.out.println ("Protocol: " + url.getProtocol());
System.out.println ("Host :" + url.getHost());
System.out.println ("Port :" + url.getPort());
System.out.println ("File :" + url.getFile() );
System.out.println ("Full :" + url.toExternalForm());
System.out.println ("<-------------------------------->");
os = new BufferedWriter(new OutputStreamWriter(urlconnection.getOutputStream()));
System.out.println("OPening input stream ");
// is = new DataInputStream(urlconnection.getInputStream());
System.out.println(urlconnection.getInputStream());
is = new DataInputStream(urlconnection.getInputStream());
The exact place where I get the error is whn i call URLConnection.openInputStream().
Usually this error comes with a malformed URL.But the same code words without a proxy.Also I am not making any changes to my code in both scenarios that is with or without proxy.
Please help.This is urgent and a showstopperThanks for your nice solution, but unfortunatelly it does not work with lines longer than 100 chars with Netscape. It works fine with IE and appletviewer too.
Example:
I use this code:
try {
URL url = new URL(protocol,hostName,portNumber,URLstring);
InputStream in = url.openStream();
BufferedInputStream bis = new BufferedInputStream(in);
StringBuffer input = new StringBuffer(60);
int c;
while ((c = bis.read()) != -1){
System.out.print((char)c);
input.append((char)c);
bis.close();
dataFromServer = input.toString();
catch(Exception ex) {
ex.printStackTrace();
}I use input file test.html with exactly 100 chars ('a')
Netscape Java Console:
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaadataFromServer : aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaI use input file test.html with exactly 101 chars ('a')
Netscape Java Console:
?JL?yyxk?cedataFromServer : ? -
I have tried to instal Firefox on my PC but the first page that opens just says :
The Proxy Server is Refusing Connections.
Firefox is configured to use a proxy server that is refusing connections.
- Check the proxy settings to make sure that they are correct
- Contact your network administratorto make sure the proxy server is working
Try Again ( button ) does not work.
I have uninstalled Firefox and reinstalled it twice more but it gives me this page every time I try to run it.
I have a screenshot of this page but I can't see how to send it to you.
I don't know how to check the proxy settings. Can you please help ?
Thank you.In Firefox 3.6.4 and later the default connection settings have been changed to "Use the system proxy settings".
You can find the connection settings in Tools > Options > Advanced : Network : Connection
If you do not need to use a proxy to connect to internet then select "No Proxy"
See "Firefox connection settings":
*[[Firefox cannot load websites but other programs can]] -
iphone 4: Home Button Not Working. The home button only works when it is connected to iTunes, once i disconnet it does not work, i have tried a restore to factory settings but it still is not working. Any suggestions?
Apple, as I said, does not repair your iPhone. All hardware service issues are handled by replacing the unit. So they can't handle the home-button issue without also addressing the issue of the cracked screen, for which they'll almost certainly charge you. But you can make an appointment at an Apple Store or call Apple tech support and plead your case.
Regards. -
Settings function does not work in my lumia 520
I have lumia 520. when i update Lumia Black in my Setting some of the settings apps does not work. when i click this its return back the settings. i can't update it . how can i update or reinstall it.
Or How can i re-update window for work properly my system.
Please Help me .....I had the same problem with a feature. It showed share instead of update and I knew there was an update out there.
I turned my phone all the way off, let it sit for a minute of so and turned it back on. The update then showed up with the updater. -
I am trying to restore a phone that the screen does not work on, therefore I can't input my password. How can I bypass this and upload it to itunes?
You could follow the instructions in the support document that you linked from. There is a section regarding the passcode and the inability to use it or enter it. However, you may encounter more issues since you cannot use the screen.
-
Hello,
I have an iPhone 4 and recently started to have some problems. First, the button on the side of my phone, that puts the phone on silent is not working. I can move the switch, but my phone stays in silent. However, If I plug my headphones in, Then I can hear everything like I am supposed too. Also, my up volume button does not work. This is with the headphones also.
I have tried doing a soft reset, I reset all of my settings, I updated my software, I restored everything back to factory settings, and nothing has fixed it. I bought it from best buy and can send it in for service, but the last time I sent a phone in, it took them 3 months! and I really don't want to go without my phone that long.
Does anybody have any suggestions?
Thanks so much!!Sounds like it either believes that there are headphones plugged in, or the switch is broken.
Why in the world would you take it to Best Buy for service? Take it to an Apple Store. They can replace it on the spot if it's defective.
Maybe you are looking for
-
ITunes doesn't recognize the device anymore.
My iPad 1 worked perfectly until today when I tried to update to iOS5 and now neither iTunes nor iPad do react when I plug them. The Battery Charging icon also doesn't appear... Anyonen an Idea?
-
How to use global parameters in Opertional Mapping??
Hi, I have to create 4 mappings. 1. File to PI(Graphical): To extract Payload form incoming hedaer,payload & trailer & few validation which gives an ERROR variable. 2. XSLT: payload to IDOC stucture data type. 3. To IDoc(Graphical): final mapping to
-
Why is word not receiving the full document from reader?
When I convert a PDF document to a word document, some of the document is coming across correctly. How do I fix this?
-
1130 AP keeps rebooting cannot find WLC
Device WLC 2000( with the new IOS AIR-WLC2006-K9-4-0-206-0.aes) and AP 1130. First time when i power on AP1130, WLC is able to detect it and wireless is working fine WLC will automatically upgrade the IOS of 1130AP to c1130-k9w7-tar.123-11.JA1.tar bu
-
How many numbers of GRE Tunnels are supported on Cisco 3925 router?
Hi... I would like to know that....... How many numbers of GRE Tunnels are supported on Cisco 3925 router? Thanks....