C Run Time error on Itunes Software Update. Now I have No ITunes
Running Windows XP. The setup file for ITunes is incorrectly setting something and causing multiple run time errors when I try and run setup or relaunch ITunes.
Is there a way to reload an older version and where do I get it. Or where's the fix for the current ITunes push
Usually, when I get the error message "Problem with Windows Installer Package" and then "QuickTime required", I just go back to using my old version. This time the old version got uninstalled and now I am iTunes-less!
Let's try a standalone QuickTime.msi install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe, and select "Extract to iTunesSetup". WinRAR will expand the contents of the file into a folder called "iTunesSetup".
Go into the folder and doubleclick the QuickTime.msi to do a standalone QuickTime install.
Does it install properly for you? If so, does an iTunes install go through properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)
Similar Messages
-
TS1424 Run Time error in itunes store search
When I click on the search box in the itunes store I get this error:
Run Time error
Program c:\programfile(x86)\itunes\itunes.exe
R6025
pure virtual function call
I have tried re-installing itunes to see if the error corrects itself. Any ideas?Wow, and an overwhelming silence from Apple...... Way to support your clients!
-
I keep getting a run time error when trying to update to the current software.
It says that the connection has timed out? I have tried a renaming the file but that does not work either? any help?
Some possibilities:
You are on a network that blocks streaming content or otherwise won't let you access it
You have restrictions set to block some content (Settings App, General, Resrrictions). -
admin status changed to standard,currently no admin,what to do!?
Please take these steps to restore administrator privileges to your account. This somewhat tedious procedure is only necessary if you've confirmed that no administrator account exists on the system.
If you don't already have a current backup of all your data, you must back up before taking any of the steps below. Ask if you need guidance. You won't need the backup unless something goes wrong—which is always possible.
Step 1
Start up in Recovery mode. The OS X Utilities screen will appear.
Step 2
Take this step only if you use FileVault 2. Launch Disk Utility, then select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main screen.
Step 3
Select
Utilities ▹ Terminal
from the menu bar. In the window that opens, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens. Select your startup volume if not already selected. Pull down the menu labeled
Select the user account
and select
System Administrator (root)
Follow the prompts to set a password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9. I suggest you write down the password. If you don't write it down and forget it, you'll have to start over from Step 1.
Select
▹ Restart...
from the menu bar.
Step 4
This step, like Step 2, applies only if you use FileVault. Log in as usual, then select
▹ Log Out...
from the menu bar, or press the key combination shift-command-Q. Don't restart. You'll be returned to the login screen.
Step 5
At the login screen, click Other... Enter "root" (without the quotes) in the Name field, and enter the password you set in Step 3 in the Password field. You should now be logged in as root. This is a potentially dangerous condition. Do nothing while logged in as root except as indicated below. You'll be fine as long as you don't deviate from the plan.
Open the Users & Groups preference pane. Select your usual administrator account in the list of users and check the box marked
Allow user to administer this computer
You'll be prompted to restart. Do that and log in as yourself—not as root. Your administrator status should now be restored.
Step 6 (optional, but recommended)
Follow the instructions in this support article under the heading "Disable the root user." You must authenticate in Directory Utility as "root" with the password you set in Step 3. Authenticating as another administrator won't work.
Credit for this idea to ASC member wessongroup. -
I have an Access 2000 database that links to tables in an Oracle 9i.
I am trying the following code in a form:
Dim conn As ADODB.Connection
Set conn = New ADODB.Connection
Dim rst As ADODB.Recordset
conn.Open "Provider=MSDASQL.1;" & _
"Password=pdwhere;" & _
"Persist Security Info=True;" & _
"User ID=uidhere;" & _
"Data Source=dev"
Set rst = New ADODB.Recordset
rst.Open "SELECT * FROM tblSurvey", CurrentProject.Connection, adOpenDynamic, adLockOptimistic
rst.AddNew
rst!Counter = 375
rst!Project# = Me.cboProject.Value
rst!PARCEL# = Me.cboParcel.Value
rst.Update
rst.Close
Set rst = Nothing
It seems that at the rst.addnew I get the following error:
run-time error '-2147217911 (80040e09)': Cannot update. Database object is read-only.
What am I doing wrong?Hi,
Please understand speedresearch is a third party software. The error is more related to software. It is recommended contacting speedresearch to get more specialized
support.
http://www.speedresearch.com/contact.asp
Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
From Windows 7 side, I suggest you perform the
clean boot, reinstall program in compatibility mode to check
the result. When registering file, please open an elevated command prompt. Also, you could perform system restore.
Best Regards,
Niki
Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Run Time error in MIGO Posting
Dear Friends,
While Posting MIGO against a import PO system throws run time error for a particular plant. I have created 2 plants for the same company code. But first plant does not have any problem. Pl help me and let me know what may be the cause and its solution. No conditions maintained for the Vendor. After PO directly user creating MIGO.
Regards,
AshokPl find the Run Time error of Exception while posting. Before posting Document was OK while checking.
Runtime Errors MESSAGE_TYPE_X
Date and Time 11.01.2011 10:34:16
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Error analysis
Short text of error message:
Operation QM14 not available for this lot
Long text of error message:
Diagnosis
The desired operation does not fit the inspection lot (object
type).
System Response
The operation is not permitted and can therefore not be carried
out.
Procedure
Technical information about the message:
Message class....... "QV"
Number.............. 224
Variable 1.......... "QM14"
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Trigger Location of Runtime Error
Program SAPLMBWL
Include LMBWLU21
Row 62
Module type (FUNCTION)
Module Name MB_POST_GOODS_MOVEMENT
Source Code Extract
Line SourceCde
32 * BKPF as well. There is no other way to forward XBLNR to FI as not
33 * every document is posted by MB_CREATE -> a new function module in
34 * MBWL for transferring the information, called by FI, meant to load
35 * the complete function group for all MBxx postings when this isn't
36 * required (Performance). Would be the better way to transport the
37 * information after switching off MBxx in later release.
38 * corresponding IMPORT ... FROM MEMORY ... can be found in
39 * AC_DOCUMENT_POST (FORM FI_DOCUMENT_PREPARE (LFACIF5D))
40 l_mem_id = 'MKPF-XBLNR'. " 641365
41 EXPORT xblnr = xblnr_sd TO MEMORY ID l_mem_id. " 641365
42 ELSE. "1245374
43 l_mem_id = 'MKPF-XBLNR'. "1245374
44 FREE MEMORY ID l_mem_id. "1245374
45 ENDIF.
46 IF xmkpf-xabln IS INITIAL. "note 434093
47 CALL FUNCTION 'MB_XAB_NUMBER_GET'. "note 434093
48 ENDIF. "note 434093
49
50 ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_01 SPOTS ES_SAPLMBWL STATIC.
ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_02 SPOTS ES_SAPLMBWL.
CALL FUNCTION 'MB_CREATE_MATERIAL_DOCUMENT_UT'
EXCEPTIONS
error_message = 4.
As soon as we have started to put things into UPDATE TASK, w
ensure that errors definitely terminate the transaction.
MESSAGE A is not sufficient because it can be catched from
external callers which COMMIT WORK afterwards, resulting in
incomplete updates. Read note 385830 for the full story.
IF NOT sy-subrc IS INITIAL.
MESSAGE ID sy-msgid TYPE x NUMBER sy-msgno WITH
sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
MESSAGE A263.
ENDIF.
Optische Archivierung
Spaete Erfassung mit Barcode
Redesign of barcode handling -> note 780365
PERFORM barcode_update(sapmm07m) USING xmkpf-mblnr
xmkpf-mjahr
barcode.
MOVE-CORRESPONDING xmkpf TO emkpf.
CALL FUNCTION 'MB_MOVEMENTS_REFRESH'
EXCEPTIONS
error_message = 4.
MOVE-CORRESPONDING xmkpf TO emkpf.
CALL FUNCTION 'MB_MOVEMENTS_REFRESH'
EXCEPTIONS
error_message = 4.
IF NOT sy-subrc IS INITIAL.
Regards,
Ashok -
XL reporter launching in SAP 8.81 PL:00: run time error
Hello experts,
We have a customer who is on SAP 8.81 PL:00.
They are trying to use XL reporter but when they try using XL reporter, they get:
Run time Error 91
The system then freezes.
Have checked they have Microsoft.net 1.1 which they do and that they have the correct excel.exe config file which they do.
Any suggestions or known faults with 8.81?
Thank you in advance,
AndyHi Andrew,
'Object reference not set to an instance of an object ' is a known error, this usually happens because there was a previous install of the same add on which was not uninstalled completely. This can cause the error.
I would suggest you to go through sap notes 1247315, 1287193. These all suggests about run time errors, cleaning registry files and clean install etc.
Hope it helps
regards
Johnson -
I keep trying to update itunes but it gives me a run time error and tells me to uninstall and then reinstall. It is driving me crazy. Any suggestions?
Hi, I had this problem too and Barton (bless you) has said
1. go to C:\ programe files(x86) itunes & c:programesfiles/itunes. look for all .dll iles
2. QT movie.DLL ( I didn't have this file) and all .dll files. and move to the desk top.
I did any file that had a .dll after it.
3. reboot your computer.
4. Uninstall Itunes and anything that is related with Apple. eg Quicktime,Bonjour. what ever says Apple is the publisher.
5. Reboot computer
6. go to Itunes and down load again.
This fixed my computer and it took me 3 days until a remote assistant guys that I used for another problem told me to go on community Itunes.
I tried a few of the suggestions but had trouble following but this is pretty simple even for me.
Good luck -
After updating my iTunes per the update notice I received a run-time error R6034. Now I am unable to access iTunes at all.
Can someone tell me how to correct this problem?Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I recently allowed an iTune update to be downloaded to my PC. SInce then I'm getting a Run time Error "R6034 An application has made an attempt to load the C runtime library incorrectly." Then I cannot run iTunes. I tried "fixing" it, "Un-installing and re-installing iTunes. Still getting the same message and not able to run iTunes.
Follow the directions of tt2 in https://discussions.apple.com/thread/5822086 and note to run as admin
-
I am getting run time error 6034 after updating iTunes to new version.Any help?
I am getting run time error 6034 after updating iTunes to new version.Any help?
I tried different ways to resolve it like uninstall/install itunes
I am also getting error message on iTunes helper.exeHi isush!
I have an article for you that will help you troubleshoot this issue:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Thanks for coming to the Apple Support Communities!
Cheers,
Braden -
Help! Everytime I try to update my iPad 2 on 4.3.3 it get is error message "The iPad "iPad" cannot be restored at this time because the iPad software update server could not be contacted or is temporarily unavailable." I dont know why please help.
I'm running 4.3.3 on a ipad 2 im computer is connected via wire to internetSee
iOS 5: Updating your device to iOS 5
http://support.apple.com/kb/HT4972
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
Tip - You may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. After you update to iOS 5.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
have uninstalled iTunes 2-3 times (following given order of itune, apple software update, apple mobile device, bonjou, apple applic suuport), turn off the computer, downloaded and reinstalled itune, have windows 7. WHen I execute iTune get run Time error Microsoft Visual C++ library, application has to shut down. Havne't been able to synch iphone / ipad for 2 months. Very frustrated
3 times I uninstalled (itune, apple mobile device, bonjour, quick time a few other things that I don't remember now). I deleted Itune, Ipad from program files, and program files/ common files. Emptied the recyle bin , turned off the computer, turned on, and insalled the latest version. I either got the Microsoft visual C++ run time error when I clicked on iTunes icon OR, if I was lucky, I would be able to open Itune, but it will tell me
This iPod cannot be used because the required software is not installed.
I searched specificaly for the error message, and one person (I wish I could go back and thank him), suggested first to download to hard drive the iTune exe file, then after turning off the computer, to turn on the computer, don't open any Apps, disconnect your nextwork, Switch off the secutiry Software (I think this did it for me), and then instal iTune.
Now, I have to add one more thing, the time that it worked for me, some how, when I turned off the computer, it did some 15 updates (window updates), I have window 7.0, now whether these updates corrected some issues or whether turning off the security software helped, I can't tell, but it installed the iTune, and it recognizes both my iphone and ipad. -
(The iPhone "Named" cannot be restored at this time because the iPhone software update server could not be contacted or is temporarily unavailable.)
can anyone help me with this issue, every time i try to restore it will come up like this error message.Restore the iPhone when connected to iTunes by cable.
Still the same TS1275?
Is your iPhone jailbroken?
Or
Has your computer ever been used to jailbrake or downgrade (Tinyumbrella) any iPhone? -
Run time error message when I try to open itunes?
I cannot open itunes afte using it for 3 years. I receive a run time error message.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT) as you start iTunes, then going to Edit > Preferences > Store and turing off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2
Maybe you are looking for
-
Mac Pro Monitor recommendations
Hi Just acquired new Apple Mac Pro 3.7GHz 3.7 GHz ME253 Quad-Core INTEL XEON E5 12GB 256GB PCIe. For general use. Looking at " https://www.dabs.com/products/benq-bl3200pt-32--2560x1440-4ms-dvi-d-hdmi-display port-speakers-ips-led-monitor-9G7F.html?re
-
HT4436 can't delete name in icloud
Message: Couldn't delete (NAME) Dialog.Error.Text.Contact.DESTRROY.NOT_FOUND
-
Can i change the location for backup in my widows 7 ?
How can i change the location for the bacup in my windows 7?Thanks.
-
Changing delivery note on material document
Hello! We have booked some material documents with a wrong delivery note. Is it possible to change the document number without canceling the material documents? Thanks Markus
-
FPN configured for message server port
Hello, I would like to configure my Consumer Portal to connect to my Producer on port :8101 (the default message server port of the Producer). However, each time I try with this conifguration FPN breaks and nothing works - can't browse the PCD or se