Bypassing selection screen in custom reports added to MSS reporting

I have created a custom report (using PNP) in R/3 and added it to the MSS reporting (not Launchpad). Even though the manager is selecting his subordinate employee and clicks report result, he still sees a selection screen which i have defined in the custom report.
When the manager runs a sap standard report RPTABS50, he sees data of the employee only he selects.
How do i bypass the selection screen in the custom ABAP report i have added to the MSS?
Thanks.

Has to take an alternate approach. Picked a standard report by SAP and modified to our requirements.

Similar Messages

Difficulty in adding new parameter in selection screen of GR55 report

Hi Gurus,
I have a requirement to add an extra field in Cost center:Act/Plan/Comm CC Cur report.This is otherwise a Z report in report painter with 0% code (T-code : GR55-> Report group->Report).But,when we go to technical information of this report,it has four standard sap programs,which contains code for this selection screen.It does not even have a modification scope.
Selection screen of this report contains following parameters:
Selection values:
Controlling Ar
Fiscal Year
From Period
To Period
Plan Version
Selection Groups:
Cost Center Group
Or value(s)
Cost Element Group
Or value(s)
My requirement is to add one more parameter : Purchase oeder in new block:
Is there any way to achieve it.
Note: Copying the standard progs into custom prog is not working,i already tried that.
Please let me know your suggestions,if any one of you came across such requirement before.it is very impoertant for me.
Thanks in advance,
Meenakshi

Hi meenakshi239,
you can always use implicit enhancement spots.
Regards,
Clemens

Dynamic selection screen for custom ABAP report

Hi,
His it possible to create a custom ABAP report with a dynamic selection screen. The report doesnot use a logical database. If possible sample code will be appreciated.
Regards,
Chandra Kumar

hi
use this link
Dynamic selection screen
Cheers
Snehi

Functional area(FKBER field in the selection screen of the report painter))

Hi,
I have a requirement to add functional area field in the selection screen for a report painter report. This report using library 1VK and table 'CCSS'. I added functional area field in the general data selection . After the execution of report with functional area field filled with value. report not giving any output. do i need to maintain any setting to achieve?
Regards,
Palani

1. Call GR22 and click "Characteristics".
2. Check FKBER and assign a position number to it.
3. Save and close the library.
4. Call your report in GRR2 and you should now see FKBER as an available characteristic.
5. Use it in the General Data Selection or as a Lead Column, as per requirement.
Or,
1. Call GR21 and create a custom library. Provide a name and description and also provide a library you can copy from (scan for the best-fit library).
2. Now follow the steps 2 through 5 above to achieve your result.
Hope this helps.
Cheers.

How to display the sort value in the selection screen in the report title

Dear All,
How to display the sort value in the selection screen in the report title? I have selected a value in the selection screen for sorting , but i need that values by which i have sorted with in the report title. Can you please throw some light on this!!
Good day,
Thanks and regards
Arun S

Hi Arun,
Try this.
1, Set one dynamic parameter,
2, Drag and drop that parameter into your report title.
3, Pass the value(sort value) dynamically from your application,
4, Cheers..
Other wise Try with Dataset, create a dataset and fill thev alue into that.. Then set the data source from CR designer. and darg and drop that data column into the report.
Hope this will work,
Regards,
Salah
Edited by: salahudheen muhammed on Mar 25, 2009 11:13 AM

Passing values to a dynamic selection screen via a report

Hi,
I have the following problem and need to seek your expertise urgently.
In my program, I need to call another report by passing in parameters to the selection screen of other report. However, I could not pass values into a dynamic selection screen. I tried to use submit (report) with free selection but do not know how it works.
Currently, I tried calling the function RS_REFRESH_FROM_DYNAMICAL_SEL and FREE_SELECTIONS_RANGE_2_EX. Using the object the first function has returned to me, I tried to append values such as fieldname etc to it. However, I realised the field names of a dynamic selection screen keeps changing. So I would not know how to pass a particular value to a selection field.
Appreciate any help given.
Thanks,
CK

Hello CK,
Are you using logical database in your selection screen program attributes? If it is, look at include file DBxxxSEL for parameter named xxxDYNSE where xxx = logical database. Debug the program that has that dynamic selection, and look at field xxxDYNSE. This should give you a hint on how to populate the parameter when you submit the program.

Selection Screen for crystal report ?

Hi to all,
Is it possible to create selection screen using Crystal report designer alone ?
I came to know that we can give selection parameteres using SELECT EXPERT option in desginer.
Can we create selection screen for user input like we have in abab (selection screen) ?.
Is it possible to check authorization using Crystal report designer ?
If anyone knows anything .... remotely connected with the question I asked please reply.
Waiting for reply.
Regards,
Surya.

Surya,
To do what you are wanting, you will want to do the following:
1) Create parameters. Open the Field Explorer > right click Parameter Fields > fill in the necessary fields o create the desired parameter.
2) Add the parameter to the Select Expert.
2a) If you are using a SQL Command to generate your data set you will need to add the parameter name to the Parameter List of the Command and add it the selection criteria of the SQL statement.
Something like this:
WHERE f.FieldName = {?ParameterName}
HTH,
Jason

Getting two selection screen in one report

Hello Friends,
I am Making report, In my report on first screen i have given two pushbutton, like this :
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-001.
PARAMETERS : p1_but RADIOBUTTON GROUP g1,
p2_but RADIOBUTTON GROUP g1.
SELECTION-SCREEN END OF BLOCK b2.
now i want when user click on any one pushbutton it shows another selection screen, whose select options are:
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-000.
SELECT-OPTIONS: so_erdat FOR lf_date,
so_vbeln FOR lf_vbeln MATCHCODE OBJECT zvbeln..
SELECTION-SCREEN END OF BLOCK b1.
Please guide me can i use two selection screen in one report?, If yes then how can I use? Please revert back me as soon as possible.........

Hi,
you can achieve it only by using two USER_DEFINE_SELECTION SCREEN.
For detail check the link
http://help.sap.com/saphelp_nw04/helpdata/EN/9f/dba83d35c111d1829f0000e829fbfe/content.htm
Regards,
anirban

How to force selection screen in WAD Report

Hi Gurus,
How do we force a variable selection screen in WAD Report. We are in SP 10.
Thanks
Syed

Hi Karthik,
Iam not sure for some reason, when I select web_template and click on Web Parameters, there nothing available below Behaviour section. However when I create a new Analysis Item and see its properties, the Behaviour section shows only Allow Navigation & Only Hierarchy options.
Should I reinstall my front end. We are in SP10.
Appreciate your response.

2 selection screen in one report.

hi,
i need to have 2 selection screen in one report....based on the input of 1st selection screen i need to display another selection screen. The 1st selection screen consist of three radio buttons....selecting one of them should allow me to further input data....
i tried user command, modif id...but the problem is the 2nd selection screen is also displayed initially and den after clickin d radio button i get only the 2nd selection screen...
i cannot use module pool programming coz of user requirement.
could anybody help with the code??

Hi
Please this code ..
SELECTION-SCREEN: BEGIN OF BLOCK c1 WITH FRAME TITLE text-001.
Upload table
PARAMETER: p_upload TYPE char01 RADIOBUTTON GROUP rsel
                    DEFAULT 'X' USER-COMMAND ucomm,
Edit Tables
           p_edt_tb TYPE char01 RADIOBUTTON GROUP rsel.
SELECTION-SCREEN: END OF BLOCK c1.
Upload table
SELECTION-SCREEN: BEGIN OF BLOCK c2 WITH FRAME TITLE text-002.
PARAMETERS: p_tab   TYPE char16     MODIF ID m1,
            p_comp TYPE char18     MODIF ID m1,
            p_plant TYPE werks_d    MODIF ID m1,
            p_excel TYPE localfile MODIF ID m1.
SELECTION-SCREEN: END OF BLOCK c2.
Edit Table
SELECTION-SCREEN: BEGIN OF BLOCK c3 WITH FRAME TITLE text-003.
Replace component
PARAMETER: p_rp_cmp TYPE char01 RADIOBUTTON GROUP edtb
                      DEFAULT 'X' USER-COMMAND ucomm MODIF ID m2,
Edit Lines
           p_edt_ln TYPE char01 RADIOBUTTON GROUP edtb MODIF ID m2.
SELECTION-SCREEN: END OF BLOCK c3.
SELECTION-SCREEN: BEGIN OF BLOCK c4 WITH FRAME TITLE text-004.
Replace component
PARAMETERS: p_tab_r   TYPE char16 MODIF ID m3,   "Assembly Table Name
            p_comp_r TYPE char18 MODIF ID m3.   "Upload Table Name
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(31) FOR FIELD p_fcomp MODIF ID m3.
PARAMETER: p_fcomp TYPE zpart MODIF ID m3.
SELECTION-SCREEN COMMENT 62(20) FOR FIELD p_tcomp MODIF ID m3.
PARAMETER p_tcomp TYPE zpart MODIF ID m3.
SELECTION-SCREEN END OF LINE.
Edit Lines
PARAMETERS: p_fexcel TYPE localfile MODIF ID m4,
            p_texcel TYPE localfile MODIF ID m4.
SELECTION-SCREEN: END OF BLOCK c4.
SELECTION-SCREEN: BEGIN OF BLOCK c5 WITH FRAME TITLE text-005.
validate data
PARAMETERS: p_valid AS CHECKBOX DEFAULT space
                    USER-COMMAND ucomm MODIF ID m5,
Background Processing
            p_back AS CHECKBOX DEFAULT space
                    USER-COMMAND ucomm.
SELECTION-SCREEN: END OF BLOCK c5.
AT SELECTION-SCREEN OUTPUT.
Design selection parameters dynamically
PERFORM sub_set_file_param.
FORM sub_set_file_param .
LOOP AT SCREEN.
If Upload is check
    IF NOT p_upload IS INITIAL.
      IF screen-group1 = 'M2' OR
         screen-group1 = 'M3' OR
         screen-group1 = 'M4'.
        screen-active = 0.
      ENDIF.
    ELSE.
If Edit Tables is check
      IF screen-group1 = 'M1'.
        screen-active = 0.
      ENDIF.
    ENDIF.
If Replace Component is check
    IF p_rp_cmp IS NOT INITIAL.
      IF screen-group1 = 'M4' OR
         screen-group1 = 'M5'.
        screen-active = 0.
      ENDIF.
    ELSE.
If Edit Lines is check
      IF screen-group1 = 'M3'.
        screen-active = 0.
      ENDIF.
    ENDIF.
Modify the screen
    MODIFY SCREEN.
ENDLOOP.
ENDFORM.

Selection screen variant for report

Hi,
Can we restrict the selection screen variants for reports by user? For example my report is ZREPORT. Different users can save variants for the report. When they choose a variant for executing the report, they would like to see only the variants they created.
By default SAP lists all variants created (irrespective of who created).
Thanks
Anil

Hi,
If you want the other users doesn't want to execute (Not see) other variant..you can check if that user has created the variant in the AT SELECTION-SCREEN event..
By checking VARI-VARIANT against the table VARID and check if sy-uname <> VARID-ENAME.
Thanks,
naren

Error when generating the selection screen '0005'of report 'XYZ'

Hi All,
We copied std SAP pgm and were trying to rename the one of the screen but couldnt. When I tried to transport it to test system it went in to dump giving the error Error when generating the selection screen '0005'of report 'XYZ' .
Please advise me on how to remove this dump.
Regards
Saurabh

If you look at the selection screen, you'll probably find that there are overlapping elements (text elements over select-options) or something like that.
Rob

Selection screen for HR report with logical database PNP

Hi All,
I am writing a HR report. And I use the logical database PNP. Also I create a HR report category for this report. In the report category, I can define the selection screen field. But all these fields are selection option format. My question is How can I add parameters, radiobutton group and checkbox in the selection screen. Thanks.
Alex

Hi Alex,
Sorry for replying so late. Please try this tutorial:
w w w. s a p t e c h n i c a l. c o m -> tutorials -> ABAP-HR -> Creating HR Report category in PNP logical database
Sorry, I put it like this, because direct link doens't let me post the answer. Don't know why.
It can also be something with your custom code in selection screen. Though it works fine for, try to remove COMMENTs and observe the result. Maybe parameters are overlapping somehow. First try this:
SELECTION-SCREEN begin of BLOCK blk2 WITH FRAME TITLE text-002.
PARAMETERS RefDate type DATS.
parameter BFlag type c RADIOBUTTON GROUP grp1.
PARAMETER FFlag type c RADIOBUTTON GROUP grp1.
parameters days type i.
PARAMETERS spvsr like PA0001-MSTBR.
selection-SCREEN end of BLOCK blk2.
If that works together with the report category, try to extend it with adding a selection-screen comment, but do this in reversed order (comment goes first and FOR FIELD addition is supplied) like this:
SELECTION-SCREEN begin of BLOCK blk2 WITH FRAME TITLE text-002.
PARAMETERS RefDate type DATS.
SELECTION-SCREEN begin of line.
SELECTION-SCREEN COMMENT 3(10) text-003 for field bflag. "FOR FIELD, and goes first
parameter BFlag type c RADIOBUTTON GROUP grp1.
SELECTION-SCREEN COMMENT 16(10) text-004 for FIELD fflag. "here two
PARAMETER FFlag type c RADIOBUTTON GROUP grp1.
SELECTION-SCREEN end of line.
parameters days type i.
PARAMETERS spvsr like PA0001-MSTBR.
selection-SCREEN end of BLOCK blk2.
If still not working, see if text-003 and text-004 are not too long (you expect them to be 10 chars), This may somehow affect selection screen.
You may also try with setting cursor position explicity by:
SELECTION-SCREEN begin of line.
SELECTION-SCREEN POSITION 3.
SELECTION-SCREEN COMMENT (10) text-003 for field bflag.
parameter BFlag type c RADIOBUTTON GROUP grp1.
SELECTION-SCREEN POSITION 16.
SELECTION-SCREEN COMMENT (10) text-004 for FIELD fflag. "here two
PARAMETER FFlag type c RADIOBUTTON GROUP grp1.
SELECTION-SCREEN end of line.
It is really hard to identify where can be a bug as it is working fine for me. Keep trying with different variations, it should finally run with some.
Regards
Marcin

How can I add a new field in selection screen for this report

*& Report ZGS_BARKODLA_HIZLI_GIRIS
report zgs_barkodla_hizli_giris.
tables: mara,
        mseg,
        mch1,
        *mch1,
        mkpf,
        mchb ,
        makt.
type-pools: esp1.
data: i_message_tab type esp1_message_tab_type,
      wa_message_tab type esp1_message_wa_type ,
      sc_count type i.
ALV
type-pools: slis, kkblo.
data: gs_layout   type slis_layout_alv                     ,
      gt_fldcat   type slis_t_fieldcat_alv with header line,
      gt_header   type slis_t_listheader   with header line,
      gt_sortin   type slis_t_sortinfo_alv with header line,
      g_repid     like sy-repid                            .
define add-fieldcat.
gt_fldcat-fieldname     = &1.
gt_fldcat-ref_tabname   = &2.
gt_fldcat-seltext_s     = &3.
gt_fldcat-seltext_m     = &3.
gt_fldcat-seltext_l     = &3.
gt_fldcat-reptext_ddic = &3.
gt_fldcat-ddictxt       = 'M'.
append gt_fldcat.
clear gt_fldcat.
end-of-definition.
types: begin of titab,
        sel   type xfeld,
        matnr type matnr,
        maktx type maktx,
        charg type charg_d,
        menge type menge_d,
        erfmg type erfmg,
       end of titab.
data : witab type titab.
data : itab type table of titab.
data : ok_code type sy-ucomm.
controls: tc_itab type tableview using screen 0100.
data: gv_header like bapi2017_gm_head_01,
      gv_code   like bapi2017_gm_code.
BAPI export parameters
data: gv_headret type bapi2017_gm_head_ret,
      gv_matdoc type bapi2017_gm_head_ret-mat_doc,
      gv_matyear type bapi2017_gm_head_ret-doc_year.
data : lv_objek like inob-objek .
data : ls_inob like inob .
data : imseg type ty_t_mseg.
data : wmseg type mseg.
data : answer.
data : count type i.
data : v_atinn type atinn.
BAPI movement details
data: i_goodsmvt_items type bapi2017_gm_item_create occurs 0
      with header line.
data: i_return type bapiret2 occurs 0 with header line.
start-of-selection.
call function 'CONVERSION_EXIT_ATINN_INPUT'
   exporting
     input = 'Z_ORAN'
   importing
     output = v_atinn.
call screen 100.
*&      Module status_0100 OUTPUT
module status_0100 output.
set pf-status '100'.
set titlebar '100'.
mseg-werks = 1000.
mseg-umwrk = 1000.
**added
sc_count = sc_count + 1.
if sc_count eq 1.
    mseg-bwart = 313.
endif.
mkpf-budat = sy-datum.
**added
describe table itab lines tc_itab-lines.
endmodule.                 " status_0100 OUTPUT
*&      Module user_command_0100 INPUT
module user_command_0100 input.
data field(20).
data: line_t like sy-index.
data: lines like sy-index.
data line_count like sy-loopc.
data: begin of cols,
         screen      like screen,
         index       type i,
         selected(1) type c,
         vislength   like icon-oleng,
         invisible(1) type c,
       end   of cols.
case ok_code.
    when 'DELE'.
      delete itab where sel eq 'X'.
    when 'ENTE'.
      check *mch1-charg is not initial.
      read table itab into witab with key charg = *mch1-charg.
      if not sy-subrc is initial.
        witab-charg = *mch1-charg.
        select single matnr from mch1 into witab-matnr
                           where charg eq witab-charg.
        if not syst-subrc is initial.
          set cursor field '*MCH1-CHARG'.
          message e115(12) with *mch1-charg.
        endif.
        select single maktx from makt into witab-maktx
                           where matnr eq witab-matnr
                             and spras eq syst-langu.
        witab-erfmg = 1.
        concatenate witab-matnr witab-charg into lv_objek .
        clear ls_inob .
        select single * into ls_inob
                        from inob
                        where objek = lv_objek and
                              klart = '023'    and
                              obtab = 'MCH1' .
        select single atflv from ausp into witab-menge
                 where objek = ls_inob-cuobj and
                       klart = '023' .
        append witab to itab.
**added
        clear *mch1-charg.
**added
      endif.
    when 'SAVE'.
      if mkpf-budat is initial.
        set cursor field 'MKPF-BUDAT'.
        message e055(00).
      endif.
      if mseg-lgort is initial.
        set cursor field 'MSEG-LGORT'.
        message e055(00).
      endif.
      if mseg-umlgo is initial.
        set cursor field 'MSEG-UMLGO'.
        message e055(00).
      endif.
      if mseg-bwart is initial.
        set cursor field 'MSEG-BWART'.
        message e055(00).
      endif.
      refresh imseg.
      loop at itab into witab.
        move-corresponding witab to wmseg.
        append wmseg to imseg.
      endloop.
      call function 'ZMM_POPUP_WITH_DATA'
        exporting
          imseg = imseg
        importing
          answer = answer.
      if answer eq 'Y'.
        perform create_goods_movement.
      endif.
    when 'P--'.
      clear ok_code.
      perform paging using 'P--'.
      set cursor field 'MARA-MATNR' line 1.
    when 'P-'.
      clear ok_code.
      perform paging using 'P-'.
      set cursor field 'MARA-MATNR' line 1.
    when 'P+'.
      clear ok_code.
      clear lines.
      perform paging using 'P+'.
      set cursor field 'MARA-MATNR' line 1.
    when 'P++'.
      clear ok_code.
      perform paging using 'P++'.
      set cursor field 'MARA-MATNR' line 1.
    when 'SORA'.
      read table tc_itab-cols into cols with key selected = 'X'.
      if sy-subrc is initial.
        field = cols-screen.
        field = field+5(10).
        sort itab ascending by (field).
      endif.
    when 'SORZ'.
      read table tc_itab-cols into cols with key selected = 'X'.
      if sy-subrc is initial.
        field = cols-screen.
        field = field+5(10).
        sort itab descending by (field).
      endif.
    when 'PRNT'.
      perform write_alv.
endcase.
endmodule.                 " user_command_0100 INPUT
*&      Module read_table OUTPUT
module read_table output.
mara-matnr = witab-matnr.
makt-maktx = witab-maktx.
mch1-charg = witab-charg.
mseg-menge = witab-menge.
mseg-erfmg = witab-erfmg.
line_count = sy-loopc.
endmodule.                 " read_table OUTPUT
*&      Module write_table INPUT
module write_table input.
witab-matnr = mara-matnr.
witab-maktx = makt-maktx.
witab-charg = mch1-charg.
witab-menge = mseg-menge.
witab-erfmg = mseg-erfmg.
modify itab from witab index tc_itab-current_line.
endmodule.                 " write_table INPUT
*&      Module exit INPUT
module exit input.
leave to screen 0 .
endmodule.                 " exit INPUT
*&      Form create_goods_movement
form create_goods_movement .
clear : gv_header, i_return[], i_goodsmvt_items[].
gv_header-doc_date = gv_header-pstng_date = mkpf-budat.
gv_header-pr_uname = sy-uname.
GM with reference to reservation
loop at itab into witab.
    i_goodsmvt_items-material   = witab-matnr.
    i_goodsmvt_items-entry_qnt = witab-erfmg.
    i_goodsmvt_items-entry_uom = 'ST'.
    i_goodsmvt_items-move_type = mseg-bwart.
    i_goodsmvt_items-plant      = mseg-werks.
    i_goodsmvt_items-stge_loc   = mseg-lgort.
    i_goodsmvt_items-move_plant = mseg-umwrk.
    i_goodsmvt_items-move_stloc = mseg-umlgo.
    i_goodsmvt_items-batch      = witab-charg.
    append i_goodsmvt_items.
endloop.
find BAPI processing transaction
if gv_code is initial.
    perform determine_bapi_code using mseg-bwart
                             changing gv_code.
endif.
call function 'BAPI_GOODSMVT_CREATE'
    exporting
      goodsmvt_header = gv_header
      goodsmvt_code    = gv_code
    importing
      goodsmvt_headret = gv_headret
      materialdocument = gv_matdoc
      matdocumentyear = gv_matyear
    tables
      goodsmvt_item    = i_goodsmvt_items
      return           = i_return[].
cancel blocking process
loop at i_return where type eq 'E' or type eq 'A' or type eq 'X'.
    exit.
endloop.
if sy-subrc ne 0.
    refresh i_message_tab.
    call function 'BAPI_TRANSACTION_COMMIT'
      exporting
        wait = 'X'.
    wa_message_tab-msgid = 'M7'..
    wa_message_tab-msgty = 'S'.
    wa_message_tab-msgno = '060'.
    wa_message_tab-msgv1 = gv_matdoc.
    wa_message_tab-msgv2 = ''.
    wa_message_tab-msgv3 = ''.
    wa_message_tab-msgv4 = ''.
    append wa_message_tab to i_message_tab.
else.
    refresh i_message_tab.
    call function 'BAPI_TRANSACTION_ROLLBACK'.
write a message as there is an unexpected error.
    loop at i_return.
      wa_message_tab-msgid = i_return-id.
      wa_message_tab-msgty = i_return-type.
      wa_message_tab-msgno = i_return-number.
      wa_message_tab-msgv1 = i_return-message_v1.
      wa_message_tab-msgv2 = i_return-message_v2.
      wa_message_tab-msgv3 = i_return-message_v3.
      wa_message_tab-msgv4 = i_return-message_v4.
      append wa_message_tab to i_message_tab.
    endloop.
endif.
call function 'C14Z_MESSAGES_SHOW_AS_POPUP'
    tables
      i_message_tab = i_message_tab.
endform.                    " create_goods_movement
*&      Form determine_bapi_code
form determine_bapi_code using p_bwart type bwart
changing p_code type bapi2017_gm_code.
data: lt_t158b type table of t158b with header line.
clear p_code.
select tcode from t158b into corresponding fields of table lt_t158b
where bwart eq p_bwart.
loop at lt_t158b.
    select single gmcode from t158g into p_code
    where tcode eq lt_t158b-tcode.
    if sy-subrc is initial.
      exit.
    endif.
endloop.
endform. " determine_bapi_code
*&      Form paging
form paging using code.
data: i type i,
        j type i.
case code.
    when 'P--'. tc_itab-top_line = 1.
    when 'P-'.
      tc_itab-top_line = tc_itab-top_line - line_count.
      if tc_itab-top_line le 0.
        tc_itab-top_line = 1.
      endif.
    when 'P+'.
      i = tc_itab-top_line + line_count.
      j = tc_itab-lines - line_count + 1.
      if j le 0.
        j = 1.
      endif.
      if i le j.
        tc_itab-top_line = i.
      else.
        tc_itab-top_line = j.
      endif.
    when 'P++'.
      tc_itab-top_line = tc_itab-lines - line_count + 1.
      if tc_itab-top_line le 0.
        tc_itab-top_line = 1.
      endif.
endcase.
endform.                    " paging
*&      Form write_alv
form write_alv .
perform find_list_header.
perform fill_field_cat.
perform fill_sortinfo.
g_repid = sy-repid.
gs_layout-colwidth_optimize = 'X'.
gs_layout-zebra             = 'X'.
answer = 'Y'.
call function 'REUSE_ALV_GRID_DISPLAY'
    exporting
      i_buffer_active        = ''
      i_callback_program     = g_repid
      i_save                 = 'A'
    i_callback_top_of_page = 'TOP_OF_PAGE'
      is_layout              = gs_layout
      it_fieldcat            = gt_fldcat[]
     it_sort                = gt_sortin[]
    tables
      t_outtab               = itab[].
endform.                    " write_alv
     Form find_list_header
form find_list_header.
data : v_datum(10),
         v_datlo(10),
         v_dathi(10),
         v_uzeit(8).
clear: gt_header, gt_header[].
gt_header-typ = 'H'.
gt_header-info = sy-title.
append gt_header.
clear gt_header.
gt_header-typ = 'S'.
gt_header-key = 'Çalıştırma Zamanı : '.
write syst-datum to v_datum.
write syst-uzeit to v_uzeit.
concatenate v_datum '/' v_uzeit into gt_header-info.
append gt_header.
endform.                    " find_list_header
     Form fill_field_cat
form fill_field_cat.
refresh gt_fldcat.
clear   gt_fldcat.
gt_fldcat-key = 'X'.
add-fieldcat 'MATNR' 'MARA' ''.
add-fieldcat 'MAKTX' 'MAKT' ''.
add-fieldcat 'CHARG' 'MSEG' ''.
gt_fldcat-do_sum = 'X'.
add-fieldcat 'MEINS' 'MARA' 'Olcu Birimi '.
gt_fldcat-do_sum = 'X'.
add-fieldcat 'ERFMG' 'MSEG' 'Adet'.
endform.                    " fill_field_cat
     Form fill_sortinfo
form fill_sortinfo.
gt_sortin-up            = 'X'.
gt_sortin-fieldname     = 'MATNR'. append gt_sortin.
endform.                    " fill_sortinfo
     Form top_of_page                                              *
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
    exporting
      i_logo             = 'ZKUTAS'
      it_list_commentary = gt_header[].
endform.                    " top_of_page

HI,
if it is a normal report program then you can directly create a Selection screen field.
After the Type-pool you can use Parameters or Select-options to create the selection screen field..
If it is a Modulpool program then you can create a selection scren field like
SELECTION-SCREEN BEGIN OF SCREEN 1100 AS SUBSCREEN.
PARAMETERS: p1(10) TYPE c.
SELECTION-SCREEN END OF SCREEN 1100.
defines a selection screens 1100 as subscreens.
The next screen number of screen 100 is 100 (statically-defined).
PROCESS BEFORE OUTPUT.
MODULE status_0100.
CALL SUBSCREEN area INCLUDING sy-repid number.
PROCESS AFTER INPUT.
MODULE cancel AT EXIT-COMMAND.
CALL SUBSCREEN area.
MODULE user_command_0100.
look at the below link
http://help.sap.com/saphelp_nw2004s/helpdata/en/e7/deb237b9a9a968e10000009b38f8cf/content.htm
Regards
Sudheer

Parameter inactive in the selection screen of a report with logical datab.

I`m using a logical database in a report (PNP).
I need put as inactive some parameters of the selection screen. How can i do it ??? From customizing ???
Thanks

Hi,
Check this code..
" In screen loop You need to inactive the field.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF screen-name CS 'PNPKOKRS' OR
       screen-name CS 'PNPKOSTL' OR
       screen-name CS 'PNPORGEH'.
      screen-active = '0'.
      screen-invisible = '1'.
      MODIFY SCREEN.
      CLEAR screen.
    ENDIF.
ENDLOOP.

Bypassing selection screen in custom reports added to MSS reporting

Similar Messages

Maybe you are looking for