C++ tab delimited file to array
Converting a large tcl project into c++ and i am struggling with the simplest tasks. For example, i used to create array of data from my file using the following method.
.debug.t insert end "Reading Well Data\n" ; update
set fileId [open data/$welldat r]
set wcntr 0
set welllist ""
gets $fileId line
while {[gets $fileId line] >=0} {
scan $line "%s %s %f %f %f %f %f %f" wellid well xsurf ysurf xbh ybh elev td
incr wcntr
set wida($well) $wellid
set wella($well) $well
lappend welllist $well
set xsurfa($well) $xsurf
set ysurfa($well) $ysurf
set xbha($well) $xbh
set ybha($well) $ybh
set eleva($well) $elev
set tda($well) $td
close $fileId
Here is what i have so far in c++. Dont laugh i am using what is being taught at a community college class. Pretty basic stuff.
#include <iostream>
#include <fstream>
#include <string>
#include <sstream>
using namespace std;
int main()
//Initialize temp Variable to hold lines and entrys.
string fileLine = "";
string tempEntry = "";
//Initialize Arrays for wells.txt file
string wellName [] = {""};
long wellApi [] = {0}, tempAPI = 0;
double surfaceX [] = {0.0}, surfaceY [] = {0.0}, bottomX [] = {0.0}, bottomY [] = {0.0}, kellyBushing [] = {0.0}, totalDepth [] = {0.0} ;
//Create input file instance
ifstream inWells;
//open file
//File format is a tab dilimited file
//Well label, api, surface x coord, surface y coord, bottom x coord, bottom y coord, kelly bushing elevation, total depth of well
inWells.open("wells.txt");
//no else to check for failed open file.
if(inWells.is_open())
//intialize counter set to zero
int fieldCounter = 0;
//exits the loop when line is no longer good.
//loop starts
while (!inWells.eof())
//get the entire line and store it in a variable fileLine.
getline(inWells,tempEntry,'\t');
cout << fieldCounter << " " << tempEntry << endl;
fieldCounter ++;
//end if
system("pause");
right now i was just trying to print each of my parsed entry's. Then i was going to add the data to the array's but for some reason when i print the data i donot get a counter on the 1st entry of each line.
Example data
THOMPSN_J__TERRILL_ST_272-#1 42389100990001 1015951.28 583865.59 1015951.30 583865.60 2681.00 21368.00
PANTHER_EX_KIMBER_GAS_17-#1 42389303410000 962142.94 571723.08 962142.90 571723.10 2829.00 14640.00
INDREX_INC_CONOCO_STA_20-#1 42389312220000 961498.99 566401.78 961499.00 566401.80 2841.00 14386.00
NEWPORT_PE_ALAMO_GIN_14-#1 42389313420000 962094.09 575749.87 962094.10 575749.90 2814.00 15316.00
SHELL_WEST_HOEFS_52-2_23-#1 42389326050000 1008181.09 548865.88 1008181.10 548865.90 2802.00 10900.00
OXY_USA_WT_BUSH_13-25_253-#1 42389326170000 1003471.84 582962.26 1003471.80 582962.30 2708.00 12590.00
OXY_USA_WT_HENDRICK_S_254-#1 42389326180000 1004569.07 586773.12 1004569.10 586773.10 2701.00 12795.00
PRIMEXX_OP_PISTOLA_186-#1 42389326270000 986849.60 559777.62 986849.60 559777.60 2745.00 12600.00
PRIMEXX_OP_BELL_213_213-#1 42389326350000 992022.77 558517.55 992022.80 558517.60 2760.00 12674.00
PRIMEXX_OP_CAPPS_214__214-#1 42389326360000 990737.88 553380.84 990737.90 553380.80 2790.00 12084.00
OXY_USA_WT_POLO_GROUN_150-#1 42389326430000 983009.38 566162.59 983009.40 566162.60 2744.00 13500.00
OXY_USA_WT_EBBETS_14_149-#1 42389326560000 983502.05 568782.50 983502.10 568782.50 2727.00 12500.00
On this or this or
other similar sites you can find helping hands for your project.
--pa
Similar Messages
-
Opening a tab delimited file and replacing a space
Hi,
I am trying to open a tab delimited file with 4 columns and corresponding values under it. If no value under the column, 0 should be replaced. I used the StringTokenizer and the split methods, but this doesnt seem to work. Any ideas?
E.g
Title1 Title2 Title3
4 7
5 2
SHould be like this:
Title1 Title2 Title3
4 0 7
0 5 2
Thanks..The answer, however, is no. Java is a strongly typed
language; there is no predefined manner in which a
String object can be casted to an Integer object
because a String is not an Integer.
However, if you'd like to create an Integer based on
the contents of a String, you can pass the String to
the Integer.parseInt(String) method. That method
will do one of two things: return the Integer object
representing the integer contained within the String
(if the String represents an Integer) or throw a
NumberFormatException (if the String is not an
Integer).Hi,
Thanks tvynr for your reply. Ok first things, sorry, I had written that post in a hurry. Yes i dont usually put capital letters for my fields. Also i did mean using the add method. Not the get..
And yes I have tried various different type castings. Just to see if one of them would work. And yes i did try Integer.parseInt() by passing in the string to get back its contents as an integer. *And yes the String content is an integer.
Heres a snippet of my code -
List ArrScore1 = new ArrayList(); //List to store Score in one Array
List ArrScore2 = new ArrayList(); //List to store same Scores in another Array. FOr comparisions
List SCORES = new ArrayList();
int dist1,dist2 = 0;
float distance,percent;
while ((record = br.readLine())!= null) //To read from a file line by line from first line
recCount++;
String rec = record;
String [] ScoreScop = rec.split("\t");
ArrScore1.add(ScoreScop[4]));
ArrScore2.add(ScoreScop[4]);
} //End of While loop
System.out.println("Total Records: " + recCount);
for (int i=0; i<ArrScore1.size(); i++)
for (int j = i + 1; j < ArrScore2.size(); j++)
dist1 = Integer.parseInt(ArrScore2.get(j)); //Error I get here is is Cannot resolve symbol. What does this mean exactly?
dist2 = Integer.parseInt(ArrScore1.get(i)); //Same error
distance = dist1/dist2;
percent = distance * 100;
SCORES.add(percent); //Again same error
} //End of j loop
} // End of i loop
I have included all the necessary packages as well. Including :
import java.io.*;
import java.util.*;
import java.lang.*;
import java.util.List;
import java.util.ArrayList;Any idea what I am doing wrong here? -
Tab delimited file, to populate JTable
Hey all
As Java is fairly new for me I have come into several problems.
First of all i have a program making a tab delimited file, for example like this:
Mig 12345 You
Gig 12345 DouNow i want to read the file and populate each line in the JTable.
But my problem is the transfer from file to object.. This is my code so far:
String[] kolonneNavne = {"Kursusnavn",
"Kursusnummer",
"Point",
"Skemaplacering",
"Liniefag",
"Kursus taget"};
Object[][] kdata ={{null,null,null,null,null,null}};
try {
BufferedReader buff = new BufferedReader(new FileReader("kurser.ini"));
String linie = buff.readLine();
StringTokenizer t = new StringTokenizer(linie, "\t", false);
String kursus[] = {null,null,null,null,null};
int antalKurser = 0;
while (linie != null){
kursus[0] = t.nextToken();
kursus[1] = t.nextToken();
kursus[2] = t.nextToken();
kursus[3] = t.nextToken();
kursus[4] = t.nextToken();
kdata[0][antalKurser] = kursus[0];
kdata[1][antalKurser] = kursus[1];
kdata[2][antalKurser] = kursus[2];
kdata[3][antalKurser] = kursus[3];
kdata[4][antalKurser] = kursus[4];
kdata[5][antalKurser] = new Boolean(false);
linie = buff.readLine();
antalKurser++;
catch (ArrayIndexOutOfBoundsException e){
catch (IOException e){
e.printStackTrace();
}This should read every line in the file, and add the contents to kdata but it doesn't.
I've tried several things, reading the "How to Use tables" by java, and also looking at the Class "Scanner", but havn't got that working either.
I think that the error is in the assigning kursus[j] and kdata[][], but how do i do it? How kan i add contents to an array already having information:
Object[][] kdata;?
Is there a smarter way?
Afterwards i do the essential:
final JTable table = new JTable(kdata, kolonneNavne);Thanks for the debugging thing, i actually didn't know what it did..
Well if i change the assigning from the file with split, it should look like this:
try {
// For at l�se en linie af gangen
BufferedReader buff = new BufferedReader(new FileReader("kurser.ini"));
String linie = buff.readLine();
//Scanner sc = new Scanner(linie);
StringTokenizer t = new StringTokenizer(linie, "\t", false);
String kursus[] = {null,null,null,null,null};
int antalKurser = 0;
while (linie != null){
kdata[antalKurser] = linie.split("\t",5); // Or should this be kdata[0][antalKurser] ???
kdata[5][antalKurser] = new Boolean(false);
linie = buff.readLine();
antalKurser++;
catch (IOException e){
e.printStackTrace();
}But i still get errors when running the code...
Do i assign the data correct? It seems to me that that is the problem... I have tried searching for "object assign data java" but, all that comes up is "Object oriented programming with java"... Which i s understandeble beacause of java being Object oriented...
Hmm.. Hope you could help me with assigning the data!
It comes with this error:
Exception in thread "AWT-EventQueue-0" java.lang.ArrayIndexOutOfBoundsException: 5
at KursusTabel.<init>(KursusTabel.java:51)
at KursusTabel.createAndShowGUI(KursusTabel.java:103)
at KursusTabel.access$100(KursusTabel.java:15)
at KursusTabel$2.run(KursusTabel.java:117)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:597)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:273)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:183)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:173)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:168)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:160)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:121)Is it the first error that processes every other error? Thanks! -
Upload tab-delimited file from the application server to an internal table
Hello SAPients.
I'm using OPEN DATASET..., READ DATASET..., CLOSE DATASET to upload a file from the application server (SunOS). I'm working with SAP 4.6C. I'm trying to upload a tab-delimited file to an internal table but when I try load it the fields are not correctly separated, in fact, they are all misplaced and the table shows '#' where supposedly there was a tab.
I tried to SPLIT the line using as separator a variable with reference to CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB but for some reason that class doesn't exist in my system.
Do you know what I'm doing wrong? or Do you know a better method to upload a tab-delimited file into an internal table?
Thank you in advance for your help.Try:
REPORT ztest MESSAGE-ID 00.
PARAMETER: p_file LIKE rlgrap-filename OBLIGATORY.
DATA: BEGIN OF data_tab OCCURS 0,
data(4096),
END OF data_tab.
DATA: BEGIN OF vendor_file_x OCCURS 0.
* LFA1 Data
DATA: mandt LIKE bgr00-mandt,
lifnr LIKE blf00-lifnr,
anred LIKE blfa1-anred,
bahns LIKE blfa1-bahns,
bbbnr LIKE blfa1-bbbnr,
bbsnr LIKE blfa1-bbsnr,
begru LIKE blfa1-begru,
brsch LIKE blfa1-brsch,
bubkz LIKE blfa1-bubkz,
datlt LIKE blfa1-datlt,
dtams LIKE blfa1-dtams,
dtaws LIKE blfa1-dtaws,
erdat LIKE lfa1-erdat,
ernam LIKE lfa1-ernam,
esrnr LIKE blfa1-esrnr,
konzs LIKE blfa1-konzs,
ktokk LIKE lfa1-ktokk,
kunnr LIKE blfa1-kunnr,
land1 LIKE blfa1-land1,
lnrza LIKE blfa1-lnrza,
loevm LIKE blfa1-loevm,
name1 LIKE blfa1-name1,
name2 LIKE blfa1-name2,
name3 LIKE blfa1-name3,
name4 LIKE blfa1-name4,
ort01 LIKE blfa1-ort01,
ort02 LIKE blfa1-ort02,
pfach LIKE blfa1-pfach,
pstl2 LIKE blfa1-pstl2,
pstlz LIKE blfa1-pstlz,
regio LIKE blfa1-regio,
sortl LIKE blfa1-sortl,
sperr LIKE blfa1-sperr,
sperm LIKE blfa1-sperm,
spras LIKE blfa1-spras,
stcd1 LIKE blfa1-stcd1,
stcd2 LIKE blfa1-stcd2,
stkza LIKE blfa1-stkza,
stkzu LIKE blfa1-stkzu,
stras LIKE blfa1-stras,
telbx LIKE blfa1-telbx,
telf1 LIKE blfa1-telf1,
telf2 LIKE blfa1-telf2,
telfx LIKE blfa1-telfx,
teltx LIKE blfa1-teltx,
telx1 LIKE blfa1-telx1,
xcpdk LIKE lfa1-xcpdk,
xzemp LIKE blfa1-xzemp,
vbund LIKE blfa1-vbund,
fiskn LIKE blfa1-fiskn,
stceg LIKE blfa1-stceg,
stkzn LIKE blfa1-stkzn,
sperq LIKE blfa1-sperq,
adrnr LIKE lfa1-adrnr,
mcod1 LIKE lfa1-mcod1,
mcod2 LIKE lfa1-mcod2,
mcod3 LIKE lfa1-mcod3,
gbort LIKE blfa1-gbort,
gbdat LIKE blfa1-gbdat,
sexkz LIKE blfa1-sexkz,
kraus LIKE blfa1-kraus,
revdb LIKE blfa1-revdb,
qssys LIKE blfa1-qssys,
ktock LIKE blfa1-ktock,
pfort LIKE blfa1-pfort,
werks LIKE blfa1-werks,
ltsna LIKE blfa1-ltsna,
werkr LIKE blfa1-werkr,
plkal LIKE lfa1-plkal,
duefl LIKE lfa1-duefl,
txjcd LIKE blfa1-txjcd,
sperz LIKE lfa1-sperz,
scacd LIKE blfa1-scacd,
sfrgr LIKE blfa1-sfrgr,
lzone LIKE blfa1-lzone,
xlfza LIKE lfa1-xlfza,
dlgrp LIKE blfa1-dlgrp,
fityp LIKE blfa1-fityp,
stcdt LIKE blfa1-stcdt,
regss LIKE blfa1-regss,
actss LIKE blfa1-actss,
stcd3 LIKE blfa1-stcd3,
stcd4 LIKE blfa1-stcd4,
ipisp LIKE blfa1-ipisp,
taxbs LIKE blfa1-taxbs,
profs LIKE blfa1-profs,
stgdl LIKE blfa1-stgdl,
emnfr LIKE blfa1-emnfr,
lfurl LIKE blfa1-lfurl,
j_1kfrepre LIKE blfa1-j_1kfrepre,
j_1kftbus LIKE blfa1-j_1kftbus,
j_1kftind LIKE blfa1-j_1kftind,
confs LIKE lfa1-confs,
updat LIKE lfa1-updat,
uptim LIKE lfa1-uptim,
nodel LIKE blfa1-nodel.
DATA: END OF vendor_file_x.
FIELD-SYMBOLS: <field>,
<field_1>.
DATA: delim TYPE x VALUE '09'.
DATA: fld_chk(4096),
last_char,
quote_1 TYPE i,
quote_2 TYPE i,
fld_lth TYPE i,
columns TYPE i,
field_end TYPE i,
outp_rec TYPE i,
extras(3) TYPE c VALUE '.,"',
mixed_no(14) TYPE c VALUE '1234567890-.,"'.
OPEN DATASET p_file FOR INPUT.
DO.
READ DATASET p_file INTO data_tab-data.
IF sy-subrc = 0.
APPEND data_tab.
ELSE.
EXIT.
ENDIF.
ENDDO.
* count columns in output structure
DO.
ASSIGN COMPONENT sy-index OF STRUCTURE vendor_file_x TO <field>.
IF sy-subrc <> 0.
EXIT.
ENDIF.
columns = sy-index.
ENDDO.
* Assign elements of input file to internal table
CLEAR vendor_file_x.
IF columns > 0.
LOOP AT data_tab.
DO columns TIMES.
ASSIGN space TO <field>.
ASSIGN space TO <field_1>.
ASSIGN COMPONENT sy-index OF STRUCTURE vendor_file_x TO <field>.
SEARCH data_tab-data FOR delim.
IF sy-fdpos > 0.
field_end = sy-fdpos + 1.
ASSIGN data_tab-data(sy-fdpos) TO <field_1>.
* Check that numeric fields don't contain any embedded " or ,
IF <field_1> CO mixed_no AND
<field_1> CA extras.
TRANSLATE <field_1> USING '" , '.
CONDENSE <field_1> NO-GAPS.
ENDIF.
* If first and last characters are '"', remove both.
fld_chk = <field_1>.
IF NOT fld_chk IS INITIAL.
fld_lth = strlen( fld_chk ) - 1.
MOVE fld_chk+fld_lth(1) TO last_char.
IF fld_chk(1) = '"' AND
last_char = '"'.
MOVE space TO fld_chk+fld_lth(1).
SHIFT fld_chk.
MOVE fld_chk TO <field_1>.
ENDIF. " for if fld_chk(1)=" & last_char="
ENDIF. " for if not fld_chk is initial
* Replace "" with "
DO.
IF fld_chk CS '""'.
quote_1 = sy-fdpos.
quote_2 = sy-fdpos + 1.
MOVE fld_chk+quote_2 TO fld_chk+quote_1.
ELSE.
MOVE fld_chk TO <field_1>.
EXIT.
ENDIF.
ENDDO.
<field> = <field_1>.
ELSE.
field_end = 1.
ENDIF.
SHIFT data_tab-data LEFT BY field_end PLACES.
ENDDO.
APPEND vendor_file_x.
CLEAR vendor_file_x.
ENDLOOP.
ENDIF.
CLEAR data_tab.
REFRESH data_tab.
FREE data_tab.
Rob -
Read Tab delimited File from Application server
Hi Experts,
I am facing problem while reading file from Application server.
File in Application server is stored as follows, The below file is a tab delimited file.
##K#U#N#N#R###T#I#T#L#E###N#A#M#E#1###N#A#M#E#2###N#A#M#E#3###N#A#M#E#4###S#O#R#T#1###S#O#R#T#2###N#A#M#E#_#C#O###S#T#R#_#S#U#P#P#L#1###S#T#R#_#S#U#P#P#L#2###S#T#R#E#E#T###H#O#U#S#E#_#N#U#M#1
i have downloaded this file from Application server using Transaction CG3Y. the Downloaded file is a tab delimited file and i could not see "#' in the file,
The code is as Below.
c_split TYPE abap_char1 VALUE cl_abap_char_utilities=>horizontal_tab.
here i am using IGNORING CONVERSION ERRORS in order to avoid Conversion Error Short Dump.
OPEN DATASET wa_filename-file FOR INPUT IN TEXT MODE ENCODING DEFAULT IGNORING CONVERSION ERRORS.
IF sy-subrc = 0.
WRITE : /,'...Processing file - ', wa_filename-file.
DO.
Read the contents of file
READ DATASET wa_filename-file INTO wa_file-data.
IF sy-subrc = 0.
SPLIT wa_file-data AT c_split INTO wa_adrc_2-kunnr
wa_adrc_2-title
wa_adrc_2-name1
wa_adrc_2-name2
wa_adrc_2-name3
wa_adrc_2-name4
wa_adrc_2-name_co
wa_adrc_2-city1
wa_adrc_2-city2
wa_adrc_2-regiogroup
wa_adrc_2-post_code1
wa_adrc_2-post_code2
wa_adrc_2-po_box
wa_adrc_2-po_box_loc
wa_adrc_2-transpzone
wa_adrc_2-street
wa_adrc_2-house_num1
wa_adrc_2-house_num2
wa_adrc_2-str_suppl1
wa_adrc_2-str_suppl2
wa_adrc_2-country
wa_adrc_2-langu
wa_adrc_2-region
wa_adrc_2-sort1
wa_adrc_2-sort2
wa_adrc_2-deflt_comm
wa_adrc_2-tel_number
wa_adrc_2-tel_extens
wa_adrc_2-fax_number
wa_adrc_2-fax_extens
wa_adrc_2-taxjurcode.
WA_FILE-DATA is having below values
##K#U#N#N#R###T#I#T#L#E###N#A#M#E#1###N#A#M#E#2###N#A#M#E#3###N#A#M#E#4###S#O#R#T#1###S#O#R#T#2###N#A#M#E#_#C#O###S#T#R#_#S#U#P#P#L#1###S#T#R#_#S#U#P#P#L#2###S#T#R#E#E#T###H#O#U#S#E#_#N#U#M#1
And this is split by tab delimited and moved to other variables as shown above.
Please guide me how to read the contents without "#' from the file.
I have tried all possible ways and unable to get solution.
Thanks,
ShrikanthHi ,
In ECC 6 if all the unicode patches are applied then UTF 16 will defintly work..
More over i would suggest you to ist replace # with some other * or , and then try to see in debugging if any further # appears..
and no # appears then try to split now.
if even now the # appears after replace statement then try to find out what exactly is it... wheather it is a horizantal tab etc....
and then again try to replace it and then split..
Please follow the process untill all the # are replaced...
This should work for you..
Let me know if you further face any issue...
Regards
Satish Boguda -
To import addresses, need format of tab delimited file
I am trying to import addresses from my G3 PB Mozilla App. I exported addresses on G3 to both ldif and tab-delimited files and then attached to an email message which I sent to myself. I received email on Mac mini, but the 2 files showed up inline, not as attachments. I copied the ldif portion to a text file; ditto for tab-delimited. I tried importing into Address Book, but got message that format was not valid.
Can't I just edit the tab-delimited file in TextEdit, save as RTF, and get Address Book to recognize the data?
Thanks,
OwenHi, Did you get solution for this? Please let me know as I'm looking for the same solution. The Bank requirement is to generate a Tab delimited file but the RFFOGB_T with Format GB_BACS issues the output as below...
Required by Bank:
692532 73855963 RRS P R BACKLEY 169.91 GSLV
294518 99855581 CETS PRITECTIIN 799.72 GSLV
The output I get from SAP/DMEE:
........1........2........3........4........5........6....
VOL1000004 ....953312
1 <CR/LF>
HDR1A953312S 195331200000400010001 10040 100420000000
<CR/LF>
HDR2F0200000100 00
<CR/LF>
UHL1 10041999999 000000001 DAILY 000
<CR/LF>
6010392865540009960062063474662 00000115000ABC UK Ltd. 0
1465 <CR/LF>
6006206347466201760062063474662 00000115000SAPBACS0000003306 C
ONTRA ABC UK LTD. <CR/LF>
EOF1A953312S 195331200000400010001 10040 100420000000
<CR/LF>
EOF2F0200000100 00
<CR/LF>
UTL10000000115000000000011500000000010000001
<CR/LF>
END
<CR/LF>
<END>
Rgds,
Stan -
GUI_Download problem in tab delimited file
Hi,
I am trying to download tab delimited file using F.M GUI_DOWNLOAD.We have
4.6C version.I have declared internal table with 5 columns.The file created using F.M is very strange.Column 1 and 2 and 3 and 4 are seaprated by tab but column 2
and 3 and column 4 and 5 are not seaprated by tab but have fixed length.
I am not getting where I am doing mistake.Any help is appericiated.
Below is the structure of internal table.
DATA:BEGIN OF IT_FINAL OCCURS 0,
Company(3) type c,
County(30) type c,
FId(35) type c,
Wellno(15) type c,
Welldesc(35) type c,
END OF IT_FINAL.
Data populated in table it_final.
it_final-Company = '300'.
it_final-County = 'Greenwood'.
it_final-fid = 'testts'.
it_final-wellno = '10000000'.
it_final-welldesc = 'tebsbvd'.
append it_final.
F.M GUI_DOWNLOAD
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = l_path
FILETYPE = 'ASC'
APPEND = ' '
write_field_separator = 'X'
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
IMPORTING
FILELENGTH =
TABLES
data_tab = it_final
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22
Thanks,
Rekha.Hi,
i think it is because tou need to uncomment:
FILETYPE = 'ASC'
try it.
Best regards. -
Hi All,
I am trying to create a tab delimited file using Sender File adapter using <b>File content Conversion in Adapter Module</b>. I want a constant space beteween the fields of length 8 spaces. When i use ' ' as field seperater , the file that is generated is <b>19' 'Stringtest14,Hiring' '09/03/2007' 'Managing Dir, Operations</b>. I want the file without colons i.e <b>19 Stringtest14,Hiring' 09/03/2007 Managing Dir, Operations</b>.
Please Advice...
Regards,
XIerHi Xler
<b>content conversion parameters ,, just like</b>
Recordset structure = DT_PRY,*
DT_PRY.fieldnames = ID,empname,empno,country
DT_PRY.fieldSeparator = '0x09' (tab delimited)
DT_PRY.endSeparator = 'nl'
<b>
The FCC...</b>
Document Name : MT_PRY
Document Namespace : http://product.com/prvsoup
Recordset Name : recordset
Recordset structure = DT_PRY,*
DT_PRY.fieldnames = ID,empname,empno,country
DT_PRY.fieldSeparator = '0x09'
DT_PRY.endSeparator = 'nl'
ignoreRecordsetName = true
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
<b>can take the help of this blog</b>
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
<b>Conversion agent</b>
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/paul.medaille/blog/2005/11/18/conversion-agent-a-free-lunch
/people/alexander.bundschuh/blog/2006/03/14/integrate-sap-conversion-agent-by-itemfield-with-sap-xi
/people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
Thanks!
Questions are welcome here!!
<b>Also mark helpful answers by rewarding points</b>
Regards
Abhishek Agrahari -
Import text into a form from a tab delimited file using an action
Good evening.
I am using Adobe Acrobat XI Pro
I have been working all weekend so far on this, and have tried many options.
What I am wanting is to import a line of data from an excel file into a form, save the file with a name drived from the form fields, close the new file, then go back to the original file, import a line of data, and so on and so on.
I had all of this working in livecyle with a tool, but now that we are going to Windows 8 and Microsoft Office 2013, the driver that I need to load the excel file into the form is not available--so now I have to redo the forms in Adobe and import using a tab delimited file.
I would like to do this with an action.
Thus far, I have the following.
**Credit goes to George Johnson who helped me with the script to save the file using field names a few months ago**
To start, I have a folder level script
mySaveAs = app.trustPropagatorFunction(function(doc,path)
app.beginPriv();
var myDoc = event.target;
myDoc.saveAs(path);
app.endPriv();
myTrustedSpecialTaskFunc = app.trustedFunction(function(doc,path)
//privileged and/or non-privileged code above
app.beginPriv();
mySaveAs(doc, path);
app.endPriv
//Privileged and/or non-privileged code below
For the Action, I start with the Form file loaded
Then I execute a javascript to import the text into the file.
this.importTextData("/c/data/clerical.txt");
The next step is to save the file using field names as part of the file name
--credit goes to George Johnson who assisted me with this on a similar project a few months ago.
//Get the Field Value
var fn=getField("Last").valueAsString + "-" + getField("First").valueAsString;
//Specify the folder
var fldr = "/c/data/";
//Determine the full path
var fp=fldr + fn + ".pdf";
//save the file
myTrustedSpecialTaskFunc(this, fp);
That is as far as I have gotten.
What I want to do now is load the original form file, import the next line into the form, save the file, repeat.
If anyone could assist me, I would greatly appreciate it.
**note I had to type this from my I-pad because I kept getting kicked off the internet from my computer. I hope my code is typed correctly.George
Thank you so much for your response.
Yes--there are multiple lines in the data file--it will vary from month to month. It looks like from what you are saying is that I need to do the global variable since it will constantly change, and then increment it as it goes through the text file. When it reaches the end, then it will stop.
I looked at the following links--but this is from Adobe 9 API--I don't know if things have changed with XI--especially since 9 used batch processing and XI has actions.
Count PDF Files
http://help.adobe.com/livedocs/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/wwhelp/wwhimpl/js/html/ wwhelp.htm?href=JS_API_AcroJS.88.1.html
Global counter
http://help.adobe.com/livedocs/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/wwhelp/wwhimpl/js/html/ wwhelp.htm?href=JS_API_AcroJS.88.1.html
I am not exactly sure how to include this in my code.
If you could point me in the right direction, I would appreciate it. -
How to convert Mail attachment file Tab Delimited file to XML.
Hi PI Experts
I have XI scenario: MAIL XI SAP (ABAP Proxy), the process is
1. XI will receive tab delimited file as attachment in mail.
2. XI will convert the tab delimited file into XML, then map to the target structure.
3. Target will be posted into ECC through ABAP Proxy.
Can anyone help me how can I convert the attachment file (i.e. Tab delimited file) to XML while configuring the sender side.
Thanks in AdvanceI just grabed what I answered from another thread. It should work.
Processing sequence as follows:
1. localejbs/AF_Modules/PayloadSwapBean Local Enterprise Bean swap1
2. localejbs/AF_Modules/MessageTransformBean Local Enterprise Bean tran1
3. sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean Local Enterprise Bean mail
Module Configuration as follows: Fill the XXXX part with your info.
swap1 swap.keyName payload-name
swap1 swap.keyValue MailAttachment-1
tran1 Transform.Class com.sap.aii.messaging.adapter.Conversion
tran1 Transform.ContentType ext/xml;charset=utf-8
tran1 xml.conversionType SimplePlain2XML
tran1 xml.documentName XXXXXXX_Mail
tran1 xml.documentNamespace http://XXXXX.com.au/XXXX
tran1 xml.fieldSeparator \t
tran1 xml.processFieldNames fromConfiguration
tran1 xml.structureTitle rows
Once you set up the above configuration, you will get one record at a time.
Create a souce message interface like the followings:
XXXXXXXXX_Mail
rows
record
Target message interface:
XXXXXXXXX
rows
field 1
field 2
field 3
Write a UDF function to remove the TAB space
public removeTABSpace(String record,Container container){
//write your code here
StringTokenizer st = new StringTokenizer(record,"\t",false);
String t="";
while (st.hasMoreElements()) t += st.nextElement();
return t;
Write another UDF to get the field 1 for example:
public String getField1(String input,Container container){
int counter=0;
int beginIndex=0;
int endIndex=0;
int i;
for (i=0;i<input.length();i++){
if (input.charAt(i)==34){
counter=counter+1;
if (counter==1){
beginIndex=i+1;
counter=0;
break;
for (i=0;i<input.length();i++){
if (input.charAt(i)==34){
counter=counter+1;
if (counter==2){
endIndex=i;
counter=0;
break;
input=input.substring(beginIndex,endIndex);
return input;
Get the mapping like the followings:
record - removeTABSpace - getField1 - field 1
If you need to get field 2, you will need to write another UDF similar to the above one to handle it. -
Formatting a tab delimited file
Hello All,
I am populating a tab delimited text file with data from a resultset and I'm having problems lining up the columns properly. I tried using tabs, but the variable length of some of the entries are messing up the positioning of the data. Is there a way to create tab delimited fixed length fields with column headers? or is there some better way to do this in general?
Thanks,
JamesI got it working using StringBuffers. Where I missed it was that the formatting of the text of the report originally didn't work under the
code. It was being automatically formatted when it was passed as a message in an email under javamail. I had forgotten that Outlook will do that on it's own. When I tried to make the report an attachment, the defect in the formatting became apparent.
I also got it working (better solution) using POI. That way the attachment is an .xls file, rather than tab-delimited file.
FYI,
James -
Inserting a tab delimited file
Hi there,
I am inserting data into a database from text files. I can easily do this in sql with csv files but I need to be able to do it with tab delimited files. I know you can do this from the built in Oracle tool (I am using express edition) but I was wandering if anyone know how to write a script for it in sql.
Any help would be greatly appreciated.
ThanksIf you are using SQL Loader to load the data use below syntex
FIELDS TERMINATED BY X'9'
The X'9' is Hexadecimal Format -> X
and Hex 9 is the ASCII code of the TAB character.
Check out the link for more details:
http://asktom.oracle.com/pls/ask/f?p=4950:8:::::F4950_P8_DISPLAYID:533222350291
Regards
Arun -
Is there any methodology whereby a file can be exported, or saved, as a Tab Delimited File?
ThanksSelect All
Copy
Paste in a Pages document
Export as text.
Other way (my preffered one) :
Select All
Copy
run this Script :
--[SCRIPT clipboard2textFile]
Enregistrer le script en tant que Script :clipboard2textFile.scpt
déplacer le fichier créé dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:
Copiez la table à exporter dans le Presse-papiers.
menu Scripts > clipboard2textFile
Le script créera un fichier TSV (valeurs séparées par TAB).
--=====
L'aide du Finder explique:
L'Utilitaire AppleScript permet d'activer le Menu des scripts :
Ouvrez l'Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case "Afficher le menu des scripts dans la barre de menus".
+++++++
Save the script as a Script :clipboard2textFile.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:
Copy the table to export into the clipboard
menu Scripts > clipboard2textFile
The script will create a TSV file (Tab separated values).
--=====
The Finder's Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the "Show Script Menu in menu bar" checkbox.
+++++++
Yvan KOENIG (VALLAURIS, France))
2009/07/07
2010/01/10 : Corrigé quelques coquilles dans les explications
--=====
on run
try
set enTexte to the clipboard as text
set fName to (do shell script "date " & quote & "+_%Y%m%d-%H%M%S" & quote) & "." & "txt"
set p2d to path to desktop
tell application "System Events" to make new file at end of p2d with properties {name:fName}
write enTexte to file ((p2d as text) & fName)
on error
if my parleAnglais() then
error "The clipboard doesn’t contain text data. Maybe you selected a Numbers sheet !"
else
error "Le presse-papiers ne contient pas de données texte. Vous avez peut-être copié une feuille de Numbers !"
end if
end try
end run
--=====
on parleAnglais()
local z
try
tell application "Numbers" to set z to localized string "Cancel"
on error
set z to "Cancel"
end try
return (z is not "Annuler")
end parleAnglais
--=====
--[/SCRIPT]
Yvan KOENIG (VALLAURIS, France) mardi 16 février 2010 21:57:42 -
Opening a tab-delimited file in numbers
Hello,
I have a tab-delimited file with the extension .srt to open in Numbers. I can do this easily in Microsoft Excel by going to the Open menu. It then gives me the option to say how the file is delimited and then it opens it. I can't seem to do this in Numbers... When I get to the Open menu and try to open the file, it is grayed out, so unaccessible... how does one do this in Mac?
ThanksAs was explained here many times, Numbers may open csv files if :
(1) the file name ends with ".csv"
(2) values are separated by commas if the decimal char in use on the machine is the period
values are separated by semi-colons if the decimal char in use on the machine is the comma.
(3) we have no way to change the values separator.
Yvan KOENIG (VALLAURIS, France) samedi 18 juin 2011 20:50:54
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer ! -
Hello,
i have to put in as a source a tab delimited file - can nothing do about it, because our report generates it this way.
So I have no idea, how to enter kind of \t into the file component delimiter tab. I can enter some 1 char things like ",", "," or "^", but not \t.
It would be cool, if somebody had a sort of workaround. I have currently no abap role, so abap code soltion would not help.
Thank you in advance
SergejHi Sergej,
Could you please provide same output data?
Thank you,
Nanda
Maybe you are looking for
-
MSPS 2010 Issue and Risks Alerts
All, We are using MSPS 2010 with June CU Update. Is there a way to turn on "automatic Alerts" to the "Assigned To" person when an issue/risk is assigned to that person on a Project Site? I know this was not possible in Project 2007, and the options w
-
QuickTime/Flash (*.swf) - no sound
QuickTime Pro 7.1.6, Flash Player 9UB New problem. Everything copacetic until in middle of class, *.swf file embedded in Keynote presentation had no sound. Visual ok, but no sound when playing *.swf files. Even if just open *.swf file in QT, visual o
-
The signatures and text in my digitally signed pdf are garbled
How do I convert this type of document to word using the adobe converter without it coming out garbled. The signatures show as weird text.
-
Process Chain Mail - Return Receip
We have configured a process chain to send an email if it encounters an error. When we open the email in Lotus Notes, it sends a "return receipt" back to the server. I have changed the "Trans Options" configuration tab SendStatus to "Never". Howeve
-
Help me with incoming mail report
Hello All, I am new with cisco ironport. I was asked to provide a report on Incoming mail count over a period of time from a particular sender. Could someone please help on how can i prepare such report. (if possible some more details like if any ema