C# - Find the number of service bus namespaces programatically

How can we retrieve the number of provisioned service bus namespaces from a subscription programmatically. Are there any published libraries (NUGET packages) from Microsoft to get this information.
Thanks,
Sankaranarayanan MG

Hi,
You could use Powershell to get all servicebus name space:
Get-AzureSBNamespace [-Name]
Retrieve the list of namespaces
If there is an error when specifying a name, we should make the HTTP call to get the list and check if it exists in the list.
see this page:
https://github.com/Azure/azure-sdk-tools/wiki/Microsoft-Azure-Service-Bus-Cmdlets
Also, you could try this library:
https://www.nuget.org/packages/Microsoft.WindowsAzure.Management.ServiceBus/0.15.2-preview
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Azure service bus problem : An error occurred while retrieving the Service Bus namespace configuration information

Almost all of my service bus has the following issue. The error message I have from the Management Portal was "An error occurred while retrieving the Service Bus namespace configuration information. Please try again later." This happen for almost
2 days.
Anyone face the same issue? how to resolve this?

Hi,
If you create a new one, did you receive the same issue? If that, I suggest you submit a ticket at:
http://www.windowsazure.com/en-us/support/contact/
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to find the number of Z or Y programs and amount of code lines?

hi all, I'm trying to find the number of programs on user namespace (Z* or Y*) and the number of coded lines in them. something like report Z_MY_REPORT, lines 582; Include Z_MY_INCLUDE, lines 135.
Exist any standard report to do it or do I have to develop it by myself?
thanks for any suggestion.

If you have to do in urself
DATA: i_reptx TYPE STANDARD TABLE OF textpool WITH HEADER LINE.
READ TEXTPOOL 'ZJ_ALV' INTO i_reptx.
and describe the itab.. and get the lines.
In conjunction with TADIR table to get the program repository.

How to find the number of occurence of a string

String str="The AR tech seeks experienced candidates in java,jsp. The candidates should have atleast 1 year of experience in the specified skills.";
here i need to find the number of occurence of the string "experience".
how to find it out?

String str="The AR tech seeks experienced candidates in java,jsp. The candidates should have atleast 1 year of experience in the specified skills.";
String findStr = "experience";
int count = 0;
int index = 0;
while(index != -1) {
index = str.indexOf(findStr, (count == 0 ? 0 : index + findStr.length()));
if(index != -1) {
count++;

How to find the number of data items in a file written with ArryToFile function?

I have written an array of number in 2 column groups to a file using the LabWindows/CVI function ArrayToFile...Now if I want to read the file with FileToArray Function then how do I know the number of items in the file. during the write time I know how many array items to write. but suppose I want the file to read at some later time then How to find the number of items in the file,So that I can read the exact number and present it. Thanks to all
If you are young work to Learn, not to earn.
Solved!
Go to Solution.

What about:
OpenFile ( your file );
cnt = 0;
while ((br = ReadLine ( ... )) != -2) {
if (br == -1) {
// I/O error: handle it!
break;
cnt++;
CloseFile ( ... );
There are some ways to improve performance of this code, but if you are not reading thousands of lines it's quite fast.
After this part you can dimension the array to pass to FileToArray... unless you want to read it yourself since you already have it open!
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

How to find the number of entries in a master data table

Hi Experts,
I am trying to find the entries in 0CUSTOMER master data.
BW>LISTCUBE>Data target: 0CUSTOMER and selected the fields that I need.
I would like to know how to find the "number of entrees". I tried to run the SUM for a count field, but it is taking forever as there are huge number of records .

Hi Dev,
Go to the change/display mode of the info object (0CUSTOMER) in your case. Go to the Master data/Text tab. Here you will find the master data tables according to your settings (P orQ or X or Y). Double click on the table name and it will take you to the SE11 display. From there, you can check the number of records as you do in any transparent table.
Hope this helps.
Thanks and Regards
Subray Hegde

How to find the number of links in a website

hi every body
can any one clear my doubt
my doubt is that
in a website how to find the number of links the hole website contains
is there any navigation tool to find that
plz help me yar
i am waiting for the reply

If you're talking about commercial sites (sites you don't have the source code for) I'm not sure.
If you want to count the links in site that you have the source code for, it should be relatively easy to write a Java application to do it. All you really need to do is have a list of the files you want to count links in, read each file line by line and check for the existance of the <a> tag in each line. Anywhere their is an <a> tag there is a link.
Hope this helps.

How to find the number of times method being called.....

hi,
can any one pls tell me how to find the number of times the method being called......herez the example....
Refrence ref = new Refrence();
for(int i = 0;i < arr.length; i++){
if(somecondition){
ref.getMethod();
here i want to know how many times the getMethod() is calling...Is there any method to do this.. i have seen StrackTraceElement class..but not sure about that....pls tell me the solution....

can any one pls tell me how to find the number of times the method being called......
herez the example.... http://www.catb.org/~esr/faqs/smart-questions.html#writewell
How To Ask Questions The Smart Way
Eric Steven Raymond
Rick Moen
Write in clear, grammatical, correctly-spelled language
We've found by experience that people who are careless and sloppy writers are usually also careless and sloppy at thinking and coding (often enough to bet on, anyway). Answering questions for careless and sloppy thinkers is not rewarding; we'd rather spend our time elsewhere.
So expressing your question clearly and well is important. If you can't be bothered to do that, we can't be bothered to pay attention. Spend the extra effort to polish your language. It doesn't have to be stiff or formal ? in fact, hacker culture values informal, slangy and humorous language used with precision. But it has to be precise; there has to be some indication that you're thinking and paying attention.
Spell, punctuate, and capitalize correctly. Don't confuse "its" with "it's", "loose" with "lose", or "discrete" with "discreet". Don't TYPE IN ALL CAPS; this is read as shouting and considered rude. (All-smalls is only slightly less annoying, as it's difficult to read. Alan Cox can get away with it, but you can't.)
More generally, if you write like a semi-literate b o o b you will very likely be ignored. So don't use instant-messaging shortcuts. Spelling "you" as "u" makes you look like a semi-literate b o o b to save two entire keystrokes.

How to find the number of fetched lines from select statement

Hi Experts,
Can you tell me how to find the number of fetched lines from select statements..
and one more thing is can you tell me how to check the written select statement or written statement is correct or not????
Thanks in advance
santosh

Hi,
Look for the system field SY_TABIX. That will contain the number of records which have been put into an internal table through a select statement.
For ex:
data: itab type mara occurs 0 with header line.
Select * from mara into table itab.
Write: Sy-tabix.
This will give you the number of entries that has been selected.
I am not sure what you mean by the second question. If you can let me know what you need then we might have a solution.
Hope this helps,
Sudhi
Message was edited by:
Sudhindra Chandrashekar

How to find the number of occurance of a string in text field of Infopath form?

Hi All,
In Infopath text field, How to find the number of occurrence of a particular string in that field?
Thanks in advance!

You can check to see if it contains a string once by using the contains function, but there isn't a very clean way to do what you want. If you wanted to guess at the maximum number of occurrences, then you could:
Box A has your initial. Set Box B to do a concat of string-before and string-after of Box A where it copies Box A minus the string we're looking for. Then we have Box C that does the same thing to Box B. Repeat as many times as you see necessary.
Example:
String: "1"
Box A - "123451234512345"
Box B - "23451234512345"
Box C - "2345234512345"
Box D - "234523452345"
etc.
We then have a field that has nested ifs looking backwards from Z -> A looking for a non-blank. Based on that, we return the number of occurrences. Again, this isn't clean, but it will work if you think there's a predefinable maximum.
Andy Wessendorf SharePoint Developer II | Rackspace [email protected]

How to find the number of users connected to database from OS level(Linux)

Hi All,
Could anyone know , how to find the number of users connected to database without connecting with sql*plus
is there any command to find it?
example we have 10 databases in one server, how to find the number of users connected to particular database without connecting to database(v$session)?
oracle version:- 10g,11g
Operating System:- OEL4/OEL5/AIX/Solaris
any help will be appreciated.
Thanks in advance.
Thank you.
Regards,
Rajesh.

Excellent.
Tested, works as long as you set the ORACLE_SID first ( to change databases )
ps -ef | grep $ORACLE_SID | grep "LOCAL=NO" | awk '{print $2}' | wc -l
Thanks!
select OSUSER
from V$SESSION
where AUDSID = SYS_CONTEXT('userenv','sessionid')
and rownum=1;Best Regards
mseberg

How to find the number simultaneous call at a given moment on UCCX ?

Hello,
I would to know how to find the number simultaneous call at a given moment on UCCX ?
it's on UCCX or UCCX RTMT, I don't know thanks a lot for your help.
Aubert

Hi Gergely,
I should made a report on the number simultaneous call at a given moment on UCC on the server (all calls on the server)..

How to Find the number of Databases in a server.

HI,
Please tell me how to find the number of Databases are in a server . when the DB is not up.
ps -ef | grep ora_
This i know whether our DB is up or not. But i want to know how many databases are in a server .If the database is down .
Cheers,
Gobi.

Hi,
[oracle@oralinux admin]$ lsnrctl status
LSNRCTL for Linux: Version 9.2.0.4.0 - Production on 01-DEC-2006 16:25:41
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC)))
TNS-01169: The listener has not recognized the password
[oracle@oralinux admin]$
Plz give me the solution.
Cheers ,
Gobi.

How to find the number of ODBC connections to Oracle Database

Hi All,
How to find the number of ODBC connections and all connections to the Database in last week. Are there any views to get this information?
Thanks in advance,
Mahi

What Ed said is true that Oracle doesn't note which type of protocol is connecting to the database, however, you can see which program is accessing the database.
For example: if you already know of a user using ODBC, you can verify as:
select username, osuser, terminal, program from v$session where username = 'SCOTT'
USERNAME                 OSUSER          TERMINAL   PROGRAM
SCOTT                    IUSR_SRV231     SRV231     w3wp.exe
SCOTT                    IUSR_SRV231     SRV231     w3wp.exe
2 rows selected.Assuming that you can confirm the progam noted in the above (example) is the one using ODBC, then you can change the query such as:
SQL> select username, osuser, terminal, program from v$session where program = 'w3wp.exe';
USERNAME                 OSUSER          TERMINAL   PROGRAM
SCOTT                    IUSR_SRV231     SRV231     w3wp.exe
SCOTT                    IUSR_SRV231     SRV231     w3wp.exe
2 rows selected.Just for kicks, I checked our listener.log file, but there was no reference of odbc in it either.
Hope this helps...

How to find the number of columns in an internal table DYNAMICALLY ?

Hi,
How to find the number of columns in an internal table DYNAMICALLY ?
Thanks and Regards,
saleem.

Hi,
you can find the number of columns and their order using
the <b>'REUSE_ALV_FIELDCATALOG_MERGE'</b>
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
   I_PROGRAM_NAME               = sy-repid
   I_INTERNAL_TABNAME           = 'ITAB'
   I_INCLNAME                   = sy-repid
changing
    ct_fieldcat                  = IT_FIELDCAT
EXCEPTIONS
   INCONSISTENT_INTERFACE       = 1
   PROGRAM_ERROR                = 2
   OTHERS                       = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif
now describe your fieldcat . and find no of columns.
and their order also..
regards
vijay

C# - Find the number of service bus namespaces programatically

Similar Messages

Maybe you are looking for