C-Series Merged files issue

C-series merged files issue...
Question # 1 Can we delete these merged files?
Question # 2 What if we use third party software to delete these files?
Question # 3 If nokia updates the software of the device (C2-03), then is it possible that device will work fine?
Question # 4 Is it possible to reinstall the software without restoring backup files in the PC suite?
Question # 5 Is it possible to install an app in memory card in the device (C2-03)?
Question # 6 what is the alternative way to restore all default setting in the device (C2-03)?
Question # 7 Why nokia does not provide a guide that give some guidelines instead of creating, messages, making calls and playing music stuff like that?
C-Series drawbacks

Brian,
If you're able to, I would really encourage you to attend the 2day class as it will provide you with the tools you need to do exactly what you are asking. However, if you are not able to attend an instructor-led training, we offer virtual classroom training as well that may provide the information you're looking for as well. Please visit http://training.ironport.com for a schedule and description of class offerings
Charles

Similar Messages

Gaps In between Letters Of Full Words When Merging Files To Single .pdf Adobe Acrobat 9.3.4 Pro

Setup
Windows XP SP3 + Office 2007 Pro
Also, tested on Windows 7 64x + Office 2007 Pro
Same Issues.
The steps used are:
1) Open Adobe Acrobat 9.0
2) Click File
3) Combine
4) Merge Files into a single PDF
5) Add Files (select the required files)
6) Combine Files (which then processes and creates single PDF)
Results:
A single PDF is then created and as mentioned is occasionally affected by this issue of random gaps appearing within words.
Expected results:
A single PDF with the same formatting and layout as the original files.
I can not post screenshots of this issue for sercurity concerns but here is an example.
From my word document / or pdf (either way)
Drawing Contents
Fabrication Notes
Bill of Materials
Assembly Notes
Top Assembly Drawing
Bottom Assembly Drawing
Schematics
After the Merging of the files
Drawing Contents
Fabri ation ote
Bi of Materia
A emb y ote
Top A emb y Drawing
Bottom A emb y Drawing
S hemati
Seems like "C" "S" "N" "L" 's are missing
EDIT: isn't constant, so its just not these letters its random
Note: Tested this issue with Acrobat 8, and did not have this issue.
Please Help
Message was edited by: Bitzan

Thanks for the response.
I have checked though the Word documents that were used in the most recent merge. They don't have any spaces at these areas or strange formatting. I turned on the Show/Hide option to confirm if there was anything odd but I could not see anything. The formatting (Ctrl+D) shows the default font Arial, Regular, font 12.
The interesting thing is that if it occurs and attempt another file merge the gaps are no longer there. Which makes me think this is unlikely to be the documents and formatting being used and more likely to be a bug in Adobe Acrobat.
Is there anything else that might be of use to know?

Gaps inbetween letters of full words when Merging files to single PDF (Adobe Acrobat 9.0 Standard)

I've raised a Bug Report although it says that I may not be contacted so thought someone else might have encountered this issue and hopefully knows what causes it and how to fix. Any advise would be greatly appreciated. Heres a copy of the Bug Report details...
******BUG******
Concise problem statement:
An intermitent issue is occuring when merging multiple files into a single PDF in Adobe Acrobat 9.0 Standard, the resulting PDF file has gaps inbetween the letters of actual words. For example the word "document" may appear in part of the PDF as "doc ument". This seems to affect various parts of the final PDF file.
Setup: Windows XP SP2, Adobe Acrobat 9.0, Microsoft Office Standard Edition 2003
Steps to reproduce bug:
I am currently unable to replicate the issue on demand but this has happened three times since installing Adobe Acrobat 9.0 a month ago. The most recent occurance happened when merging 6 Microsoft Word Documents. It is a real problem due to the fact that every PDF created needs to be carefully checked and in some cases these PDFs have hundreds of pages.
The steps used are:
1) Open Adobe Acrobat 9.0
2) Click File
3) Combine
4) Merge Files into a single PDF
5) Add Files (select the required files)
6) Combine Files (which then processes and creates single PDF)
Results:
A single PDF is then created and as mentioned is occasionally affected by this issue of random gaps appearing within words.
Expected results:
A single PDF with the same formatting and layout as the original files.

Thanks for the response.
I have checked though the Word documents that were used in the most recent merge. They don't have any spaces at these areas or strange formatting. I turned on the Show/Hide option to confirm if there was anything odd but I could not see anything. The formatting (Ctrl+D) shows the default font Arial, Regular, font 12.
The interesting thing is that if it occurs and attempt another file merge the gaps are no longer there. Which makes me think this is unlikely to be the documents and formatting being used and more likely to be a bug in Adobe Acrobat.
Is there anything else that might be of use to know?

Merge files...... pick file dynamically Based on your content

Hi All,
In my current scenario I have 2 dependent sources (Proxy and File system) from which data is being sent to a common target service. The sources are dependent on Proxy/ECC to File System. Please let me know how I need to pick the file from File system because lot of files are there in File System. Based on my ECC/Proxy message details on field of ABN, according ABN number I need to be pick the file from the File system but I have lot of files in File system. Please let me know how to pick multiple files from one correct file based on my first file message.
After that picking the files I need merge the two messages and send to target file system.
Using fork I can merge files, no issues. But here problem to pick file dynamically Based on content .
Please provide your input......
Regards,
Ramesh

Hi Ramesh Sir,
You can go for JAVA Type Message Mapping.
ECC - > JAVA BASED MESSAGE MAPPING ( HERE WE WILL PERFORM FILE LOOKUP) - > RECEIVER .
Is This approach sounds fisible to you ?
Please provide Sender DataType XML / Receiver DataType XML + any 1 csv file in which lookup has to perform.
and this approach is only possible , if your Flat file is on FTP Server which is on the same network.
Regards
Prabhat Sharma.

Citrix mapped drives and crystals merged files

Has anybody come across an issue with Citrix mapped drives and crystals merged files.
I have updated the crystal DLL's my application uses to 11.5 and created a new setup kit to distribute my app including these new DLLu2019s along with a merged file call crstalreports11_5_net_2005.msm the Visual Studio setup app added. The installation runs fine on the Citrix server and application runs as well. When I come to run any report on the Citrix server I get an error u201Cprocedure call or argument is not validu201D. If I remove the mapping to the drives the reports run without any errors.
I need to keep the mapped drives on Citrix so removing the mappings is not really a solution to my problem (which is a shame really)
I am using Visual Studio 2005, Crystal Report XI and Citrix 4.5
Any help would be gratefully received

See if Process Monitor will help you trace down to where this is happening. Process Monitor can be downloaded from here:
http://technet.microsoft.com/en-ca/sysinternals/bb896645.aspx
Make sure you filter for your process name as Proc Mon creates rather large log files. Once you have a log, search for errors such as Access Denied, etc.
Ludek

Lock Box File issue

I in the process of trying to test the lockbox upload and I was hoping someone could help me on this file issue.
the bank is providing the file as below for the "6" and the "4" record
620000100000480351220002470375406600000000014936CONCISYS INCORPORATE20111026
42000016019                     901293890        0000048035
my issue is I cannot get SAP to match the invoice number becuase of the spaces.     If I remove the spaces from the fil SAP will l match the invoice and clear the invoice. The bank is giving me the file in a Fixed Length format.
I have also tried the file this way
620300100000455000759116030755701208000000279048SIGNICAST           20120117
4203001601900000018000606470000045500
sap does not like the extra "0" in the fields.
I am indicating the file is a BAI2.
Any insight would help.

Hi,
If your file is in BAI2, this is the format, For Record type 6 :
Here for example the Check total amount is 15670.89
Data Type     Length     Description
NUMC     1     Record Type for Lockbox     6
NUMC     3     Batch Number for Lockbox (Bundle Number)     001
NUMC     3     Batch Item Number for Lockbox     001
NUMC     10     Remittance Amount (Check total Amount) for Lockbox     0001567089
CHAR     9     Remitter Identifier 1: Transit Routing Number for Lockbox (Customer' bank transit routing number)     111000614
CHAR     10     Remitter Identifier 2: Account Number for Lockbox (customer bank account number)      0000000000
NUMC     9     Check Number     000014801
CHAR     35     Data Element Type CHAR Length 35     ENERFLEXENERGYSYSTEMINC
For above example the record type 6 should be:
600100100015670891110006140000000000000014801ENERFLEXENERGYSYSTEMINC
And for Record type 4:
For below mentioned example:
Invoice number is - 1800000001 (But total character space is 16, as this field is CHARACTER in nature so we will add 0's at the end)
Invoice amount - 15670.89
Deduction amount - 0
Data Type     Length     Description
NUMC     1     Record Type for Lockbox     4
NUMC     3     Batch Number for Lockbox (Bundle Number)     001
NUMC     3     Batch Item Number for Lockbox     001
NUMC     1     Type of Overflow(Recd Type 4 Still Belongs to a Recd Type 6)     6
NUMC     2     Sequence Number - Serial Number of Record Type 4     01
NUMC     1     End Indicator ('9' the Last Record of a Type 4 Series)     9
CHAR     16     Invoice number     1800000001000000
NUMC     10     Payment Amount     0001567089
NUMC     10     Deduction amount     0000000000
CHAR     3     External Reason Code for Payment Differences     000
CHAR     30     30 Characters
The record 4 should be:
40010016019180000000100000000015670890000000000000
Assuming that its a first and last record in 4, that means 1 invoice and 1 check only.
Sometimes instead of using zeros bank uses space, the choice can be yours. You can tell the bank that you want zeros instead of space. I am also working on Lockbox and already did several testing by creating mock files. Create your own mock files and see how your system is responding. Then ask bank to follow the same.
For rest of the records like RT 1, 2, 5, 7, 8, 9, you will get the standard BAI2 format from SE12 - Database - FLB01, FLB02, FLB05, FLB26, FLB24, FLB07, FLB08, FLB09. Create some FI invoices in B70 and create your mock files using the standard BAI2 format. upload the file using FLB2 and test it. Test with different scenarios like within tolerance, w/o tolerance, with reason code etc
Thanks
Meha

Acrobat and InDesign CS5 file issue

Hi everyone...
My issue is that Acrobat won't or can't convert InDesign CS5 files. It opens Illustrator and Photoshop and converts them to pdf's but not InDesign.
I've tried everything. I've even tried Adobe tech help. No luck. It was a relatively easy procedure in CS4, not to mention a time saver.
Is there someone that knows how to resolve this? Please help as I'm desperate to avoid having to convert all my InDesign files one at a time.

Hi Matthew-
Our workflow often involves combining multiple IND files into a pdf. With CS4, we merely opened acrobat, clicked "Merge Files into a Single PDF" and dropped in the indesign files we wished to combine. Presto- we had one PDF with all IND files put together without having to go through indesign.
In response to your post, I only have CS5 installed, and it seems as though Acrobat doesn't recognize ID CS5 as a program at all. I believe I am current on all InDesign and Acrobat 9 updates to date - I'm running InDesign7.0.2 and Acrobat 9.3.4.
When trying to open IND files through Acrobat, Acrobat launches and gives an error message that states: "Please select a file created by an application that resides on your computer."
Acrobat can't call InDesign CS5 to open at all. Could this be because Acrobat was not updated along with the CS5 suite and therefore doesn't recognize the new CS5 Indesign files?
I read another blog that mentioned it could be a registry problem- they ran CCleaner and ran the registry fix. Then uninstalled and reinstalled both Acrobat and Indesign. What are your thoughts on this method? It's hard for me to try this on my own, as it requires an administrative login- our IT department has us locked out. I would like another opinion before I ask them to help.
Do you forsee a fix from Adobe in the future?
Thanks for your help!
-Julie

Powershell not merging files

Hi there,
I am literally hours new at Powershell scripting. I took on a project of developing a process that would scan a folder for presence of files matching a specific pattern:
fileprefix.MMDDYYY.[a-z].dat (please note regex [a-z] where a to z represents presence of a single letter only followed by file extension .dat).
So far I was able to come up with the code below:
## List of files available in target folder:
## asodent.20140829.a.dat, asodent.20140829.b.dat, asophys.20140827.a.dat, asophys.20140827.b.dat, asophys.20140827.c.dat
$asodent = @(); $asoinst = @(); $asopharm = @(); $asophrm = @();$asophys = @()
$filetype = @()
$date = ("{0:yyyy-MM-dd}" -f (get-date)) -replace "-",""
## file suffixes
$asodent_sufx =@(); $asoinst_sufx =@(); $asopharm_sufx =@(); $asophrm_sufx =@(); $asophys_sufx =@()
## 1 - Code defining and assigning suffixes values here
Foreach($filename in $Filelist){
if ($filename -like "asodent.*")
$asodent += ,$filename
$asodent_sufx = -join ($asodent_sufx + (($filename -replace('\.','-')) -split "(-)")[4])
$filetype += ,(($filename -replace('\.','-')) -split "(-)")[0]
elseif ($filename -like "asoinst.*")
$asoinst += ,$filename
$asoinst_sufx = -join ($asoinst_sufx + (($filename -replace('\.','-')) -split "(-)")[4])
$filetype += ,(($filename -replace('\.','-')) -split "(-)")[0]
elseif ($filename -like "asopharm.*")
$asopharm += ,$filename
$asopharm_sufx = -join ($asopharm_sufx + (($filename -replace('\.','-')) -split "(-)")[4])
$filetype += ,(($filename -replace('\.','-')) -split "(-)")[0]
elseif ($filename -like "asophrm.*")
$asophrm += ,$filename
$asophrm_sufx = -join ($asophrm_sufx + (($filename -replace('\.','-')) -split "(-)")[4])
$filetype += ,(($filename -replace('\.','-')) -split "(-)")[0]
else{
$asophys += ,$filename;
$asophys_sufx = -join ($asophys_sufx + (($filename -replace('\.','-')) -split "(-)")[4])
$filetype += ,(($filename -replace('\.','-')) -split "(-)")[0]
## 2 - Determinig available file types to process based on process above (step 1)
$filetype = $filetype | select -uniq
## 3 - Stitching files together based on available types (see prior step)
Foreach ($type in $filetype)
if ($type = "asodent"){$suffix = $asodent_sufx}
elseif($type = "asoinst"){$suffix = $asoinst_sufx}
elseif($type = "asopharm_sufx"){$suffix = $asopharm_sufx}
elseif($type = "asophrm_sufx"){$suffix = $asophrm_sufx}
else{$suffix = $asophys_sufx}
$combinedfile = $type + "."+ $date + "." + $suffix + ".dat"
$string = $type +".*"
Get-ChildItem | Where-Object {(-not $_.PSIsContainer) -and $_.Name -like $string} |
% { Get-Content $_ -ReadCount 0 |
Add-Content .\$combinedfile }
cls
Write-Host "Process complete !"
Read-Host
I am having issues getting the script above to merge provided files (see script for details). It stops stitching them together after the first merge is processed. It does not complete the process by processing the second merge operation. Is there
anything I am missing that is causing the script to stop the process halfway? (it shows "Process complete" even though it did not kick off the second stitching operation).
Any help would be truly appreciated

Hi Tshindaye,
The script below is for your reference, which can merge the files based on the same prefix and the date time and create a new file under D:\:
$dats=Get-ChildItem d:\ -Recurse|where{$_.name -match "\w.\d{8}.[a-z].dat"}|sort name #filter the files with the format and sort the files
$cont=@()
$match=""
for ($i = 0; $i -lt $dats.Count; $i++){
$m1=$dats[$i].basename.split(".")
if ($m1[0] -eq $match.split(".")[0] -and $m1[1] -eq $match.split(".")[1]){ #filter the merge files based on the same prefix and date time in filename.
$des+=$m1[2] # create the destination file path
$cont+=Get-Content $dats[$i].fullname -ReadCount 0
if ($dats[$i+1] -ne $null){
$m2=$dats[$i+1].basename.split(".")
if ($m2[0] -ne $match.split(".")[0] -and $m2[1] -ne $match.split(".")[1]){ # if the next file is not equal the reference file
$newfile = $des+".dat"
$cont|add-content $newfile # merge content to D:\aaa.20140828.ab.dat
$cont=@() }
else {$newfile = $des+".dat"
$cont|add-content $newfile # merge content to D:\aaa.20140828.ab.dat #if this file is the last one in the array $dats then merge these files
$cont=@()}
else {
$match = $dats[$i].basename
$des="D:\"+$match
$cont=Get-Content $dats[$i].fullname -ReadCount 0}
The script above maybe not the best one, however, this script can filter all the files based on the specific foramt under D:\, and merge these files to a new one like:
The filtered files under D:\:
D:\test\4\asodent.20140827.c.dat
D:\test\4\asodent.20140829.a.dat
D:\test\asodent.20140829.b.dat
D:\test\1\asophys.20140827.a.dat
D:\test\4\asophys.20140827.b.dat
D:\test\4\asophys.20140827.c.dat
The merged files:
D:\asodent.20140829.ab.dat
D:\asophys.20140827.abc.dat
If there is anything else regarding this issue, please feel free to post back.
If you have any feedback on our support, please click here.
Best Regards,
Anna Wang
TechNet Community Support

Command line compiler (rhcl.exe) adds on rogue full pathways into [Merge Files] of .hhp

I'm using RH 9 and generating chm outputs on my Win 7 64-bit computer.
I have a core chm help file and several sub chm helps that get merged into it.
I have a batch file that regularly compiles our help files locally and then copies them into a common local directory. It then copies them up to a mapped network drive where they are picked up by the nightly build of our installer.
The problem I have, is that the command line compiler (rhcl.exe) is adding on a full pathway for all the sub helps listed in the [Merge Files] section of the core help's .hhp file, causing these problems:
1) First of all, the pathways are wrong. The pathway it puts on is from the location of my .xpj file of my core help project. The output directory for the compiler is actually sending all the helps to a different local directory.
2) These need to be relative, and should not have full pathways. The full pathways make it so that when I click on a subhelp TOC entry that subhelp's topic opens up in an entirely different window instead of merged into the core help's window. (See #13 on Peter's helpful site here about the problem with absolute paths: http://www.grainge.org/pages/authoring/rh9/using_rh9.htm)
Here' what I want it to look like (the good):
[MERGE FILES]
pcdmisportable.chm
pcdmistutor.chm
pcdmisvision.chm
pcdmislaser.chm
pcdmiscmm.chm
pcdmisUJB.chm
pcdbasic.chm
toolkitmodulesvwmp.chm
pcdmisdci.chm
toolkitmodules.chm
pcdmisnc.chm
pcdmisip.chm
toolkitmodulesblade.chm
pcdmisregistry.chm
pcdmisfixturing.chm
Here's what it looked like after the command line compile (the bad and the ugly):
[MERGE FILES]
d:\hg\pcdmisqa\pcdlrn\help\corehelp\pcdmisportable.chm
d:\hg\pcdmisqa\pcdlrn\help\corehelp\pcdmistutor.chm
d:\hg\pcdmisqa\pcdlrn\help\corehelp\pcdmisvision.chm
d:\hg\pcdmisqa\pcdlrn\help\corehelp\pcdmislaser.chm
d:\hg\pcdmisqa\pcdlrn\help\corehelp\pcdmiscmm.chm
d:\hg\pcdmisqa\pcdlrn\help\corehelp\pcdmisUJB.chm
d:\hg\pcdmisqa\pcdlrn\help\corehelp\pcdbasic.chm
d:\hg\pcdmisqa\pcdlrn\help\corehelp\toolkitmodulesvwmp.chm
d:\hg\pcdmisqa\pcdlrn\help\corehelp\pcdmisdci.chm
d:\hg\pcdmisqa\pcdlrn\help\corehelp\toolkitmodules.chm
d:\hg\pcdmisqa\pcdlrn\help\corehelp\pcdmisnc.chm
d:\hg\pcdmisqa\pcdlrn\help\corehelp\pcdmisip.chm
d:\hg\pcdmisqa\pcdlrn\help\corehelp\toolkitmodulesblade.chm
d:\hg\pcdmisqa\pcdlrn\help\corehelp\pcdmisregistry.chm
d:\hg\pcdmisqa\pcdlrn\help\corehelp\pcdmisfixturing.chm
I've done the following ....
I've checked my .xpj file and they have relative paths only.
I've deleted my .cpd file.
I've removed chm references from my rhbag.apj.
... and the hhp file still gets modified with pathways to my core project
directory tacked on:
It's strange; because if I compile without the command line, by opening the project and running the generation inside of RH, I don't get the problem where it re-writes the [Merge Files] section with the pathnames.
Any ideas on where are these rogue full pathways coming from and how I can fix it? Or is it just a bug with the command line version of the compiler that Adobe will need to fix?

I don't use command line generation but to the best of my knowledge, this has not been fixed.
Please follow this link.
http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Can you renumber pages in a merged file

I often merge files from word and exel and other programs. Can I renumber this new file

You cannot delete pages in Reader on any platform. Reader is a reading app not an editing app.
You can delete pages in Acrobat on Mac or Windows.

Acrobat 9 Pro Merge Files Into Single PDF

Just wanted to know if there's a way on Acrobat 9 Pro,i can select a folder using Merge Files Into Single PDF and have it merge each of the subfolders in the folder into separate single PDFs and have then retain the names of their corresponding subfolders? At the moment i'm having to do one folder at a time and then name them.
Any help would be great

Hi Bill
Thanks so very much - you have solved the problem.
I tried Document > Insert Pages and that worked.
I then ran the "Repair" feature on Adobe which installed a few updates and I am now also able to merge pdf's by using the "Combine" feature and all the pages show the text/info.
Thanks again for your help, it is very much appreciated.
Thank you also to Apoorv for your assistance.

Help required for slicing and merging file

Hi,
I am working on p2p downloading application based on Gnutella. Right now i am trying to implement downlaoding one file from many hosts at a time(like limewire does). i am able to connect to multiple host. but dont know how to downlaod and merge file for his purpose.
i know how to download one file from single host. but dont know how to handle file coming from multiple hosts.
if anyone having knowledge, please tell as soon as possble.

Hi.
thanks for the reply. Actually i had something same
in my mind. but unfortunately i am quite week in
serializtion and file stuff. If you could provide me
with code snipet for this, or can just simulate in a
fewer lines of code, it would be a great help for
me...i have too much short time...
i think i really have to study this file
stuff..........You shouldn't use serialization. Just invent a protocol, and "normal" binary data.
Kaj

Acrobat Pro 9: "Merge files into a single pdf" creates blank pages

I have a similar problem as a previous post (which hasn't been answered).
I am able to pdf individual Word documents fine, but when I try to Combine > Merge files into a single pdf, the resulting pdf pages are all blank. I don't receive any error messages or have problems saving the file.
I am using Adobe Acrobat Pro 9 (9.5.1) on Windows 7.
The merging of pdf's hasn't worked at all since I installed the program.
Any help would be much appreciated.

Hi Bill
Thanks so very much - you have solved the problem.
I tried Document > Insert Pages and that worked.
I then ran the "Repair" feature on Adobe which installed a few updates and I am now also able to merge pdf's by using the "Combine" feature and all the pages show the text/info.
Thanks again for your help, it is very much appreciated.
Thank you also to Apoorv for your assistance.

Acrobat Pro 9.4.5 crashes when merging files

Is anyone else experiencing this? Adobe Acrobat Pro 9.4.5 works for while when merging files into a single PDF but then starts crashing when saving the mreged file. (MacBook Air, 10.6.7)

how big is the PDF in MB (more or less according to the loose pages)?
what happens if you save to desktop as xyz_2.pdf for eg.
G

Multiple indesign files for product brochure one data merge file

I have multiple indesign files for product brochure and there are price changes for various products.
attached is a screen shot of the folder where all the indesign files are located as you can see each one has been laid out as a spread.
Rather than opening each individual indesign file to amend prices can i quickly? or is there a way of compliling all documents into one file and quickly updating the price with the data merge file.
thanks in advance.

Absolutely not.
(1)     PDF/VT-1 files must also be PDF/X-4 files. The “create PDF via distillation of PostScript” method precludes this since PostScript supports neither live transparency nor color management.
(2)     The efficiencies of PDF/VT-1 require use of Forms XOjects and Image XObjects in the PDF file. That requires direct PDF creation that you get from PDF export. This is not available via any route that uses stink'in PostScript as an intermediary.
(3)     Adobe most strongly endorses PDF creation from InDesign via the export function, not printing to PostScript and distilling. Such PostScript is optimized strictly for printing and not for PDF file creation.
          - Dov

C-Series Merged files issue

Similar Messages

Maybe you are looking for