C: drive small, using E: instead..

Hi, recently purchased a HP envy 810 desktop
I'm a novice within this aspect, apologies for the stupid question!
Via past laptops, desktops etc i've always been used to having all programmes located and installed automatically within C:\Program Files (x86)\ (etc) so i never thought to check and having just tried to install something else via Steam was prompted that there was not enough space.
I've cut it down for now, stopped installing everything and deleted a few things as to not fill it up.
C: Windows - 40.8/107 GB
D: Recovery - 1.19/10.1 GB
E: Datadrive - 1.81/1.81 TB
Is a simply a case of moving everything from to the D: drive, thus the large portion of my files now being located in D:\Program Files (x86)\ (etc)? Or do u have to somehow make the C: drive the larger one? Or are there other steps i need to go through in order to make the E: drive the default one for installs etc?
As stated, complete novice, apologies!

Hi Tom-John,
I would think you a have a 128 GB SSD as the primary system and boot drive (C:\).
Drive D:\ should only contain the HP Recovery image. You will have to uninstall all programs you installed to the D:\ using Control Panel, Programs and Features.
Don't tamper with the HP Recovery Image.
Then reinstall those programs to the E:\ drive. The E:\ drive should be used for large data files such as video games and music libraries. You have to change the default install path to E:\ when installing the programs.
Have you made an HP Recovery Disc set or USB drive? Having spurious data on the D:\ drive may cause issues when attempting to create an HP Recovery set or USB Drive. Try creating a Microsoft Recovery drive, instructions can be found here. You will need a 16 GB USB drive. Make sure you copy the recovery partition when creating the Microsoft Recovery drive.
Jaco
****I am not an HP employee****
Please give a" Kudos, Thumbs Up" if advice received is relevant or" Accept as Solution" if your problem has been solved.
HP Products:
810-150se Desktop
17t-j000 Notebook
1380t Desktop
560z Desktop
Errare humanum est.

Similar Messages

How can I use my external hard drive for my iphoto instead of my mac book pro memory?

i don't know if this question has been asked before: how can I use my external hard drive for my iphoto instead of my mac book pro memory? just like itunes all my song are save on my external hard drive. make sense?

Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
LN

I would like to store my music files on a external harddrive when using itunes instead of using my internal drive but cant seem to configure the macbook to do this. can someone tell me how ?

I would like to store my music files on a external harddrive when using itunes instead of my internal drive but can't seem to configure the computer to do this. can someone tell me how ? .

Copy the entire /Music/iTunes/ folder to teh external.
Hold Option and launch iTunes.
select Choose library... and select the iTunes folder on the external.
Make sure the external is connected and ready before launching iTunes.

I'm using LR5.7 on a Mac Mini running Mavericks and when I attempt to import a folder of new RAW photos from my external drive into my catalog instead of seeing a preview of each thumbnail photo I see the following message displayed: "Preview Unavailable

I'm using LR5.7 on a Mac Mini running Mavericks and when I attempt to import a folder of new RAW photos from my external drive into my catalog instead of seeing a preview of each thumbnail photo I see the following message displayed: "Preview Unavailable for this file." If I highlight any other folder of photos the previews are all there. What is the likely reason for these previews being unavailable? JohnnyCam

What camera took these RAW photos?
Did you use any Nikon software to transfer the photos to your computer's hard disk?

Have a lot of music... Any way to keep it off my hard drive yet use it?

Hi all!
I am quite new to the mac family, and am just getting my computer set up to my liking. I was wondering if it would be possible for me to keep my 12,000 songs on my external hard drive and use them from there, instead of putting them onto my relatively small (compared to my external hard drive) 250GB hard drive on my mac. When i used to use windows, whether I wanted it this way or not, It would "copy" all the files into itunes, but they wouldn't actually be stored there. Only the names would appear, and I would still have to plug in the ext. hard drive if i actually wanted to play the files. is there anything like this for mac?
also, since I have so much music, and download music so often and in large amounts, I was wondering if anyone has any recommendations on how to keep an organized music file, and a way of downloading and putting them into itunes so that I can actually keep track of all the music?
Any help will be greatly appreciated!
Thanks to all.
Best,
Alex

Asherr130 wrote:
so basically, I have all this music on my computer already, and I've been trying to go through it to cut it down to only the things I want.... can I drag those files directly from itunes to a hard drive
yes. i would ALWAYS let iTunes do the moving lest it loses track of where the files are stored.
follow the instructions in this link to move your iTunes library to an external HD. the article is for Mac. if your music is still on the windows machine, check this read for pointers: http://lifehacker.com/242468/geek-to-live--how-to-move-an-itunes-library-from-a- pc-to-mac-and-back.
also, when I've done that, and have everything on the external hard drive, I can go clean up all the music files still left on my computer.... then I press option and drag everything back to itunes? what will that do for me?
as i mentioned, this will make iTunes reference the path to the original location (your external HD) but will not copy the files physically.
and how will I be able to work with my music and update it after that?
you mount the external HD before launching iTunes. now you can do whatever as if the files where on your startup disk.

Format external drive for use with both Leopard & XP, & maybe Win7

I want to repurpose one of my old small Firewire drives to use with both Leopard and XP via Boot Camp on my MacBook. It is is 60GB and is currently formatted with MacOS Extended Journaled, and Apple Partition Map. I don't think I will have any need at the present time to store files of more than 4GB on it (most of the ones I want to store are no more than a few hundred MB each).
Is using FAT32 with Master Boot Record adequate? Up until now I have just used flash drives for external Windows storage, but I would like to consolidate lots of topographic maps files onto this one Firewire drive instead of using multiple flash drives, and use these files with both Leopard and XP. If I want to try Windows 7 in the future via either Boot Camp or virtualization, will there be a problem with FAT32/MBR?

Hi,
using FAT32 as file system and MBR as partition table should work just fine with OSX and all Windows versions up to 7.
And since your files don't come close to 4GB single-file-size, that FAT32 limitation is no hinderance.
Use Disk Utility to do this, since Windows won't format partitions/drives with more than 32GB to FAT32 (built-in limitation).
Nonetheless it can use such partitions (I have a 200GB on my external HD).
Regards
Stefan
Message was edited by: Fortuny

180 GB of my 639-GB Macintosh hard drive is used. 320 GB of my 498-GB Tie Capsule is used. Only one backup ("now") exists for the Time Capsule, which can no longer backup because of "insufficient space". How come? What is wrong?"

180 GB of my 639-GB Macintosh hard drive is used. 320 GB of my 498-GB Tie Capsule is used. Only one backup ("now") exists for the Time Capsule, which can no longer backup because of "insufficient space". How come? What is wrong?"

Thank you William for your most helpful response. I shall deal first with your three comments:
Not being tech savvy, I would not have been able to make that call myself but it sure makes sense.
I have updated my profiles as you suggest. Excellent tip.
This guidance is good. Being new to Apple Support Communities, I did not find the field a labeling and guidance to be clear, a point you make. Now I know, I shall do as you say and will use the small slim box as a header to the full message/question, which will place in the larger box below.
Secondly, I come to your question: Did anything change on your Mac recently, such as replacing the disk or main logic board?
The answer is “yes”. Two events have happened both of which concerned the Time Capsule:
The telephone company, with which I have access to the Internet and I have my email account, installed a new modum. After the technician left I had to try and get the Time Capsule and WiFi working again which ended with my having to call Apple for technical assistance. The Apple technician walked me through a number of procedural steps which effectively re-set up the Time Capsule.
Access to the Internet failed and the telephone company reset the modum. I had to call Apple again. This time the technician did not reset the Time Capsule but walked me through a number of steps tha included renaming the “site” (not the Time Capsule).
Another piece of information that may be relevant is that the MacBook Pro uses the Time Capsule for backup. Everything appears to be in order. When I enter the Time Capsule for this laptop I have backups going back for a long time.
Also, I do a weekly backup of the two computers onto another external hard drive using the Time Machine software. So I have another backup of both computers.

How to transfer data from macbook pro to an external hard drive, im using (WD 1TB 3.0) ???. I cannot copy anything from my mac to it not a single file.

how to transfer data from macbook pro to an external hard drive, im using (WD 1TB 3.0) ???. I cannot copy anything from my mac to it not a single file.

ok - since you'll be sharing it with a PC - connect it to your windows pc - then format from there - instead of NTFS format - choose exFAT.
or, you can read the link below on how to do it in dos mode.
http://answers.microsoft.com/en-us/windows/forum/windows_7-files/how-can-i-forma t-external-drive-in-exfat-not-in/0f6bf19a-19d6-4470-ae05-53ddf26bb476?msgId=1860 eae3-3488-4eea-8326-f87b89d9851b
once you've formatted it - you can now use it in both your macbook and windows computer.

My external hard drive I use for time machine failed.

I replaced it with a new drive and used a new name for the drive. Time machine uses the new drive (with new name) and backs up to it without any problem.
But every day, Time Machine complains it can't back up to the old drive. I can't delete the old drive from the Time Machine GUI. How do I fix this? Is there a way I can edit a system file using terminal?

Instead of using Terminal, try to reset Time Machine to default settings, following these steps > http://pondini.org/TM/A4.html You won't lose anything

Perfect Hard Drive To Use With Time Machine?

Hi,
Has anyone found out what's the perfect External Hard Drive to use with Time Machine?
I have experience with a few of WD's My Book models (Essential, Pro and Studio). The problem with all of them is that they automatically keep switching themselves off (spin down) and on (spin up) throughout the day, in an effort to save power. But it's actually quite annoying. The My Book drive will automatically turn itself off, and then turn back on again within the space of one minute. Also, going to use Spotlight (even if you've excluded Time Machine Backups from being indexed) will automatically prompt the My Book drive to turn back on, which introduces a small delay to using Spotlight.
Does anyone make an External Hard Drive, with a Firewire 400 or 800 connection, that stays on ALL the time and doesn't automatically make decisions about when it should spin down or spin up?

I'am using a 500Gb Freecom Pro Hard Drive connected on USB via my Cinema Display. I so forget about it that I often forget to disconnect it from my laptop before leaving the office... Never complained about it
Btw, it does not implements the energy saver Auto turn off/on feature which I don't need cause the time it could mostly be really useful is by night. As it stops when I disconnect the USB and start again when I connect it back.. this is perfect to me.
I must say I'm quite happy with every Freecom product I bought and this one certainly don't break the rule

I cannot use a website I need to use, with Firefox 5.0. So, I need to uninstall and go back to 3.5 or 3.6. Please advise. Also, my control panel locks up since Windows Explorer has pbms. Which is why I am using Firefox instead. Thanks for any help!

I cannot use a website I need to use, with Firefox 5.0. So, I need to uninstall and go back to 3.5 or 3.6. Please advise. Also, my control panel locks up since Windows Explorer has pbms. Which is why I am using Firefox instead. Thanks for any help!

''I figured it was going to be FAFSA causing your problem.''
Install Portable Firefox 3.6.x to your hard drive for that one website. It won't affect your current Firefox installation at all. <br />
http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

Can we use BLOB instead of LONG RAW in JMSStore

(Oracle 9i, Weblogic 8.1.2)
          We are putting in place a Dataguard environment (or standby database). In such environment, prod data is copied to another database in 'pseudo' real time. Unfortunately some 'old' datatypes are not supported by Dataguard. In JMS tables %JMSSTORE, the field RECORD is defined as LONG RAW and LONG RAW is one of the unsupported datatypes.
          Can we alter those tables in order to use BLOB instead of LONG RAW ?
          Regards,
          Bao Nguyen


Hi Bao,
          Answers in-line:
          Bao Nguyen wrote:
          > (Oracle 9i, Weblogic 8.1.2)
          >
          > We are putting in place a Dataguard environment (or standby database). In such environment, prod data is copied to another database in 'pseudo' real time. Unfortunately some 'old' datatypes are not supported by Dataguard. In JMS tables %JMSSTORE, the field RECORD is defined as LONG RAW and LONG RAW is one of the unsupported datatypes.
          >
          > Can we alter those tables in order to use BLOB instead of LONG RAW ?
          Not supported in 8.1. A supported Oracle BLOB capability will be
          available in the next release. I can think of two
          possible work-arounds:
          (1) The following might work, but is not currently supported by
          BEA: Manually create the table with a BLOB type and use
          an Oracle OCI or BEA type IV driver. Definitely do NOT use
          an Oracle thin driver, as data corruption may result.
          (2) I recall that another customer had a replication product
          they were able to get working with LONG RAW by modifying
          the table definition so that the table's handle index was a primary key.
          I do not remember the name of the product.
          (The latter modification is supported for certain releases
          now - but I think this usage must be confirmed with customer support.)
          Tom
          >
          > Regards,
          >
          > Bao Nguyen
          >

I have a MacBook Pro running Lion. I need to use Lion to run my Dragon. I would like to partition my drive to use Maverick for everything but the dictation software. I'm a new pie to apple

I have a MacBook Pro running Lion. I need to use Lion to run my Dragon. I would like to partition my drive to use Mavericks for everything but the dictation software. I'm a newbie to apple

To resize the drive do the following:
1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.

Artwork doesn't transfer to my Kingston flash drive for use in my car.

I am transferring songs to my Kingston flash drive for use in my car. When I copy them from my folder and drop them in the flash drive the album artwork doesn't transfer. I deleted the artwork from the songs of 1 CD, saved a jpg to my desktop and added to each individual song which works but would be crazy to do for all of the songs. I am running ITunes 11.05.
I've looked in the communities but couldn't find anything about this. Is there a way to revert back to ITunes 10?

Placing your iPhone in the toilet was the correct thing to do but you should have purchased an android phone instead. That would have solved these issues. :-)

DTP plugin can't connect to 10g DB that uses SERVICE_NAME instead of SID

Hi,
I am trying to set up a connection to a database that uses a service name instead of a SID (see below for the TNSNAMES entry. It gets an ORA-12505 error because the listener does not know of SID given in connect descriptor. The Connection descriptor used by the client was:
tdc-sun-77-vip.unix.tdc.xxxyyy.com:1521:SRV_TMS_TNV.
My understanding is that the url for JDBC for service name should use a "/" instead of a ":" to separate the port from the service name. The dialog for creating the connection in SQL Developer has radio buttons to choose between SID and Service Name, so it can generate the url appropriately. The wizard for the Eclipse plugin does not have this option and the plugin always uses a ":" as the separator.
If anyone else has encountered this and gotten around it I would appreciate knowing how.
I am using the Oracle Database Tools 1.2.0.200907171332 for Eclipse Galileo.
Thanks... Bob
AMR01TNV_TMS =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = tdc-sun-77-vip.unix.tdc.xxxyyy.com)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = tdc-sun-78-vip.unix.tdc.xxxyyy.com)(PORT = 1521))
(LOAD_BALANCE=ON)
(FAILOVER=ON)
(CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = SRV_TMS_TNV)
(FAILOVER_MODE=
(TYPE=select)
(METHOD=basic)
)))

Still broken after two years. Oracle Database Tools version 1.7.2.20110330204, part of OEPE 11.1.1.7.2. Using Oracle Thin Driver ojdbc14 for 10.2.0.2.
(1) Change to Database Development perspective.
(2) In Data Source Explorer, right click Database Connections. Choose Connection Profile Oracle Database Connection.
(3) Name: OEPE Is Broken
(4) Description: Service Names Are Not Supported.
(5) Click on the icon to the right of Drivers: Oracle Thin Driver. This allows one to edit the driver definition.
(6) Change ConnectionURL to 'jdbc:oracle:thin:@server:1521/servicename. This will prove that the plug-in is not using the driver definition as a template.
(7) Use SQL Developer to probe your database. Ensure that the database is one that requires a service name and cannot connect using a SID.
(8) In the "New Connection Profile" dialog....
SID: (try a service name for a database that requires it)
Fill in Host, Port number, User name, and Password.
Note that the ConnectionURL contains a colon instead of a slash in front of the service name. The plug-in seems to be using the colon.
(9) Test Connection
java.sql.SQLException: Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
The Connection descriptor used by the client was:
ac4-xxxxx-007-v.ysm.ac4.yahoo.com:1521:acxxxxx.ysm.ac4.yahoo.com
(10) Maybe Test Connection does not work and the plug-in is functional. Click on Finish. No, not the case.
(11) Maybe SID should be

C: drive small, using E: instead..

Similar Messages

Maybe you are looking for