C:windows\saplogon.ini file error

Hi Experts,
I have SAPGUI 7.10 systems and whenever I add new SAP Server in SAP Logon Pad, a corresponding entry is created in C:\WINDOWS\SAPLOGON.INI file.
But in some system, part of file content is as below:
Server
Item1=
Item2=XXXXX
Item3=YYYYY
Item4=AAAAA
Item5=BBBBB
where in xxx, yyyy,aaa,bbb are the application server IP.
But here Item1= <space> as shown.
For other user systems, item1 corresponds for first entry of logon pad as expected.
Server
Item1=XXXXX
Item2=YYYY
Item3=AAAA
Item4=BBBBB
And I am getting an error if I try at system with item1=<space>.
Can you tell why this space is inserted on some system and not on others?
Thanks
Depesh.

Hi,
I am using sapgui 7.10 with patch level 14.
There is a space shown in all the systems and this creating a problem while executing an SAP shortcut by saying no system description found as it tries to search for a description from saplogon.ini. even if it exists but with a space for item1.
nobody has manually changed the saplogon.ini file.
if i manually remove the space then add server list again or i copy the file with no space from somebody system then it works without error.
But i cannot copy and replace this file if i have 1000+ user working on a solution having their saplogon.ini file with item1=space.
Kindly suggest some automated process to ensure the space removal.
thanks
depesh.

Similar Messages

Problem related to C:\WINDOWS\SAPLOGON.INI file

Hi Experts,
I have SAPGUI 7.10 systems and whenever I add new SAP Server in SAP Logon Pad, a corresponding entry is created in C:\WINDOWS\SAPLOGON.INI file.
But in some system, part of file content is as below:
[Server]
Item1=
Item2=XXXXX
Item3=YYYYY
Item4=AAAAA
Item5=BBBBB
where in xxx, yyyy,aaa,bbb are the application server IP.
But here Item1= <space> as shown.
For other user systems, item1 corresponds for first entry of logon pad as expected.
[Server]
Item1=XXXXX
Item2=YYYY
Item3=AAAA
Item4=BBBBB
And I am getting an error if I try at system with item1=<space>.
Actually, I need to check this because system ID is mapped to description when I execute SAP Shortcut from dynpro.
Can you tell why this space is inserted on some system and not on others?
Thanks
Depesh.

This question doesn't appear to be at all Web Dynpro ABAP related. Please post your questions in the correct forum in the future.

Saplogon.ini file location question

Hi, any advice would be appreciated thanks
we have rolled the sap gui 6.40 to all our clients - all using a local copy of the saplogon.ini file in the local windows directory. however we wish to change this approach and have a central saplogon.ini file on a file server and point all the clients to this file.. any changes only then have to be made in one place.
can anyone help me with this, firstly is it possible, and if so how to change the client setting to adjust the location.
many thanks.

Hi thanks for your link.
The document you pointed me towards led me to SAP note number 756686
which explains that you can edit the SAP icon on your desktop (by right-clicking and opening with notepad) and then adding a line cmd="/ini_file='path to ini file'\saplogon.ini'
Thanks for your assistance.
Edited by: Mike Ellis on Mar 4, 2008 1:05 PM

SAPLOGON.SAL- different saplogon.ini files

Dear all,
I'm looking for a possibility to use different ini files, dependent from the access via network (lan) or VPN.
The local saplogon.ini file should only be used if the saplogon.ini file from the network directory is not available. Maybe with SAPLOGON.SAL?
thanks in advance!

if (netWorkIsAvailable())
System.Runtime.InteropServices.Environment.SetEnvironmentVariable("SAPLOGON_INI_FILE", "c:
windows
SAPLOGON.SAL");
else
System.Runtime.InteropServices.Environment.SetEnvironmentVariable("SAPLOGON_INI_FILE", null);
SAPLogonDestination dest = new SAPLogonDestination();
Message was edited by: Reiner Hille-Doering

SAPLOGON.INI file

Dear All,
I had installed SAP LOGON 710, Patch Level 9 on Windows Vista OS. I am not able to find SAPLOGON.INI file. Normally it is in C:\Windows but it is not there. I had also search whole C:\ drive but it is not there.
I want to know the where the logon details are saved. if any one knows abt this please replay.
Regards,
Tejas Naik.

Hi,
did you search for SAPLOGON.INI?
Do you have a local or a server-installation of SAPGUI?
Regards, Dieter
Another way i to look in LOGON-Pad in OPTIONS. There you can see what saplogon.ini is used.
Regards, Dieter
Edited by: Dieter Gröhn on Sep 23, 2008 12:59 PM

How to merge multipal saplogon.ini files..

How can I merge the multiple saplogon.ini files if system is on Domain?

We are merging two SAP Logon.ini file. The common file I placed in c:windows and the users own entries are in saplogon.ini in the %appdata%commonSAP directory. And by using note 1426178 pkt. 5, we set ConfigFileOnServer to c:
Now the user can create own entries in own saplogon.ini, and not change entries in the common saplogon.in I c:windows.
If you update the common file, you just have to replace the file in c:windows.
/René

Windows boot.ini file on Mac

My Windows Boot.ini file is missing
Could any one know how to fix the file in order for me to reinstall my windows 7?

Install the free version of Flip4Mac.
(68522)

How to excute scripts for distributing SAPLOGON.ini file

Hi Experts,
Could you please tell the steps if I have to distirbute new SAPLOGON.ini file to all clients as existing one is having issue of empty entry for item1 for server details.
I have got script code from the below mentioned link:
Installation Server package event scripting for services file
But I dont know how these scripts are to be executed?
Thanks
Depesh

hello
please read the installation server help.chm file carefully!
There you find the information which you looking for.
You need an Frontend Installation server and then you can use the exampleas in the
installation serverhelp.chm file to deploy thesaplogon.ini with our nwsaspetup scripting
included in the frontend installation server.
In the Installationserverhelp.chm you find the chapter
Administering an Installation Server ->
Maintaining Installation Packages ->
Configuring Packages and Scripting Events ->
Package Event Scripting Samples ->
Example 1: Copying a customized u201CSapLogon.iniu201D and u201Cservicesu201D-file -->
Also please red the Frontend Installation Guide.
All Information which you need you can find in this 2 documentations!
Best Regards, Sven

When creating pdf file am getting [700]** Message Msg700 not in .ini file ** error

I am new to adobe output server. Am getting " [700]** Message Msg700 not in .ini file **, [397]** Message Msg397 not in .ini file **, [125]** Message Msg125 not in .ini file ** " while creating pdf file. Please help on this issue.

Is this a new form, or one that was working before ? Has something changed on the system ?
Those errors dont really mean anything, so need to understand more around what is happening - a snippet from the log file just prior to the errors to see what is going on ?

TUP.ini File Error

I have Call Manager and Contact Center and installed both of them. Then i added license but i want to install CAD Client Configuration. I downloaded .exe file in CCX (Tools-->Plug-ins-->Download CAD Client Configuration) but when i open this .exe file, the program gives a error. Error is: "TUP.ini file on the server is missing a critical value for the Call Center Language."
How can i fix this problem?

Hi Ozcan,
I'm not aware of this issue affecting UCCX 8.0 but I can tell you that your current configuration is unsupported. CCX 8.0 is not compatible with CUCM 6.0. I would not be surprised at all if this is the root of your issue. Even if it is not at the root of the issue, this setup will cause you many problems since CCX 8.0 was never designed to work with CUCM 6.0.
The compatibility guide is here: http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_compatibility/matrix/crscomtx.pdf
As far as that particular error is concerned though it sounds like the CAD configuration tool needs to be run again but first the system needs to be set back to a fresh install state (which allows you to go through the setup again and choose the language options). This can only be done by TAC so I suggest you open a case for that.
TAC will likely not be able to assist with your current configuration though so I advise to upgrade the CUCM to a supported version first.
Thanks
Mike
Be sure to rate this post if the information is helpful.

X200: Windows cannot find file error (& cygwin problem)

Often (about half the time) when I double click an icon (.docx files typically) to open I get a error reading"Windows cannot find ‘C\Users\username\Desktop\filename.docx’. Make sure you typed the name correctly, and then try again." I can *always* resolve this by simply double clicking again. I ran a complete disk check (the thing that runs on reboot) and it passed with no errors. OS: Vista with all updates, Apps: Office 2007 with all updates. Disk: Solid state (128GB) SAMSUNG MMCQE28G8MUP-0VA
Any suggestions for troubleshooting tips?
I also wonder if this might be related to the following problem. I have CYGWIN installed, and once I have changed a file in emacs and saved it, emacs can no longer find it (no matter what I do). These days I get the message within emacs "file is not readable", although in the past the error has said something about a fork.
Message Edited by andy402 on 04-25-2009 07:27 PM

There is a primitive called 'Request Deallocation' that is suppose to free up resources in a VI after it is called. You could try using this.
Paul <--Always Learning!!!
sense and simplicity.
Browse my sample VIs?

SAPGUI Java 7.20 and saplogon.ini of an old Windows GUI...

I changed Windows 7 for Ubuntu.
I installed the Java GUI (version 7.20): I would like to import my previous server list in the new GUI.
Using windows I have a saplogon.ini file, but I don't know if I can make it readable to the Java GUI
(a lot of servers there, most of them are not used anymore... but I would like to have the same list :-P).

You can found that in Linux in ~/.SAPGUI/connections file.

Saplogon.ini in configurations files section of saplogonpad.

Hello,
We have SAP GUI 7.10 patch 19 installed. Our saplogon.ini file resides in the path c:\windows and is not explicitly set anywhere. An old PLM interface to Solidworks set the Windows USER environment variable to point to C:\Program Files\SAP\FrontEnd\SAPgui by setting a value in SAPLOGON_INI_FILE, so nothing appears in the logonpad.
If I remove this USER environment variable, the logonpad entries still appear blank. On further investigation, we see in the logonpad configuration screen (in the logonpad itself) a reference to a variable called saplogon.ini being set here in a section called configuration files.
We have searched for this in the registry but cannot find it and therefore can't change it.
Does anyone know how this gets set, where it is stored and how we can change it. Ideally we'd like to remove it completely, if possible.
Thanks,
Philip.

Hello,
I have solved this. The process also created a saplogoin.ini file in C:\Program Files\SAP\FrontEnd\SAPgui which was blank. SAP GUI looks there before Windows.
Thanks,
Philip.

Regarding the file saplogon.ini

Hi Gurus,
I am facing a problem with saplogon.ini file . when i am trying to open it , it is popping up a message box --
" The filename,directory name or volume label syntax is in correct" .
Could you please help me in finding out why it is happening and could you please provide me any solution for the above problem.
Thanks in advance,
Vikram Krishna.

Hi,
There seems to be some naming problem either with your harddisk volume name or directory. Please check this link http://www.microsoft.com/technet/prodtechnol/windows2000serv/reskit/w2000Msgs/2993.mspx?mfr=true.
Verify the same and try to open the saplogon.ini in notepad.
Regards,
Subodh

Modification to SAP Logon Cannot be written to INI file

Hi,
When i am trying to create a New Item in SAP logon it is giving an error "Modification to SAP logon could not be Written to INI file
Check permission for file 'C:\Windows'.
The problem is that, this is showing even when i m logged in as "XXXADM".
I have Reinstalled the SAP GUI, but the problem is as it is.
OS: WINDOWS 2003 server
Database: Oracle.
Please help me.
Thanks in advance,
Sharib

I had this same problem under a VISTA Enterprise client setup. I tried all the various recommendations, including setting the SAPLOGON_INI_FILE environment variable to point to c:\windows\saplogon.ini. None of these changes worked, I even modified the file ownership to match up with my logged on user without success.
I then looked at the shortcut for launching SAPLOGON, and tried to set the shortcut to run as an Administrator. That option was greyed out. I deleted the shortcut, and re-created it. Still unable to save changes. I then set the new SAPLOGON shortcut to execute as the administrator, and once I confirmed that I trusted the program, everything is now working as it should.
Not content to leave it this way, I moved my saplogon.ini file OUT of the c:\windows directory and instead placed it in the directory pointed to by %USERPROFILE%\saplogon.ini . I updated the environment variable setting and also removed the falg to execute the shortcut as the system administrator.
Now everything is working as it should without any special hoops -- seems that even with full access, VISTA security would not let a domain user that was part of the PC's Administrators account to edit the file w/o running as the system administrator.
Edited by: David L. Flad on Oct 30, 2009 4:02 AM

C:windows\saplogon.ini file error

Similar Messages

Maybe you are looking for