C/C++/Java/LabView/SCADA Software Engineer, Hertfordshire, England, UK, £20-30k+

My client is a leading small but growing specialist technology company based in Hertfordshire urgently seeking a Software Engineer.
In order to apply for this position, you MUST be eligible to work in the EU or UK and have ALL of the following:
1. At LEAST 1 year’s recent commercial experience as a Software Engineer programming in one of the following languages: C++, Java, C, LabView
2. Solid commercial experience and understanding of the full software lifecycle
3. 1+ recent years recent commercial experience of working on large scale applications and appreciation of how to design and build an extensible, maintainable software architecture
4. Strong commercial experience with quality control methods
5. Solid understanding of good programming practice
6. LabView familiarity would be extremely advantageous
XML, experience of databases or SCADA systems would be desirable.
The successful candidate can look forward to a competitive salary dependent upon experience. To discuss further, please send me a message or an email.

Dear Sir/Madam
I am Vivek Gupta and I have done B-tech in Electrical Engineering from one of the reputed institutes of India - M.M.E.C, Mullana in 2004. I have been working with Trident Techlabs Pvt Limited. as a Sr. Design Engineer(Power Automation) . Presently I am working on ENERGY MANAGEMENT SYSTEM. I have total two years of experience in SCADA field.
Please give a look at my attached resume and please consider it if there are any opportunities.
Looking forward to hear from you soon.
Thanking you in anticipation.
Regards,
vivek Gupta
+919811897922
Key Skills:- 2 years exp in SCADA(Power System Automatation) using NI labview ,DSC and Citadel database
Message Edited by R&D on 08-20-2006 11:32 PM
Attachments:
Vivek_Gupta.doc ‏46 KB

Similar Messages

Smart Software Engineer with LabVIEW experience (and acoustics a plus) needed in Boston, MA

We've are looking for a staff software engineer to join our company in Boston, MA (near downtown). We have a 3000+ vi application that has been in continuous development by multiple software engineers (currently 4 engineers + 1 intern) for 15 years. Every year we release a new version of the software with significant new features. An engineer with our company needs to be more than just a LabVIEW hacker. We need a software engineering that can go into our large application, modify it, sometimes in very fundamental ways, without breaking existing functionality, and have an eye for how their changes impact the maintainability, scalability, reliability, and readability of our code.
Candidates will likely be LabVIEW Architects or have equivalent experience if they don't have formal certification. We lean towards candidates who have Masters Degrees in such fields as Electrical Engineering, Mechanical Engineering, and Computer Science. Interviews will be conducted over phone, web, and in person by a LabVIEW Architect and will need to be able to discuss topics such as the following:
- coupling and cohesion in software design, how this relates to design paterns such as action engines
- software lifecycle models- state machines, parallel loop architectures, race conditions, data structures, type definitions, Xcontrols,
- Object Oriented design
- importance of documentation, importance and use of source code control
- pseudo code and its usefulness as a design tool, some exercises will require users to read and write pseudo code to solve classic computer science problems
- tradeoffs of various file formats in terms of flexibility for future software changes
- FFT, Frequency Response, Amplitude/phase, RMS level, dB, noise, averaging, distortion, loudness, A-weighting
Formal job ad is below:
To be considered for this position, please send resumé and cover letter explaining why you are the ideal candidate for this job (in Word or PDF format only) to [email protected]. Please use the subject title Software Programmer.
Programmer for Audio Test and Measurement software - Boston
Listen, Inc. is the market leader in PC based electro-acoustic test and measurement systems for testing loudspeakers, microphones, telephones, audio electronics, hearing aids and other transducers. We have been in business for over 15 years and our continued growth has created an opportunity for a software engineer to join our programming team. This is an exciting opportunity to work on an industry leading electro-acoustic test and measurement system used by numerous Fortune 500 companies in the field of loudspeaker, microphone, headphone, telecommunications and audio electronic manufacturing.
This position reports to the Software Manager. Duties include, but are not limited to:
Programming in LabVIEW
Designing and coding new Sound Measurement and Analysis software
Improving, reviewing and de-bugging existing code
Preparing internal and user technical documentation
Testing code
Interfacing with management, sales teams and customers to define tasks
Required skills / education
Bachelor’s degree (Masters preferred) in electrical engineering, mechanical engineering, computer science, physics, or similar subject
Strong background (4+ years) in programming with 1+ years in LabVIEW.
A methodical approach to coding, testing and documentation
The ability to work well in a small team. A willingness to challenge and discuss your own and other people’s ideas.
Experience in acoustic engineering is a plus. Relevant topics include FFT, Frequency Response, Amplitude/phase, RMS level, dB, noise, averaging, distortion, loudness, A-weighting
About Listen
Listen has been in business for over 15 years and our suite of PC & sound card audio test & measurement products is the accepted standard in many blue-chip companies worldwide. We offer the spirit and flexibility of a small company, combined with stability and an excellent externally managed benefits package which includes competitive salary, healthcare, paid vacation, retirement plan and more.
Applicants must have authorization to work in the US. We are unable to assist with visa / work permit applications.

we're interviewing candidates, but, this position is still available

Anyone looking for Software Engineer(LabVIEW/C++) opportunity in Pittsburgh, PA?

Hello, my name is Nicholas Ricchiuto and I am looking for a Software Engineer (LabVIEW/C++) for a company in Pittsburgh Called Acutronic. If you know of any Software Engineers looking for work, please pass along my information below, I could sure use your help. Thank you very much! -Nick
Nicholas Ricchiuto
B&V Stafffing Inc
724-933-5218
[email protected]
ATE Software Engineer (Pittsburgh, PA –RIDC Park)You will be responsible for a challenging new product development. In this role you will implementcomplex automated test algorithms and data acquisition software for inertial sensors and MEMS(micro-electro-mechanical systems) inertial devices.Your roles/responsibilities will include:• Translate marketing inputs into detailed requirements and planning documents• Design, code, debug, document and maintain software code in LabVIEW and C/C++/C#.• Plan and execute software releases• Plan and accomplish goals relying on experience and judgment Your qualifications/skills should include:• BS in Electrical Engineering, Computer Engineering or related field; MS preferred• 7+ years experience in automation, data acquisition, or related software development• Experience with National Instruments LabVIEW, Test Stand, and related tools• Experience developing user interfaces with National Instruments tools• Experience with defect tracking, configuration management and version control tools• Knowledge of C, C++, and real time operating system functionality a plus• Familiarity with all aspects of automation engineering including mechanical, electrical, controls, andinstrumentation disciplines• Experience with serial communication and networks in general• Experience integrating automation systems• Good knowledge of computer hardware and systems• Understanding of software process issues• Familiarity with SCRUM or other agile software development a plus• Experience in testing inertial sensors a plus• Must be a US Citizen or Permanent Resident

Please post this to the LabVIEW Job Openings board.

LabVIEW Developer + Software/Mechanical Engineer

Hello,
I am a LabVIEW developer with 3 plus years of experience in developing software applications for data acquisition, instrument control, motion control and image acquisition. I have a ME in Mechanical Engineering(control systems) from Texas A&M University. I am a Certified LabVIEW Associate Developer and currently working towards CLD status. I am located in TX and looking for fulltime opportunties as a Software Engineer/LV Engineer/Test Engiener. Willing to relocate, if the job is challenging and the offer is right.In addition to LV programming skills, I am experienced in J2EE,C++, object oriented methodology, UML and Visual Basic. If you are interested in my profile, send me an email and I will reply back with a full resume.Message Edited by marooner on 04-15-2005 01:30 PM

Adecco Technical is the leading provider of contract personnel and related staffing services. As a division of Adecco, the world's largest staffing company, ($13 Billion in sales), Adecco Technical has more than 100 offices in the U.S. alone.
Job Title: Labview Programmer
Labview Programmer with experience in motion control and high speed data acquisition.
RESPONSIBILITIES
The work incorporates the design and programming of specialty software for the motion control of high speed linear motors for the positioning and scanning of inline production parts.
Other projects include controls for process equipment.
This position requires a person who is well organized and can self manage a project from start to completion.
High degree of detail and the desire for perfection in the final product.
Perseverance to complete, detail, document and deploy the software.
REQUIREMENTS
A four year degree in Engineering is preferred.
Five years experience in Labview with at least three years in associating Labview in manufacturing automation and control.
The drive to accomplish projects and the need to get it right.
Thanks!
Elise Reisinger
Sr. Technical Recruiter
Adecco Technical
6081 E 82nd St., Suite 403
Indianapolis, IN 46250
317-842-2870
800-346-1203
[email protected]

Job Opening - LabVIEW Software Engineer

Belcan is an entrepreneurial and market driven organization committed to quality and customer satisfaction. Belcan is among the top 10% of the largest engineering firms in the country with over 6500 employees at 60 locations. The Advanced Engineering and Technology Division (AETD) of Belcan is a global provider of highly technical engineering services to a wide variety of industries.
We are currently looking for a LabVIEW Software Engineer to design and develop LabVIEW software based automated test systems for advanced jet engines, digital controls, electrical systems, and digital avionics.
Requires a Bachelor's degree in Electrical Engineering, Computer or Software Engineering or a related field, and 3 years of experience with National Instruments LabVIEW and other National Instruments products and technologies. Familiarity with the application of engineering concepts, practices, and procedures for: a) the development of digital system hardware interfaces b) interfacing computers, c) designing and developing automated test systems, data systems, and instrumentation. Familiarity with Real Time Operating Systems, embedded systems, and aircraft communications protocols is a plus.
Due to the nature of the work being done applicants must be U. S. Citizens or permanent residents. These are direct full time positions. We offer a very competitive compensation and benefits program. Please email your resume to [email protected] Belcan is an equal opportunity employer. EOE/M/F/D/V

The postion is located in Cincinnati, Ohio.

Building SCADA software for substation automation control using LabVIEW

Hi, I would be interested to know if anyone has built or developed a SCADA software for substation automation control using purely LabVIEW and its add-on tools (beside NI LookOut). The SCADA software, somehow similar to WinCC, should fulfill basic SCADA function for substation such as monitoring and interlocking control of CB and DS (single/double point), generate event or alarm list which includes information such as topical/not topical, valid/invalid...., archiving, redundancy, etc.

Hi Remzi,
Thank you for your information.
I understand that the DSC Module is a tool capable of developing monitoring and control system. Using the module would enable me to build a SCADA software (similar to LookOut) according to my requirement. But I think it's quite a difficult task to design and build a SCADA software from the scatch. Unlike a SCADA software, the DSC module is not really a SCADA software where user can directly parameter the I/O points and graphics via GUI. I've actually tried the LookOut software, but found that it's not really suitable for substation automation & control field. Hence, I would be grateful to know if anyone in this field has developed similar SCADA software for substation automation.
Best Regards,
Edmund

Job offering: Software Engineer (Java, Eclipse RCP) in domain of access networking [Ghent, Belgium]

Excentis is looking for a Software Engineer (Java, Maven, Eclipse RCP, ...) to reinforce our software team! Discover the interesting domains of access network technologies (TCP/IP, DOCSIS, Wi-Fi) and network traffic generation/analyzing from a developer's perspective!
Company website: https://www.excentis.com/
Product website: https://www.excentis.com/products/byteblower/
GUI showcase videos: https://www.youtube.com/user/ByteBlower
Job offering (in Dutch): https://www.excentis.com/about-us/jobs/java-software-development-engineers-niveau-master
Contact: jobs _at_ excentis _dot_ com
Kind regards,
Tim De Backer
Software Engineer
Excentis

Sadly, the job description is only available in Dutch.
I don't know whether being a Dutch speaker is really a prerequisite (all documentation and external communication is done in English anyway). The profile mentions it, but making a good impression may be well enough!
Do note that we are looking for someone to come work at our Ghent office.
Quick-and-dirty translation of the job offering (general info available on the site):
Quote:
You're responsible for designing and implementing software solutions for the telecommunications sector. Windows, Apple, Linux platforms as well as web-based technologies are used. You're (initial) focus will be on developing the user interface of the Java clients that control our network testing solutions and on the test report generation. You'll get in touch with databases such as MySQL and HSQLDB. You'll work with version control (subversion), build systems (Maven), continuous integration (Jenkins) and unit testing systems.
Depending on the task at hand, you'll work with two our more people in a team. You'll be part of the software design process from the very start, you'll work with the project lead on things like planning and report your progress regularly.
During your initial training you'll learn on (and get affinity with) state of the art telecommunications and networking technologies.
Profile
* You have a Master's degree in Computer Science Engineering or similar.
* Job experience is a plus.
* You're a problem solver with a critical mindset.
* You have a strong interest in both software development and networking technologies.
* You master at least one programming language, preferably Java.
* Affinity with the Eclipse Rich Client Platform is a plus.
* You are familiar with database technology.
* You speak English and Dutch fluently.
* You can provide technical support to customers
* You're a team player.
Offer
* Excentis offers an interesting job in a dynamic and pleasant working environment that will bring you in touch with innovative technologies and will allow you to work in an international context.
* Competitive salary with extra's such as pension plan, (additional) health care insurance, internet, etc..
* Excentis offers internal and external trainings in both the problem domain and software engineering competences and technologies.

Mediatek looking for - Software Engineer -Java/Eclipse/RCP

DESCRIPTION
Looking for a strong software engineer with a background in Eclipse RCP plugin development, and strong programming skills in Java to work on toolchain debugger development and processor simulator integration for embedded DSP processors. Role will include development, testing and verification of software development tools on both Linux and Windows environments. Role will also present the opportunity to define and implement processor-specific toolkit features.
QUALIFICATIONS
1. BS/MS in relevant degree area.
2. Experienced in Eclipse RCP plugin development with Java and SWT is must.
3. Experience of cross-platform development and debugging with Eclipse on Linux and Windows is desired
4. Experience in C++ is plus.
EDUCATION REQUIREMENTS
B.S. in Computer Science or related field
EXPERIENCE
More than 2 Years Work Expe.
Please submit resume at careers section in Mediatek US website or email to [email protected]

Depending on individual experience and capability, it would not be too hard to figure out the market value of software engineer with some googling.

DSPCon is looking for a Software Engineer/LabVIEW-based application development

E-mail resume to [email protected] Please Visit Our Web-Site for full job description. www.dspcon.com
DSPCon specializes in the development of real-time data acquisition and analysis systems for use in a variety of Digital Signal Processing intensive applications such as shock and vibration analysis, rotating machinery analysis, and digital recorder applications. DSPCon provides high-end system solutions into both the Commercial and Defense markets.
With a variety of hardware and software products in our line, DSPCon has the ability to provide COTS-intensive, cost-effective solutions for any digital signal processing project.
Consistently chosen by the US Government and Fortune 500 companies, DSPCon has hundreds of systems in operation today ranging from high-channel, high-bandwidth data acquisition and analysis systems for wind tunnel applications, to infrared processing, analysis and archiving systems for defense related applications.
DSPCon is looking for a Software Engineer with a successful track record in design and development of new products and bringing them to market in a 9- to 12-month time scale.

Hi,
There is a section for companies looking for LV developers, here:
http://forums.ni.com/ni/board?board.id=JobPost
You should mention where the job is offered and if it is something that can be developped off-site (for consultants like myself, tbob, Ben and a number of LV developers).
Hope you find the right candidate.
Ray

Need Sr. LabVIEW Development/Controls Engineer in Kyle (Austin), Tx

Xtreme Power Solutions is
currently looking for Sr. LabVIEW Development/Controls Engineer to support the
Battery Energy Storage System Division.
This position will be based in Kyle, TX.
Xtreme Power Solutions delivers
integrated smart power management solutions from 500kW to 100MW. Proprietary
solid-state power management and integrated storage enables efficient and
available power for an environmentally sound 21st century electricity industry.
www.xtremepower.com
Primary Function:
The Sr. LabVIEW Development/Controls Engineer will lead a
small team of LabVIEW developers that is responsible for developing and
maintaining the company’s energy storage SCADA systems. There is Core software that is common to all
customers and customer specific software requirements as well. He designs control systems for XP
products. The position is initially for
a Team Lead, but may develop into a manager role.
Primary Duties:
Lead of
team of four to six LabVIEW or software developers
Work with software
team and project engineers to establish standards and procedures
Writes
LabVIEW Code
Unit Tests
and debugs code
Designs,
validates and maintains control systems.
Mentors
others
Ability to
travel up to 20% in support of
remote sites and/or customer installations
Qualifications
Bachelor of Science in Electrical Engineering or
Computer Science.
National Instruments Certified LabVIEW Architect
(CLA) or equivalent experience
10+ years of experience developing automated
test, measurement, data acquisition, and control systems.
5+ years
of designing, developing, implementing, and debugging LabVIEW and LabVIEW RT
software.
Technical requirements - Hardware
Broad knowledge of instrumentation and data
acquisition technologies including PXI, NI Data Acquisition, LabVIEW Real Time,
NI FPGA, and signal conditioning.
Strong hands-on hardware troubleshooting and
debugging skills.
Technical requirements – Software
Experience using Source Code Control Systems
like Subversion (SVN) and TortoiseSVN.
Familiar with software communication protocols
such at TCP/IP, UDP, and modbus.
Familiar
with all current LabVIEW application architectures.
Experience
connecting LabVIEW to third-party database systems such as MySQL.
Strong
background in architecture design and development.
Good communication
skills, both written and verbal.
Experience creating documentation for large
scale LabVIEW projects spanning VI descriptions to system diagrams.
Experience writing software requirement
specifications.
Excellent people skills, must be a leader.
Previous start-up experience is a plus
Must be a
U.S. Citizen or a Permanent resident.
Please
email resumes to [email protected]. Thank you for your continued interest in
Xtreme Power Solutions, we look forward to being in touch with you.

Sir,
I am an instrumentation and control Engineer with 3+ years
experience.I am worked area is Process and Plant Design,Automobile
testing Machine and test rig Design,Special purpose machine Design.I
have knowledge in program developer of DCS,PLC,HMI,SCADA,LABVIEW as well
as trouble shoot.I am very interested in this job.
Thank you,
Shanmugam.J
+91 984042082

Mid-Level Integration/Software Engineer Position

Mid-Level Integration/Software Engineer Position
We have an immediate need for innovative, results-oriented people that desire a challenging, fast-paced environment in which to apply their skills. The ideal candidate is highly motivated and possesses a professional attitude and an exceptional work ethic. He or she must also be able to perform with minimal supervision and deliver solutions to our customers on schedule and within budget.
Company: Mink Hollow Systems, Inc.
Location: Ashton, MD 20861
Experience: 2+ Years
Status: Full-Time, Exempt Employee
Salary Range: Commensurate with Experience
Start Date: September, 2009
Relocation: Negotiable
Responsibilities
Develop software with National Instruments LabVIEW using industry best practices to reduce client risk
Work independently and on group projects in a professional office environment
Requirements
2+ years of LabVIEW Programming Experience Required (Developer CertificationPreferred)
Experience with National Instruments hardware including FieldPoint, PXI, and PC-based devices
Experience with NI cRIO, RT, and/or FPGA systems or similar Preferred
Proven ability to work independently as well as a member of a team in a fast-paced environment and contribute to multiple projects
Ability to rapidly absorb new concepts and apply them effectively
Local and short-term travel required (Approximately 20% - 30% annually)
US Citizenship or Permanent US Residency authorized to work in this country for any employer (Because of the immediacy of this position, we are unable to sponsor people at this time.)
Preference is given to candidates with the following:
Certification: LabVIEW Certified Developer
Certification: Professional Instructor
Experience with LabVIEW DSC
Experience with LabVIEW Embedded
Experience with National Instruments TestStand
Experience with C/C++/.NET
Experience with Macintosh Operating Systems
AcademicQualifications
Minimum BS Engineering (BSChe, BSEE, BSME, or related discipline), Computer Science, or Applied Physics
Responses
Please forward resume and salary requirements to [email protected]
Principals only, no 3rd party resumes, agencies, or contractors accepted
CompanyDescription
Mink Hollow Systems, Inc. is a small, dynamic engineering firm providing systems integration services to a diverse set of regional and national clients. Our broad range of government, military and industrial contracts allow us to provide our employees with challenging opportunities ranging from R&D applications, control systems, production test systems, Real-time and embedded systems, and more.
As a National Instruments Alliance Partner, we offer exciting professional challenges using LabVIEW and National Instruments products to provide solutionsin a wide variety of application areas. We offer an excellent salary/benefit package including medical and dental coverage, pension and profit sharing plans, as well as paid leave and holidays.

Hi,
I'm chaitanya. i have 1+yrs exp working in labview and also good c skills.i'm certified as associate developer also have exp working on national instruments devices for data acqusition projects,automated testing eqiupments.i'm right now in india and willing to relocate. if you people are interested please mail me at:[email protected]
thanks
chaitanya

Junior/Entry Level Integration/Software Engineer Position

Junior/Entry Level Integration/Software Engineer Position
We have an immediate need for innovative, results-oriented people that desire a challenging, fast-paced environment in which to apply their skills. The ideal candidate is highly motivated and possesses a professional attitude and an exceptional work ethic. He or she must also be able to perform with minimal supervision and deliver solutions to our customers on schedule and within budget.
Company: Mink Hollow Systems, Inc.
Location: Ashton, MD 20861
Experience: Minimum 1 Year
Status: Full-time, Exempt Employee
Salary Range: Commensurate with Experience
Start Date: September, 2009
Relocation: Negotiable
Responsibilities
Assist Engineering staff with software development using National Instruments LabVIEW
Interface with clients to provide programming services and support
Requirements
Minimum 1 year LabVIEW Programming Experience Required
Experience in the design, implementation, and documentation of automated test, acquisition, and control systems
Proven ability to work independently as well as a member of a team
Effective interpersonal and problem-solving skills
Outstanding verbal and written communications/presentation skills
Ability to work independently in a fast paced environment and contribute to multiple projects
Ability to rapidly absorb new concepts and apply them effectively
Local and Short term travel required (Approximately 20% - 30% annually)
US Citizenship or Permanent US Residency authorized to work in this country for any employer (Because of the immediacy of this position, we are unable to sponsor people at this time.)
Preference is given to candidates with the following:
Certification: LabVIEW Associate Developer (or better)
Academic Qualifications
Minimum BS Engineering (BSChe, BSEE, BSME, or related discipline), Computer Science, orApplied Physics
PersonalQualifications
Interest in dynamic work environment with project variety
Ability to take on broad responsibilities and technical challenges
Goal-oriented, self-starting, and highly motivated
Proven ability to multi-task and follow-through on complex assignments
Able to meet objectives within budget and on schedule
Responses
Please forward resume and salary requirements to [email protected]
Principals only, no 3rd party resumes, agencies, or contractors accepted
CompanyDescription
Mink Hollow Systems, Inc. is a small, dynamic engineering firm providing systems integration services to a diverse set of regional and national clients. Our broad range of government, military and industrial contracts allow us to provide our employees with challenging opportunities ranging from R&D applications, control systems, production test systems, Real-time and embedded systems, and more.
As a National Instruments Alliance Partner, we offer exciting professional challenges using LabVIEW and National Instruments products to provide solutions in a wide variety of application areas. We offer an excellent salary/benefit package including medical and dental coverage, pension and profit sharing plans, as well as paid leave and holidays.

Hi,
I'm chaitanya. i have 1+yrs exp working in labview and also good c skills.i'm certified as associate developer also have exp working on national instruments devices for data acqusition projects,automated testing eqiupments.i'm right now in india and willing to relocate. if you people are interested please mail me at:[email protected]
thanks
chaitanya

Looking for a LabVIEW developer / Test Engineer in Atlanta

Averna at a glance
Averna delivers industry-leading test solutions and services for communications and electronics device makers worldwide, accelerating product development, quality and innovation:
Dynamic: The Averna team thrives on challenges and change, consistently making the prestigious Deloitte Technology Fast 50 list and winning Best in Test and other awards.
Young: The majority of our 300 employees are under 35 years old, and our high-achieving CEO was named to Canada’s Top 40 Under 40.
International: We have offices in Canada, the United States, Mexico, Japan and Hungary, with headquarters in Montreal.
Innovative: We were recently recognized as a Canadian Innovation Leader by the National Research Council Canada (NRC).
Instrumental: Our technology, expertise and drive help our global customers produce market-leading high-tech products in the telecom, transportation, electronics and multimedia sectors.
The challenge of the LabVIEW developer / Test Engineer
As part of the Engineering team, you will be involved in the development and integration of various software programs for validation systems. These systems are renowned for providing fast data throughput and extreme data integrity, while accelerating design cycles and reducing prototyping costs. The Engineering team develops a range of custom data acquisition systems to help our customers obtain accurate measurements and results.
Requirements:
Bachelors degree or college diploma in electrical engineering, software engineering or physics, Masters degree (asset);
3 to 5 years experience in software development with LabVIEW (preferably CLD);
Knowledge of NI TestStand is an asset (Preferably CTD);
Knowledge of video or RF test engineering
Knowledge of FPGA design (either VHDL or LabVIEW FPGA)
Available to travel regularly;
Professionalism, strong communication skills and interpersonal skills;
Team-player, autonomous, self-starter;
Please send your resume to [email protected] and mention the title of the position.

Is this position still opened?

Software Engineer, Austin, TX

NovaCentrix is looking for a skilled LabVIEW Software Engineer for full time employment. NovaCentrix is based in Austin, Texas, and enables advanced products in solar and printed electronics markets through their advanced photonic curing tools and conductive inks.
Responsibilities:
Design and develop LabVIEW applications related to user interface, data acquisition, and instrument control
Design and develop LabVIEW based automated test systems
Support global customer site installation and maintenance
Requirements:
Degree in Electrical / Computer / Mechanical Engineering or equivalent
2+ years programming in LabVIEW, preferably a Certified LabVIEW Developer
Experience in UI design, data acquisition, instrument control, and object oriented programming
Strong interpersonal and communications skills
Please email resume to [email protected]

Hello Ere,
Can you send me your contact email to send resume

Software Engineer opening in Boulder, Colorado, USA

Introduction to Company:
PV Measurements, Inc. has been designing and building analytical equipment for the worldwide solar energy industry since 1999. We offer competitive pay, advancement potential, medical insurance benefits, and the opportunity to work in an entrepreneurial environment in a rapidly growing industry.
Summary of Position:
This experienced, inquisitive, and self-motivated software engineer will be charged with the creation, maintenance, and evolution of data acquisition and control software for the company’s precision solar cell instrumentation products. This role requires intimate familiarity with LabVIEW™ graphical programming language with emphasis in data acquisition and orientation toward user experience. This position reports to the Director of Engineering.
Duties and Responsibilities:
Rapidly develop familiarity with existing LabVIEW™-based software modules such that existing products can be supported, maintained and evolved
Add customized features to standard product software in conjunction with customer requests
Write novel code in conjunction with new and existing hardware product offerings
Work with manufacturing personnel to ensure proper production process for software bound for customers
Work with documentation personnel to ensure accurate depiction of software capabilities and usage in internal and external documentation
Work with management to identify and prioritize software engineering projects
Required Qualifications:
2-5 years' experience and expertise in LabVIEW™ graphical programming language
Experience and knowledge of data acquisition best practices
Appreciation for, and design orientation toward, optimal user experience
Ability to communicate clearly with engineers and customers
Experience with and knowledge of software revision control best practices
Excellent organizational skills
Desired Qualifications:
Prior experience in hardware-based technology and/or manufacturing business
Experience integrating LabVIEW™-created software with external databases and the internet
Experience interfacing LabVIEW ™-created software with factory automation equipment
Knowledge of GUI programming languages other than LabVIEW™
Understanding of electrical signals and circuitry for signal conditioning
Information systems management experience
Educational Requirements:
Engineering degree in EE or CS or equivalent relevant work experience
Compensation:
Commensurate with experience
Interested candidates should email a statement of interest and résumé to jobs3 {AT} pvmeasurements ^dot^ com and include “Software Engineer” in the subject line

I am a control systems engineer with 16 years of experience designing and building large systems using LabVIEW in Albuquerque NM and working currently for TEAM Technologies Inc. almost 15 years.
I hold a Master Degree in Space Power Systems graduated from Moscow Aerospace University.
I invented and implemented a message-driven and scripting controlled LabVIEW architecture which I presented couple times at NIWeeks, published in LTR, and local NI and ALVIN seminars. This architecture I was successfully used to develop projects for SNL (National Lab), WSTF (NASA), EMCORE, and etc. firms and organizations.
My expertise areas are: 1) Mechanical Engineering; 2) High Temperature Energy Converters; 3) Thermodynamics 4) Digital and Analog Electronics; 5) Programming: LabVIEW, C, embedded microprocessors (ARM, Cortex); Distributed hard real-time control with PXI and Compact RIO instrumentation.
I have published 45 scientific papers and have six patents.
I am NOT a certified NI LabVIEW programmer, because I believe that scientists and engineers has to have Degree Diploma only.
LabVIEW is just a programming tool nothing more.
Regards,
Youri Djachiachvili
Aerospace Engineer.

C/C++/Java/LabView/SCADA Software Engineer, Hertfordshire, England, UK, £20-30k+

Similar Messages

Maybe you are looking for