C key

What is the c key for mac

Well, if you mean, "What does the 'C' key do during bootup?" Holding down the "C" during bootup forces the system to boot from any disc that is currently in your Optical Drive, if that disc has a bootable system on it. Otherwise, the "C" key is just a "C" key. Cheers!

Similar Messages

Remote System and Remote Key Mapping at a glance

Hi,
I want to discuss the concept of Remote System and Remote Key Mapping.
Remote System is a logical system which is defined in MDM Console for a MDM Repository.
We can define key mapping enabled at each table level.
The key mapping is used to distinguish records at Data Manager after running the Data Import.
Now 1 record can have 1 remote system with two different keys but two different records cannot have same remote system with same remote key. So, Remote key is an unique identifier for record for any remote system for each individual records.
Now whenever we import data from a Remote System, the remote system and remote key are mapped for each individual records. Usually all records have different remote keys.
Now, when syndicating back the record with default remote key is updated in the remote system that is sent by xml file format.
If same record is updated two times from a same remote system, the remote key will be different and the record which is latest contains highest remote key.
Now, I have to look at Data Syndication and Remote key.
I have not done Data Syndication but my concept tell if there is duplicate record with same remote system but different remote keys both will be syndicated back. But if same record have two remote keys for same remote system then only the default remote key is syndicated back.
Regards
Kaushik Banerjee

You are right Kaushik,
I have not done Data Syndication but my concept tell if there is duplicate record with same remote system but different remote keys both will be syndicated back.
Yes, but if they are duplicate, they needs to be merged.
But if same record have two remote keys for same remote system then only the default remote key is syndicated back.
This is after merging. So whichever remote key has tick mark in key mapping option(default) , it will be syndicated back.
Pls refer to these links for better understanding.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/80eb6ea5-2a2f-2b10-f68e-bf735a45705f
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/7051c376-f939-2b10-7da1-c4f8f9eecc8c%0c
Hope this helps,
+ An

Sy-tabix when using secondary key

Hi,
I have an internal table with records that contain a field with the line index of another table entry that they depend on.
I can process this table recursively, by passing the parent index inside and using a
LOOP AT ... USING KEY secondary_key WHERE index = iv_index.
Unfortunately the sy-tabix is afterwards not correct, it contains the position in the secondary key probably instead the position in the internal table.
Is there a way how I could find out the current table index, when using a secondary key to read a record?
Regards,
Bruno

I rewrote it to include the row index also, not only the dependency.. was thinking too generic

How do i use my own image with keying (or green screen)

how do i use my own image witrh keying (or green screen)

Put your sky clip on a layer below the clip you want to key. One or the other will be a connected clip. Apply the Keying filter to foreground clip (the one with the green screen). The green will be seen as transparent and the sky will show through as the BG. Adjust as necessary in the Inspector.
Good luck.
Russ

Key fields in DSO

HI experts,
I have the requirement to create DSO with Material,Plant,Usage,BOM,Alternative,BOM category,Counter,Valid From,BOM status,Base unit,Base Quantity fields. I am not involved in the functional part. could you please tell me which fields can take in the key part???
Regards,
KP

Hi Kundan,
What is the data source that you are using to laod the data to DSO?
You can fidn the key fileds with the help of data source. or from the source table if you are not having Data source.(there will be a screw symbol for the key fileds).
you can use material, plant, BOM as key fileds.
Regards
KP

DSO - What key fields and data fields in dso

Hi experts,
I need to create a dso in between the cube and 2 data sources(2lis_11_vaitm, 2lis_12_vcscl) to stage the data. My question is: what key fields and data fields to choose for the dso? is there a standard dso to copy? please explain in detail the model to set up, whether to connect both the ds's to dso and then to cube or one ds to dso and the other to the cube. more details will help.

Check this for standard DSO:
http://help.sap.com/saphelp_nw04/helpdata/en/43/fcdc387f34384f94c3227baf3837a8/content.htm
Thanks...
Shambhu

Key Fields & Data Fields in DSO.

In Standard DSO, Maximum how many number of key fields and data fields we can enter in one DSO?
For e.g : In Cube Char - 248 KF - 233
In DSO Key Fields - ? Data Fields - ?
Regrards,
Nithi.

Hi Nithi,
Since Key fields are decide by us we can add according to our requirement.
Key fields can only be 16 you cannot exceed this. but if you have more key fields, you can combine fields using a routine for a key field
Max Data Fields - 749 data fields can be added in a DSO.
Warm regards
Gokul

Key Figure Summation in DSO

Hi,
I am loading data from Cube to DSO.
In cube i have fields with 2 records below as example
f1=1 f2=2 f3=3 f4=4 and key figure k1=1
f1=1 f2=2 f3=3 f4=4 and key figure k1=1
In DSO all these f1's fields are key fields as per requirement. And when i load now i get in DSO as
f1=1 f2=2 f3=3 f4=4 and key figure k1=2
I do not want k1=2 but i want k1=1 in DSO and not sure why this is getting summed up even though i have selected overwrite in Transfer rules.
I have checked mapping and cube data. All are fine.
I just want to avoid this and do not know what to do.
A routine or formula or something else?
Please help.

Hi,
Check your DSO Design
Keep f1 ,f2, f3, f4, are in KeyFileds of DSO and Keep key figure k1 in DataFields of DSO.
Here I'm assuming that F1 to F4 are Charecteristics.And only K1 is Keyfigure. If this is the case then I hope it will work if you follw the above design.
Thanks
Reddy

Issue with Period Control 03 for Depri key MSTL with 6446

Hi Gurus,
We want to use mid-month calculation for Dep. key MSTL using period control 03 (i.e. 03/03/03/03). We are also using 6446 as year-depedent Fiscal year (i.e. Jan and Dec 6 weeks other rest 4 weeks). period control 03 is pro rata at mid period
period 12 for 2009 start 11/14/09 ends 12/25/09
period 1 for 2010 start   12/26/09 ends 02/05/10
as per period control 03 mid month is Dec-04-2009 (setup in OAVH)
When i acquire an asset on Dec-04-09, the dep start date is Nov-14-09 which is correct and all calculation is correct
however when i acquire an asset on Dec-06-09 the dep start date is still Nov-14-09 which is not correct infact it should start dep from next month which will be Dec-26-09 (This is 1st period of Fiscal year 2010)
As mentioned above we are using 6-4-4-6 fiscal year
When acquiring an asset with mid month concept at year end we are facing problem in depri start date and hence calculation.
The setting in OAVH for period control 03 are as below
FV   Period Control     Desc.                             Year   Month   Day    Period    MidMonth
NL        03              Pro rata at mid period          2009    12        4         12           ticked
NL        03              Pro rata at mid period          2009    12        25       12           ticked
NL        03              Pro rata at mid period          2009    12        31        1            ticked
NL        03              Pro rata at mid period          2010    1          15        1            ticked
Thanks in advance

Deepak,
Your period 12/2009 starts and ends between 11/14/09 ends 12/25/09. Now you acquire an asset on 12/4/2009. As per OAVH, you want depreciation calculation start mid-period. Then how is depreciation start date of Nov 14, 2009 for this case?
Then you acquire an asset on Dec6, 2009. This, as per OAVH, falls into period 12/2009. Then why should the calculation start from period 1/2010 for this case?
Thanks,
Asheesh

SSL private key password

Hello everyone,
I'm trying to upgrade a WLS 6.1 SP2 with WLP 4.0 SP2 instance to WLS 7.0 SP2
with WLP 7.0 SP2. Everythng is fine except for that we cannot use the same
SSL certificate. By defaul the private key is not encrypted with password
(SSL.KeyEncrypted = false by default, according to the documentations) in
both WLS 6.1 and WLS 7.0. But running WLS 7.0 startup script results the
following error:
<Sep 17, 2003 5:06:40 PM HST> <Alert> <WebLogicServer> <000297>
<Inconsistent se
curity configuration, java.lang.Exception: Cannot read private key from file
C:\
bea7\user_projects\agencyPortal\portal_islandinsurance_com-key.der. Make
sure pa
ssword specified in environment property weblogic.management.pkpassword is
valid
.>
java.lang.Exception: Cannot read private key from file
C:\bea7\user_projects\age
ncyPortal\portal_islandinsurance_com-key.der. Make sure password specified
in en
vironment property weblogic.management.pkpassword is valid.
at
weblogic.security.service.SSLManager.getServerPrivateKey(SSLManager.j
ava:434)
at weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:153)
at weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:122)
at weblogic.t3.srvr.T3Srvr.initializeListenThreads(T3Srvr.java:1513)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:852)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:295)
at weblogic.Server.main(Server.java:32)
Is this happening because the private key is actually encrypted with the
password? It was working, although the KeyEncrypted is not set to true and
the startup script for WLS 6.1 instance did have a line
with -Dweblogic.management.pkpassword. Or could this error be result of
something else? The physical machine the instances are located is the same
and IP address and the DNS entry hasn't been changed, either.
Any insight will be greatly appreciated. Thanks!
Makoto

Thanks Tony - it worked!!
"Tony" <TonyV> wrote in message news:[email protected]...
It may be because the private key is both unprotected and in DER format.
There are some things to try:
1) Convert the private key file from a DER file to a PEM file and try
that:
a) Follow the for converting an unprotected private key at:
http://e-docs.bea.com/wls/docs70/adminguide/utils.html#1143743
b) Look at the resulting PEM file, it should look something like
this:
-----BEGIN RSA PRIVATE KEY-----
-----END RSA PRIVATE KEY-----
(Be sure there is no extra lines or whitespace after thefooter)
>
c) Change your configuration to point at the PEM file
If that doesn work, then you can try protecting the key with apassword
using
the wlkeytool utility (It should be in the server/bin directory). The
tool should prompt
for a password to use to protect it:
wlkeytool inputkey.pem outputkey.pem
Then change your configuration to use the protected private key, andset
the passwod to use.
Tony
"Makoto Suzuki" <[email protected]> wrote in message
news:[email protected]...
Hello everyone,
I'm trying to upgrade a WLS 6.1 SP2 with WLP 4.0 SP2 instance to WLS 7.0SP2
with WLP 7.0 SP2. Everythng is fine except for that we cannot use the
same
SSL certificate. By defaul the private key is not encrypted withpassword
(SSL.KeyEncrypted = false by default, according to the documentations)in
both WLS 6.1 and WLS 7.0. But running WLS 7.0 startup script resultsthe
following error:
<Sep 17, 2003 5:06:40 PM HST> <Alert> <WebLogicServer> <000297>
<Inconsistent se
curity configuration, java.lang.Exception: Cannot read private key fromfile
C:\
bea7\user_projects\agencyPortal\portal_islandinsurance_com-key.der. Make
sure pa
ssword specified in environment property weblogic.management.pkpassword
is
valid
.>
java.lang.Exception: Cannot read private key from file
C:\bea7\user_projects\age
ncyPortal\portal_islandinsurance_com-key.der. Make sure passwordspecified
in en
vironment property weblogic.management.pkpassword is valid.
at
weblogic.security.service.SSLManager.getServerPrivateKey(SSLManager.j
ava:434)
atweblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:153)
atweblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:122)
atweblogic.t3.srvr.T3Srvr.initializeListenThreads(T3Srvr.java:1513)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:852)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:295)
at weblogic.Server.main(Server.java:32)
Is this happening because the private key is actually encrypted with the
password? It was working, although the KeyEncrypted is not set to true
and
the startup script for WLS 6.1 instance did have a line
with -Dweblogic.management.pkpassword. Or could this error be result of
something else? The physical machine the instances are located is thesame
and IP address and the DNS entry hasn't been changed, either.
Any insight will be greatly appreciated. Thanks!
Makoto

Manage-bde command is not generating recovery key on network location

Hi,
I am trying to save the recovery key to the network share location and start up key in the USB drive while enabling bit locker.When the OS drive gets encrypted, the default folder for recovery password shows that it contains 1 file but not getting anything
inside it when i checked the properties of the folder.
i have already changed the group policy as "choose default folder for recovery password".
I am using the command to enable the bit-locker as "manage-bde.exe -on C: -rk
<network location to save recovery key> -sk <location of the USB drive>
-rp to enable the bit-locker. It is generating the start up key in the USB but not the recovery key on network share.
Can anyone suggest what i am missing or what else i should do to generate the recovery key on network share.
Does manage-bde process be able to save the recovery key on network share or it hand over to some other process to perform this task.
Thanks
Gaurav Ranjan

I got you Manoj, but I want to ask you one think that what if i lost the startup key or my USB stick. I have my recovery key on the network share. In order to log-in my machine I need the recovery password. From where i will get the recovery
password(48 digit). Surely from the recovery key on the network share. So how can i get the recovery password if only we have the recovery key.
I know both are different in context. Both are two different thing. I have lost my USB stick along with the recovery password and I have to log-in my machine. How can i do that i want to know that. Do there is any method to get recovery password from the
recovery key on network share. I have retrieved the recovery password when the recovery key in AD. But this time it is on network share.
Also one think which I need to solve is that the manage-bde -protectors -add command creates a new .bek file along with the older one. So the .bek file which get shown at the time of the start up of the machine is different from that stored in the network.
So i am getting confused as which .bek file is for which machine and hard to retrieve the password.
Is there any method to store recovery key on network without the -protectors -add command line so that both the .bek file should be matched and can easily be known for indiviual machine in an OU. As if both the .bek files will be different it would be difficult
to to retrieve the recovery password for the machines.
Please do inform if you need some more information about the scenario if i missed something.
Thanks
Gaurav Ranjan

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems n

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Currency Translation on Key Date for AR Aging

Need your valuable advice!
I have created an AR Aging query including both Open and Cleared Items based on 0FIAR_C03_Q0005 standard query. However the requirement is to do currency translation to Group Currency (USD) on Key Date. This Key date is defaulted to today but the user can change this to go back in time and pull all the ARs as of that back dated key date.
I was planning to create a currency translation type on M rate based on the Key Date Variable in RSCUR. However I am confused on which variable to base this currency translation. I have several key date variables in my query such as 0P_KEYD2 (based on Posting Date), 0P_KEYDT (based on Net Due Date) and 0P_KEYD3 (based on Clearing Date).
Which Key Date Variable should I use in 'Time Reference from Variable' field in RSCUR? Would it be one of the 3 mentioned above or something else and why?
Appreciate your valuable advice.
Thanks,
Al

Hi,
Yes I do want to use the Key date from the variable screen and I am using the standard 0FIAR_C03_Q005 with slight modification including currency translation.
As I mentioned in my original post I have several key date variables in this query such as 0P_KEYD2 (based on Posting Date), 0P_KEYDT (based on Net Due Date) and 0P_KEYD3 (based on Clearing Date). My question is which one should I use if I want to base it on the specific key date variable from the variable screen? I need the specific Key Date variable technical name.
Thanks,
Al

Open sales orders key figure in APO

HI Gurus,
Can anyone please throw some light as to where i need to be looking in this scenario. Our BW resource extracts open sales order quantity from ECC and loads into APO DP. The issue that i'm seeing is the open sales order quantity key figure is not getting updated properly in APO. For example to begin with we have a quantity of 800 EA in the period of 12/2014 (we go by fiscal period and in this case 12 would represent September 2014), 01/2015(October 2014), 02/2015(November 2014). The customer service group has deleted the quantity completely from period 12/2014 (September 2014) in ECC. But when i look in the planning book in APO, i can still see the quantities in the periods of 12/2014, 01/2015 and 02/2015. I was expecting the quantity from the period of 12/2014 to not showup in APO as it has been deleted in ECC. Our BW resource also confirms that he has loaded it properly in APO. Where can i start looking to resolve this issue.
Thanks
Ravi

Dear Subhash, Thanks for your reply and i apologize as APO DP is new to me and i'm picking up things, can you please guide me to which tcode should i be going and checking this. Also reloading the planning area can you xplain a little more please
Okay i have checked in the tcode /SAPAPO/TSCUBE and this is setup in the process chain for us which runs once a month on the opening day of the period. I hope this is what you were referring to?
Under the key figure assignment in TSCUBE tcode, i see that the 'Add data" check box is not checked under Target area.

Change order of key figure is not working in Web report output (using WAD)

Hi,
We are using BI 7.0, release 701 and level 008. We are facing problem in WAD (web report output). When ever we do 'Select filter' for key figures and 'change the order' of key figures, it does not get reflected in new order. Though drag and drop of key figures is working.
Though same change order is working fine in Bex Analyser.
Kindly suggest some inputs.
Thanks.

Hi,
On Which Service Pack are you on?WAD has this feature of re arranging the keyfigures in BI 7.0 for SPS 14...
Regards,
Bhagyarekha.

Table for Customer and vendor open balance on a key date

Dear All,
Can anyone please let me know Table for Customer and vendor open balance on a key date. We are developing one customized report.
I have checked with the below table :
Customer-KNC1, KNC3,BSID, BSAD
Vendor-LFC1, LFC3, BSIK, BSAK.
But these are not working properly for all customers and vedors. Also, in open items, there are items with clearing documents.
Plesae let me know, how to go for it.
Please suggest.

Hi
Use BSID and BSIK for open items
And pass company code, year and from date and to date range in Posting date selection option
Reg
Vishnu

C key

Similar Messages

Maybe you are looking for