C-Project Status Error

Hi,
Need help,
User release the project but it still show created in Basic data view,and if we check the change Document tab page it shows Project is Released.
And we check the status from Dropdown Release option is not there only Canceled and Completed.
Thanks
Sunil Jawalkar

Hi ,
No Project is not Released , we checked the sap table entry it shows Created.
And phase immediate to Project number is also in Create- inactive.
Thanks

Similar Messages

Set Project status error Activity 000005012744 0010 No changes possible bec

Hi All,
I am getting this error on RPM "Activity 000005012742 0010: No changes possible because of status CLSD" after setting project status to Complete Technically or Closed. I could not change the status to any other status when set to these two statuses.
I tried looking for custom implementation in the BADIs but unfortunately breakpoint is not triggered on any of the BADIs. Is this a configuration issue?
Thanks and I hope someone can help me.
Renz
Edited by: Jorenz.Llanes on Jul 5, 2011 8:43 AM

I found out that the activity of a project should be released first before setting a status to the Project level after which is applied to the project hierarchy.

Project Status Report - cProjects 4.0 - Run time error

Under Basic Settings, I go to 'Forms for Printing and for Project Status Reports'. Here, under 'Create PDF-Based Forms', I select the form 'DPR_STATUS_REPORT_AIF' and Activate it. I then get to 'Activate Forms per project type'.I get to 'New Entries' and add 'DPR_STATUS_REPORT_AIF' and also set the 'Active' and 'Status Rpt' checked.
When I get to cProjects front end, I see the 'Project Status Report' template under the 'Status Report' tab. However, when I click on the 'Preview' button, I get to see a dump.
"The following error text was processed in the system SRP : WebDynpro Exception: SOAP Framework error: SOAP Runtime Exception: CSoapExceptionTransport : HTTP send returned with status code(100.101)"
Can someone please suggest how to get something useful at the click of the preview button?
Thanks.

Hi,
Yes your basis team should tell you more about this. ADS Credential needs to be installed on the java stack of your cProjects Server. For this you will have to send a message to SAP requesting for the ADS Credential. You will then receive a credential file with its password.
However not all servers support ADS. There is a list of server names that support ADS. You can get the server name on which cProjects is installed from your basis team and I shall let you know if it is supported or not. You can also have a look at in the PAM (Product availability Matrix) for SAP NetWeaver 2004s - Additional Components at http://service.sap.com/pam
Regards,
Reema.
<i>Pl award all useful answers.</i>

Error in Demo-Appl. 'Project Status'

Reporting an error:
Project Status Demo. When I try to add a new task to a project, I get:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small ORA-06512: at "CBOURBOU.PROJSTAT_TASKS_BIU", line 4 ORA-04088: error during execution of trigger 'CBOURBOU.PROJSTAT_TASKS_BIU'
Regards
Tino

i'm pretty sure that the cause of your error is that your userid is longer than 30 characters when you're logged in and trying to create a new task. all the projstat_tasks_biu trigger does is set the last_update_user, last_update_date, and task_id values for projstat_task table. last_update_user is defined in that projstat_tasks table as a varchar2(30), so you'll get that error for sure with a long userid when the trigger does a ":new.last_update_user := v('USER');". try either modifying your table or creating tasks while logged in with a shorter userid and let us know if you still have issues.
regards,
raj

Media encoder status error CS4

I cant get my CS4 projects to encode!
Media encoder gives me a status error. (yellow triangle in the status column) When I open the text file I get:
- Source File: C:\Users\Andrew\AppData\Local\Temp\denis final CS4_1.prproj
- Output File: E:\Sequence 01.wav
- Preset Used: Windows Waveform 48kHz 16-bit
- Video:
- Audio:
- Bitrate:
- Encoding Time: 649:51:33
8/25/2009 9:10:49 AM : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
Other info:
-Vista 64bit,
-Adobe creative Suite CS4. Premiere CS4 4.1.0
-It wont encode anything, I've tried a few projects, the above one was an export of audio timeline.
-The project "denis final CS4.prproj" is actually in my "E:" drive
-A renamed project called "denis final CS4_1.prproj" (created by CS4 I assume) does in fact exist in "C:\Users\Andrew\AppData\Local\Temp\"
-I am unable to deactivate Premiere CS4 . It allows me to deactivate successfully, but comes up active next time I run.
Any ideas?
thanks,
Andy

Here's what I get after a few minutes of being in the encoder. Nothing actually starts encoding:
- Source File: /Users/user/Library/Caches/TemporaryItems/Wedding.prproj
- Output File: /Users/user/Video/Projects/Wedding/DVD/_Wedding.mpg
- Preset Used: Export Widescreen DVD 7Mbps CBR
- Video:
- Audio:
- Bitrate:
- Encoding Time: 00:12:19
Sun Dec 20 15:56:11 2009 : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
Is there an error code in there?

Cannot save comments in Project Status Report

Hi,
I am trying to save comments in Project status report by typing in the comments box and then pressing the save button. The pdf file gets saved successfully, but when I open the saved pdf file the comments I typed before are not there(not saved).
Please note that I am using the standard project status report.
Could anybody guide me on this?
Thanks
Edited by: hemant vaidya on May 26, 2008 5:26 AM

Hello,
is there any error text given by cProjects?
Have you had a look on the ADS side's logfiles?
Are you using the right credentials?
Maybe this could be a good point to start. Otherwise your description is not detailed enough to go on...
Greetings, Max

Project Status Report - cProjects 4.0

Hi all,
I am using cProjects 4.0.
After selecting the PDF Print form DPR_STATUS_REPORT_AIF for the project type and marking 'Active' and 'Status' report checkboxes, when I go to create Status reports, I can see the template "Project Status Report". However, when I click on the "Preview" button, I get a runtime error saying
"The following error text was processed in the system DRP : WebDynpro Exception: SOAP Framework error: SOAP Runtime Exception: CSoapExceptionTransport : HTTP server replied with status code 500(100.101). "
Can someone suggest please?

Hi,
Are you able to open any other pdf forms in cProjects. for eg. approval document?
I guess you need to get the exact location of error.
After the system gives a dump, run transaction ST22 and get the program/function name where the error is actaully occuring.
Regards,
Reema.
PS. pl. award points to all useful answers.

Cannot load project status report in cprojects on portal

Hi,
I have checked all the FP_* adobe test programs and my ADS is working fine. I did test my form in ECC transaction code sfp and the form loads properly.
But, when I try to load the project status report(same form) through portal (cprojects)it is giving me connection timeout error.
Could somebody guide me?
Thanks.

Hello,
there can be several reasons why the Statusreport does not come up
a) ACF component is not installed correctly
Check as described in note [766191|https://service.sap.com/sap/support/notes/766191] if the ACF is installed correctly
b) ADS is not set up correctly
Check as described in note [944221|https://service.sap.com/sap/support/notes/944221] if the ADS is installed correctly
c) cProjects config for the status reports is not set up correctly
Check as described in note [978997|https://service.sap.com/sap/support/notes/978997] if your system is set up according to the configuration guide
Best Regards, Andrea
Edited by: Andrea Langlotz on Jun 11, 2008 8:55 AM

Cannot see project status report pdf inside cprojects using Firefox

Hi,
I am using firefox software to view project status report in cprojects. It shows me blank.
But if I view Approval document, the pdf shows correct in the browser.
As you might be aware,Please note these pdf reports display inside the webpage area,so please donot reply with solutions of opening pdf in separate browser window etc.
Please help

Hi,
Are you able to open any other pdf forms in cProjects. for eg. approval document?
I guess you need to get the exact location of error.
After the system gives a dump, run transaction ST22 and get the program/function name where the error is actaully occuring.
Regards,
Reema.
PS. pl. award points to all useful answers.

CProjects Project status report not generated

Hi
I am facing problem of getting Project status report for a project in cProjects 4.0
I am at client side and accessing the IDES ECC6.Her I am trying for getting Project status report for the project created.
The error I am getting is :
"WebDynpro Exception: ADS: Request start time: Thu Aug 21 16:53:27 GMT+03:00 2008(200,101). "
In customizing for cProjects I have used the std. form available for the same, activated the same for the project type and when tried to get the report I got the above mentioned error.
Then in se38 I executed the programme FP_TEST_IA_01 the result was :
ADS: Request start time: Thu Aug 21 17:23:42 GMT+03:00 2008(200,101)
Also I have activated the following services
SICF->Services->default_host->sap->bc->fp and fpads, both are active.
But still I am not getting project status report from cProjects.
Please guide me what else should I do to get the project status report?
Thanks and Regards,
Niraj Sikligar

Hi Reema,
Its great to hear from you.
I have run the report : FP_PDF_TEST_00
Out put is :
Version Information: 705.20060620101936.310918
What does that mean ?
Secondly,
I have checked RFC destination for ADS the results were as shown below:
On Technical Settings tab page :
target host: ides
Path prefix: /AdobeDocumentServices/Config?style=rpc
Is this OK?
Is there anything else to be done?
Regards,
Niraj Sikligar

Function Module to set project status in CJ02.

Dear Team,
Is there any Function Module or BAPI to set project status in CJ02.
Please Help.
Thanks in advance,
Sai

Thanks a lot.
This will serve half of my pupose.
I am looking for setting status of WBS element of aproject definition in CJ02.
Do we have any BAPI or FM for the same.
Actually My purpose is to pool the error log as recording a BDC while closing the status of a WBS element.
Thanks in advance.

Unable to commit the project status change

Dear Experts,
I am developing a utility program to change the status of multiple projects at once.
I am changing the status of Phase, task, check list,check list item and Project status from
Create to Release, release to Complete and to Work Effor Complete.With respective status change BAPIS.
when ever the projects is not able to change the status success fully due to validations
such as person respondsble not mainted or any other basic data is missing,
We are not committing the changes if every thing goes fine we are commiting with BAPI: BAPI_CPROJECTS_COMMIT_WORK
but when we commit with this it still retaining the previous project status in LUW and trying to commit previous project too.
and commit is getting failed.
I am not able to roll back or free the project with BAPI:BAPI_CPROJECTS_ROLLBACK_WORK and BAPI_BUS2172_FREE
BAPI_CPROJECTS_ROLLBACK_WORK: when iam trying to use this BAPI it is going to short dump
BAPI_BUS2172_FREE: It is returing error saying unable to free the project.
Could you please tell how to roll back the changes to the project or how to commit only success full projects (Project with out any errors in status change.)
Kindly do the needful
Thanking you.
-ravi

Program flow
Loop at It_Project
*Status Change for Check List
CALL FUNCTION 'BAPI_BUS2176_SET_STATUS'
    EXPORTING
      checklist_guid                = p_guid
IV_STATUS_PROFILE             =
     is_business_transaction       = lv_bus_trans
     TABLES
         return                    = t_return.
*Status Change for task
CALL FUNCTION 'BAPI_BUS2175_SET_STATUS'
    EXPORTING
      task_guid               = p_guid
      is_business_transaction = lv_bus_trans
    TABLES
      return                  = t_return.
*Status Change for project
CALL FUNCTION 'BAPI_BUS2172_SET_STATUS'
      EXPORTING
        project_definition_guid = p_guid
        is_business_transaction = lv_bus_trans
      TABLES
        return                  = t_return.
If there is a sucess in changing the status.
CALL FUNCTION 'BAPI_CPROJECTS_COMMIT_WORK'
    TABLES
      return = t_creturn.
Else.
    CALL FUNCTION 'BAPI_CPROJECTS_ROLLBACK_WORK'
      TABLES
        return = t_rreturn.
Endif.
Endloop.
In the above code when we are executing BAPI_CPROJECTS_ROLLBACK_WORK is going for dump.
If we simply commit with BAPI_CPROJECTS_COMMIT_WORK for all the projects then if any project
commits with error same error is re produced for all the following projectsid (unable to destroy the LUW).
and in CRM we can't use 'BAPI_TRANSACTION_ROLLBACK'.

"Unable to Open Project File" - error

Does anyone know how to resolve an "Unable to Open Project File" - error. I accidentally shut down my computer wrong, although Final Cut wasn't open.

Welcome to the forums.
The project file might have gotten corrupted. Look for the AUTOSAVE VAULT (typically in the DOCUMENTS>FINAL CUT PRO DOCUMENTS folder) and open the most recent version. Copy it to your main project folder if it works.
If not, then try trashing your prefs with FCP Rescue.
Shane

Searching for a Project status = CLSD and open purchase orders?

Hi,
I am searching for a project status (Project Builder CJ20N) which allowed my to set a CLSD or a simillar status for settlement with open purchase orders.
This staus should allowed to process with open orders BUT not allowed to add new orders after setting this status.
Have somebody any idee? Or it is impossible?
Tahnk you in advanced for your Help.
Regards Baldy

Hi TV-kid,
while I was waiting for an answer I got to the same conclusion, so what you offers me is quite tempting actually.
I got a look to your website and it seems convincing. Still though, your case studies are in other business area, It's only a mater of good knowledge of File Maker.
I did download the test-drive last version of File Maker plus their samll Business Solution. I did read most of the documentation and the learning process would be too long to construct ourself a good crossed-data base.
I'd like to get in contact with you to look for a possible colaboration. to get private, I'd liketo do it through your contact link in your website .
To whom shall I write?
Thanks
Cheers
Cheers

Status error in workflow while changing personnel admin in pa30

HI,
I have created a leave request in PA30, so that a workflow has to trigger, for personnel admin i am using custom rule for agent selection. I am following error in inbox instead of work item.
Workflow 1712 set to status ERROR
Please repair the suspended workflow
Context Information:
ID: 1712
Work Item Text: hd
User: WF-BATCH
Language: E
SAP System: SCD
Client: 200
Press 'Execute' to display the workflow that has errors.

hi,
Thanks for the reply.
I am getting error messages as follows;
1. error when starting workitem 000000001791
2. error when processing node 0000000018
3. error when creating a component of type step
4. error when creatind a work item
5. agent determination for step 0000000018 failed
6. Error in the evaluation of expression '&EMPLOYEET<???>.ADMINISTRATOR.ADMINISTRATORGROUP&' for item
7. Error when determining attribute 'ADMINISTRATOR' of object instance '[BO.EMPLOYEET.]'
8. Error in the evaluation of expression '&EMPLOYEET<???>.ADMINISTRATOR.ADMINISTRATOR&' for item '10
9. Error when determining attribute 'ADMINISTRATOR' of object instance '[BO.EMPLOYEET.]'
10. Work item 000000001791: Object FLOWITEM method EXECUTE cannot be executed
The exceptions are,
process_node, create, create_wim_handle, create_via_wfm, execute, cl_swf_bnd_binding->execute, get_value_ref, eval_bor_atrrib_access-code.
I have used the method approveinteractive in task in custom workflow and also custom rule for agent selection. I did binding between the mentioned employeet.admingrp ,,, to the variables declared in rule container.

C-Project Status Error

Similar Messages

Maybe you are looking for