C-Media Line In record

Hi there, just a quickkie. Has the O/B C-Media soundcard got an "auto" audio in level record? I have set the sound properties all through the C-Media device, and am recoerding from the record player to the soundcard. If I set the line in record level to "0", it still records well into the red on the VU meter thingy. Turning the output of the source down makes no difference.
I carnt see anywhere in the settings to adjust the Line in record level manually.
Cheers Chris

Thx reilly. I am using cool edit2000 to do the recording, but have tryed it with total recorder as well. When its recording the source, I can adjust the line level record volume (In windows sound prop), and the sound level from my PC speakers responds accordingly, however, it has no effect on the "VU" meter of the recording software
Its recording into the red, not by a lot, but when the record is played from the source record player thru its own speakers, theres no distortion in the "Louder parts" of the song.
When I have done a recording of the same song onto the PC, as a wave or mp3 files, its distorting at the "Louder" parts.
When recording, I have all the Volume levels in Windows on "0" in the windows sound properties. The sound card still still records the song tho, but at levels a bit higher than I'd like (distorts on playback on Louder parts), and that makes me think that there is "auto" line level record on this soundcard.
Can u suggest another recorder software to try out.
Cheers Chris

Similar Messages

Media from memory recorder goes offline after downloaded to FCP

Hi guys, I just bought a Sony HVR Z5U with the Memory Recording unit. My problem is once I get the media into FCP and turn of the recording unit, the media goes off line, even after saving the project. Is there a setting I don't know about here to save the media within my hard drives so I don't have to keep all footage on the compact flash card?

Apology accepted. I've always Logged and Captured footage from tapes, did the editing, saved the project to a external and it has always been there when I went back to work on it. I didn't know you had to save media from a recorder unit to the external first, because I have never dealt with it before. Thanks for the help.

Creative zen micro line-in recordi

I read a review of the zen micro at CNET.com, and their short video clip tells me that the zen micro has line-in recording. However, nowhere does it state/mention that feature in the zen micro homepage, nor is it mentioned in any other site. I would just like to confirm that the zen micro doesn't have line-in recording...

Yep, the CNET.COM video review did mention about a line-in recording function. But maybe because that video was recorded way before the Zen Micro was actually launched, therefore there was a mix up in information. And so no, Creative Zen Micro does not have a line-in recording function. However, the Zen Neeon and Zen Nano Plus does have line-in recording if you're interested =)

Export Excel Data only causes blank line between 2 lines of records

Hi,
I wrote a complete winform application using CR2008.
For information :
C# Framework 3.5
Windows XP SP2 or Windows Server 2003 SP1
CR2008 SP1
Application allow to preview report. In the preview window (CR activx) there is a "letter icon" to export report in several format.
-RPT
-PDF
-DOC
-XSL
-XSL Data only
When I export with "Excel Data only" format, I always have a blank line between 2 lines of records in Excel.
Is there a way to supress them from VS2008 ?
Thanks a lot for your reply,

Hello, Jonik;
Do you see the same blank lines when you export to Excel Data only in the Crystal Reports designer?
Elaine

Product Request: Line-In Recording for Micro (or a USB Doo-D

I think the Micro would really benefit from that level of functionality.
There are two ways it might work, but I don't know the technical sides...
: the headphone jack is not just a source or dread; it's also Remote-Ready. This may point to additional input uses for the hardware, if there is the firmware to exploit it.
2: a line-in accessory could certainly be attached through the mini-USB jack. Again, the firmware would have to support it, but I would certainly pay for a doo-dad that let me record lectures and whatnot with an external microphone, not to mention the whole "record from a CD player" aspect, great for my numerous partially-scratched disks that my computer refuses to read...
Plus, a USB doo-dad would trans-product - they could be used with all the other players that use the mini-USB jack to transfer data. Anyway, a feature like that is too good to only feature in the N200.

I've just found a Yahoo! Group that discusses audio recording with Creative's Nomad Jukebox 3:
http://grou
ps.
yahoo.com/group/njb3tapers
So that's more proof that there's an interest in that. Maybe not as widespread, but I think one of the reasons the NJB3 was as successful was because of its recording capabilities, because as simple MP3 player it was too big, so it was the extra features such as line-in recording that made it stand up.

Line In Recording Level Adjustment

I am recording from a tape recorder to the hard drive. I have done this a lot over the years. Suddenly I am no longer able to adjust the line in recording level. I have always before gone to Control Panel/Hardware and Sound/Sound (recording tab), Click Line In, then click on Levels. When I adjust the level, either lower or higher, it does nothing to change the sound level. Can aynone please tell me why this feature isn't working any longer on my computer. Could some other setting have gotten changed? Where should I look? Thanks!!!!

Have you tried to discuss it with mixer manufacturer?
I mean they know own product very well and have best experiences with it.
I presume they have tested it on different hardware platforms and different operating systems so I believe they are the right address where you can ask for help.
In control panel you have standard options for sound but maybe you need something specific for connected mixer.

Zen V Plus Line-In Record

I'm recording various shows on TV and Satellite radio by line-in audio recording. Can anyone tell me if the V Plus can charge and record line-in at the same time? If not, how long can it line-in record before the player shuts down? I have the Nano Plus and it's just too much of a drain with the AAA battery -- only recording about /2 hours before it shuts itself off.

it does not charge and record at the same time..
im not sure about the in-line recording battery life though..

Whenever the idoc triggers its contains two lines of record,

Hi Experts,
In my IDOC INFREC.INFRECMASS01 has two segments E1E1NAM and E1E1NEM.Both the Segments has some fields.In that E1E1NEM segment-WERKS contains two valuse, First its coming with 1010. Second its coming with 1014.So its Second line.So whenever the idoc triggers its contains two lines of record, Each i need to update in JDBC At same time.How? Even i tried SplitByValue with ValueChange its not working.... please help....
Advance Thanks
Arun

We are working on IDOC to JDBC scenario.
In my IDOC INFREC.INFRECMASS01 has one segment E1E1NAM( parent segment), inside this parent segment we have one child segment E1E1NEM containing two lines. On the basis of one field WERKS, the child segments should get repeated in the target but in the target side we are getting only one of the values of WERKS .
We have used SPLIT BY VALUE(each value) on WERKS but still only one of the values are coming on the target side .
We are attaching the source xml and the target xml generated from RWB
*Source XML from SXMBMONI :*_
<?xml version="1.0" encoding="UTF-8" ?>
- <INFRECMASS01>
- <IDOC BEGIN="1">
+ <EDI_DC40 SEGMENT="1">
- <E1EINAM SEGMENT="1">
<MSGFN>005</MSGFN>
<INFNR>5300000074</INFNR>
<MATNR>000000000000103260</MATNR>
<LIFNR>0000009000</LIFNR>
<ERDAT>20091116</ERDAT>
<ERNAM>KAPIL</ERNAM>
<MEINS>PK</MEINS>
<UMREZ>10</UMREZ>
<UMREN>1</UMREN>
<TELF1>011-64612814</TELF1>
<MAHN1>0</MAHN1>
<MAHN2>0</MAHN2>
<MAHN3>0</MAHN3>
<URZDT>00000000</URZDT>
<URZLA>IN</URZLA>
<LMEIN>ST</LMEIN>
<REGIO>30</REGIO>
<VABME>1</VABME>
<LTSSF>00000</LTSSF>
<LIFAB>00000000</LIFAB>
<LIFBI>00000000</LIFBI>
<ANZPU>0.000</ANZPU>
<RELIF>X</RELIF>
- <E1EINEM SEGMENT="1">
<MSGFN>005</MSGFN>
<EKORG>1000</EKORG>
<ESOKZ>0</ESOKZ>
<WERKS>1010</WERKS>
<ERDAT>20091116</ERDAT>
<ERNAM>KAPIL</ERNAM>
<EKGRP>101</EKGRP>
<WAERS>INR</WAERS>
<MINBM>0.000</MINBM>
<NORBM>1.000</NORBM>
<APLFZ>0</APLFZ>
<UEBTO>0.0</UEBTO>
<UNTTO>0.0</UNTTO>
<ANGDT>00000000</ANGDT>
<NETPR>0.00</NETPR>
<PEINH>1</PEINH>
<BPRME>PK</BPRME>
<PRDAT>00000000</PRDAT>
<BPUMZ>1</BPUMZ>
<BPUMN>1</BPUMN>
<WEBRE>X</WEBRE>
<EFFPR>0.00</EFFPR>
<MHDRZ>2</MHDRZ>
<BSTMA>0.000</BSTMA>
<STAGING_TIME>0</STAGING_TIME>
</E1EINEM>
- <E1EINEM SEGMENT="1">
<MSGFN>005</MSGFN>
<EKORG>1000</EKORG>
<ESOKZ>0</ESOKZ>
<WERKS>1014</WERKS>
<ERDAT>20091116</ERDAT>
<ERNAM>KAPIL</ERNAM>
<EKGRP>101</EKGRP>
<WAERS>INR</WAERS>
<MINBM>0.000</MINBM>
<NORBM>1.000</NORBM>
<APLFZ>0</APLFZ>
<UEBTO>0.0</UEBTO>
<UNTTO>0.0</UNTTO>
<ANGDT>00000000</ANGDT>
<NETPR>0.00</NETPR>
<PEINH>1</PEINH>
<BPRME>PK</BPRME>
<PRDAT>00000000</PRDAT>
<BPUMZ>1</BPUMZ>
<BPUMN>1</BPUMN>
<WEBRE>X</WEBRE>
<EFFPR>0.00</EFFPR>
<MHDRZ>2</MHDRZ>
<BSTMA>0.000</BSTMA>
<STAGING_TIME>0</STAGING_TIME>
</E1EINEM>
</E1EINAM>
</IDOC>
</INFRECMASS01>
TARGET XML FROM RWB:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_IB_VENDORISL xmlns:ns0="http://VENDORITEMSITELINK_NS">
- <STATEMENTNAME>
- <si_sku_vendor_link ACTION="INSERT">
- <ACCESS>
<Sku_Code>000000000000103260</Sku_Code>
<Location_Code>1010</Location_Code>
<Vendor_Code>0000009000</Vendor_Code>
<Lead_Time>0</Lead_Time>
<Pref_Vendor_Flag>Y</Pref_Vendor_Flag>
<Active_Ind>Y</Active_Ind>
</ACCESS>
</si_sku_vendor_link>
</STATEMENTNAME>
</ns0:MT_IB_VENDORISL>

Zen V plus line in recording with 10 minute tra

I just purchased a zen v plus specifically for recording certain programs using the line in recorder. The programs are generally /2 to 3 hours long. The problem I have is that the line in recorder breaks up the recording into 0 minute tracks. Is there a way to program or adjust the setting,so that it's not broken up into tracks?
Thanks

When you record a track, the recorded track is automatically named LINE followed by the date and time of the recording ( LINE YYYY-MM-DD HH:MM:SS ). For example, if you recorded a track on March 5, 2004 at 2:57 pm, the track is named >LINE 2004-03-5 4:57:00 . You can just extract the recorded track from the player and rename it when you have it connected to your computer.

Line in Recording with Sblive 24

Can anyone recommend the right settings in the surround mixer, For good quality line in recordings? Right now my line in record slider is set at 70%, The line in is 70% and the master is at 70%.
Thankyou for your time.. shaiwill
Windows xp sp2
Sbli've 24bit

shaiwill,
If those volume settings work for you, then those are the right settings. I think one important goal is to set the volume sliders so that you don't clip what you're recording. Some people recommend keeping the volume below 90% to avoid saturation, by which I think they mean clipping, but it depends on the level of the source too. If you can replay your recording source and have the Creative Wavestudio or some other recording software with a volume level meter, then on a first pass you can monitor your recording source and set the volume so that you get all the highs and lows. Then on a second pass, you should be able to make a perfect recording.

Zen V:Turning off SYNC in line-in record

Is there a way to disable the SYNC feature so that the line-in recording doesn't depend on the source level? I just want to run external microphone, via a mixer, into the Zen V line-in and not have the thing create a new track everytime the level drops into and out of the noise.

I think you need all your iCloud contacts to be on, on all devices.
On the iPad, in Contacts, if you tap "Groups" red bookmark in the top left corner, it will bring you to a screen with a sync icon in the bottom left corner. Try tapping that. On the same screen make sure your contacts/address books are checked.

Does line in record in ster

Im looking to buy a Zen V for li've music tapingand am wondering if the line in records in Stereo.
Also- are the recording levels displayed on the screen?
thanks

I will have to wrestle it away from my daughter to check.
As I recall there is a level indicator for the voice recording (with built in mic), but I didn't think it showed that when doing line in recording.
But haven't done recording on it for awhile, when I was helping my daughter do it we always monitored the audio through the headphones while recording.
Will try to check tommorrow.

Can line in record streaming aud

I've never had an mp3 player with line in capabilities. From what I understand, line in recording can be done with CD's, etc... I was curious whether the line in could record streaming audio (such as an internet audio broadcast)? If so, I think this would be an excellent feature that would probably make the GB worthwile over the 52MB even if space wasn't too much of an issue. Thanks!?

Line-in accepts an audio line-in signal not a digital stream. You could plug the sound output from your PC into the line-in and record the stream as it is being played but you might as well just do that on the PC and transfer it as the quality will be better.
PB

Creative Zen V Plus Line In Record

Hi all
I am looking at getting a number of these for my workplace to use primarily as a line in/external mic recording device.
We have trialled a number of HD based recorders in the past; iRi'ver, Cowon but we have found the line in recording standard to be poor.
I was wondering if anyone has one of these and could tell me what the recording standards are like, especially regarding the volume levels of the line in recording?
The iRi'ver and Cowons both have line in recording but the volume level is so low it is pretty useless.
Thanks in advance
Tim

I use my Zen Nano Plus primarily for line in recording directly from sound systems. Line-in recordings are saved as MP3s and you can pick the encoding bitrate, either 96, 28 or 60. The recordings with the built-in microphone are saved as WAV files. I've found that for line-in recordings it's best to put in some headphones and check that the recording level (via volume control) is satisfactory. I've never used any other line-in recorders so I can't provide any comparison. Anyway, I typically use the free version of Wavepad to do an auto gain adjustment on the recordings. Hope I was of some help to you!

Line In Recording Left/Right Channell

I hav an XFi-Titanium. I select the "Audio Record Mode". Then I record something with a Keyboard that's only on the Right-Channel. While I record something I hear nothing. When I stop the recording and play it afterwards, I hear the sound I recorded and its ony Right Channel like I wanted it to be. Line In is switched on and when I put the intrument on both channels I hear Music li've? while playing on the Instrument. If I put the Intrument on the Right Channel I hear nothing while playing li've. Only after recording I hear what I played on the Right Channel. My Question is why I don't hear the Right Channel while playing li've (When the Instrument only outputs a Right Channel sound) and when I record the same thing and then push play on the record programm I hear the right channel. So if I want to edit a multiple track song and for example put a Piano on the right channel I can't hear anything while playing on the Keyboard. I have to record it to hear what I played. So the right channel doesn't work li've. If I switch the Piano Sound to the Left Channel it has the same effect as putting the Piano Sound on both Channels. (I hear the Piano out of both Speakers)
Any Ideas why this isn't working li've, only working after recording?
gargamosch

)Re: Line In Recording Left/Right ChannelleI use Adobe Audition. I played arround with my settings and found out that to mute the right channnel or unmute it does not effect the li've-playback of line in. Only the left Channel (mute / unmute) has an effect. So if I put an Instrument on both channels, both channels go through the left channel while playing. If I put an Instrument only on the rigt Channel I hear nothing. If I put an Instrument only on the Left Channel I can hear it. So for li'veplayback only the left channel works. Recording uses two channels. I found out in the Audio-Creation Console of the Xfi- Titanium that, looking at the Playback Volume Meter, only the left channel shows something, while? the Record Volume Meter shows something on both channels. It seems that the Soundcard handles realtime-playback of line in and recording of line in different. Realtime - playback of line in seems to be mono while line in recording seems to be Stereo. Is there maybe a switch or a setting to get realtime playback of line in to stereo? Is it a driver problem and realtime Stereo isn't supported by line in on the X-fi?
gargamosh

C-Media Line In record

Similar Messages

Maybe you are looking for