Byte Corseca headset - Charging problem

Hi,
I am using byte Corseca bluetooth headset for more than one year. Last 2 months back i got an issue in charging the headset. When i connect the headset to power source (USB Charging) usually i will show the red light glowing constantly. But now it starts blink with in 2-5 sec after i connect it to the power source.
I am looking for the solution and the service center or any source of help for this but i failed.
Kindly let me know what should i do now.
Thanks
Murali krishna

Hi,
Sorry you're having problems with those headphones. When you say that you're connecting them to a USB charging power source, does that mean you're plugging the USB cable into your computer? Or is that USB cable connected to a power outlet?
You also said it's been happening for 2 months. Are the headphones still charging, and if so, are you able to use the headphones?
I would recommend trying a couple different things. First, if you're plugging those headphones into a computer to charge, try plugging the USB (with adapter) into a wall outlet to see if that affects the charging ability.
Next, I would recommend removing those bluetooth headphones from Windows, then try to pair them up again and see if that helps at all.
Unfortunately, from what I can see those headphones are pretty much considered "plug and play". I could not find any documentation on troubleshooting that particular make and model. I'll keep looking and ask around to see if anyone else has any suggestions that we can try.
Todd

Similar Messages

Problem with Windows 8.1 and Corseca Byte BT headset

I recently bought a Corseca Byte bluetooth headset.
The headset works fine with phones.
Initially when connected to the laptop running windows 8.1 it works well and continues to flawlessly for hours.
The problem is when the headset is connected to the laptop but there is no audio streaming (e.g paused a movie playback for attending some other job) and resume playback after 10-15 minutes the audio starts stuttering/ becomes choppy. If I switch off the headset
and restart it works fine unless it lays unused for some time.
Windows recognizes the device correctly. I've turned off power management for BT devices and tried to update the drivers without any positive result.
Initially I thought the headset was defective but since it works flawlessly with phones I think it is a problem with Windows 8.1.
How to solve the issue?

Hi,
Have you also tried to disable power management on wireless network connection adapter? Since some OEM computers also combine some features of Bluetooth to wireless network connection adapter.
This issue can be mostly caused by drivers. Please contact the menufacturer's to see if the latest driver is compatible with Windows 8.1.
If not, I suggest you find the driver for Windows 8 /7 and install it in compatible mode in Windows 8.1 to see what's going on.
Also, post back the C:\Windows\Inf\setupapi.dev.log and event log you can find in event viewer related to this issue here for our research.
Kate Li
TechNet Community Support

Byte Corseca BT Stereo bluetooth Headset Not working in windows 8.1

Hi
I m using Byte Corseca BT Stereo bluetooth Headset its working fine in windows 8 . when i get update from microsoft windows 8.1 its not working ..Please any one give me the solution.
Thanks in Advance
Ramesh M

what is your laptop model?
update your Bluetooth driver, in order to work with Windows 8.1 your Bluetooth driver need to be updated
you can find updated driver from your manufactured site. I this Bluetooth comes with software, try to reinstall it
Please also check if there is any important update driver for your laptop

Macbook Pro 13 (Early 2011) Charging Problems

Recently I noticed that when I charge my macbook pro, the LED light on the magsafe would go green then orange to show that it is charging. However after a few minutes or seconds the orange LED light will go off (Stops Charging) and the whole process of charging starts again, green light then orange then nothing...
I already tried resetting the PRAM and SMU. I also tried using different wall sockets for charging and it yielded the same results. However, when i borrowed my friends mac charger, my MBP manage to charge without any problems. When he used my charger the charging problem also occurred.
So i decided to bring it to an Apple Authorized service provider sine they are no Apple Retail Stores in Thailand. I told the guy at the AASP that my charger was probably broken/faulty, but he said it was the receiver sensor of the macbook pro (The place where i connect the magsafe to my MBP ). He used a different charger (At the counter)and the LED lights when from Green, Orange then yellow and said the MBP needed to be sent to Singapore to be repaired and it would take 10 - 14 days. I said OK since my MBP was still in warranty and it would be free. Next day he called and said he fixed it by resetting something and that I could pick it up. At the AASP, the macbook pro didnt show any charging problems so i brought it home to charge.
Now it has the same charging problem as before...

Do you have another power adapter to try? If so, can you use the power adapter that came with this mac?
Do you have another MBP? If so can you use this power adapter on that MBP?
Are you using another pointing device or is it the one built right into the laptop? If you are using another pointing device try purchasing a new one or disconnecting or reconnecting or even try on another computer.
You might be only able to get buy for the next few month until you graduate until you can get your computer fixed. If all else fails go buy yourself a $8 mouse from a place, it will work until you can get this fixed... or buy apple mice if that is a big deal to you.
Here is one for only 3.18! http://www.bestbuy.com/site/Gear+Head-Computer+-+OM3800U+Mouse/3933383.p?id=1218 443155891&skuId=3933383
Or if you want the one I have used: (M515 @ home or HP Wired Mouse-- Its kind of old) This isn't the exact one but they discontinued that one: http://www.logitech.com/en-us/mice-pointers/mice/devices/mouse-m100 so for $10 you get a mouse and your computer works.

ZEN VISION:M CHARGING PROBLEM - H

[color="#ff0000"]ZEN VISION:M MP3 PLAYER CHARGING PROBLEM?My MP3 player was charging perfectly for the first 4 weeks of its life with me. I usually charged using the USB port on my computer. When connected, the player would come to life and the CHARGING ICON would appear and flash until the unit was fully charged and the CHARGED ICON would come on. Worked well. Now when I connect the player to the computer, instead of the CHARGING ICON coming on, the unit immediately begins playing music or going to the last mode it was in before being shut down previous to connecting for charging.
I have tried a reset of the whole player but that did not make any difference. I?encounter the same problem when connecting the player to the car?charger/power adapter. Can anyone give me some assistance? Cure?Thanks,? David B.

Lobsterboat wrote:
[color="#ff0000"]ZEN VISION:M MP3 PLAYER CHARGING PROBLEMMy MP3 player was charging perfectly for the first 4 weeks of its life with me. I usually charged using the USB port on my computer. When connected, the player would come to life and the CHARGING ICON would appear and flash until the unit was fully charged and the CHARGED ICON would come on. Worked well.Now when I connect the player to the computer, instead of the CHARGING ICON coming on, the unit immediately begins playing music or going to the last mode it was in before being shut down previous to connecting for charging. I have tried a reset of the whole player but that did not make any difference. I encounter the same problem when connecting the player to the car charger/power adapter.Can anyone give me some assistance? Cure?Thanks, David B.
I have exactly the same problem, but its because i've had to re-install windows and it wont deect it atall. Ive emailed creative support waiting for supply. i hope i get an answer soon

2nd dead iPod Touch 4G in 2 months? Battery/charging problems!

Hi everyone,
It seems as of tonight that I will have to return my second iPod Touch 4G in the last two months. In both cases, it was an issue where the device would no longer charge, and became very hot on the top of the back panel when the device was turned on even for a few seconds (while not being plugged in). In the first case, the device seemed to be defective from the time I opened the box, which was confirmed at an Apple Store, but they asked me to ship it to Apple Repair to be checked out. Apple took a very long time to get a replacement to me, but was good about that problem, and I was happy with the replacement for the past month when all of a sudden tonight the new one would not change and became very hot.
Is this an issue that anyone else has seen? I essentially only charged it off of my laptop or a wall charger unit, but it seems like the battery essentially is shorting out. I love this device, but actually need to use a PDA-type device enough that I am questioning whether I should get a replacement or go back to my old Palm TX.
Thanks for any thoughts/feedback on my iPod Touch 4G battery/charging problems.
Message was edited by: eliotjasper

Most battery complaints complain about loss of charge. The iPod is designed to lose heat through the back as the battery discharges. This is most common when using the device a lot - like playing games. If yours will no loner charge, by all means return it to Apple.
As far as being a PDA goes, it is as good as any smart phone out there. The PDA, as you once knew it, is dead and has been for 5+ years. Take your iPod to an Apple store and insist on a replacement.

Syncing and Charging Problem with 1st gen iPod nano

I purchased a 1st generation iPod nano via eBay about 3 months ago and have developed an interesting syncing and charging problem. When I plug the nano to my iMac, frequently neither the computer nor iTunes will recognize it. I have done "the five R's" with occasional success. I've tried jiggling the cable in the computer port and sometimes it works in getting iTunes to recognize the nano, sometimes it doesn't. Even when I am able to get iTunes to recognize the nano, I have frequently found that the nano hasn't charged up at all. In fact, a couple of times I found it almost totally drained of power after having been connected to my computer. Yes, I have the most recent version of iTunes installed on my iMac and my iMac, by the way, is relatively new - having been purchased in May of this year. What is interesting is that I've taken my nano to work and it has absolutely no problem charging up on my Dell (yuk!). For the record, I do not have iTunes installed on my work computer and I am not allowed to add any apps to my work computer without the consent of my supervisor. The chances of getting iTunes installed on my Dell at work are pretty much nil. Any suggestions on how I can fix the problem?

I bought a new USB dock connector and hoped, with fingers and toes crossed, that something positive would happen. Sure enough, I was able to sync and recharge my old iPod nano. I guess the original USB dock cable is on its last legs. Not totally broken, but no longer reliable. I consider my problem solved! My thanks to everyone who took the time to read and try to solve my iPod problem. I greatly appreciate it!

Macbook Pro Charge problems

So I have a Macbook Pro I bought in August 2010, which over the last 3 days has started developing charging problems. It does one of the two of the following: I plug the charger in, the charge light will come on and the laptop will charge for about 45 secs before dropping out completely needing to be physically disconnected and switched off at the wall for at least a minute before it starts working again, for the same effect. Or, I plug it in, it charges for about 30 secs, then resets itself as if it had only just been connected, charges for another 30 secs, resets, charges for another 30 secs repeats, etc etc.
Wondering if anyone else has experienced this issue?
As you can imagine, this is making life really REALLY difficult for trying to keep my laptop charged.
I have tried the various tricks listed on the Apple troubleshooting website, and nothing has worked long term. I am sure the power points I am using are good, because they are the same points I use day in and day out at work/school.
I am considering taking the adapter to the nearest Apple Reseller to me, and getting them to check it/replace it if it is naffed. I am also considering getting it replaced with the more powerful 85 watt adapter rather than the 60 watt, if I am able to do so...

There are several reasons that the power adpater is behaving as it does. However, since you've "tried the various tricks listed on the Apple troubleshooting website, and nothing has worked long term", the only thing left is to try a new power adapter. Be sure to bring in your old adapter with your computer.

Display problem, charging Problem

DISPLAY PROBLEM & CHARGING PROBLEM ACER LIQUID E700, INVOICE NO.S8001A/14-15/6959 INVOICE DT:02-02-2015

rajuwilsonk,
If the phone is not charging I would recommend getting in touch with your reseller or Acer technical support in your area for options.

1st-Gen iPod charging problems

I have had a 1st-gen iPod touch since Dec 2008 and really love it. One annoying problem that I have found with it is a charging problem that I think that I have finally nailed down. I use a wall charger to charge my iPod while idle and while I use it. When I am using my iPod while charging, I have noticed that it sometimes does not charge properly. It appears that when using certain apps such as Pandora or other non-Apple apps, the battery indicator will go from the charge symbol (lightning bolt) to charged (plug) even if the battery is nearly discharged. I've tried resetting the iPod, etc. and the problem persists. I can switch apps from Pandora to the built-in music player and the batter will resume charging. Does anyone have any details on this behavior? I was unable to find anything searching the web. Thanks!

I have a 2nd gen and have not noticed that with Pandora or actually any other app. That seems pretty strange that an app would suspend charging. You should at least try to correct it with a restart, reset, restore routine. If you are not familiar with how to do these things, it's pretty simple.
Restart - hold the Sleep/Wake button until you see the red slider. Turn the iPod off. Restart by holding the Sleep/Wake button down until you see the Apple logo and release it.
Reset - hold the Sleep/Wake button and the Home button down together for approx. 10 seconds until you see the Apple logo. Release the buttons.
Restore - plug your iPod into iTunes and, on the Summary page, select Restore.

IPod Touch 4G Charging Problems

The third-party charger that I have been using for a year stopped working. I eventually figured out it was the charger, not my PC or iPod. So I use my old Apple charger that came with my iPod which stopped working somewhere in mid 2012 early 2013 (got iPod on Christmas 2011). When my iPod dies, I plug it in with the Apple charger. It will boot up unless I touch it, even a bit, and I have to reconnect it to charge it. Then, while I'm not there, iOS boots, as usual. But, it shows a charging battery in the corner, but the lock screen has my wallpaper, not the battery. Everyonce in a while when it's plugged in, it will go from 20% to having the full charged symbol, and it's not fully charged. Everyonce in a while it also says "Charging not support with this accessory". Also erlier today when my iPod was plugged in, it made the charging sound, one after the other, four times. And nobody was there and the charger was exactly how it was left. It is starting to get really bad and I might get a new (sorry, non-Apple) device. PLEASE HELP! Thank you.

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
could be bad cable or bad'/dirty dock connector in the iPod

Charging problem with nokia 603

Hi, I just bought Nokia 603 one week back but i had to give it back to nokia are for charging problem, anyway my point is all nokia hardly had problems with charging but now with nokia 603 it is really strange. Can Nokia please check in to this

Please mention, kind of charging problem.
Even on my 701, charging port given keeps on disconnecting now and then. Maybe because of new fast charger.
-------------------If this post helped you, click on accept as solution.------------------
-----------------------------Appreciate by clicking on white star.----------------------------

TS2634 ipad 3 charging problem?

I have a ipad 3 that has a charging problem as of late. It will not charge while it is on. I first have to turn my ipad off and then plug it in and then the ipad will turn itself back on and will charge. Thats the only way i can get it to charge.It wont connect to my pc anymore to connect to iTunes. When I connect it to my pc I get a USB not recognize by this device or some USB error. I tried the same thing by turning the ipad off first and connecting it to the pc. It just turn on and I receive the same message on my pc. What should I do? I'm thinking I may need another USB cable but I'm not sure yet. Please help!

IF the reset doesn't help, try swapping out the cable.
Also, your ipad is best charged plugged into the wall with the supplied charging brick.
Usually charging/syncing problems are one of four things
Bad power brick
Bad USB cable
Bad outlet
In your situation you may also want ot restart your computer, use a different USB port.
If none of that swappage and restarting fixes it then you may want to make an appointment at your local apple store because it's possible that there's something worng with the port on your iPad. And that is beyond a user fix.

Missing iPhone BT Headset Charge Level on main Lock Screen since 1.1.1

Hi prior to 1.1.1 the phone used to show the BT headset charging status on the mainscreen along with the phone's charge level...
However since I installed 1.1.1 i don't get this here, but I will see the charge level in the main title bars when they are both undocked and paired.... Anyone else seeing this anomoly?

Hey Folks.... Here's a tip for the wise...
Make sure your BT adapters are disconnected or out of the cradle before doing a update... I had to just restore my iPhone to get both to show correctly on the screen... They were both plugged in and charging from my travels when I got the notice and approved the iPhone update....
Thus the reason why I couldn't see the headset option on the charging screen...
As an FYI for those of you as you get ready to continue with your updates!

Display & Charging Problem - X220

I have the i7 X220. It's been great, but I'm starting to have a few issues. Just want to get some feedback in case there's something simple I need to do before contacting service and probably sending it in for repair (it was purchased March 2010).
1) Display is great 98% of the time, but I notice that the colors go off - a bit day glo/neon, if I move the laptop while it's on and in use. This used to be just if I walked across the room, now it happens sometimes even if I just move it from my lap. The same thing occurs sometimes after I've been using it for a while. Wondering if it's heat related or if I have a loose connection somewhere. Note that it generally goes right back to good if I refresh the display.
2) A more serious issue - I've had charging problems with this laptop off and on for the last few months. I purchased a spare power supply and battery, and I noticed that it seemed to charge fine with the newer power supply, but was random with the old one. Batteries didn't seem to make a difference. Today, once again I can't get it to charge at all - with either power supply or battery.
You're thinking, "Well just send it in for service." That's probably what I'll have to do, but these tend to be random issues, and I've not had good luck with repairs in the past when that was the case. So, just trying to get some background and see if these are known issues.
Thanks.

hey shazza,
for #1 , i'm guessing a loose cable is causing this since it happens when you move the unit. If you want, use this >> http://support.lenovo.com/en_US/guides-and-manuals/detail.page?DocID=UM006464
open your unit and ensure all cables is connected correctly.
another thing you can try is to uninstall the current graphic driver for your unit , let windows install its generic drivers and see if it happens again.
now for #2 , that is something I will have to say send it to service. I have not seen that happen before.
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Byte Corseca headset - Charging problem

Similar Messages

Maybe you are looking for