C-media audio problems

I've been having problems with flash games and animations.
Basically the problem used to be that each time a flash movie/game
would try to play a sound, it would freeze for a second then
continue (playing the sound properly). This would happen almost
every time a sound was played and this was really irritating. I
tried updating my sound drivers to the most recent, and this has
just altered the problem. Now the movie/game freezes for a second
after each sound.
My sound device is (I think) C-Media CM6501. It's a built in
sound card on an Asus M2N-E SLI motherboard and I'm running Windows
Vista. However before this PC I had an Acer laptop with a C-Media
sound card and I was having exactly the same problem. I can't
remember the specific details but it was running Windows XP.
Anyone know what the problem is?

I don't believe it is your sound card problem. I uses a
creative live sound card and also have used the Cmedia on boards
and have the same results that you have/ I myself believe it is a
flash player problem handling the chnageover of sounds. I don't
believe there is volume leveling in the flash player and it floods
the memory used for conversion of sound until it catches up! That
is putting it simply! Loud bass sounds and extremely loud theatre
type sounds seem to cause the hangups. I>E>
watching innertube CSI Miami, and others.

Similar Messages

Bluetooth media audio problem

Hi,
I have a really odd problem with my Sennheiser MM 400–X Headset.
The connection works but when I switch off the Headset while the connection is alive and switch it on afterwards the multimedia audio is very loud and generates an ugly noise effect.
I have to deactivate and activate the media audio connection in the pairing options to repair it.
Any ideas?
Greetings
Michael

Seem only multipoint BT devices have this problem, not sure it is related to the phone, because I noticed exactly the same effect when I connect such a device to any BT 4.0 player. Even the computer. With a BT4.0 dongle I have to reconnect too to make it work and avoid sound delays. WIth 3.0 and lower it's ok on the very same devices. Z1 has 4.0 so.. well.
I also found the app prevents my Sony SBH20 to connect "multimedia audio" profile, so it's good to see I can exclude it now (though I can't see the update yet, I believe it will appear soon). Only I can't use it in landscape mode (docked phone) because the icon is too big to see the button below it, but it is not a big problem, I won't complain, wouldn't dare
Thanks again, great work mate!
When everything have failed already, try to read the manual.
Kudos mean I am helpful. Am I for you? Then support me back

Flash Media Encoder 8 - audio problem

I'm having an audio problem with Flash Media Encoder 8. I am
converting a long Quicktime movie to Flash - about 28 minutes.
After encoding, when I play it back, at about the 20 minute mark
the audio just drops out. I've developed somewhat of a workflow and
have done this with similar Quicktime files many times and have not
had this problem. Does anyone have any ideas as to what may be
happening? Anyone else see this?
Some specs:
Flash 8, Mac OSX 10.4.10, MacBook Pro C2D

Five Pi,
It may have something to do with the audio rate in your QT
video. When using encoder, make sure your audio rate of your QT
file is higher than the audio rate of your Encoder settings.
Its just a guess, I have had the same problems, but I set the
audio quality to very high when exporting from Final Cut Pro, and
then set them to medium quality in encoder, and no more audio
problems.
Steve

Media Player Problem playing only one song at a time

Recently acquired a BB Curve 8330 (OS 4.5.0.127) running on a Bell Enterprise server. I bought a SanDisk 16G Media Card. The card is formatted, the songs are there (about 20 albums) I can view, scroll, choose shuffle, choose an album, choose a artist or any other option. No matter what I try, it will only play one song at a time. Once the song plays, it just stops and stays at the end of the song. Periodically, the entire device will shut down and restart. I saw somewhere else in the forum to pull the battery, wait 1-2 minutes, didn't work. There was also a post to try to downgrade the software from 4.5.0.127, but really, is that necessary?
Is there a fix, patch, upgrade, or other I can try rather than going backwards?
Please help. Really frustrating.

I was having the same problem. I found out the CD's that I ripped were not in MP3 format they were in windows media audio format. I was able to load them to my phone and they would play one at a time or when a song got to the end it would restart my phone. Replaced WMA files with MP3 files and it fixed the problem. Hope this helps.

HOW TO FIX NO AUDIO PROBLEM IN FLASH (4 SOLUTIONS)

This solution is for WINDOWS ONLY!!! Unfortunately I believe
it is a bug in flash itself as I have read more than one instance
of this same no audio problem occuring on MAC'S and LINUX based
systems as well. IF YOU KNOW OF SOLUTIONS TO THE MAC OR LINUX BASED
PROBLEMS, PLEASE POST THEM IN THIS THREAD.
Description of the problem: Video sites such as YouTube,
VideoSift, Break, Google Videos, Yahoo, and a plethora of others do
not stream embedded audio. Viewing a YouTube video, for example, on
VideoSift.com results in the video playing back with no audio.
However, by going directly to YouTube and playing back the same
video, it appears to work.
THERE ARE SEVERAL POSSIBLE SOLUTIONS.
Problem: You may be missing your WAVEMAPPER driver.
Cause: Wavemapper driver was removed during installation or
updating of the Flash Player. It might not necessarily be Flash
that removes it but apparently something does.
Solution #1: Google "Flash No Audio WAVEMAPPER" for
directions, its been covered a bunch, but basically requires
running REGEDIT and readding the WAVEMAPPER key to the appropriate
location and value in the registry. Its not as difficult as it
sounds.
http://weyland.be/wrdprss/index.php/2006/08/22/no-sound-in-macromedia-flash-player-9/
if your wavemapper key is installed correctly...
Possible Cause: Corrupted or damaged flash content preventing
audio streaming from working correctly.
Soltuion #2: Run CC Cleaner and delete only cached Flash
content. It is a free program, again just google "download CC
Cleaner". This particular solution worked for me.
If CC Cleaner also does not work, the description of your
problem may differ slightly. In my case on several computers, one
day it worked, the next day it didnt. If it never worked, this
would be a logical solution for you. One variation of this that I
have found is to create a new Windows User Account and log into it.
The reason the CC Cleaner method may work better is that the User
Accounts have their own separate cache folders so a corrupted cache
preventing audio playback on one profile will not be available on
the other User Account to cause the same problem. I wont explain
how to do this as the CC Cleaner will work better but if you are
curious, yet again google "create new windows user accounts". I
have also seen this method work on one of my affected computers but
it did not fix the issue on the account I was having problems with.
http://www.ccleaner.com Install
and run it, use it only to remove Flash under the Applications Tab,
Multimedia, Adobe Flash Player. Check it and uncheck everything
else, then hit Analyze then Run Cleaner.
Possible Cause: Missing Codec
Solution #2: Download and install the K-Lite Codec pack.
Again, google it. A CODEC stands for COmpressor DECompressor and is
a way to make audio and video files small enough to be transferred
on the internet. There are a lot of different codecs and if you
want to play back a video that was compressed using a particular
codec, you will need that same corresponding codec to decompress
your media source and view its content. Basically if you dont have
a codec, you cant observe the content of the media. If you have a
VCR and want to play back a DVD, you are out of luck unless you get
a DVD Player. DivX and XVid Codecs are some of the very popular
codecs used on the net, but to get those, I still suggest getting
the K-Lite Codec Pack.
http://www.free-codecs.com/download/K_Lite_Codec_Pack.htm
Solution #4: Go back to Flash 7. If it aint broke dont fix
it. This Final alternative is only to be used as a last resort.
You'll have to get rid of Flash 9 and go back to Flash 7. The
really tricky part here is that you have to prevent Flash from auto
updating itself. If you install Flash 7, and hit up YouTube, you'll
immediately get Flash 9+ installed again with the same problems. So
AFTER you uninstall Flash 9 (use Macromedias / Adobes uninstaller,
yet again go google it) make a new text file and name it MMS.CFG,
in the file put this one line "AutoUpdateDisable=1" (without the
quotes) and put it in BOTH your c:\windows\system32 AND
c:\windows\system32\Macromed\Flash folders. This will prevent flash
from Auto Updating to 9+, then have to find some place to download
the old flash 7 installer. I found one here.
http://www.intercomm.com/downloads/Flash7.
Only problem is that most sites will try to make you install Flash
9 and Flash 7 does not work on all sites, but it does on some like
YouTube. DO NOT UPDATE TO FLASH 9+ IF YOU USE THIS METHOD.
You will probably want to IMMEDIATELY go to
http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager05.htm l
after installing Flash 7 and UNCHECK the update feature
I've tried to write this quick little guide at 3AM so Im not
going to take more time to research other ways to fix this problem.
If you have other solutions, such as for MAC and LINUX, or feel
like adding on to something else that I've written here (links
would be useful to the downloads I suggested) or correcting any
mistakes I probably have made, please say so.
One of these solutions is bound to help you. Theres multiple
causes for this no audio problem so there is obviously multiple
fixes.

http://www.omahapokernews.org
http://www.holdempokernews.org
http://www.7cardstudplay.net
http://www.5cardstudplay.net
http://www.holdemspot.org
http://www.texasholdemstate.net
http://www.texasholdemstate.com
http://www.pokerbonuslist.net
http://www.pokerdownloadz.org
http://www.signuppoker.net
http://www.tournamentpokerz.com
http://www.pokercalculatorz.com
http://www.omahaodds.org
http://www.omahaouts.org
http://www.texasholdemrulesonline.net
http://www.onlineholdemtips.com
http://www.pokerhilo.net
http://www.poker-hilo.com
http://www.hilopokers.com
http://www.nolimit-holdempoker.net
http://www.texasholdemlimits.org
http://www.texasholdemlimits.net
http://www.onlinepokerlimits.org
http://www.onlinepokerlimits.net
http://www.onlinepokerlimits.com
http://www.texasholdemlimits.com
http://www.7cardplayer.net
http://www.5cardplayer.net
http://www.omahaacademy.org
http://www.omahapokerrooms.net
http://www.onlinepokerroomstop.net
http://www.playpoker-toppokerrooms.com
http://www.texasholdemz.com
http://www.playpokeronline-casinos.com
http://www.texasholdem-vip.com
http://www.gamble-poker-holdem.com
http://www.playpoker-holdem.com
http://www.onlinetexasholdem-poker.com
http://www.texasholdempokeracademy.com
http://www.vip-texasholdem.com
http://www.playfree-poker-online.com
http://www.texasholdem-pokerrooms.org
http://www.toppokerrooms.ws
http://www.toppokercasino.ws
http://www.onlinepokercasino.ws
http://www.playpoker-online.ws
http://www.online-texasholdem.ws
http://www.play-texas-holdem.ws
http://www.internet-texas-holdem-poker.ws
http://www.poker-player.ws
http://www.luckyschool.com

Firewire audio problems with OS X 10.5.6

Hello,
I’m experiencing audio problems with Firewire 400 on my Macbook running Mac OSX 10.5.6.
I’ve got a 2.4Ghz IntelCore 2 Duo with 4 GB RAM and 59 GB available on the internal HD.
It’s hooked up to a brand new Mackie D.4 mixer with 2 Firewire outputs. The problems occur on both Firewire outputs.
I’ve installed automatically from the software update (which I will never do again) to 10.5.6. I never tried the D.4 with 10.5.5 so I can’t tell if the problems occur there also.
The main problem is that after a couple of minutes of recording the sound starts to break up and get really distorted. After a while the sound comes back again.
The second problem is that Soundtrack Pro or Audacity don’t get any audio input from the D.4, although audio input is clearly visible in System Preferences – Sound.
The only sound program that works with all 14 Firewire channels is Ableton, but also in Ableton the distortion occurs.
An example of the distortion can be checked here:
http://media.kaalslag.com/firewire-distortion-problem-mackieD4+Macbook.mp3
I’ve roamed several forums and sites to solve the problem and I tried these solutions:
I updated again to 10.5.6. with the full combo download from the Apple site. Restarted. Problem still there.
I shut Airport off, because lots of sites mentioned problems with Airport conflicting with audio/firewire. Didn’t work.
I did the work around with shutting the Macbook off, disconnecting the D.4, restarting the Macbook, opening Audio/Midi Setup, connecting the D.4 again, toggling the format frequencies a couple of times. Again, no use.
Right now I’m using my “old” Macbook again to record from vinyl. This one is still running on OSX 10.4.11. No problems so far.
I’ve had the distortion problems occuring before with an USB interface. Hoped that the Mackie Firewire would solve the problem, but it seems now that there’s a serious audio Firewire problem which is still not solved in OSX 10.5.
Any help, tips and/or a work around would be much appreciated. Thanks!

You could try using another computer in Target Disk mode (as an "external HD"), or you can connect the firewire cable and disconnect all other network cables (turning off airport). Then on each computer go to the "Network" system preferences and select "Built-in Firewire" from the list of ports and choose "Manually" from the drop-down menu next to "Configure". Enter the following IP addresses and subnet masks, apply the changes.
_Computer 1_
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
_Computer 2_
IP Address: 192.168.1.2
Subnet Mask: 255.255.255.0
After those ip addresses are entered and you've clicked "Apply", ensure that for both computers you have file sharing enabled (done in the "Sharing" system preferences), and then check the Finder sidebar to see if the computers can see each other (their names should appear under "Shared" in the sidebar--if not, try restarting).
If the computers dont appear (even after restarting), using the "Connect To" option that's available in the Finder's "Go" menu. In there, to connect to another computer enter it's IP address as follows:
afp://IP_ADDRESS
If you're on the computer with the ip address of 192.168.1.1, you would enter 192.168.1.2 as "IP_ADDRESS". The "afp" is the protocol (just like "http" for web), and stands for "Apple Filing Protocol"...Apple's file sharing protocol.

IDVD 4.0.1 audio problems--console log

So, I too am having audio problems in iDVD. Not always, but recently. Audio is recorded for parts, but not all of source from iMovie. Looking at the DiscRecording.log in Console, I see:
iDVD: Burn started, Sun Mar 19 20:48:18 2006
iDVD: Burning to DVD-R media with DAO strategy in MATSHITA DVD-R UJ-825 DAM5 via ATAPI.
iDVD: Requested burn speed was 47x, actual burn speed is 2x.
iDVD: Burn underrun protection is supported, and enabled.
iDVD: Burn finished, Sun Mar 19 21:18:02 2006
iDVD: WARNING: The DiscRec SPI from the DiscRecording framework is deprecated in 10.3 and later.
iDVD: WARNING: This app is contributing to an overall degradation of system performance and should
iDVD: WARNING: be updated to use the DR API instead.
Any ideas on what to do to fix it?
Thanks!
Matt
Powerbook G4 Mac OS X (10.4.5)

Hi Matt
There are so many things that can go wrong.
How did You go from (iMovie?) to iDVD.
- using the Share/export to iDVD from within iDVD
- dropping the project QT movie into an open iDVD theme window ?
Version of OS, iMovie, iDVD and QT ?
What brand of DVD disks ?
Anything connected to Your Mac during burning process ?
Any other programs running under process ?
Yours Bengt W

Adobe Premiere Pro CS5.5 Audio Problem

Hi guys kinda new to Premiere pro, but first time this has even happened to me.
See f ica explian this well.
Ok so i've been editing up loads of gaming footage late all from my Hauppauge Gaming Editon 2. Never had a problem till now, there a clip for some reason the audio is so crazy out of whack its impossable to even try and resync you're self. Like there some bit of it where the near end of the clip auido plays in the for 3 mins then it goes back to being like 20 seconds out of sync. It plays fine in Windows media player and quick time but in adobe it goes NUTS!
All the other cilps are fine just this one clip has gone crazy on me.
Any ideas how to fix this.
Ask away and i'll answer everything i can to the best, need to get this fixed to get this video finish asap...
Thanks.

yea i am using the right sequence
here are 4 screen shots of 2 different things i was editing, both used to record my xbox 360 with Hauppauge, Seems adobe is the only program playing the video file with the audio out of sync/mixed up
[URL=http://imageshack.us/photo/my-images/803/screenshotlrh.png/][IMG]http://img803.imageshack.us/img803/1669/screenshotlrh.png[/IMG][/URL]
[URL=http://imageshack.us/photo/my-images/826/screenshot2yv.png/][IMG]http://img826.imageshack.us/img826/3012/screenshot2yv.png[/IMG][/URL]
[URL=http://imageshack.us/photo/my-images/841/screenshot3aa.png/][IMG]http://img841.imageshack.us/img841/7042/screenshot3aa.png[/IMG][/URL]
[URL=http://imageshack.us/photo/my-images/5/screenshot4on.png/][IMG]http://img5.imageshack.us/img5/6096/screenshot4on.png[/IMG][/URL]
The Yellow Devil May Cry video is the video with the audio problem,
The metal gear rising video is red because of the pic above it, and the sound works ok on that, infact that video is finished and uploaded to youtube now.

Strange audio problem playback

I have what's probably an easy problem but can't find an
answer anywhere here. When using "Play" or using the return key to
preview my project in Flash 8 on OS X, I can't stop the audio. The
audio is an MP3 voice over.
Pressing "Stop" or using the return key again stops the
playhead, but the audio continues no matter what I do. I can go
back to the beginning and play it again, and now I'll have two VOs
going on at once. The only way I can get the audio to stop is by
closing out the project.
This is making timing my animation to match what the VO is
saying very difficult. Any ideas?

I am having the same problem, but only after reinstalling XP
and all my software on a new hard drive. My previous hard drive
hadn't had a fresh install of XP in three years and was giving me
intermittent problems. However my swf's work properly on the old
drive but not the new one. I'm guessing it's one of my updates of
Firefox, flash player (was using 9,0,28,0 but now am 9,0,45,0). My
scenario is complicated because I'm using Flash Media Server, but
again it works on one drive and not the other. The odd thing for me
is that if I create my swf on the new drive with 9,0,45,0 and then
play it back when I boot from the old drive, it still has the same
double audio problem that plays similar to you. My play/pause
button has no effect and the audio just keeps going. If I do pause
the audio and wait for my audio to finish and then hit play again,
my scrubber bar moves but nothing plays until it gets to the end
and starts over. I was also getting double audio at times as well.
Could this be the new player??? Have you figured anything out since
you posted last? I'm using XP, flash 8, Firefox 2.0.0.4.

Solve my corrupted audio problem for $$ and eternal gratitude

My video project has corrupted audio suddenly. I've read about other audio problems when exporting, but all I did was save the project while editing, no export. I have the prefs set to extract audio at pasteover, which I've done a lot of for this 2-camera wedding shoot. I also have the second audio track occasionally used for background music. All three tracks (video, audio 1, audio 2) on the timeline have corrupted audio for the entire length of the project. It sounds like a helicopter whirr was added, it's very choppy. Also, both cpus are maxxed out and the process monitor shows iMovie utilizing 180%+ consistently. When iMovie isn't running, it's in the single digits. As soon as I load iMovie the cpus max out. This hasn't happened the whole project, just recently. So what changed? I don't know. I've been doing the same thing the whole time, the pasteovers, the add titles, the add background track, saving the project every couple of minutes. Each time I've saved, it looks like it's listing off different files or clips, not just the changed clips. I've tried deleting the QT movie it created in the cache and let it recreate to see if that would help, but it didn't. Would deleting the files in the waveform cache help? I've got about 30 hours into this project already and would love to resurrect this audio if possible. Either that or it's Jim Beam and call it a day. I thought this was non-destructive editing, but apparently that's just the originals? That doesn't help much when the whole project audio goes in the toilet and I'm looking at redoing this whole project. Anyone who can fix this is getting a big ol' sloppy kiss on the mouth and an iTunes gift certificate.

I've never personally seen the audio problems you describe, but there's some things I'd try before giving up. As you've probably read, it's not unusual to have playback problems in projects containing complex audio. The odds for it seem to increased in QuickTime 7.
1. Try opening the "TimeLine Movie.mov" that's inside the Cache folder of the project in QuickTime Player. If the audio plays okay there, the audio data is intact and you're seeing a playback anomaly in iMovie. (QuickTime Player may choke too, but don't conclude anything from that.)
To access the movie, Control-click on the project icon and choose "Show Package Contents".
2. Try exporting ONLY the project audio to an AIFF file, then import THAT back into the project and replace the audio you have. That will "flatten" the audio and make it much easier to play. (To be safe, on a copy of the project.)
Or if you have QuickTime Pro, you might try extracting all the audio from the Timeline movie.
To export to an AIFF file, choose File > Export, click on QuickTime, set the popUp menu to "Expert Settings", press Share, then from the top popUp menu, choose "Sound to AIFF". Choose the level of quality you want from the bottom popUp menu, then Save.
What may be going on here is that extracting audio has created MANY audio files in the project, some possibly very large. (Each time we extract audio from a clip that is part of a Media file shared with other clips, iMovie extracts ALL the audio from that Media file, not just the audio of the selected clip.) To see what audio files the project contains, look in the Media folder of the project.
If you get this solved, please say how.
Oh, and if you haven't updated to iMovie 7.1, you might try that. There were improvements in handling multiple audio tracks, I read somewhere.
BTW, it's usually not a good idea to change things inside the project package. iMovie can get pretty confused. The Timeline movie is replaced each time we save, so that's not a big deal.
Karl

My imac wont play any media .audio nor video. im using lion can anyone help me on this. One Love

my imac wont play any media .audio nor video. im using lion can anyone help me on this. One Love

it sounds like a tagging problem, but I'm not sure how to help.... what kind of files are they? Typically, if they are organized properly in WMP, they should organize well in the Zen... go to WMP and try the advanced tag editor.
F

Premier Elements 8 Audio Problem

I just got a new Dell laptop last week that came with the Adobe Photoshop Elements 8 and Premier Elements 8 bundle pre-installed.   I’ve never worked with Premier Elements before and thought I’d try my luck with it yesterday. I edited several movie clips that were taken with my Sony camera in MP4 format, joined the clips into one movie with transitions between them, and rendered the finished product in .mpg format.
The video plays fine in all programs, but the audio is a different story. It is silent in Windows Media Player and Real Player, yet plays well in Windows Media Center and Windows Movie Maker. It also plays on my Dell PC in Windows Media Player (the same program that silences it on my Dell laptop).
I'm a senior citizen and have worked a little bit with Windows Movie Maker but that is all - nothing more intricate than that program. I’d like to burn my new movie file to DVD but would first like to know what is causing the audio problem. I'm hoping it's something simple and that this aged brain can understand the "fix". Any suggestions?
Thank you for any help you can offer me.
Anne

Hello Hunt, and thank you for helping me.
Yes, you have described the problem correctly. In PrElements, all was
well with video and audio - and still is OK in two of the video players I have
on this new laptop.   However, there is no audio in the other two programs
- but only on this Dell laptop in Windows Media Player. There IS audio in
Windows Media Player on my Dell PC. That's what really confuses me.
Yes, the original file from the camera was mp4 and was exported as mpg
(MPEG). I don't remember the settings I used; I think the only thing I
changed was a quality setting. Is there a way of going back and looking at the
original settings to jot down what they were?
I think that the free version of Real Player has improved over the years
and has a few more "goodies" now than it did in previous editions.   For one,
I was able to capture an internet video in its entirety last year, and
very easily. I wanted this video (a show trailer) for a slideshow I was
creating and couldn't figure out how to get it with any other application.
That's the main reason I installed Real Player last week on this new laptop -
"just in case" I want to do this again.
I will take your advice and look into the two free players...
And, in response to your second post, WMM has given me a good start but,
unless I'm missing something, it does not have the capability of burning a
DVD. I will check out the resources link and the Training Series that you
describe, and thank you so much for your help!
Cordially,
Anne
In a message dated 7/1/2011 11:23:58 A.M. Eastern Daylight Time,
[email protected] writes:
Anne,
Welcome to the forum.
Just to make sure that I am following you, I will restate what I think you
are experiencing, and then please correct me. Along the way will be a few
questions too.
You have created a Project in PrElements, and have Imported Video (with
Audio) into the PrE Project. The files from your Sony are in MP4 format.
In PrE you have your Audio, correct?
You have then Exported/Shared that Project to an AV file as an MPEG. Do
you recall the settings chosen for that MPEG?
That Exported/Shared file plays with Audio in some players, but in others
it only plays the Video, but not the Audio. Is that correct?
Knowing the settings used to create that MPEG file might explain why some
player software does a good job, where other players have an issue.
This is an aside comment - I find that WMP, especially the later versions,
is not a good choice for a player. It seems that MicroSooft has done as
much as possible to strip it of most capabilities. Instead, I recommend two
free players,
http://gofree.com/download/Video/Media-Players/vlcmediaplayer.php?gclid=CLW6soS44KkCFQoBbA odO3L2Xg and
http://mpc-hc.sourceforge.net/. Both are excellent, and will play files, that some other players struggle
with. Again, both are free. Because all players are not created equal, I
just go with what works. If you were distributing these files to a client,
that was locked into WMP, especially the newer versions, then addressing the
issue would be worth the detective work. If that was the case, then I
would explore Exporting/Sharing to WMV format, rather than the MPEG.
I have not used RealPlayer in about a decade. I found it to be nearly
useless then, and rather ill-behaved. I will not let it near my computers,
though it has possibly been improved over the years. If you have any RealMedia,
MediaPlayer Classic HC, can be modified with a free plug-in, to allow
that. If you do not have RealMedia files (usually designated by .RM), then I
would not worry about taht. Only install what you need, when you need it. I
would just ignore RealPlayer, since it is installed.
Good luck, and hope that this was helpful. Let us know a bit more about
the MPEG settings, please.
Hunt

Pavilion 751n audio problem

hi all
im having some audio problems with my pavilion 751n PC. it won't play music or sounds. and when i try to play music it says that theres no deice. also when I go to device manager C-media AC97 Audio device its highlighted in yellow and under device status it says "this device cannot start." I've have fully updated my computer and i tried re-installing the device but nothing works. could someody help me please!!!!!!?

The issue seems to be due corrupt audio drivers.
Try reinstalling the drivers using Application Recovery.You can find the instructions in the website below:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&docname=bph07142
You can also try installing the AC 97 drivers from the following link:
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=23&Level=4&Conn=3&DownT...
Hope it resolves the issue

NO audio from laptop speaker when phone connected to Bluetooth with media audio checked

Hey guys, when I connect my Verizon Samsung Galaxy SIII (SGS3) phone through my Toshiba Qosmio x875-Q7280 Windows 7 X64 Bluetooth with media audio checked on my SGS3; for what ever reason there is no audio playing through the speaker when I try to listen to my music and for what ever reason I notice in the recoding tab under Sound my SGS3 profile mic audio bar was moving up and down. When I went in to configure it, I click a check box which played the music that I was playing through the laptop speaker but it sounded all muffled. If anyone can help would very much appreciate it.
Solved!
Go to Solution.

Just wanted to update just incase someone else is have this same problem also, so I manage to solve this on my own my installing a bluetooth driver from Intel. I'm not sure if link posting is allow, so I'll just direct you there. If you google Intel and navigate to their download center, search for Intel® PROSet/Wireless Bluetooth Software for Windows 7* it should have two choice 32 bit and 64 bit. After it finish installing there should be another bluetooth icon in your bottom right tray. Next right click the bluetooth icon and add a new device as you would any other and enable media audio from your connected device (in this case it would be my Samsung Galaxy S 3) and you should be good to go with music or what ever sound coming out through the laptop speaker.

Audio Problems Since Lineup Change

I have Verizon FiOS in Baltimore County MD. Since the lineup change on Oct 1 I've noticed some bizarre audio issues and was curious if others had experienced anything similar. For example I sat down to watch a movie on the new channel for Starz HD and there was no audio at all. Great HD picture though. I switched over to the regular, non-HD Starz channel and the audio was dubbed in Spanish. Quite a few other channels, both HD and digital, have shown similar audio problems. Anyone have any thoughts on this or experiencing similar issues? Thanks for any input.

jpdrummer wrote:
I have Verizon FiOS in Baltimore County MD. Since the lineup change on Oct 1 I've noticed some bizarre audio issues and was curious if others had experienced anything similar. For example I sat down to watch a movie on the new channel for Starz HD and there was no audio at all. Great HD picture though. I switched over to the regular, non-HD Starz channel and the audio was dubbed in Spanish. Quite a few other channels, both HD and digital, have shown similar audio problems. Anyone have any thoughts on this or experiencing similar issues? Thanks for any input.
I'm from Baltimore County as well (Randallstown) and I'm noticing the same thing. If I allow the channel to stay for a while, the picture will black out and I get a 'currently unavailabel' message on my screen. It's beginning to happen to a lot of channels. At first I thought it was just 680 Scr-fi, but now I'm discovering it's happening to just about ALL of the HD channels as well as a good number of SD channels. It's even happening to CNN. Now if I go up one and down one a couple times, sometimes it corrects itself and locks in the sound and picture. But if I change channels, I risk not being able to come back with everything in tact. What receiver are you using? I'm using the QIP 7216 multi-media HD DVR.

C-media audio problems

Similar Messages

Maybe you are looking for