C00D118E: You device is using an outdated driver that is no longer supported by Windows Media Player
Hi,
I have Treo Pro trying to sync with my library in WMP 11... I'm getting error "C00D118E: You device is using an outdated driver that is no longer supported by Windows Media Player"... Tried to install pTune with no luck... Tried to Google it with no luck...
Connecting the other device "i-mate Ultimate 9502" with no issues even using same memory cardin Palm Treo Pro...
My temporary solution is to put the memory card in the 9502, sync my multimedia files and then reinsert it in Treo Pro... You help is highly needed and appreciated...
Abutaleb
Post relates to: Treo Pro T850U (Unlocked)
I have searched the internet and have found the following regarding your issue.
http://www.microsoft.com/windows/windowsmedia/player/webhelp/default.aspx?&mpver=11.0.5721.5145&id=C...
Try using the steps in the article to see if you can resolve the issue.
Post relates to: Palm i705
Similar Messages
-
Windows media player will not work as no DVD driver
Had to format disk (trojan) & reinstall Windows XP home. Now Windows media player will not work as no DVD Driver, can I download from Toshiba site?
Hi
Usually the Windows media Player is not able to play DVD movies IF no plug-ins were installed.
To watch DVD movies you can use the programs like WinDVD or PowerDVD.
Such programs were designed especially for the DVD playing!
But you can also visit the Microsoft website and search for plug-ins for Windows Media player.
Then you could download and install it to play DVD with WMP
Best regards -
I want to know about time machine if i can use the hard drive that i use for time machine back up as a normal hard drive too or if it's only for time machine
and if it yes i want to know if i have 1TB hard disk to use the 500gb for time machine and the other 500gb for normal usethank you very much because i am considering to buy the porsche design hard disk 1TB and i want to have it for normal use and for time machine is a pitty to give 1TB for back up only again thanks and i know seperate the back and the working jobs are better but the i have to have 2 hardisks and i want only 1
-
"You are using a browser (SAFARI 4.0.4) that is no longer supported"
I have a iMac (20-inch, Early 2009). I am currently running Yosemite OS X 10.10.2, and my Safari is the Version 8.0.4 (10600.4.10.7). My question is this, when I log into various secure accounts I get the following message "You are using a browser (SAFARI 4.0.4) that is no longer supported by its vendor. Beginning in October 2014, PenFed will no longer support this browser version. You are strongly encouraged to update your browser to ensure your data is protected while using the Internet."
Since the Lion release. all my updates have been on line through apple. Any thoughts and advice?
Thanks
<Re-Titled By Host>Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2. -
If I have to load the same apple id on all devices to use home share, does that preclude each device from using a second apple id and does that constitute a separate Itunes db or something?
Welcome to the Apple community.
Only one of your libraries needs to use your iTunes Store Apple ID for home sharing. Your other computers can use their own ID for iTunes, so long as they use the same ID as all of the devices on the network for home sharing. -
Hi there
I got the following message when trying to install Photoshop CC, "You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms."
I use Windows Vista so not sure what I need to do now! Any help would be much appreciated thanks.Photoshop CC only runs on Windows 7 or Windows 8/8.1. Not Vista.
System requirements | Photoshop -
How can I backup the iPad to the non-C drive of the computer that runs the itune? I have already setup the library at a NAS and seems only media file are stored int he library. iPad backup still need to take use my C: drive that is running out of space
Windows - Change iPad default backup location
http://apple-ipad-tablet-help.blogspot.com/2010/07/change-ipad-default-backup-lo cation.html
Windows - Changing IPhone and iPad backup location
http://goodstuff2share.wordpress.com/2011/05/22/changing-iphone-and-ipad-backup- location/
Cheers, Tom -
Since downloading osx v10.7lion every time i try to connect to the internet using BT Broadband i keep getting a message saying
" you cant openthe application ) because Power PC applications are no longer supported." this is very annoying as i likeBT and the way it opens with all the local up to date news plus other apps +++
Please can anyone help me as apple will not help unless i sign up for a new product agreement which i cannot understand as every thing worked before this so called very latest software that everyone cant do without ?????I had the same problem with some apps and printer setup software. SInce Rosetta has been discontinued on Lion my only solution was to restore to 10.6 since the manufacturers either have not yet or will not release updated apps. In this case you have to determine how important those old PPC apps are to keep around and if there alternitives that are available to replace the functionality. I would expect a broadband provider to update thier apps if it is something that is required to connect.
Mike -
Problem with "play to device" on windows media player
Hello, I'm having a problem with the play to device feature of windows media player. I am trying to use it to play music files to my T.V. It works fine if i try to play a single file or a small number of files (50 or so), but if I try to play
my entire playlist (346 songs, if it matters)in this way or a large number of random songs, nothing happens. No error messages or freezes either, it's as if i never clicked play. I thought this might be a limitation with the t.v. or my network
(im doing this via wi-fi) but when i tried this using windows explorer instead of windows media player it worked just fine, and this was with all the music on my computer which is about 3000 songs. Therefore, i know this is a problem with windows media
player and not my t.v., network or computer. This is a problem because i don't want to play all my music, just my playlist. Short of making a separate folder with duplicate files in it for each and every playlist i want to play in this manner(which
is not only time consuming and tedious but takes up space on my hard drive) how do i remove this limitation or otherwise get around it? Thanks!
P.S. Out of curiosity, why does this limitation exist and what causes it?when i tried this using windows explorer instead of windows media player it worked just fine, and this was with all the music on my computer which is about 3000 songs.
Hi,
According to your description,you said that you used windows explorer.Did you share 3000 songs with your TV?
If so,I think this method is different with "play to" feature.
Also,we haven't found any limitation with Windows media player.
Regards,
Kelvin Xu
TechNet Community Support -
If you're having problems updating firmware and have Windows Media Player 11 B
I've seen a number of problems with people updating their firmware with WMP installed and it turns out that's the problem. WMP has a bug in it that will not allow the firmware update to recognize the player. So, here's what to do to roll back to a previous version:
These instructions will only work for Windows XP
You must be logged on as an administrator or a member of the Administrators group to perform the following procedure.
. Disconnect any portable music or video devices that might be attached to your computer.
2. Click Start, and then click Control Panel.
3. In the Category View of Control Panel, click Add or Remove Programs, and then click Remove a program.
4. Click Windows Media Player , and then click Remove.
If Windows Media Player is not displayed in the list of currently installed programs, then try the following:
. At the top of the list, select the Show updates check box.
2. In the Windows XP - Software Updates section, click Windows Media Player , and then click Change/Remove.
5. In each of the two confirmation dialog boxes that appear, click OK.
6. When the rollback process is complete (it might take several minutes), click Restart.
7. Click Start, and then click Control Panel.
8. In the Category View of Control Panel, click Add or Remove Programs, and then click Remove a program.
9. Click Windows Media Format Runtime, and then click Remove.
If Windows Media Format Runtime is not displayed in the list of currently installed programs, then try the following:
. At the top of the list, select the Show updates check box.
2. In the Windows XP - Software Updates section, click Windows Media Format Runtime, and then click Change/Remove.
If you installed a non-US English version of Windows Media Player , the instructions in the dialog boxes that are mentioned in steps 9, 0, and might appear in English.
0. In the first confirmation dialog box that appears, click OK.
. In the second confirmation dialog box that appears, select the Do you want to continue with the rollback? check box, and then click OK.
2. When the rollback process is complete (it might take several minutes to complete), click Restart.
3. Click Start, and then click Control Panel.
4. In the Category View of Control Panel, click Add or Remove Programs, and then click Remove a program.
5. Click Microsoft User-Mode Driver Framework Feature Pack .0.0, and then click Remove.
6. Follow the instructions that appear in the Software Update Removal Wizard.
If the Wudf0000 confirmation dialog box appears, click Yes to continue. When the software removal process is complete (it might take several minutes to complete), click Finish.
If you are still having problems and all else fails, do a System Restore to before WMP was installed.
*Note: If you remove Windows Media Player and the Windows Media Format Runtime, and then encounter error C00D27D ("A problem has occurred in the Digital Rights Management component. Contact Microsoft product support, you might be able to resolve the problem by installing the Windows Media Format 9.5 Runtime. For information about installing the Runtime, in the Microsoft Knowledge Base, see article 8922, "Update for Windows Media Digital Rights Management-enabled players."
**You might not be able to roll back to a previous version of the Player if the hidden folder $NtUninstallwmp$ is deleted from your computer. Some non-Microsoft programs (such as CCleaner) delete this folder in an attempt to remove unwanted files from your computer.
More information here:
http://www.microsoft.com/windows/win...ionofthePlayer
Some people have found these instructions to be a solution to the "Player Not Connected" Error when trying to update the firmware. (Your mileage may vary)
Note to Mods: This would make a nice stickyOK. I've been having this problem and have probably read every post there is on the net concerning it. But it doesn't seem to be only a Media Player problem. I was only running Media Player 0 when it happened to me. I found the solution somewhere, I can't remember where, but it worked for me and it was easy.
Here's what you do:
. Download BOTH ZenXtra_PCFW_LA__20_08.exe and enXtraP4SAudible_PCFW_LB_2_0_03.exe
2. Connect the Zen Xtra to your PC.
3. Run ZenXtra_PCFW_LA__20_08.exe. When the window comes up and says that your device is not connected DON'T do ANYTHING! Just leave it there.
4. Now run ZenXtraP4SAudible_PCFW_LB_2_0_03.exe
5. It told me that I already had this version on my device did I still want to load it's I said yes and it went through the whole upgrade and now it works fine. -
Creative Soft. doesnt recognize device, Windows Media Player does.. please he
I used the "Removable Storage" function to transfer a .doc file between my computer and another. Later, I wanted to organize the music already on the device using Zen Micro Media Explorer, but this program, nor Creative Mediasource, etc, recognized the device as being plugged in. At that time, I was not even in "Removable Storage" mode anymore, I even disabled it completely to see if that did the trick. Windows Media Player does recognize the device as being plugged in, and the device's LCD screen also displays it as "Docked".
What do I do? Please help me.bananazebra,
If you're using firmware 2.xx.xx then the primary application to sync with the player will be Windows Media Player 0. If you wanted to use MediaSource or Media Explorer then you will either need to download the Creative MediaSource Plugin for PlaysForSure devices or the correct Media Explorer that support PlaysForSure devices. Both are available at the download page.
Jason -
I have tried to transfer music from my windows 7 media player to my ipod.This is the first time i have tried to use my ipod on my new computer .In the media player it doesnt give me the option to add to itunes library it just give me the option to send to my ipod and when i do this it says that the device has stopped responding or isnt working.Any ideas? coz i aint got the foggiest where i am going wrong.My ipod keeps telling me to update the software,but then will i lose the music thats already on my ipod?
You should import the music (that is listed in Windows Media Player) into your iTunes Library - on your computer - to add it to your existing iTunes Library. I take it you have moved (or copied) your music from the old computer to the new computer, haven't you?
Then Sync your iPod to that Library.
iPods will not respond to Windows Media Player, they're designed to connect to iTunes. -
Using Windows Media player to view .3gp files
I really need help opening up a .3gp file that was sent from a cell phone. It said that I had to choose a file to open it with, and I chose Windows media player, but I keep getting this message.......Windows Media Player cannot play the file. The Player
might not support the file type or might not support the codec that was used to compress the file.
Can someone please tell me how I can correct this problem. I must see this video right away.
Thanks!Looking for a way to play 3GP or 3G2 files on your computer? If so,
there are a couple of ways you can do this. First of all, 3GP files are
usually movies that are taken from a mobile phone.
If you want to play these on your computer, you can either install a
codec or download third-party software to play these files. In this
article, I will try to mention all the different ways to play 3GP and
3G2 files.
Method 1 – Install Video Codec
Firstly, if you want to play 3GP files in Windows Media Player, you have to install one of the two following programs:
Haali media splitter
FFFDShow MPEG_4 Video Decoder
However, during the installation, you also have to select a specific configuration in order for it to work properly.
For FFDShow, you need to make sure that AMR is enabled on the Audio
Decoder screen and H263(+) is enabled on the Video Decoder screen.
For the Haali Media Splitter program, just make sure that the Enable MP4 support box is checked.
Method 2 – Convert File
The second way you can play these videos is to simply convert them.
This might be a better way so that you can play these videos on anyone’s
computer or stream them to devices like the XBox, etc. -
I am trying to set up my new replacement phone and the iCloud account is using my old email that is no longer activated, so I am not able to reset my password in order to set up messaging, etc. What do I do??
Try to change your Apple ID back to your old email address (http://appleid.apple.com) in order to set up and activate the phone. After the set up please sign out of iCloud and turn off "Find My iPhone" (Settings > iCloud) - do that on all your devices -, then change your Apple ID to your new address again and then add your iCloud account on you devices again.
-
Why are my .avi files extracted using PE3 only playing audio when using Windows Media Player?
I extracted a lot of my old movies using PE3 that came from my 8MM camera. They played fine on XP.
I now have Windows7 64 bit and when I play them in Windows Media Player, they only play the sound.
I'm guessing that this is a codec issue.
Should I re-extract them using a different product that uses a more standard codec?
Thanks!It depends on your workflow. So we'll need more details.
How did you digitize the video from your 8mm camcorder? Many devices capture as AVIs, but do so while using codecs that aren't universally playable. Also, do make sure you've got the latest version of Quicktime on your new computer. It can add some important video functionality to your computer.
You say you used Premiere Elements to "extract" your movie. How did you do this? Did you use a device like the ADS Pyro AV Link or Grass Valley Canopus AVDC?
Finally, are you trying to play the raw files or did you create a project with them in Premiere Elements and then Export/Share your video? And, if the latter, which output settings did you choose?
Meantime, try downloading VLC Player to your new computer and see if it can play the files. It is a much better player than Windows Media Player (or Quicktime Player, for that matter). And let us know yoru results.
As I've said, the more details you can give us, the more likely we can help you.
Maybe you are looking for
-
My ipad 4 doesnt connect at my school and I need it to work there. what do I do?
Hello My Ipad4 doesnt get connected at my school. What do I do? Thank you!
-
Warning when opening BridgeCS3 in Win7
I get this message every time I start BridgeCS3 on my new Win7 computer. I never got anything like that on my old XP computer or my Vista laptop. I always click "Yes" & haven't had any problems (that I'm aware of). Of course, I could check "Don't
-
Hello, I tried today spark datagrid and used the examples from Adobe Help. But when testing with Safari I have problems with the cursor. For instance when I resize the column width, I can't see the cursor anymore, I have to click first outside datagr
-
Hi All, I get an error in my code: "Thread is being stopped" It is an exception that is thrown and looks like it's got something to do with the RecordSet object. I am attempting to get the list of sales order drafts from the database. I want to conve
-
Photoshop CS5 filter gallery 'the operation could not be completed'
with photoshop cs5 i get for a specific regular user when selecting filter gallery the error message 'the operation could not be completed'. all other users on the same mac show no problems. ???