C:/ disk is not showing on my computer window server 2003 standard edition (UCCX7.0)

Hi all,
Today I was checking the server and I find that C: disk is not showing Under "My computer" whereas it is showing under disk management and its status is okay. Please tell what the problem and how I resolve that issue? Because server is in production and we can't afford sudden downtime.
Regards
Ali Raza

Hi Walter,
OS image is 2003.1.5.
Regards
Ali Raza

Similar Messages

  • Microsoft server 2003 standard edition r2 x64 bit product shows invalid product.

    Dear all,
    I am facing a problem, to register  Microsoft server 2003 standard edition r2 x64 bit. My product key is ok. But on time of registration this product it will not accept my key or on Microsoft product registration support it's show its a invalid product. 
    Please help me to register this product. 
    Thanks
    Puneet

    You need to contact Microsoft's Activation Center and talk to someone.  The phone numbers for reaching them are on the activation page you go through when trying to activate manually.  Apparently the activation code you have is not 'ok', and only
    Microsoft can help you with that.
    A second thought is where did you get the media?  If not from a reputable Microsoft source, then it could be the copy you have is a pirated copy with a key that Microsoft has deactivated.  Again, only Microsoft can tell you.
    .:|:.:|:. tim

  • ORA-12516: TNS:listener could not find ... on Windows Server 2003

    We are getting "ORA-12516: TNS:listener could not find available handler" while testing asp.net web application.
    We have following configuration:
    - A 10g database server on Windows Server 2000
    - A Web Server running IIS6 on Windows Server 2003
    - ODP.Net for 10g client installed on Web Server
    we are testing our web app with 75 concurrent users, as far as I can tell we are closing connections in our app and open connection only while retrieving and saving records.
    I saw this error very first time when we upgraded our web server to use 10g client. Before that we were using Oracle 9 client and have tested this app with 100 concurrent users without any error.
    Does anyone can help or point a resource that can help to resolve this error?
    Thanks.

    Hi,
    You'll likely want to take that up with the networking folks as the error seems to be coming from the Listener.
    How many connections does each instance of your app make? If you make the same number of connections via sqlplus for example rather than ODP, do you see the same results? I know creating 60 or sqlplus sessions may not be fun, but it will help determine if this issue is truly somehow related to ODP. It doesnt seem likely it would be, and if ODP can be removed from the picture, it will be that much easier to troubleshoot.
    One thing I'd suggest though, is to make sure your app is cleaning up after itself properly to as to use resources efficiently. If you have access to My Oracle Support, see the following note:
    Note 730678.1 Oracle Data Provider for .Net Best Practices
    Hope it helps,
    Greg

  • Ipad not showing in My Computer - Windows 7

    I am trying to import images from my ipad to my computer. I would prefer to copy the pictures to a folder in My Pictures from My Computer. The device is connected on iTunes but is not shown in my computer. The device is in Devices and Printers under 'Unspecified' as 'Apple Mobile Device USB Driver

    Hello ojdavies,
    Thank you for the details of the issue you are experiencing with your iPad being recognized as a camera on your computer.  I recommend following the steps in the article below for the issue you described:
    iOS: Unable to import photos to computer
    http://support.apple.com/kb/ts3195
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Macs will not show up on DNS Windows Server 2008 R2

    In our office, we have a Windows Server Infrastructure with several Macs (Imacs, mac pros, macbook airs etc).
    Active Directory and DNS is running off a Windows Server 2008 R2 Server, with DHCP on a Cisco Router.
    DHCP is configured to direct all DNS entries to the Windows DNS Server.
    The problem that I'm having is that, while all windows machines show up on the Windows DNS Server, None of the Macs are registered. Macs are able to utilize the DNS Server correctly, but will not register on the DNS Listings.
    Because I cannot access or ping Macs via their hostname, I cannot tell our third party backup software to point to a particular machine. Our workstations are all DHCP enabled, and since assigning a static ip to all the Macs here is not an option, I need to get this working, so that I can get our macs backing up.
    I've followed a few similar articles, but they appear to be for older 2003 servers, which the 2008 R2 servers do not have those options. I do not want to join the Macs onto the windows domain, I merely want to get them registered on our DNS server.
    The mac operating systems vary between Snow Leopard to Mountain Lion
    https://discussions.apple.com/thread/1421684?start=0&tstart=0 <--- Article I was following
    Thanks,
    Rboelens

    I'm pretty sure that the DNS registration stuff is part of the Active Directory plug-in on OS X.  I'd recommend you give it a try.
    GPOs are not enforced on the Macs if they're bound to Active Directory, _unless_ you've extended the Active Directory schema (which is a lot of work).  The main benefits to joining Macs to AD ar:
    * Centralized password management and policies (as you've defined in AD).
    * Single sign-on to various kerberized resources (i.e. Windows share points and internal web pages if you're using IIS and you use Kerberos to secure them, rather than NTLM).
    Here's an Apple white paper which may help.  I would recommend you read this carefully and then decide whether or not you want to bind the Macs to AD.  I'd also recommend you test with a bound Mac to see if resolves this "host name in DNS" issue... I suspect it will.
    http://training.apple.com/pdf/wp_integrating_active_directory_ml.pdf

  • Two instances can not simlutaneouly work together on Windows Server 2003 R2

    Hi Gurus,
    I installed Netweaver on a server which is already having ECC 6.0 which we are using on insctance 10 but i can work only one at a time if one is Up and running the other one should be down this is what am facing.
    I have the developer trace log file. Pleaase see below and help me with this.Log below is for Netweaver that i installed and if ECC is UP it throws this in trace.
    Total Physical Memory of server = 32 GB
    Available Physical Memory of server = 11 GB
    In task Manager it shows PF usage of 73 GB and total paging file size set for all drives is 44.98 GB.
    LOG
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      20
    sid        NWC
    systemid   562 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    144
    intno      20050900
    make:      multithreaded, Unicode, 64 bit, optimized
    pid        13772
    Wed Mar 04 16:06:10 2009
    kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
    length of sys_adm_ext is 576 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (20 13772) [dpxxdisp.c   1243]
         shared lib "dw_xml.dll" version 144 successfully loaded
         shared lib "dw_xtc.dll" version 144 successfully loaded
         shared lib "dw_stl.dll" version 144 successfully loaded
         shared lib "dw_gui.dll" version 144 successfully loaded
         shared lib "dw_mdm.dll" version 144 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3920
    Wed Mar 04 16:06:15 2009
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5371]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >specsaptm_NWC_20                        <
    DpShMCreate: sizeof(wp_adm)          25168     (1480)
    DpShMCreate: sizeof(tm_adm)          5652128     (28120)
    DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
    DpShMCreate: sizeof(comm_adm)          552080     (1088)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (104)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1864)
    DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000CD60050, size: 6348592)
    DpShMCreate: allocated sys_adm at 000000000CD60050
    DpShMCreate: allocated wp_adm at 000000000CD62150
    DpShMCreate: allocated tm_adm_list at 000000000CD683A0
    DpShMCreate: allocated tm_adm at 000000000CD68400
    DpShMCreate: allocated wp_ca_adm at 000000000D2CC2A0
    DpShMCreate: allocated appc_ca_adm at 000000000D2D2060
    DpShMCreate: allocated comm_adm at 000000000D2D3FA0
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 000000000D35AC30
    DpShMCreate: allocated gw_adm at 000000000D35ACB0
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 000000000D35ACE0
    DpShMCreate: allocated wall_adm at 000000000D35ACF0
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    ThTaskStatus: rdisp/reset_online_during_debug 0
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 4096 kByte.
    Using implementation view
    <EsNT> Using memory model view.
    <EsNT> Memory Reset disabled as NT default
    ERROR => <EsNT> CreateFileMapping name=ES_SEG_20_001 error=1455 [esnti.c      1184]
    ERROR => <EsNT> paging file too small for 2044 MB mapfile [esnti.c      1186]
    Memory diagnostic                                 *
    Systeminformation
    Processor-Typ             : Processor-Count           : 16
    Operating System          : NT 5.2, Build 3790
    Service Pack              : Service Pack 1
    NT Pagefile Informations
    Config. minimum size      : 47185920 K
    Config. maximum size      : 47185920 K
    Avail.  maximum size      : 47185920 K
    Num
    Pagefile
    Min.Size
    Max.Size
    Avail.Max
    Curr.Size
    1
    c:\pagefile.sys
    20971520 K
    20971520 K
    20971520 K
    20955136 K
    2
    o:\pagefile.sys
    15728640 K
    15728640 K
    15728640 K
    15728640 K
    3
    s:\pagefile.sys
    10485760 K
    10485760 K
    10485760 K
    10485760 K
    NT Task Manager Informations
    Total Handles             :        0
    Total Threads             :        0
    Total Processes           : 2027253931
    Commit Charge Total       :        0 K
    Commit Charge Limit       : 2143554319 K
    Commit Charge Peak        :     2047 K
    Phys.Memory Total         : 131657184 K
    Phys.Memory Available     :        0 K
    File Cache                : 2143594271 K
    Kernel Memory Total       :     2047 K
    Kernel Memory Paged       :   393225 K
    Kernel Memory Nonpaged    :     3851 K
    Memory usage of current process
    Total virt.address space  : 0000008589934464 K
    Avail.virt.address space  : 0000008589043192 K
    Private Pages             :        0 K
    Total heap size           :    26229 K
    Virtual memory regions    :        0 K
    Uncommitted heap memory   :    16392 K
    Allocated heap memory     :     8196 K
    Moveable heap memory      :     2202 K
    DDE shared heap memory    :        0 K
    Memory usage of all processes
    PID
    Image
    Instance
    Work.Set
    WS Peak
    Priv.Pages
    PP Peak
    Pg Fault
    17072
    sapstartsrv.exe
    21452 K
    21848 K
    23768 K
    23888 K
    85
    11308
    msg_server.EXE
    [MS] NWC_21
    10624 K
    10624 K
    13984 K
    13984 K
    2
    11712
    enserver.EXE
    [**] NWC_21
    16476 K
    16476 K
    58040 K
    58040 K
    4
    7116
    msg_server.EXE
    [MS] NWC_20
    10960 K
    10960 K
    14432 K
    14436 K
    2
    13772
    disp+work.EXE
    43272 K
    43648 K
    75636 K
    82264 K
    11
    17560
    igswd.EXE
    [**] NWC_20
    4108 K
    4408 K
    3208 K
    3572 K
    1
    7072
    igsmux.exe
    14308 K
    14308 K
    18036 K
    18072 K
    3
    16988
    igspw.exe
    3544 K
    3544 K
    4012 K
    4012 K
    0
    5504
    igspw.exe
    3544 K
    3544 K
    4012 K
    4012 K
    0
    Sum
    128288 K
    215128 K
    Error 11 while initializing OS dependent part.
    ERROR => DpEmInit: EmInit (1) [dpxxdisp.c   9634]
    ERROR => DpMemInit: DpEmInit (-1) [dpxxdisp.c   9561]
    DP_FATAL_ERROR => DpSapEnvInit: DpMemInit
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=1
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Mar 04 16:06:26 2009
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)               Wed Mar 04 10:36:26 2009
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program          Cl  User         Action                    Table
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    0 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    1 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    2 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    3 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    4 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    5 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    6 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    7 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    8 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    9 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    10 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    11 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    12 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    13 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    14 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    15 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    16 ?         -1 Free          no      0   0        0                                                                         
    Dispatcher Queue Statistics               Wed Mar 04 10:36:26 2009
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    0
    0
    2000
    0
    0
    --------++++--
    +
    DIA
    0
    0
    2000
    0
    0
    --------++++--
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    2000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++--
    +
    max_rq_id          0
    wake_evt_udp_now     0
    wake events           total     0,  udp     0 (  0%),  shm     0 (  0%)
    since last update     total     0,  udp     0 (  0%),  shm     0 (  0%)
    Dump of tm_adm structure:               Wed Mar 04 10:36:26 2009
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks               Wed Mar 04 10:36:26 2009
    =============================
    Slots: 300, Used: 0, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=1
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL

    If you installed the system with default memory parameters both instances will try to allocate 1/2 of the virtual memory on startup.
    I suggest you decrease the parameter
    es/initial_size_MB
    to a value that both instances will fit into physical memory (so e. g. 4000). Then try to start both instances.
    Markus

  • Indesign Server CS4 service is not starting on Windows Server 2003 64bit

    Hello guys,
    I am not able to start Indesign Server CS4 service on windows Server 2003 SP2 64bit .
    I have successfuly configured the service with InDesignServerService.msc, set the port to 18555. InDesignServerWinService the Log On option is set to "This Account". Also tried using different accounts!
    When starting the indesign service from windows Service control panel I get this error:
    Could not start the InDesignServerService x64 service on Local Computer.
    Error 1053: The service did not respond to the start or control request in a timely fashion.
    Error log from windows Event viewer:
    Error
    Timeout (30000 milliseconds) waiting for the InDesignServerService x64 service to connect.
    Indesign server application works if launching from command line with the specified port 18555.
    If trying to lauch IndesignServerService.exe from command line, there is a delay and finally nothing happens.
    I have also tried launching 32bit indesign server service and the same error comes.
    Would be grateful for your thoughts!
    Message was edited by: Andrewdev
    Server specs:
    Windows Server 2003
    Standard x64 Edition
    Service Pack 2
    Intel Xeon CPU 3.00Ghz
    9.76 GB of Ram
    Server is running virtualy on Xen hypervisor, there is no antivirus and windows firewall is disabled.

    Hi Chandi,
          If Microsoft fix is not working or it is too old to apply then go for manual process i.e.;
          In the Microsoft KB article follow this :-
         Services that use the local system account to log on to a Windows Server 2003-based computer start if the Allow service to interact with desktop
         option is turned on. To turn this option on, follow these steps:
    In the Services tool, click the service that you want to start, and then click Properties.
    Right-click the Log On tab, and then click to select the Allow service to interact with desktop check box.
    Click OK to exit the Properties dialog box.
       This will solve your problem.
       Thanks,
       Akansh Upadhyaya,
       System Engineer,
       (Windows + Unix.)

  • Satellite Pro L300 - CD/DVD does not show on my computer

    Hello ! This is probably a silly / easy question but I am very new in this and..... my CD/DVD unit does not work.
    It does not show on "my computer" and when I insert a disk, nothing happens (except for a buzzing noise but then nothing)....
    Can someone kindly help me?
    As the helpline does not answer on Saturdays...
    Many thanks !

    Hi
    Try this;
    Access the device manager and remove the CD/DVD drive from the device manager list.
    Then access the registry and remove the Upperfilters and Lowerfilters values completely from the following registry key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
    Reboot the notebook and check it again.

  • When insert my lexar USB flash drive I get the message that the disk was not readable by this computer.  It has worked previous to this and I do not want to lose the data by reformatting the drive.  How can I reformat this drive and not lose my data?

    When insert my lexar USB flash drive I get the message that the disk was not readable by this computer.  It has worked previous to this and I do not want to lose the data by reformatting the drive.  How can I reformat this drive and not lose my data?

    You can't reformat it and not wipe everything on it.
    Have you tried a different USB port?
    Only other option, back it up on a different computer.

  • External hard drive says the disk is not readable by this computer. Help!

    My son disconnected my external hard drive while I was copying files from my macbook to the external hard drive. Now it says the disk is not readable by this computer. Help! Is there anything I can do??

    Launch disk utility and try to repair the disk, http://support.apple.com/kb/HT1782?viewlocale=en_US&locale=en_US

  • "This disk is not recognized by this computer"

    I have a FireWire LaCie external disk, that suddenly stopped working.
    Did some copying of files and then I discovered some folder were missing.
    Then I restarted and got the message "This disk is not recognized by this computer. I did choose Igonre and when I run Disk Utilty I get this message:
    Verify and Repair disk “disk1s9”
    Checking HFS Plus volume.
    Catalog file entry not found for extent
    Volume check failed.
    Error: The underlying task reported failure on exit
    1 HFS volume checked
    1 volume could not be repaired because of an error
    What shall I do? I'm panicking, since there are life-important (almost) files on the disk.
    I have Data Rescue II - do I dare to run the program, or shall I take the disk to a company??

    Bought the Data Rescue II, have restored most of the files. I think so, at lest. Many orphans, but at least they do have their names intact, and I have a pretty good idea where to put them. I only hope that the PSD files are intact too, all my video assets are on Beta and can be re-captured if needed.
    Tanks for your tip!
    It's the SECOND failure today - first I replaced an existing folder with an empty one and copied another 40 GB of files to the disk. Not much to rescue there...
    And then this happens. Not having a good week so far.

  • Ipod touch not showing up in 'computer'

    My ipod 4g is not showing up in 'computer' on Windows 7. It shows up in iTunes, but not in computer. I tried updating itunes and ipod, still no luck. I need it for my pictures, and iCloud is too complicated to use easily.
    Please help!!

    We have 16 pupil iPads at our school supervised by a Mac Air and we can't see the photos on any of them on the Mac, a Windows 7 or an XP machine. The unsupervised machines used by the teachers are fine. Is this a common problem? If so, is there any way around it not involving PhotoStream?

  • My Startup Disk can not show in Finder.

    My Startup Disk can not show in Finder.but it can be used in OSX normally.
    So can I put it back to Finder?

    If the startup disk is for Mac OS 9, neither MacBook nor PowerMac G5 can boot into 9. Only the PowerMac G5 can use Mac OS 9 in Apple menu -> System Preferences -> Classic.
    Please be more detailed what sort of Startup Disk you are talking about, which operating system, and which machine this is a problem with.

  • My website shows an extra box image on PC's that is not showing on my computer in iWeb or online.

    My website shows an extra box image on PC's that is not showing on my computer in iWeb or online. I know for sure that the box is not there in iWeb. You will see it on the homepage of www.gageformen.com of you're on a PC. Any clue how I can get rid of it? Thanks!

    Post a screenshot of the page on the PC so we can see what you're referring to?  What type of box image is it?
    By the way, I noticed that the only text in your entire site that is not an image file is that on the page RESPONSIBLE STYLE.  That's the only text in your site that a search engine can use in it's ranking and listing.  That could be limiting as to what the search engines have to use from your site.
    OT

  • Dvd/cd rom not showing up on computer.

    dvd/cd rom not showing up on computer.  Where do I find the driver for the dvd/cd?
    Have a pavilion dv6915nr with windows vista. Somehow the dvd/cd player is not showing up and will not play anything.
    Any suggestions on what I can do.

    Is this because i am an idiot and need a DVD drive?
    Have you got a DVD drive?
    Have you been able to playback DVDs before? If not, then you may very well need a DVD drive... not just a CD drive.
    You'll be able to tell what you have by looking in 'My Computer' when there are no discs in the drives. The drives should show up as things like: 'CD-ROM Drive(D:)' or 'CD/DVD Drive(D:)'. If none of the drives have DVD in the title, you may just need a DVD drive.
    If you have any luck getting them to show up, take a look at this thread for help on ripping DVDs to iPod.
    { If this is helpful, please click the '+' on my post. Thanks! }

Maybe you are looking for

  • How do you convert channels.dvb to channels.conf

    Title says is all. How do you convert the kaffeine file channels.dvb to a channels.conf file which can be used by mplayer. The winterhill transmitter in the UK is now totally digital, since the change over I've not been able to get BBC channels prope

  • Messages stuck in "Messages Pending" column of a JMS queue.

    Hi Is there any way to retrive the messages which are stuck in "Messages Pending" column of a JMS queue. weblogic 8.1 SP5 version. Thanks

  • Displaying name of specific file name in browser address bar

    Hi, I am using RoboHelp8 and generating my file using Single Source Layouts - WebHelp (Primary Layout). When selecting a specific page via the Contents toolbar, I would like to have the address of that specific file displayed in the address bar but f

  • Mail app always opens in default inbox

    I have a 4s running 6.1.3.  Currently, when I open the mail app, it opens with the default inbox.  I would prefer to open to the mailboxes 'main' screen that shows all the accounts as opposed to an inbox.  Is this possible?  I cannot find any prompts

  • Adding User attributes in Request details

    Hi, I want to add user details like Manager Name in addition to default attributes to approval request for a user. Can you please tell me how can I do this. Thanks In Advance