C/C++ API for JMS ?
Hi,
Is there any open standard C/C++ API to connect to JMS?
Eric
http://www.codemesh.com/en/JMSCourier.html
Similar Messages
-
Hi,
I have developed an appication using JMSCAPI in windows. Now i have to migrate
the code to linux C. pls help me in finding JMSCAPI for Linux .
Thanx and Regards
Venkat
Another customer requested this on 11/14 in this
newsgroup. There is no Linux port at the moment.
I will make the person who is responsible aware of
your request, and he will respond in the newsgroup.
Tom, BEA
Venkata Gupta wrote:
> Hi,
> I have developed an appication using JMSCAPI in windows. Now i have to migrate
> the code to linux C. pls help me in finding JMSCAPI for Linux .
>
> Thanx and Regards
> Venkat
-
Problem JMS-c api for message Acknowledgement
Hi,
I am working in a project that uses bea-JMS C api for
Communictions.In my project i am using topic messaging for message reciving and sending..Here i am using durablesubscriber for receiving and client Acknowledgement to Acknowledge the message.
In receiving function I store the message in another JmsMessage for Client-Acknowledgement.
Here comes one problem that, while i Acknowledge on the receive function each and every message Acknowledge correctly.But while i Acknowledge that message from some other function it return -1 as , that it cannot Acknowledge.The other function is working in another thread.
Wheather the seprate thread will make the problem for confirmation.Similar to JDBC connections, JMS sessions and their related child producers and consumers are not thread-safe (with the one exception of the session.close() method).
For example, without added application level locking, its not safe to acknowledge a message from one thread while another thread receives or produces a message. This has special implications for asynchronous consumers, as once the asynchronous consumer is created, access to the session and objects is limited to code within the "onMessage()" and "onException()" callbacks.
This behavior is detailed in the JMS specification.
Tom -
Hi,
Is there a version for JMS C API for AIX ? Where can I find it ?
Thanks,
Ziv
If your willing to use an untested binary, I suppose you
might be able to get BEA to compile one for you (the
majority of work in a new platform port is often just making sure
that it passes all tests, even if, as is often happens,
there is a 100% pass rate.) Again, I recommend making
sure you make a request through customer support and
make sure that JMS product manager Frazier Miller sees it.
z wrote:
> Our project is maintaining few platforms: HP, Solaris, AIX, etc ...
> Can we have the source of the C API implementation, so we would build it in any
> requested
> platform ?
>
> Tom Barnes <[email protected]> wrote:
>
>>No, just HP, Solaris, and Windows - with official
>>support (and more platforms) coming in the next
>>release. If you want an AIX version now, you
>>can contact customer support and file an enhancement
>>request. This request should then be forwarded to
>>the product manager for the JMS C API (Frazier Miller).
>>
>>As a work-around for C on AIX you can use rmi-iiop and
>>a C-based IIOP client - post to the rmi-iiop
>>newsgroup for details. There are other work-arounds as well.
>>
>>z wrote:
>>
>>
>>>Hi,
>>>
>>>Is there a version for JMS C API for AIX ? Where can I find it ?
>>>
>>>Thanks,
>>>Ziv
>>>
>>>
>>>
>>
>
-
Hi,
I need the JMS C API for Linux to connect to WLS(WebLogic Server).
Please let me know whether it is available for linux or not.
Thanking you in anticipation.
regards,
Subodh
Hi Tom,
Thanks a lot for the reply ,actually customer has a deadline ,earlier they were
using JMS C api for windows for using WebLogic JMS ,now they are moving to Linux
,so they need JMS C api urgently.
Please help me ,if possible try to escalate it.
Again,thanks a lot.
regards,
Subodh
Tom Barnes <[email protected]> wrote:
>Also note that there are several ways to contact
>WL from C without using JMS.
>
>Subodh Kumar wrote:
>> Hi,
>>
>> I need the JMS C API for Linux to connect to WLS(WebLogic Server).
>>
>> Please let me know whether it is available for linux or not.
>>
>> Thanking you in anticipation.
>>
>> regards,
>> Subodh
>>
>>
>
-
Where can I download the JMS C API for WLS 12c?
Where can I download the JMS C API for WLS 12c? It doeesn't appear to be bundled with the standard or supplemental WLS zip files, nor obvious as a separate download bundle. Searching oracle.com finds plenty of documents which reference its existence, but not how to obtain it (unless I missed something). Pointers appreciated, thanks.
Thanks. Unfortunately, that's just a reference to the documentation. As I said, there's lots of reference to the C API in the documentation but I need the source code (I have an existing application running against WLS8.1/Solaris that I want to port to WLS12c/linux).
-
Adapter Status Error : Error in creating message ID map for JMS message:
Currently in the SAP XI 3.0 JMS Adapter, I am receiving the following error
Error in creating message ID map for JMS message:
ie. Error while processing message 'de8265f6-c864-4479-1137-9bab17b78b3b'; detailed error description: com.sap.aii.adapter.jms.api.channel.filter.MessageFilterException: Error in creating message ID map for JMS message: ID:c3e2d840d8d4d7f14040404040404040c44f8e2213630b01 at com.sap.aii.adapter.jms.core.channel.filter.InboundDuplicateCheckFilter.filter(InboundDuplicateCheckFilter.java:103)
Although I am receivng this error, when I check the details of the message processing, all steps are successful and the message is set to status : DLVD
Audit Log for Message: de8265f6-c864-4479-1137-9bab17b78b3b
Time Stamp Status Description
09.06.2009 13:27:24 Success New JMS message with JMS message ID ID:c3e2d840d8d4d7f14040404040404040c44f8e2213630b01 received. The XI message ID for this message is de8265f6-c864-4479-1137-9bab17b78b3b
09.06.2009 13:27:24 Success JMS message converted to XI message format successfully
09.06.2009 13:27:24 Success RRB: entering RequestResponseBean
09.06.2009 13:27:24 Success RRB: suspending the transaction
09.06.2009 13:27:24 Success RRB: passing through ...
09.06.2009 13:27:24 Success RRB: leaving RequestResponseBean
09.06.2009 13:27:24 Success Transform: using Transform.Class: com.sap.aii.messaging.adapter.Conversion
09.06.2009 13:27:24 Success Transform: transforming the payload ...
09.06.2009 13:27:24 Success Transform: successfully transformed
09.06.2009 13:27:24 Success Application attempting to send an XI message synchronously using connection JMS_http://sap.com/xi/XI/System.
09.06.2009 13:27:24 Success Trying to put the message into the call queue.
09.06.2009 13:27:24 Success Message successfully put into the queue.
09.06.2009 13:27:24 Success The message was successfully retrieved from the call queue.
09.06.2009 13:27:24 Success The message status set to DLNG.
09.06.2009 13:27:25 Success The application sent the message synchronously using connection JMS_http://sap.com/xi/XI/System. Returning to application.
09.06.2009 13:27:25 Success The message was successfully transmitted to endpoint http://sapxia.swets.nl:8000/sap/xi/engine?type=entry using connection JMS_http://sap.com/xi/XI/System.
09.06.2009 13:27:25 Success The message status set to DLVD.
Not sure why this is occurring.......No, not using correlation id.
I was able to resolve the issue on this queue by changing the following setting
Under the PROCESSING tab, under XI SETTINGS
Time period for Duplicate Check for EO(IO) (secs) it was set to 86400
I have changed this to 300 seconds and the adapter has now gone green.
BUT......
That said, I have the exact scenario on another sender JMS channel set to 300 seconds and it exhibits the same issue.
correlation settings:
Set XI message id to = GUID
Set Xi conversation -
Hi,
I have following scenario :
Queue1
Bpel1 -> Writes Schema A to Queue1
Bpel2 -> Writes Schema B to Queue1
Bpel3 -> Reads from Queue1
I need that Bpel3 should read only Schema A from Queue and not Schema B.
So how will i define the correlation between Bpel1 & Bpel 3.
I tried fetching the processId in Bpel 1 and add it to Invoke property jca.jms.JmsCorrelation_id, but was not able to set the same in Bpel3.
Any help/spec in setting up correlation for JMS Queues is highly apreciated.
Thanks !!In standard JMS, an application can specify a correlation-id on per message basis using the javax.jms.Message API, and then specify a filter (a "selector") when creating a consumer via the javax.jms.Session API, but, in general, it is usually better to use a separate dedicated queue per business process (simplifies management, simplifies coding, improves perf, etc), or, if that's not an attractive option, to use a single MDB to dispatch messages from the same queue to different business processes. I don't know the specific steps to do the same in BPEL.
You might want to try posting to the BPEL forum at BPEL
Hope this helps,
Tom -
API for connection count?
Hi,
Does WLS have an API for querying the number of connections made via EJB/JMS
(JNDI's InitialContext)? How would it work in a cluster (will I get
connections for that box or for the cluster)?
Thanks,
Assaf PaznerHi,
We believe instead of using IMPORT_COUNTREQUEST API you can use a Dataload script to key in data in Physical Inventory form.
Basically you need to populate 4 fields in this form, i.e Physical Inventory, Date, Description & Snapshot Complete (checkbox).
Go ahead and write a Dataload script for the same.
Regards,
S.P DASH -
API for WebLogicServer8.1
I am currently using weblogic8.1 and workshop.
I am a developer, currently working in the webservices applications under workshop.
I want the complete api for weblogic server.
for example weblogic.jms.common.MessageFormatException or which classes and interfaces are there under com.bea.control package.
That api is very useful for me.
please help me if you know the answer.
just give me a mail to [email protected] for weblogic serverapi for weblogic serverIt sounds like you're looking for the Javadoc for the public WLS APIs.
The Javadoc for the public WebLogic Server classes can be found here:
http://e-docs.bea.com/wls/docs81/javadocs/index.html
You'll probably also want the Javadoc for the standard JMS API, since that's what you'll program most with when you use JMS. It can be found here:
http://java.sun.com/products/jms/docs.html
The weblogic.jms.common package is an internal package, so it's not Javadoced. All the BEA JMS classes implement the appropriate interfaces in the javax.jms package. In addition, there are some BEA-specific API extensions in the weblogic.jms.extensions package. -
I wanna find ebool about APIs for SOAP UDDI WSDL
� SOAP Messaging
� JAXM (JSR 67), SAAJ, JAX-RPC (JSR 101), JMS
� WSDL
� Java API for WSDL (JSR 110)
� JAX-RPC (JSR 101)
� UDDI
� JAXR (JSR 67)
If someone have and know about them,please tell me(send ebook or give me Link to download)
Thanks in advance!send mail to me at [email protected]
thanks in advance! -
Need API for creation of tag cloud
Hi,
I have a requirement to create a tag cloud based on a particular business logic. Does Webcenter provide API for the same?
Can I customize the "Tagging - Tag Cloud" task flow? If yes, how and to what extent?
Thanks in advance,
AnuragHi Ajit,
No another FM is available . U can directly create using transaction SE01 .
Or u can create using BDC . -
Using MySQL DB on Weblogic 10.3.2 for JMS Store and etc.
Hi,
I am planning to use MySQL DB w Weblogic 10.3.2 server.
I am planning to use Persistent JMS Destinations and planning to use MySQL Datasource for JMS store.
Can anyone please help me understand any serious issues or considerations of this combination?
Thanks
SagarHi,
I am planning to use MySQL DB w Weblogic 10.3.2 server.
I am planning to use Persistent JMS Destinations and planning to use MySQL Datasource for JMS store.
Can anyone please help me understand any serious issues or considerations of this combination?
Thanks
Sagar -
API for open purchase order creation
Hi,
Is thier any API for creation of open purchase order?
Thanks
trivenisee if this helps
Re: APIs in PO
Mahendra -
Error while passing ODI variable in JNDI Url for JMS Queue XML
Hi,
Facing a weird problem while passing ODI variable in JNDI Url for JMS Queue XML.
Below is the JNDI Url configured under ODI Topology:
JNDI Url: t3://<host_location>?d=#TEST.SCHEMA_FILE&s=<schema_name>&JMS_DESTINATION=jms/<queue_name>
where,
#TEST.SCHEMA_FILE --> ODI variable storing xsd name and location
Issue Description:
If we restart ODI server then for the first run of any ODI interface using JMS Queue XML, it is unable to get the value for ODI variable present in JNDI Url (d=#TEST.SCHEMA_FILE).
It throws error message saying: No XSD found
Temporary Resolution:
As a temporary fix if we hard-code and pass the value in that ODI variable as shown below, it will successfully go through.
eg: JNDI Url: t3://<host_location>?d=C:\XSD\test.xsd&s=<schema_name>&JMS_DESTINATION=jms/<queue_name>
Reverting it back to variable later will have no issues and subsequent run will succeed.
But again anytime later if server is restarted then first run will have this issue.
Want to have permanent fix for it.
Any one having idea on it please share. Appreciate your help!What ODI version are you using? It could be related to the bug in the older version as described in support note Doc ID 1290326.1
Maybe you are looking for
-
External HD's won't mount (& more) after update to 10.3.9
I updated from OS 10.3.2 to 10.3.9 using the Apple updater utility. After the update, external hard drives won't mount unless they are on when I boot up the computer. Also music cd's won't mount, but data cd's do. The only way I can eject the music c
-
Why won't Reader X display Welcome page created in AA 9 Pro?
I created a Portfolio file in Adobe Acrobat 9 Pro that includes a Welcome and want to view it in Adobe Reader X. Adobe Reader X opens the file but does not launch the Welcome page first- only the file icons page is displayed. The Welcome page is di
-
We are creating a standard PO and want to post multiple invoices against it using MIRO. For example, Total PO amount is $10,000, we want to be able to post invoice for $2000 today, second invoice for $3000 in 3 days and so on. Basically we just want
-
Help please! Problem accessing db connections from servlets
Hi all, I am creating a web application using MVC architecture using jsp,servlets and beans. I have created a login.jsp which accesses the LoginHandlerServlet.class. in login.jsp there are two fields. One is username and one is password. When fields
-
C++ Compiler aborts with licensing error message
SUN OS - 5.6 with CC compiler version : >>> Sun WorkShop 6 update 1 Compilers C++ >>> fails after a while when trying to do a Make of few C++ files , the error message is : >>> License Error : Licensing product (Sun WorkShop Compiler C++ SPARC). Lice