C Drive Full on my Satellite U400 -15B

Hi All
I am not very clever when it comes to PC's so need a little help, I keep getting a message to warn me that my C drive is reaching capacity, even when I have not uploaded anything for a long while.
I have explored the drive and each folder therein and there is nothing evident to say why I have used 147GB of my 149GB capacity,
Its a 320GB laptop with 2 drives and the E drive is ok?
I have done the usual, deleted temp files, emptied recycle bin etc to no avail
Its a Toshiba U400-15B Satellite if that's any help
Any ideas and help anyone, it would be most appreciated

Hi
I can also recommend the CCleaner. Its freeware tool which helps you to remove the temporal stored files and helps you to clean and repair the registry very useful tool definitely..

Similar Messages

  • Slow boot on Vista Home Premium - Satellite U400-15b

    Hi,
    I have just bought Satellite U400-15b and am finding it takes a very long time for Vista to boot up, I have gone into msconfig and disabled the things that I am not using and stuff I think that is not necessary, but still having to wait ages before I can use the laptop. I have enough RAM and processor speed so I dont think the specs of the laptop are a problem
    Is there anything that can be done about this slow boot, any help would be appreciated.
    Thanks

    Hello
    In my opinion slow boot-up or slow notebook operations depends on right OS configuration. I played with this last months and I am now satisfied how Vista boots and runs on my notebook.
    I wrote about it in one another thread and if you have some time have a look under http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=134947
    Please let me know what do you think about all this.

  • Satellite U400-15B hangs on Internet and Touch media keys issue

    Hi All,
    Had two issues with my U400-15B which I am hoping to resolve.
    1) The first issue is that I have noticed that my internet occasionally seems to hang on Internet Explorer when using website's which have a couple of images e.t.c.
    It will freeze but the rest of the laptop works fine - I mean you can go into the start menu and open other programs fine. However, if you open Microsoft Word while this is happening, it will take slightly longer to load up than normal. Does anyone know what this could be or how I can resolve this?
    I am using Vista Home Premium 32 bit and the laptop has 4GB of RAM / P7350 Intel Centrino 2 - so is pretty powerful.
    2) The second issue is that when I press the 'sound' touch key, the white lights and the white bar above the touchpad become unlit. When I press this again the lights come back on but it doesn't mute the sound. Only when the the laptop is put to sleep mode and then woken up again, does the key work correctly. All others work fine. Does anyone know whats causing this?
    I have exchanged this laptop 3 times now and all of them have done issue (2) this but surely this isn't normal.
    Any help or advice to rectify these issues is very much appreciated.
    Thanks

    > but the problem of when you press the sound mute touch key still turns the white lights off and the white bar on top of the mouse off - instead of muting the sound.
    Ive got U400 too and installed Win XP. When I press the first button near the power button then I can enable and disable the LEDs.
    To be honest this is not a problem!
    You can configure the Toshiba Control buttons.
    This can be done in the Toshiba Button Support Utility. And this tool can be found in Toshiba Assist -> Optimize -> Toshiba Button Support
    There you can chose the button (button name) and can assign the certain function.
    I think the mute.exe could be fund in Toshiba folder.

  • Satellite U400-15B screen isn't bright as it used to be

    Good morning everyone
    I have had my U400-15B nearly a year now and I've noticed the screen isn't as bright as it used to be.
    The brightness level is on maximum but it just seem a little dull.
    Has anyone else noticed this or is it just the LCD panel not being very good?

    Hi
    > The brightness level is on maximum but it just seems a little dull.
    So you are saying that you have already checked the FN + F7 key combination which increases the display brightness?
    Well, maybe there is an FL inverter issue?
    The FL inverter is a small part which controls the display brightness.
    If this part starts to malfunction then you will see everything on the display like behind a thick fog.
    If this is a case then you should get in contact with an local service technician whu could replace this.
    PS; if you are running Win 7 then you should go to the Win 7 power management and should check if the Win 7 didnt set the display brightness to the lower level in order to save the battery power. The Win 7 supports an economy mode which tries to save the power

  • Satellite U400-10j - How to boot from USB flash drive?

    Hello,
    I have a Toshiba Satellite U400-10j.
    I have Ubuntu on my USB flash disk, I now want to boot from it.
    I am unable to find the option in the BIOS to boot from the Usb flash drive.
    Secondly I have noticed that the laptop also has a internal memory card reader.
    Could I load Ubuntu onto it then boot from the memory stick as well?
    Your Help will be much appreciated.
    Thank you.

    I think its not able to boot from an USB stick on this notebook.
    The best way is to use a CD. There you can boot from on this notebook and all other notebooks.
    In the Internet are a lot of CD versions of Ubuntu and other Linux systems available.
    And as Feliks said, its not able to boot from an SD card because this is not listed in the BIOS.

  • Satellite A300-15B - Windows 7 and webcam driver

    Hey
    I just have done format on my pc Satellite A300-15B from windows vista (32bit) to windows 7 (64 bit) enterprise Greek edition!! But my driver of webcam doesn't work.
    At first it worked but the last 4 days it not. :( What can I do??
    Thanks

    Hey,
    To be honest I dont understand what you mean. Do you talk about webcam or some Toshiba utilities now? Im confused
    If you want to update the webcam driver, you can download it on the Toshiba page:
    http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
    If you have more questions, please let us know!

  • Memory upgrade on Satellite A300D-15B

    Hi all,
    I am having upgrading the ram on my laptop from 4gb to 8gb. First I will post the full details of my laptop then explain the problem.
    (Original Configuration)
    Satellite A300D-15B
    Model : PSAKCE
    Bios Ver: 3.30
    AMD Turion X2 Ultra Dual-Core Mobile Processor ZM-86 (Upgraded from ZM-80)
    Genuine Windows Vista Home Premium 32bit
    4096 MB (2048 +2048) PC2-6400 DDR RAM (800MHZ)
    Right then, I installed Windows 7 32bit on it ages ago and upgraded the CPU and have never had any issues as i work with computers.
    I did some checking and found out my Motherboard supports uo to 8gb of ram and decided to buy two 4gb ram modules. I made sure I got the correct ram for my laptop.
    I upgraded the ram and it recognised it without any issue and even stated that 8gb of ram was installed under 'System'in contol panel and in the bios. As it was a 32bit OS it only utilised 3gb of the ram. I then decided to upgrade my OS to Windows 7 Ultimate 64bit and thats when the fun began.
    Basically my laptop will not boot if I have more than 4gb of ram installed (In any configuration) and get a BSOD. I have had a few different Stop Error codes but I cant seem to find a solution. Also there arent any/many options to change in the bios so Im stumped.
    I have tested the ram modules with Memtest several times without error and have also tried them in different laptops without issue. I know my laptop suppors the 8gb as I had no issues running the 32bit OS.
    All my drivers and other software are to date and work fine and have installed all windows updates to date.
    Has anyone else had this issue and is there a patch/fix available?
    Any help, ideas or suggestions are welcome and hopefully I can sort this problem out. Many thanks in advance.
    Melchius

    Hi there,
    The Ram I bought is the correct to the letter and is as follows:
    Komputerbay DDR2 PC2-6400 @ 800Mhz - 2 x4gb modules.
    It has exactly the same Cas latency and timing settings aswell.
    You mentioned that it booted fine in 32bit as it didnt address the full 8gb but now on the 64bit OS I have 1 x 4gb module installed and it is recognised without any issues,.
    If the ram wasnt compatible in any way then I should be getting some errors or something to indicate a problem.
    It also wouldnt boot/run properly with just 1 of the 4gb modules installed on either 32/64bit OS's, which isnt the case at all. I am certain that the ram itself isnt the issue.
    I also tried installing 1 x 2gb and 1 x 4gb module for a total of 6gb and I managed to get windows to load (once) but it then stopped responding. Im not very keen on spending loads of money on another 8gb of ram from Kingston or Crucial if the same thing is going to happen, which I fully expect it will.
    Thanks for the suggestions though, any other ideas?
    Melchius
    Also worth mentioning that the ram that came with the laptop wasnt even Toshiba brand, it is Samsung ram so maybe they should make a list of all the compatible makes for their laptops or maybe not lock their bios's to the point that the end user is so limited.
    +Message was edited by: Melchius+

  • Battery issue on Satellite U400

    I bought my Dad a Satellite U400 10J laptop for his birthday just under 2 years ago. Being over 60 and not too enthusiatic about using a laptop, he left the unit in his cupboard for close to a year before turning on. The first problem materialsed with the laptop not turning on with the "Battery not recognised" error. Subsequent updating of the BIOS got the laptop to startup. However, despite now charging (or appearing to charge) the battery only retains about 10 minutes of charge. This has progressively gotten worse to the point that the only way to use the laptop is to keep it constantly plugged in. Which as you can imagine, limits the utility of having a laptop in the first place.
    I did take it back to the retailer and since I had purchased a warrantly extension, was hoping that they would replace the battery. They refused indicating that the battery is not covered and that by not using the laptop intitially after purchase, I had in effect damaged the battery.
    Is this possible? Can a battery to irrevocably damaged through inactivity? I think that the period was around 9 months during which he had not even unwrapped it from the box.
    If it is, are replacement batteries an option or should I order an orginal Toshiba battery? Also, are there extended life battery options available for this model?
    Thanks in advance

    > Is this possible? Can a battery to irrevocably damaged through inactivity? I think that the period was around 9 months during which he had not even unwrapped it from the box.
    > If it is, are replacement batteries an option or should I order an orginal Toshiba battery? Also, are there extended life battery options available for this model?
    yes, it can take place. It's recommended to charge the battery full even if not used. You should use original Toshiba batteries Don't think that there is extended life battery option available
    You can read the followings just for information:
    http://aps2.toshiba-tro.de/kb0/FAQ35007K001ZR01.htm
    http://aps2.toshiba-tro.de/kb0/TSB8702EU0001R01.htm

  • Wireless connection is not working on my Satellite U400/03S

    Hi Guys,
    I have Toshiba Satellite U400/03S laptop and I have a very strange problem that I can't seem to get around.
    I signed up new ADSL2+ connection and yesterday when was I trying to setup it up I found the I can connect to internet through wired but not wireless.
    The laptop shows the network in the list with full signal strength. I have configured the connection properties identical to my laptops including the WEP key and such. When I go to connect to the network, it just sits and says "Waiting for network" for approximately 5 mins, then that dialog dissapears and never connects to the network, just goes back to the network selection screen.
    Has anyone had this problem? If so how did you go about fixing it? This is very frustrating and have been playing with router options and computer options for hours now trying to get it to work properly with no luck.
    Just to let you know guys that I am using Billion BiPAC 5200G RC wireless router and windows XP pro on my laptop.
    Help please! Thanks in advance to all that reply.
    Sam
    Message was edited by: dhiru

    Hi buddy,
    I agree with Macius. You should contact your internet provider because I think its a problem with your Internet connection or router that you get from them. So you can check with the guys step by step if everything is configured properly.
    For creating a WLAN connection you have to configure the settings in router like encryption, MAC address filter, etc.
    For testing I would disable all these security features.
    Last but not least you should check the TCP/IP configuration of your WLAN card. Maybe you need a static IP address or DHCP Depending on your router ;)

  • Re: Satellite U400-11Q with Vista has new HDD but no recovery disk

    Hi,
    Before I start a very important message: I usually don't work with pc...:-) At my work we have an IT-department for our PC's :-))
    However, now I have to work privately with a PC/ notebook and I need help: I am sitting in front of a Toshiba Satellite U400-11Q with a completely newly formatted HDD and unfortunately with NO recovery CD or DVD whatsoever !!
    So far I have managed to format the HDD aagain and to put a WindowsVista Home Basic (OEM Software) from my old pc onto this notebook. However, nothing works yet ( I want to get into the Internet etc.)
    Therefore I now need to put on all relevant drivers as well as the original TOSHIBA drivers, right ?
    How do I do this ? Which drivers to I need ? Do I need to download all relevant drivers (totally 113) one by one from the Toshiba website ?
    ANY help is appreciated as I can see myself spending the whole night in front of this PC..
    Thanks,
    M

    Hi Dr.Lamp,
    thanks for helping me with listing the drivers as well as giving me a recommendation on the use of Windows 7.
    Re Windows 7, unfortunately I only have a "free" VISTA Home Basic at home and therefore I have used this operating system for tonight ! I want to get this PC/ machine running as well as possible as quickly as possible...just unfortunate that its a PC with the need of "thousands of drivers"...
    If anyone in cyberspace is interested in reading about my HUGE problems with simply setting up a computer newly, I can at this point simply recommend to you PC fanatics:
    Please do put onto the internet decent driver packages to download for somebody like me in a bulk !!! why make life so difficult ? How the hell will I get the right order of driver packages ( which you are listing) on to this PC if I have:
    - no idea where to find the drivers you mention ( I have to google every single one of them)
    - I have already bought a "recovery DVD from Toshiba, but which takes up to 14 days to arrive and costs about 36 EUR
    - I just want to get the computer up and running properly with all licenses legally acquired !
    So here I am after about 12 hours of woring on this thing as a newbe:
    I have so far this evening managed to firstly install a network driver ( I also had an old VISTA resource DVD at hand) after somehow installing some "recommended network drivers" ( by this recovery DD).
    This way I managed to get the wireless LAN connection up and running which is a huge success, because I can now download drivers form INTERNET directly onto the computer.
    Currently there is an installation running of Windows VISTA including about 120 updates for this VISTA, so I am busy on these updates...I am nowhere close to the 50% installed mark so I probably will have to get some sleep now and continue tomorrow with you list as well as finding your drivers and installing them in the right order ! What a drag ?! Well, somehow these PC's just cost you TONS of TIME..
    Anyway thanks for you help and if you can give me a hint on a shortcut, I would be very happy to hear about it.
    Thanks
    J(M)

  • Satellite U400 - the webcam does not work anymore

    Hello guys here is my sudden probloema!
    About a year ago I purchased a laptop
    TOSHIBA - Satellite U400
    with s.o. WinVista 32bit and with integrated webcam chicony etc. ....
    For a year, everything worked correctly, but for some days now, the webcam does not work anymore.
    As soon as I try to open it, a message of management software cam that says "Webcam driver open fail, please restart or computer room"
    I tried to do it all: aggioronato and downloaded the drivers from toshiba, uninstalled the program and re installed the webcam ....! updated bios notebook ....! useless!
    the strange thing .. well that going into device manager ... the webcam is not there ....! but if the launch seems to open just then check quell caz ... Warning!!
    Gan you help me?
    Graziee

    Are you familiar and comfortable with LINUX LIVE bootable discs to load an alternative operating system with unobtrusive but extensive Toshiba device support so you can determine if your webcam hardware is ruined or if the problem is software and possibly solved reinstalling Windows ?
    At this point, you're pondering less time consuming but more expensive choices such as buying another web cam, or another computer and you might be temporarily borrowing someone else's web cam / using a non preferred spare web cam that isn't optimal for your needs.
    Continuously downloading software, registry cleaners, and repeatedly reinstalling drivers will eventually ruin your Windows installation and consume more time than you've wasted so far and still doesn't guarantee to fix your malfunction.

  • Satellite U400 - loud noise coming from cooling modules

    Hi,
    have bought few month's ago Toshiba Satellite U400 and everything was perfect and i just bought it because i do not like sounds.
    When i surf on the net i like it to be quite, but these last 5 days it has started to sound.
    Toshiba U400 works and it takes out to much "Air" from the side and just sound all the time, even if i open IE or MSN or anything, and before it just did sometime but now it does often.
    Please help me because this is very annoying and it sounds to much, and i do not like it, why has this start to happend now and not before? and what can i do about it?
    thnx.

    Hi
    This is worth checking. I had a similar problem myself and I noticed that on my wife's profile the fan's behaved but on my profile the fans went crazy.
    I did some digging and noticed through Task Manager that a particular process was using an aweful lot of CPU. I did some more digging on the process and discovered it was the Bluetooth driver. I checked in the system tray and sure enough Bluetooth was active. So I logged onto my wife's profile and on her's, Bluetooth was disabled.
    So I went back into my profile, disbaled the bluetooth, right click on the Bluetooth icon in the system tray and select disable. All nice and quiet again.
    It's worth a try.

  • Satellite U400 will not usually boot up

    Hi all,
    I have a Toshiba Satellite U400-217 (PSU44E) running Windows 8.
    Worked fine until a week ago. Now, when I switch it on, the indicator lights light up, there is a brief hard drive spin (1 second) - and then nothing. The lights above the keyboard stay lit, but the screen stays black.
    I read a reset remedy where you take the battery and power cable out and hold the power button for 30 seconds, then plug the power cable back in, boot up, shut down, reinsert battery and boot up again.
    However, the machine will still not boot up after the 30-second button hold. I still just get the lights and nothing else.
    However, the machine will generally boot up fine on one attempt out of every 30 or so.
    It's annoying - any ideas or suggestions very gratefully received.
    Many thanks,
    KaiBosh

    > However, the machine will generally boot up fine on one attempt out of every 30 or so.
    In my opinion you should firstly check the HDD
    A friend of mine installed Win 8 on new notebook from another manufacturer
    After some time the notebook could not boot up I thought its something wrong with motherboard but finally it was just an HDD malfunction
    To be honest I dont know if its only HDD issue but in my opinion the HDD is one of the first parts which should be checked
    Ok, in worst case it could be possible that mobo malfunctions.

  • Satellite U400 running little slower now

    My laptop Toshiba Satellite U400 running little slow and maybe because i have old drivers for:
    *Mobile Intel (R) 45 Express Chipset Series Processor to DRAM Controller - 2A40
    Yes because it shows i have version for this: 8.7.0.1007* but the *NEW version* *is: 9.1.1.1012*
    Where can i get these new drivers please?
    bcz as i said earlier my laptop is runing little slower now.
    Thanks.

    No smart Paolo, i dont know about smart but now this is second time i tell you, its not the same question it's not about the same driver even.
    Read carefuly and you'll see.
    It doesnt seem you can help people so good, so plz if you can't help and HAVE NOT knowledge and are not good at PC-solution then it's better to not post at all.... Because if i have followed your help maybe my laptop now would be destroyed, since you said i had wrong drivers for my Graphic Card, i was close to follow your instructions and to mess up and maybe even destroy by uninstalling and installing drivers, because Graphics are senestive now , but i am glad i did not follow your Instructions Paolo30.
    *Anyone that know about this issue ? where to get latest drivers for Mobile Intel (R) 45 Express Chipset Series Processor to DRAM Controller - 2A40 ?*

  • Satellite U400 - Internal microphone is too quiet

    I am running on Windows7 x64. I have downloaded latest sound drivers (4.98.6.61) and now is internal microphone very quiet although its volume is on max.
    I had Vista x64 before and everything was ok. I have tried Vista drivers on Windows 7, but nothing changed - still quiet mic.
    Thanks for an advice.

    Hi
    I had the same issue with my Satellite U400 but on Vista. After updating the sound driver and BIOS the issue did still exist.
    After searching a little bit here in the forum I activated the microphone boost and this was the solution! :)
    1.Open the "Control Panel" (Standard view)
    2.Click on "Hardware and Sound"
    3.Click on "Sound"
    4.Click on the "Recording" tab.
    5.Mark the Microphone and then press on the "Properties" button.
    6.Click on the Custom tab and set the check by Microphone Boost
    Check this!!

Maybe you are looking for

  • Mac Mini & ethernet issues

    Hello, i bought a mac mini just a couple of weeks ago and upgraded it to OS 10,7,4. it was all running just fine for a start so i made an account for itunes and turned off the computer. But now, the mac mini just does not connect to the internet even

  • Itunes will not manually sync music with my Iphone 5

    I am trying to manually sync music from ITunes and my Iphone5. From the Info screen I have selected the option to manually sync music and video files. From the music screen I have selected the option to sync selected artists, etc. I selected some of

  • Loading a Flex3 SWF into an AS3 SWF

    I have an AS3 shell project which bootstraps my application by loading several other AS3 and Flex3 SWFs. The problem I am seeing is that tooltips in the Flex3 SWFs never show up. The events trigger properly but they simply never appear. Anyone know h

  • How can i get radio on my iphone4s without the internet

    How can i get radio on my iphone 4s without the internet. tyou

  • Acrobat Pro resizing print pages

    I need to resize a bi-tonal 600 DPI PDF image only file by 80% of original size. When I process this file it turns the pages into grey scale pages. How do I turn this off and just keep the image as bi-tonal.