C.'\program files hp digital imaging bin hpqstp08.rsc

the moment i turn the computer on  this massage come up imagen incorrect c.'\program files hp digital imaging bin hpqstp08.rsc
i have unintall and intall the software and it still shows error ....
HP HELP PLEASE..................................

Hello roylang,
Your error message is a little confusing. The hpqstp08.rsc file is part of the HP digital imaging software, but what does the error message say? Maybe take a screen shot of it and post it so we can see what it says.
What make / model computer and printer are you using?
What operating system are you using?
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

Similar Messages

  • Photosmart "Parsing error in file c:\Program Files\HP\Digital Imaging\bin\hpqsclock\1033.xml"

    I receive the error message: Photosmart "Parsing error in file c:\Program Files\HP\Digital Imaging\bin\hpqsclock\1033.xml" 
    when I try to open the HP Solution Centre.  I am using Vista.
    Can anyone help please?
    syy

    Thanks.
    I will give this a go.
    Once I have uninstalled the software presumably, I don't use the cd that came with my printer (I have uninstalled and reinstalled using the original CD before) , but can download the software and new drivers direct from the HP site.
    I did try and download updates from there and it said new software for solution centre but when I clicked
    on the downloads they didn't appear to have anything to do with the solution centre.
    Once again thanks for your help
    syy

  • Parsing error in file c:\program files\hp\digital imaging\bin\hpqscloc\1033.xml

    A fenti hibaüzenet jelenik meg, ha meg akarom nyitni a HP Szolgáltató központot.
    Mi a megoldás ?
    The above error message appears when trying to open the HP Solution Center.
    What is the solution?

    Hi if461030,
    Welcome to the HP Forums!
    I see that you are getting a parsing error when trying to open the HP Solution Center.
    I have a few questions for you:
    1.) What type of printer do you have? To find your printer's Product/Model Number follow instructions in this link. Finding Your HP Product Model Number.
    2.) What Operating System are you using? Windows or Mac? What version?
    3.) How is the printer connected? Wireless or USB?
    Hope to hear back, and have a great day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Parsing error in file C:\Program Files (x86)\HP\Digital Imaging\bin\hpqscloc\1033.xml

    The HP Solution Centre has disappeared from my toolbar and we I attempt to open it with the program file I receive the above error

    Hi ... I have the same kind of error message:
    Parsing error in file C:\Program Files (x86)\HP\Digital Imaging\bin\hpqscloc\1033.xml
    Have been searching for a solution, using different sort of key words, no luck so far.
    Anyone here? Many thanks in advance.

  • C:\program files (x86)\hp\digital imaging\bin\background.exe

    c:\program files (x86)\hp\digital imaging\bin\hpqkgrp.exe the application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.
    I never had a problem before with scanning(as copying and printing are not a problem) and I can scan when I right click on the solution center but it does not allow for pdf format...I have tried everything it says on the even log and have unistalled the hp program and then re-installed the program with update and assistant to correct problem and I still cannot get it....PLEASE HELP!

    Hello Quincy62301 ,
    Welcome to the HP Forums.
    I see that you are having some issues with the scanning due to an error code.
    I suggest that we start off by running the HP Print and Scan Doctor.  Please take a screen shot of any error codes or messages so that I can see exactly what you see.
    Write me back and I will be happy to help.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Strange behavior of WindowsIntune / Win8.1 : Repetitively launch C:\Program Files\Microsoft\OnlineManagement\Updates\Bin\omupdclt.exe

    Hi,
    After moving from Win8 to Win8.1 (using WindowsStore update),
    I observed sometimes that some command prompt Windows (ugly black MSDOS Windows) opens / closes Repetitively in my desktop.
    At a moment where the computer was really busy, I was abble to see the title of this black window :
    It was : C:\Program Files\Microsoft\OnlineManagement\Updates\Bin\omupdclt.exe
    Can someone tell me how to prevent this strange behavior ?
    Thanks in advance.
    AC Soft.

    I have also openned a case at WindowsIntune support, and up to now, they replyed me this :
    We have been able to reproduce this issue ourselves. We are currently working with our engineers to identify if there is a way to prevent these command prompts from launching.
    So, while waiting, I Tried your solution.
    On the Win8.1 computer that had the problem, i found an AccoundID value, with { }, and all letters in Uppercase, as described in your solution. So, the problem for me is not that AccountID is not populated...
    When I looked at another Win8.1 computer that had not the problem, i found an AccountID value
    without { }, and with all letters
    in lowercase.
    So I looked at a Win7 Virtual machine that was enroled into intune too, and that obviously didn't had the problem, and I found there an AccountID value without { }, and with all letters in lowercase, same as on the working computer.
    So on the computer that had the problem, I removed the { }, put all letters in lowercase, then run
    %ProgramFiles%\Microsoft\OnlineManagement\Updates\Bin\omupdclt.exe /agentupdatenow
    I rebooted the computer, and now, I wait to see if the problem is solved...
    I will tell you what happened in some days...
    AC Soft.
    That process will not fix this issue.  We have a fix coming in an upcoming service release.  
    Thanks,
    Jon L. - MSFT - This posting is provided "AS IS" with no warranties and confers no rights.

  • Adobe Flash security exposure in HP Solution Center Digital Imaging code

    I have an HP Officejet 4500 with the HP Solution Center installed.
    Windows XP. 
    My security software identifies "Adobe Flash Player Multiple Vulnerabilities" embedded in the HP Digital Imaging product. 
    The versions and locations are:
    Adobe Flash 10.0 r2
    C:\Program Files\HP\Digital Imaging\{7E0E61CC-1C99-429D-BEA7-C4DD5B898D2A}\setup\hwsetupwizard\setup_guide.exe
    Adobe Flash 9.0 r115
    C:\Program Files\HP\Digital Imaging\Help\player\FlashPla.exe
    Apparently the Digital Imaging products uses these for help and setup functions. They were likely installed initially but I can't find any way to update them. I have tried all update functions available for the Solution Center.
    Adobe Flash player is at version 11 as the standalone product on my machine, so this is not the issue. 
    The vulnerabilities are real 
    http://www.securelist.com/en/advisories/43267/?function=advisories&VN=43267
    http://www.securelist.com/en/advisories/41917/?function=advisories&VN=41917
    How do I get these Flash product versions updated? I am assuming if I delete the files the help and setup functions won't work.
    Thanks

    Alright, well.Ltaff, first of all, to let you know Solution Center does not need a different version of Adobe Flash Player. AFP is merely a conduit that puts together the coding for Solution Center so that it can function, and if AFP is not up to date then it can cause problems.
    If you have the most recent version, then those security issues have already been resolved through subsequent releases. Now, what it sounds like is that your security software is falsely detecting issues in the program or AFP was not correctly configured. 
    As a starting step, why don't we uninstall both the printer and Flash Player and reinstall them. 
     First if you use a USB cord, make sure to remove it. Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer. 
    In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it. 
    Then follow this link to download the full feature software and drivers for the printer. You will need to search for the correct model number of the 4500 you have (either G510a/g/n or G509a/g/n): 
    www.hp.com/go/support 
    Then uninstall AFP from Programs and Features and install it from the download :
    http://get.adobe.com/flashplayer/?fpchrome
    Install that and let me know the result! 
    Have a great day!

  • Digital Imaging missing files

    I cannot use scan functions on my Windows 7(64) PC .  I have used the Print and Scan Doctor and have downloaded, installed and unistalled many times the newest drivers.  The uninstall/install hangs up because a file (or more) is corrupted or missing.  The last message referred to C:\ProgramFiles(x86)\HP\Digital Imaging\bin\hpotradd.dll.  I think I need to install Digital Imaging to replace or repair the missing files and simply trying to install the newest drivers doesn't work.  Is there an ability to download and install just Digital Imaging?  I have the printer installed on a local network and the printer functions work fine on my Windows 7 (64) laptop. 

    Hi @Literal1 
    I would like to help you with your Digital imaging. The best think to do is perform a complete comprehensive uninstall and reinstall of the full feature software and driver.
    Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
    Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
    Download the software and choose to save as, save to desktop  >PS_AIO_06_C309g-m_USW_Full_Win_WW_140_175-4.exe
    After the software downloads and extracts, open the temp folder again, use the instructions from step 1.
    Look for, and open the folder starting with 7z (Example: 7zS2356)
    Open folder Util
    Open folder CCC
    If you have an HP computer run the L3uninstall.exe. If you have anon-HP computer run the L4uninstall.exe
    When the uninstall has completed restart the computer
    Follow these steps to reset the registry settings and options for Windows Installer.
    Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
    In the Open box, type msiexec /unregister, and then click OK.
    Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
    In the Open box, type msiexec /regserver, and then click OK
     *Note: there is a space between the c and the /
    If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
    Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
    Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayer/downloads.html
    Restart the computer
    Download and run the Microsoft Fix it tool. What it fixes;
    Corrupted registry keys on 64-bit operating systems
    Corrupted registry keys that control the update data
    Problems that prevent new programs from being installed
    Problems that prevent existing programs from being completely uninstalled or updated
    Problems that block you from uninstalling a program through the Add or Remove Programs (or Programs and Features) item in Control Panel
    Turn off the Real-Time Scanning and Firewalls; The image below is a McAfee example, if you have a different antivirus program and need help disabling Real-Time Scanning and Firewalls let me know.
     Image source
    Download and run the HP Printer Install Wizard for Windows
    The HP Printer Install Wizard for Window was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer.
    I look forward to hearing back from you.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Where is the Lenovo Factory Image stored - and what is c:\program files\ unknown ?

    Working with an X61s running XP Pro SP3.
    We are using a third party program (Ghost) to do our own image backups.  These are coming in larger than expected so I began by doing a disk cleanup, emptying recycle bin, temp files etc.  After those steps...
    Properties for Drive C show 35.5 G out of 160 used.
    However, when I add up any folders off the root that have more than .5G I get 29.7 G.
    That leaves 6 G unaccounted for.
    I have check Lenovo's Restore and Recovery function and it is OFF and has been off as soon as we started working with the machine.  When I open that program, it shows no files available... so apparently(?) none where made.
    There is a 5G Fat 32 partition that I assume is Lenovo's factory image file.  That partition is not part of the Ghost Image.
    I ran WinDirStat and found a file that IS a 5.9 G file located under Program Files which shows in WinDirStat as c:\Program Files\<unknown>.
    If I open Windows Explorer, the total files under Program Files equals the total for the individual folders under Program Files (EXCLUDING the "unknown")... so the "unknown" folder does not show up in Windows Explorer... only in WinDirStat... and in the image files I create with Ghost.
    Any one know if this 5.9G "unknown" file has anything to do with Lenovo's many built in programs?  Suggestions welcome.

    After the above post I found out that this is not the image file, but are the window recovery point files.
    If you want to knock this down in size (in my case, I was getting huge image backups because of it) you can right click on My Computer, select properties, select the system restore tab and reduce the %of the drive that can be allocated to system restore files.
    Note that this will limit how far back you can go to select a restore point... so check how far back you can go now... then reduce the allocation a bit.... and check it again.  Continue to reduce it until you have a compromise between the age of the recovery points you can go back to, and the size of the allocation. 
    Hope that helps.

  • While trying to run it show error message : "The application or DLL C:\Program Files\Mozilla Firefox\sqlite3.dll is not a valid Windows image. Please check this against your installation diskette

    Just updated firefox. While trying to run it show error message : "The application or DLL C:\Program Files\Mozilla Firefox\sqlite3.dll is not a valid Windows image. Please check this against your installation diskette." Tried to download and install new firefox, but it alway show that the file is corrupt
    == Today ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; InfoPath.2)

    Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    You can skip the step to create a new profile, that is not necessary for this issue.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • I can't get new version of itunes to install on Windows 7 64 bit computer. Receive message that reads insufficient privileges to access c:\program files\ipod\bin. Tried to follow some suggestions found here but nothing is working. Any new suggestions?

    I can't get new version of itunes to install on Windows 7 64 bit computer. Receive message that reads insufficient privileges to access c:\program files\ipod\bin. I've followed several threads I've read here but nothing is working.

    For such situation, I'd suggest the following:
    1. Remove current installed office with the fix-it tool in
    KB2739501, and follow the "Remove Office manually" section to make sure there are no remaining files
    2. Either download a trial version of Office 2013 from
    http://office.microsoft.com/, or from
    http://technet.microsoft.com/en-us/evalcenter/jj937170
    3. Reboot your computer in clean boot mode, and run setup again
    Max Meng
    TechNet Community Support

  • I have no directory "C:\Program Files (x86)\MSBuild\12.0\bin"

    I installed and few times reinstalled Visual Studio 2013 Community Update 4 from ISO and web installer, SHA-1 is correct. However every time installation process didn't create this directory (also its subdirectories and included files):
    C:\Program Files (x86)\MSBuild\12.0\bin
    In registry I have entries about MSBuild 12.0 including path to mentioned directories (...\bin and ...\bin\_amd64). Also during creation of project I receive errors:
    "Unable to read project... The imported project... C:\Program Files (x86)\MSBuild\12.0\bin\Microsoft.Common.targets was not found. Confirm..."
    It's understandable, because I have only these files and subdirectories in C:\Program Files (x86)\MSBuild\12.0:
    Microsoft.Common.props, Microsoft.VisualStudioVersion.v12.Common.props, Microsoft.Common.Targets (directory and its subdirectory: "ImportAfter" that includes files: Microsoft.VisualStudio.ReleaseManagement.BuildInfo.ImportAfter.Targets, Microsoft.VisualStudio.Silverlight.SDKTools.targets).
    I don't have subdirectory: ...\bin and its content.
    I tried install Microsoft Build Tools 2013 but without result. Everything I did on Administrator account on Windows 7 x64.
    I don't want to reinstall OS, so could anyone send me entire directory: "C:\Program Files (x86)\MSBuild\12.0\bin" (with subdirectories and msbuild.exes (x86, x64))?

    Hello starjacker0,
    I have a new installed Visual Studio which installed Visual Studio 2013 and I can see the folder you showed. Hence, I think your problem is pending on your installation and I recommend we focus on this installation problem first.(I'm not allowed to send
    you these files on the forum.)
    Please navigate to your %temp% folder and find the following logs out:
    Or you can use  http://aka.ms/vscollect 
    to gather the installation logs. After using it, you will find vslogs.cab from %temp% folder. Please upload the file to OneDrive and share the link for me, I will help you analyze this file. The log can tell us the reason why it cannot create files under
    that folder.
    If you have collected the logs, please try clear your %temp% folder and restart the MSBuild installation. I suspect VS installer cannot overwrite the %temp% folder which may cause your problem. However, you know, without logs I'm also not sure of the reason.
    Best regards,
    Barry
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • When i click on the Firefox icon I get an error message, C:\Program Files\Java\jre6\lib\deploy\jqs\ff\..\..\..\..\bin\jqsnotify\.exe cannot be found. What is it? and how do i fix it? in English

    When i click on the icon to open Firefox an error message box appears with the following message, C:\Program Files\Java\jre6\lib\deploy\jqs\ff\..\..\..\..\bin\jqsnotify\.exe cannot be found. It then advises me to use the Search function, but the search function says it is unavailable.
    What is it? and how do I fix it? in English

    See:
    http://www.java.com/en/download/help/quickstarter.xml - What is Java Quick Starter (JQS)? What is the benefit of running JQS? - 6.0

  • C:\Program Files\Java\jre7\bin

    I have java installed on my sytem.but when i try to run sql developer it says j2se sdk not found in the path C:\Program Files\Java\jre7\bin
    C:\Windows\system32>java -version
    java version "1.7.0"
    Java(TM) SE Runtime Environment (build 1.7.0-b147)
    Java HotSpot(TM) 64-Bit Server VM (build 21.0-b17, mixed mode)
    (code}
    how should i get the path of j2se sdk                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

    >
    java version "1.7.0"
    >
    Don't use Java 1.7 with sql developer. There have been many problem reports (search the forum) and it is recommended that you use no later than a 1.6 Java version.

  • XML Schemas & XML SCHEMA COLLECTIONS: XSD.exe & the tool in C:\Program Files (x86)\Microsoft SDKs\Windows\v7..0A\Bin\x64?.

    Hi all,
    I just read Pages 346-348 of the book "Microsoft SQL Server 2012 Bible" written by A. Jorgensen, P. LeBlanc, J. Chinchilla, J. Segarra & A. Nelson (published by Wiley) regarding XML Schemas and XML SCHEMA COLLECTIONS: Step 1.  create and
    save orderxml.xml
    <Order OrderID="1">
    <Item>
    <ItemNumber>V001</ItemNumber>
    <Quantity>1</Quantity>
    <Price>299.99</Price>
    </Item>
    </Order>
    Step 2.  using the tool in the following location:
    C:\Program Files (x86)\Microsoft SDKs\Windows\v7.0A\Bin\x64
    Open a command prompt, and navigate the preceding directory. The syntax for creating schema is: Xsd.exe C:\temp\orderxml.xml /outputdirectory:c:\temp  to create the orderxml.xsd file.  
    Step 3. Copy all the contents of the orderxml.xsd file to the clipboard, and create a new query window in SQL Server Management Studio, pasting in the content of the clipboard. To create the XML Schema Collection, you need to add the CREATE XML SCHEMA COLLECTION
    statement to the beginning of the schema as shown below:
    --MSss2012bibleP348.sql for XML Schema Collection OrderInformationSchemaCollection
    -- Copied and executed by SHC (Date & Time): 24 April 2015 8:05 AM
    USE ScottChangDB
    GO
    Create XML SCHEMA COLLECTION OrderInformationCollection AS
    N'<?xml version="1.0" encoding="utf-16"?>
    <xs:schema id="NewDataSet" xmlns="" xmlns:xs="http://www.w3.org/2001/XMLSchema"
    xmlns:msdata="urn:schema-microsoft-com:xml-msdata">
    <xs:element name="Order">
    <xs:sequence>
    <xs:element name="Item" minOccurs="0" maxOccurs="unbounded".
    <xs:complexType>
    <xs:sequence>
    <xs:element name="ItemNumber" type="xs:string" minOccurs="0" />
    <xs:element name="Quantity" type="xs:string" minOccurs="0" />
    <xs:element name="price" type="xs:string" minOccurs="0" />
    </xs:sequence>
    </xs:complexType>
    </xs:element>
    </xs:sequence>
    <xs:attribute name="OrderID" type="xs:string" />
    </xs:complexType>
    </xs:element>
    <xs:element name="NewDataSet" msdata" msdata:IsDataSet="true"
    msdata:UseCurrentLocale="true">
    <xs:complexType>
    <xs:choice minOccurs="0" maxOccurs="unbounded'>
    <xs:element ref="Order" />
    </xs:choice>
    </xs:complexType>
    </xs:element>
    </xs:schema>' ;
    /* Apply it to the table/columns */
    ALTER TABLE ItemInfo
    ALTER COLUMN ItemData xml (OrderInformationCollection)
    GO
    I prepared (i) the orderxml.xml file for Step 1 and Step 2, and (ii) the MSss2012bibleP348.sql file for Step 3. But I am not sure that I can do the Steps (i) and (ii) in my PC that does not have the regular version of Microsoft SQL Server 2012 and Microsoft
    Visual Studio 2012. Furthermore, I  have difficulties to do Step 2 and Step 3 in my PC that is the part of Windows 7 Lan Computer System in my office: I navigated to my C:\Program Files (x86)\Microsoft SDKs\v7.0A\Bin\, I did not see the x64
    thing in the  Bin folder, but, I saw the xsd.exe in the Bin folder. If I click the xsd.exe and I get the following in the bottom of the PC screen:   
    xsd.exe Date modified:12/122011 12:55 PM    Date created:  12/12/2011  12:55 PM
    Applicaion    Size:81.8 KB
    Also, I see my PC screen flashes (and it looks like a dialog box with black background to flash for me to type the command) quickly. I am lost completely in this step and I don't understand the whole thing in doing Step 1, Step 2, and Step 3
    I briefly summarized/described/presented above.
    I need the following help from the experts of XML Schemas and XML Schema Collections in Microsoft SQL Server 2012 Management Studio:
    Help #1: I don't understan the concept of Step 1, Step2 and Step 3 to do XML Schema, XSD.exe, and XML Schema Collection in the SQL Server 2012!!?? I just have the SQL Server 2012 Management Studio (SSMS2012) in my PC.
    Help #2: How can I execute the xsd.exe in my C:\Program Files  (x86)\Microsoft SDKs\Windows\v7.0A\Bin\ folder?
    Help #3: I just learned the basic things of creating XML SCHEMA COLLECTIONS in my SSMS2012 directly. Is the MSss2012P348.sql (I created and presented above) right for the task? How can I use clipboard to create the XML Schema Collection in my ScottChangDB
    database?
    Please kindly help and give me the answers/comments for Help #1, Help #2 and Help #3.
    Thanks in advance,
    Scott Chang  

    Hi Scott,
    Help #1: I don't understan the concept of Step 1, Step2 and Step 3 to do XML Schema, XSD.exe, and XML Schema Collection in the SQL Server 2012!!?? I just have the SQL Server 2012 Management Studio (SSMS2012) in my PC.
    Step1 and Step2 not that related to SQL Server, you can get the XSD from a given XML with an online XSD generator.
    Google search: XSD generator
    Help #2: How can I execute the xsd.exe in my C:\Program Files  (x86)\Microsoft SDKs\Windows\v7.0A\Bin\ folder?
    Please see the link in the #1
    Help #3: I just learned the basic things of creating XML SCHEMA COLLECTIONS in my SSMS2012 directly. Is the MSss2012P348.sql (I created and presented above) right for the task? How can I use clipboard to create the XML Schema Collection in
    my ScottChangDB database?
    See the syntax and example in
    create XML schema collection
    If you have any question, feel free to let me know.
    Eric Zhang
    TechNet Community Support

Maybe you are looking for