C028: Unable to connect to Siebel Gateway Name Server during Siebel Server

Hi,
I'm getting above error during Siebel Server Configuration when I run the Configuration Wizard
C028: Unable to connect to Siebel Gateway Name
Gateway name Server is up and running on same machine, Database Server is up and running on other machine and Application server machine can make connection to database machine through Oracle database client all Oracle net configuration entries are properly added in the Client TNSNAMES.ora file, the Siebenv.sh contain all necessary entries including ORACLE_HOME, bin path and lib32 path along with proper Oracle_sid entry and also I'm giving proper gateway name server credentials i.e of sadmin.
Here are the logs of the gateway name server
File Name:= NameSrvr.log
DBCLog DBCLogError 1 000000114dc910be:0 2011-05-10 18:26:32 523 80
GenericLog GenericError 1 000000114dc910be:0 2011-05-10 18:26:32 (secmgr.cpp (2679) err=4597538 sys=0) SBL-SEC-10018: 523 80
GenericLog GenericError 1 000000114dc910be:0 2011-05-10 18:26:32 (secmgr.cpp (2735) err=4597527 sys=0) SBL-SEC-10007: The password you have entered is not correct. Please enter your password again.
GenericLog GenericError 1 000000114dc910be:0 2011-05-10 18:26:32 (client.cpp (309) err=4597527 sys=0) SBL-SEC-10007: The password you have entered is not correct. Please enter your password again.
SisnTcpIp SisnSockError 1 000000114dc910be:0 2011-05-10 18:26:32 530: [TCPIP-server] recv() failed for sd=-1 (err=9 | Bad file number)
SisnTcpIp SisnSockError 1 000000114dc910be:0 2011-05-10 18:26:32 530: [TCPIP-server] send() failed for sd=-1 (err=9 | Bad file number)
File Name:- nameserver_audit.log
Timestamp Record Type Host Name ProcId Client Name User Name Key Name Value
2011-05-10 17:09:16 FailedLogin Siebelmachine 958544 java SADMIN
Kindly help me in identifying where I'm making the mistake as I've configured all necessary thing needed for Allpication Server Configuration upto best of my knowledge. Your help will be highly Appriciated.
Regards,
Abbasi

Abbasi,
This error message can be related with Doc ID 751784.1, here is the workaround suggested:
1. Stop all Siebel Enteprise components (Gateway/Siebel Server/Web Server)
2. Copy SIEBEL_ROOT/siebsrvr/IVSE.LIC to SIEBEL_ROOT/gtwysrvr/
3. Restart the Siebel Enterprise components
4. Use srvrmgr to confirm a connection to the Gateway Name Server can be made without error e.g.
srvrmgr /g gateway1 /e enterprise1 /u sadmin /p sadmin
If successful a message such as "Connected to 1 server(s) out of a total of 1 server(s) in the enterprise" will be displayed.
Hope it helps.
Wilson

Similar Messages

  • C028:unable to connect to siebel gateway name server

    Hi Siebel Guru,
    I am facing issue with C028:unable to connect to siebel gateway name server when i configuring a new enterprise for gateway name server.
    please help me out to sole this issue ASAP.
    Regards
    Prabhat

    HI
    I configured my gateway server with default port 2320.
    and my gateway server up and running mode.
    my port also listening.
    netstat -na | grep 2320
    tcp 0 0 0.0.0.0:2320 0.0.0.0:* LIST EN
    -bash-3.1$ list_ns
    started at Thu May 21 01:00:39 2009, pid: 5834, autostart: no
    -bash-3.1$ start_ns
    service is already running
    started at Thu May 21 01:00:39 2009, pid: 5834, autostart: no

  • C028 unable to connect to siebel gateway name server while enterprise installation

    Dear All,
    I am getting this error while setting up an enterprise in the gateway server.The configuration wizard is failing with the error
    "C028 unable to connect to siebel gateway name server"
    Kindly request to assist, the server needs to be delivered on priority
    I checked the gateway..cfg this seems to be fine and the gateway server is up and running.
    The name server log says the following,but the username and password of sadmin is same as configured in DB
    2021 2014-09-04 15:14:20 0000-00-00 00:00:00 +0100 00000000 001 003f 0001 09 GtwyNS 19368 1081086784 /data/siebel/sia811/gtwysrvr/log/NameSrvr.log 8.1.1 [21111] ENU
    DBCLog DBCLogError 1 0000000254084ba8:0 2014-09-04 15:14:20 ㈵″㐴8쾈䃬쯌䀔꼄ࢂ쯌䀔쾨䃬ȁ䀇꼄ࢂ,
    GenericLog GenericError 1 0000000254084ba8:0 2014-09-04 15:14:20 (secmgr.cpp (2679) err=4597538 sys=0) SBL-SEC-10018: ㈵″㐴8쾈䃬쯌䀔꼄ࢂ쯌䀔쾨䃬ȁ䀇꼄ࢂ,
    GenericLog GenericError 1 0000000254084ba8:0 2014-09-04 15:14:20 (secmgr.cpp (2735) err=4597527 sys=0) SBL-SEC-10007: The password you have entered is not correct. Please enter your password again.
    GenericLog GenericError 1 0000000254084ba8:0 2014-09-04 15:14:20 (client.cpp (309) err=4597527 sys=0) SBL-SEC-10007: The password you have entered is not correct. Please enter your password again.
    SisnTcpIp SisnSockError 1 0000000254084ba8:0 2014-09-04 15:14:20 1089268624: [TCPIP-server] recv() failed for sd=-1 (err=9 | Bad file descriptor)
    SisnTcpIp SisnSockError 1 0000000254084ba8:0 2014-09-04 15:14:20 1089268624: [TCPIP-server] send() failed for sd=-1 (err=9 | Bad file descriptor)
    DBCLog DBCLogError 1 0000000354084ba8:0 2014-09-04 15:14:20 ㈵″㐴8
    GenericLog GenericError 1 0000000354084ba8:0 2014-09-04 15:14:20 (secmgr.cpp (2679) err=4597538 sys=0) SBL-SEC-10018: ㈵″㐴8
    GenericLog GenericError 1 0000000354084ba8:0 2014-09-04 15:14:20 (secmgr.cpp (2735) err=4597527 sys=0) SBL-SEC-10007: The password you have entered is not correct. Please enter your password again.
    GenericLog GenericError 1 0000000354084ba8:0 2014-09-04 15:14:20 (client.cpp (309) err=4597527 sys=0) SBL-SEC-10007: The password you have entered is not correct. Please enter your password again.
    SisnTcpIp SisnSockError 1 0000000354084ba8:0 2014-09-04 15:14:20 1104309136: [TCPIP-server] recv() failed for sd=-1 (err=9 | Bad file descriptor)
    SisnTcpIp SisnSockError 1 0000000354084ba8:0 2014-09-04 15:14:20 1104309136: [TCPIP-server] send() failed for sd=-1 (err=9 | Bad file descriptor)
    DBCLog DBCLogError 1 0000000454084ba8:0 2014-09-04 15:14:31 ㈵″㐴8
    GenericLog GenericError 1 0000000454084ba8:0 2014-09-04 15:14:31 (secmgr.cpp (2679) err=4597538 sys=0) SBL-SEC-10018: ㈵″㐴8
    GenericLog GenericError 1 0000000454084ba8:0 2014-09-04 15:14:31 (secmgr.cpp (2735) err=4597527 sys=0) SBL-SEC-10007: The password you have entered is not correct. Please enter your password again.
    GenericLog GenericError 1 0000000454084ba8:0 2014-09-04 15:14:31 (client.cpp (309) err=4597527 sys=0) SBL-SEC-10007: The password you have entered is not correct. Please enter your password again.
    SisnTcpIp SisnSockError 1 0000000454084ba8:0 2014-09-04 15:14:31 1104309136: [TCPIP-server] recv() failed for sd=-1 (err=9 | Bad file descriptor)
    SisnTcpIp SisnSockError 1 0000000454084ba8:0 2014-09-04 15:14:31 1104309136: [TCPIP-server] send() failed for sd=-1 (err=9 | Bad file descriptor)
    Please let me know what else can be checked.Kindly request all to assist me because this server needs to be delivered asap.Let me know if more details is required. Please assist.I checked multiple possibilities even re configuring the gateway server :-( :-( 
    Regards,
    Pramodh

    Hi,
    i have the same problem, i want to use different schemas on db, i have the schema siebel/sadmin and other schema siebelA/sadminA, i'm installing siebel on linux redhat 6.5, and when i'm on Siebel Server Configuration and i write the user and passw sadminA/sadminA i get the error c028 C028 unable to connect to siebel gateway name server, i made the test by sqlplus using sadminA/sadminA and is ok, i made the test configuring to the schema siebel/sadmin and pass, i need to change some for siebel can work with another schema? i'm new here and i dont know if is correct to write my question here.
    Thanks in advance
    I add my gateway.cfg
    [InfraNameServer]
    EnableAuditTrail = FALSE
    [InfraSecMgr]
    SecAdptName = DBSecAdpt
    SecAdptMode = DB
    [DBSecAdpt]
    DBSecAdpt_SecAdptDllName = sscfsadb
    DataSourceName = ServerDataSrc
    DBSecAdpt_PropagateChange = TRUE
    [DataSources]
    ServerDataSrc            = Server
    LDAPSecAdpt              = LDAP
    [ServerDataSrc]
    Docked                   = TRUE
    ConnectString            = DemoEnt_DSN
    TableOwner               = SIEBELA
    DLL                      = sscdo90
    SqlStyle                 = OracleCBO
    MaxCachedCursors         = 16
    MaxCachedDataSets        = 16
    ReverseFillThreshold     = 100
    FileSystem               = /u01/app/siebel81/gtwysrvr/fs
    GatewayAddress           = awsdemo:2320
    EnterpriseServer         = DemoEnt
    CurrentSQLID             = %SQLID%
    MaxCursorSize            = -1
    PrefetchSize             = -1
    ChartServer              = localhost:8001
    ChartImageFormat         = png
    [LDAPSecAdpt]
    SecAdptDllName              = sscfldap
    ServerName                  = $(FQDNName)
    Port                        = $(Port)
    BaseDN                      = $(BaseDN)
    SharedCredentialsDN         = $(SharedCredentialsDN)
    UsernameAttributeType       = $(UsernameAttributeType)
    PasswordAttributeType       = $(PasswordAttributeType)
    CredentialsAttributeType    = $(CredentialsAttributeType)
    RolesAttributeType          = $(RolesAttributeType)
    SslDatabase                 = $(SslDatabase)
    ApplicationUser             = $(ApplicationUser)
    ApplicationPassword         = $(ApplicationPassword)
    HashDBPwd                   = $(HashDBPwd)
    PropagateChange             = $(PropagateChange)
    CRC                         = $(CRC)
    SingleSignOn                = $(SingleSignOn)
    TrustToken                  = $(TrustToken)
    UseAdapterUsername          = $(UseAdapterUsername)
    SiebelUsernameAttributeType = $(SiebelUsernameAttributeType)

  • CO28: Unable to connect to Siebel Gateway Name Server

    Hello.
    I'm trying to install Siebel on a WinXP machine to familiarize myself with the Case Management module from Siebel. I have tried many times, installing and uninstalling software. I keep getting this error message when configuring a new Enterprise. "CO28: Unable to connect to Siebel Gateway Name Server".
    I've shortened the hostname and removed dashes as prescribed in Siebel Bookshelf.
    I've always made sure the ODBC System DSN is working and authenticating correclty.
    Netstat shows gtwyns listening on 0.0.0.0:2320
    What am I missing?????

    Here's the log contents from sw_cfg_util.log:
    2021 2009-05-21 12:52:03 0000-00-00 00:00:00 -0700 00000000 001 003f 0001 09 sw_cfg_util 2992 1704 C:\sba8123\siebsrvr\log\sw_cfg_util.log 8.1.1 [21112] ENU
    GenericLog     GenericError     1     000000024a150bb0:0     2009-05-21 12:52:03     Error in transferring input values ,num of arrays incorrect 0, expected : 1
    GenericLog     GenericError     1     000000024a150bb0:0     2009-05-21 12:52:03     TransferInputsToValues returned error:3611539 to SetControlValues
    GenericLog     GenericError     1     0000031a4a150e34:0     2009-05-21 12:52:28     NSS - ErrCode 4597527 SysErr 0
    GenericLog     GenericError     1     0000031b4a150e34:0     2009-05-21 12:52:29     NSS - ErrCode 4597527 SysErr 0
    GenericLog     GenericError     1     0000031b4a150e34:0     2009-05-21 12:52:29     Validation failed : C028: Unable to connect to the Siebel Gateway Name Server 嗭粑୩୩୩୩୩୩୩
    GenericLog     GenericError     1     0000031b4a150e34:0     2009-05-21 12:52:29     ValidateFailed for Gateway Name Server TCP/IP Port, error : C028: Unable to connect to the Siebel Gateway Name Server 嗭粑୩୩୩୩୩୩୩
    GenericLog     GenericError     1     0000031b4a150e34:0     2009-05-21 13:18:49     Error in transferring input values ,num of arrays incorrect 0, expected : 1
    GenericLog     GenericError     1     0000031b4a150e34:0     2009-05-21 13:18:49     TransferInputsToValues returned error:3611539 to SetControlValues
    GenericLog     GenericError     1     0000031c4a150e34:0     2009-05-21 13:18:52     NSS - ErrCode 4597527 SysErr 0
    GenericLog     GenericError     1     0000031c4a150e34:0     2009-05-21 13:18:52     Validation failed : C028: Unable to connect to the Siebel Gateway Name Server 嗭粑୩୩୩୩୩୩୩
    GenericLog     GenericError     1     0000031c4a150e34:0     2009-05-21 13:18:52     ValidateFailed for Gateway Name Server TCP/IP Port, error : C028: Unable to connect to the Siebel Gateway Name Server 嗭粑୩୩୩୩୩୩୩

  • Unable to connect siebel gateway name server during configuration enterprise server

    Hi,
    when I try to configure Siebel enterpise after entering the port of the gateway server name I get the following error: "Unable to connect gateway server name".
    I perform the following steps:
    1) Configuration Gateway Server Name
         Entered port TCP/IP = 2320
         Enable automaticaly start server gateway name server
         Show pop up "Configuration siebel succesful"
    2) Configuration Enterprise Server
         Entered name account authentication gateway server name = SADMIN
         Entered passoword account authentication gateway server name = SADMIN
         Entered name host gateway server name = VDIMTNSIEBEL01 (name my machine)
         Entered port TCP/IP gateway server name = 2320
         show pop up error : "Unable to connect gatawey server name"
    I can not find the log file in order to understand the issue.
    When I try to connect to the gateway from the browser with the url
    vdimtnsiebel01:2320 I get this screen mode:
    ???@??????? ?????????? ????????QÈ  ??? ??????????? ??? ??? ? ?h????
    and writes this log in the file "C:\siebel\8.1.1.0.0\ses\gtwysrvr\log\NameSrvr.log
    SisnapiLayerLog Error 1 0000001151c810a0:0 2013-06-25 10:11:27   4980: [SISNAPI]: Rx msg len=0 peer=VDIMTNSIEBEL01.ISCVDI.LOCAL avail=325 Hello expected session=13
    474554202F66617669636F6E2E69636F
    20485454502F312E310D0A486F73743A
    207664696D746E73696562656C30313A
    323332300D0A557365722D4167656E74
    3A204D6F7A696C6C612F352E30202857
    696E646F7773204E5420362E313B2057
    4F5736343B2072763A32312E30292047
    65636B6F2F3230313030313031204669

    Hi,
    Please clarify me the following.
    You specified the login name as 'SADMIN'. Is this the login id, that you used for your Operating System? "Entered name account authentication gateway server name" expects you to enter the NT login, not the DB login.
    You may also expected to specify your network name, if your login id is specific to a network. e.g Oracle\Rajkumar assuming that Oracle is your network and Rajkumar is the user name.
    You may not expected to have the DSN created, as Gateway may not be interested in knowing which DB you are connected to. And you neither enter the 'DB name' anywhere in the 'Gateway Server Configuration', if my understanding is right.
    Please confirm.
    Below pages are for reference (not directly relevant to your question):
    http://docs.oracle.com/cd/B40099_02/books/SiebInstWIN/SiebInstCOM_Prep18.html
    Bookshelf v8.0: Requirements for Siebel Gateway Name Server Installation and Configuration
    Thanks.
    Regards,
    Rajkumar Raju

  • Unable to connect to siebel gateway name server .

    unable to connect to siebel gateway name server .
    erro log:
    [TCPIP-client] failed to resolve hostname: siebel82 (err=852198 | Internal: gethostbyname_r ()failed with error. (%sysError))
    //1
    commonutil ValidateSiebelGateway sadmin password 192.168.0.82:2320 // return true
    commonutil ValidateSiebelGateway sadmin password siebel82:2320 // return false
    commonutil ValidateSiebelGateway sadmin password siebel82.cc:2320 // return false
    //2
    [oracle@siebel82]$ ping siebel82
    PING siebel82.cc (192.168.0.82) 56(84) bytes of data.
    64 bytes from siebel82.cc (192.168.0.82): icmp_seq=1 ttl=64 time=0.038 ms
    64 bytes from siebel82.cc (192.168.0.82): icmp_seq=2 ttl=64 time=0.050 ms
    //3
    [oracle@siebel82]$
    ping siebel82.cc
    PING siebel82.cc (192.168.0.82) 56(84) bytes of data.
    64 bytes from siebel82.cc (192.168.0.82): icmp_seq=1 ttl=64 time=0.036 ms
    64 bytes from siebel82.cc (192.168.0.82): icmp_seq=2 ttl=64 time=0.050 ms
    //4
    [oracle@siebel82]$ nslookup siebel82.cc
    Server:          192.168.0.82
    Address:     192.168.0.82#53
    Name:     siebel82.cc
    Address: 192.168.0.82
    //5
    [oracle@siebel82]$ nslookup siebel82.cc
    Server:          192.168.0.82
    Address:     192.168.0.82#53
    Name:     siebel82.cc
    Address: 192.168.0.82
    //6
    [oracle@siebel82 bin]$ uname -a
    Linux siebel82.cc 2.6.32-100.34.1.el6uek.x86_64 #1 SMP Wed May 25 17:46:45 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux
    //7
    Installed Top-level Products (2):
    Siebel Enterprise Server 8.2.2.0.0
    Siebel Enterprise Server - enu 8.2.2.0.0
    Thank you for any tips.

    check the connect string in eapps.cfg

  • C028: Unable to connect to siebel gatway name server"

    Hi,
    We are using Oracle enterprise linux 6.3 version OS for siebel 8.1.1.7 siebel installation on oracle database.
    I have installed the siebel gateway name server, but while installing enterise, it is erroring out during the gateway name server authentication.
    Points ot note. checked all the below options
    1. db connectivity is working fine wt SADMIN/SADMIN user. able to conect using sqlplus
    2. able to ping the gateway port using netstat.
    3. the oracle client is a 32 bit client.
    Also there is gateway.cfg file missing from gtwysrvr/bin. but the gateway service is up and running and the process is pointing to the gateway.cfg in the bin file. .
    Please suggest.
    Thanks,
    Vinod.

    Vinod,
    Check if Doc ID 1391312.1 on support.oracle.com is helpful.
    Thanks,
    Wilson

  • Siebel Gateway Name Server configuration error

    Hi,
    I installed Siebel 8.1.1.10 in Oracle Enterprise Linux 5.9. And use following command lines to configure Siebel Gateway Name Server.
    /opt/siebel/8.1.1.0.0/ses/gtwysrvr/cfgenv.sh
    /opt/siebel/8.1.1.0.0/ses/config/config.sh -mode enterprise
    After some steps, the Configuration Wizard prompted 'Siebel Configuration Wizard failed with error. Please see the log files for details'.

    You can try to use locate and search for: *.log
    Tips For Linux - How to find files in Linux using 'locate'

  • Configuring Siebel Gateway Name Server on Linux 64 bit OS

    Hello Siebel Experts,
    I am currently installing Siebel 8.1.1.11 on a Linux 64-bit machine. After successfully completing the installation steps, I am proceeding with the configuring the server and its components.
    I am starting with the configuration of Siebel Gateway Name Server as per the instructions mentioned on the url:
    Bookshelf v8.1/8.2: Configuring the Siebel Enterprise
    I completed steps 1 and 2 and started executing step 3: Start the Siebel Enterprise Configuration Wizard.
    I provided all the necessary information till the summary information is displayed.
    However when I click next, it immediately gives an error.
    >>Siebel Configuration Wizard fails with error. Please check the log files for details.
    I searched for the log file in $SIEBEL_ROOT/cfgtoollogs/cfg/config_<date-time>.log
    However there is no error information in this log file. It contains just INFO, SECTION, STEP or ATTRIBUTE mappings/values.
    I could not find any .err file in this directory. Can you please let us know how to identify the error and debug this issue?
    Thanks in advance.
    Regards,
    Sadath

    Hi
    Thanks for your inputs.
    I have executed the said command and captured the output in the below file:
    https://docs.google.com/file/d/0By7-5z2zbQo9MUd5ek1mdTh1SU9yUzlZRzc2eDlFZFNrczR3
    I also executed env command and following is the output:
    [telkom@ucm1 bin]$ ./evt
    Running checks defined in file [evt.ini]. Please wait..
    ▒1990, 2006, Oracle. All rights reserved. The Programs (which include both the software and documentation) contain proprietary information; they are provided under a license agreement containing restrictions on use and disclosure and are also protected by copyright, patent, and other intellectual and industrial property laws. Reverse engineering, disassembly, or decompilation of the Programs, except to the extent required to obtain interoperability with other independently created software or as specified by law, is prohibited.
    Environment Verification Summary Report for [ucm1.cx.dev.telkom.co.id]
    Report Run by [telkom] on [Thu Jul 17 12:30:12 2014]
    Installed Version [NOT DETECTED] Installed Build [NOT DETECTED]
    Running a [8.1.1.9] version validation with [VAN] flavor
    Total Checks  : 4
    Checks Passed : 1
    Checks Failed : 3 (0 critical failures, 3 warnings)
    Checks Skipped: 0
    Critical Failures:
    Complete list of checks:
    Environment Settings
    The highest Operating System that we have certified is 2.6.32-100.37.1.el6 - the current version you are running is 3.8.13-35.1.2.el6uek.x86_64
    The current value of SIEBEL_OSD_LATCH is not defined
    The current value of SIEBEL_OSD_NLATCH  is not defined
    Environment variable SIEBEL_MEMORY_ALLOCATOR has correctly not been defined
    This exe file was created with the evaluation version of Perl2Exe.
    For more information visit http://www.indigostar.com
    (The full version does not display this message with a 2 second delay.)
    [telkom@ucm1 bin]$
    Thanks,
    Sadath

  • Siebel Gateway Name Server Configuration Wizard returns "Execution failed"

    Hi,
    I am installing Siebel 8.1.1.1 on Linux platform and now having problem while trying to configure Siebel Gateway Name Server.
    Steps done:
    1) DB instance prepared
    2) Created Siebel installation image
    3) Installed Siebel server and configured Gateway name server (the wizard started automatically as part of the installation). Skip configuration of Enterprise and SWSE Logical profile
    4) Ran DB Configuration Wizard for the primary language - successfully. Import repository-add language - successfully.
    5) Trying to Wizard "Configure Enterprise" - failed with "Execution failed"
    Here I thought that probably Gateway Nameserver was not configured and decided to remove the Gateway and create it from scratch.
    Unfortunately this time the Gateway configuration failed. Also with message"Execution failed"
    Here are the errors I got in the log files sw_cfg_util*.log
    <EF><BB><BF>2021 2012-01-25 16:14:56 2012-01-25 16:14:56 +0200 00000002 001 003f 0001 09 sw_cfg_util 17234 -1215752512 /OraSSO_tstcol/siebapp/server/siebsrvr/log/sw_cfg_util.log 8.1.1 [21111] ENU
    GenericLog GenericError 1 000000024f204352:0 2012-01-25 16:14:56 (svrconfig.cpp (2465) err=3023557 sys=0) SBL-CSO-08901: The required arguments are not specified.
    GenericLog GenericError 1 000000034f20432e:0 2012-01-25 16:14:56 Executing step: CreateGateway
    GenericLog GenericError 1 000000034f20432e:0 2012-01-25 16:14:58 Step CreateGateway: failed to run program %%SiebelRoot%%%%OSDirSeparator%%bin%%OSDirSeparator%%srvrcfg with cmdline -u nouser -p nopassword -r %%SiebelRoot%% -g %%SiebelRoot%%%%OSDirSeparator%%sys%%OSDirSeparator%%siebns.dat::NSFILE: -r %%SiebelRoot%% -a gateway -l %%PrimaryLanguage%% -i %%SiebelRoot%%%%OSDirSeparator%%admin%%OSDirSeparator%%gtwydefs.dat
    GenericLog GenericError 1 000000034f20432e:0 2012-01-25 16:14:58 Failed during Execution, err: 5500044
    Does anybody know what is the reason?
    Searching in Metalink and Google were fruitless..
    Thank you in advance.

    Just in case anybody bumps in this thread:
    The problem in my case was solved according with Oracle Note "Delete and create the "Siebel Server" via Configuration Wizard on Linux, it failed. [ID 880562.1]"
    Applies to:
    +Siebel CRM - Version: 8.1.1 SIA [21111] and later   [Release: V8 and later ]+
    Linux x86
    Symptoms
    Delete the "Siebel Server" once and then create a new "Siebel Server" via Siebel Server Configuration Wizard on Linux, it failed with message "Execution Failed".
    The error on sw_cfg_util_xx.log is as follows,
    GenericLog GenericError 1 0000ce524a3a1bd2:0 2009-06-19 10:18:33 Executing step: AddSrvrRegistryEntry
    GenericLog GenericError 1 0000ce524a3a1bd2:0 2009-06-19 10:18:35 Step AddSrvrRegistryEntry: failed to run program %%SiebelRoot%%%%OSDirSeparator%%bin%%OSDirSeparator%%siebctl with cmdline -r %%SiebelRoot%% -q -S siebsrvr -i "%%SiebelEnterprise%%:%%SiebelServer%%" -a -g "-g %%SiebelGateway%% -e %%SiebelEnterprise%% -s %%SiebelServer%% -u %%Username%%" -e %%Password%%
    GenericLog GenericError 1 0000ce524a3a1bd2:0 2009-06-19 10:18:35 Failed during Execution, err: 5500044
    Reproduce steps:
    - confirm that siebel server was created before, and is stopping.
    - create sh env and enter the following command to remove the Siebel Server.
    +$ cd $(SiebelServerRoot)+
    +$ . ./cfgenv.sh+
    +$ cd $(SiebelServerRoot)/bin+
    +$ ./ssincfgw+
    - select "3 - Remove Existing Configuration".
    - complete the configuration wizard.
    - enter the following command to create the Siebel Server.
    +$ cd $(SiebelServerRoot)+
    +$ . ./cfgenv.sh+
    +$ cd $(SiebelServerRoot)/bin+
    +$ ./ssincfgw+
    - select "1 - Create New Configuration".
    - continue inputs to finish and execute the configration.
    +==> you'll find "Execution Failed".+
    Cause
    AddSrvrRegistryEntry section shown in the log is the command for registering the Windows Service, and it is no need to execute on Linux env. However, it is executed and it failied.
    Solution
    You can do either of follows,
    +(1) Uninstall and Install the Siebel Server again.+
    +(2) The section to execute the Windows registeration command is specified on $(SiebelServerRoot)/admin/common.scm, line 2475-2477.+
    +[Step]+
    Name = AddSrvrRegistryEntry
    Type = RunProg %%SiebelRoot%%%%OSDirSeparator%%bin%%OSDirSeparator%%siebctl ' -r %%SiebelRoot%% -q -S siebsrvr -i "%%SiebelEnterprise%%:%%SiebelServer%%" -a -g "-g %%SiebelGateway%% -e %%SiebelEnterprise%% -s %%SiebelServer%% -u %%Username%%" -e %%Password%% '
    So, delete the AddSrvrRegistryEntry section from common.scm, and execute Configuration Wizard again.
    Edited by: mmango on Jan 31, 2012 12:21 AM

  • Unable to connect to SAP gateway to RFC server failed(hostname unknow)

    Hi All,
    I am trying to create a new Model(to connect to SAP R/3 server) using the following steps:
    1.Selecting Import Adaptive RFC Model
    2.Entering Model name,package,default logical system names
    3.Selecting the single server option and giving the details of the SAP R/3 server.
    When I try to connect it gives me the following error :
    -Connect from SAP gateway to RFC server failed.
    Also it mentions :
    <b>"ERROR hostname 'sapR3' unknown "</b>
    Where <b>sapR3</b> is the entry corresponding to the IP address in the host file.
    Further I am able to establish a telnet session using the same hostname in command prompt.
    I have searched the Internet for solutions, but I haven't found any yet.Any ideas?
    Regards,
    Kshitij Agrawal

    Hi,
    Please check if the hostname that you specify in the "Reimport Model" GUI of NWDS matches with the application server name specified in your R/3 system.The same can be verified by following three simple steps:
    1) Open the SAP LogOn.
    2) Choose the server to which you wanted to connect and right click on it to get the "properties" in the context menu.
    3) Look for the value entered in the field "Application Server" in the properties window.
    Hope this helps.

  • AIM app Unable to connect on specific screen name

    It is able to work on a previous screen name I have used in the past, but my main name is unable to connect for some unknown reason. I receive one of two messages:
    No connectivity
    Or
    Too many login attempts, wait to log in again (this happens because the app attempts to reconnect over and over and over again very quickly)
    Both AIM and IChat on my computer will login with the screen name. I have attempted to find help on the AIM website, and on my account options, but have not been successful.
    I am using an Itouch second gen with 2.2

    R29,
    Does the same issue occur when you try connecting to different networks? For example, you could try different WiFi networks or EDGE/3G.
    A similar symptom with iChat has made it's way to discussions in the past:
    http://discussions.apple.com/thread.jspa?threadID=1498265
    Since I cannot see a way to edit the ports on the iPhone app, you may try submitting this feedback to the AIM app developer via the iTunes Store. I would also try the other troubleshooting steps in this article:
    Troubleshooting applications purchased from the App Store
    http://support.apple.com/kb/TS1702
    Hope this helps,
    Raleigh

  • "unable to connect to the data access service" installing report server

    Trying to do a 2 server SCOM 2012 R2 install on Server 2012 w/SQL 2012.  Management server and operations console on one, and SQL, web console, and reporting server on the other.  When I get to the web console and reporting server install, and
    the "Specify Management Server" screen, I input the 1st management server name and it gives me a red X with the message:
    "Unable to connect to the Data Access service for this management server. Ensure the Data Access service is running and that the service, the management group, and setup are all the same version."  
    Here is the setup log error:  
    "Info: :Could not connect to Management Server: scom-app with exception: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or
    too long."
    I don't see the "Data Access" service in services on either server.  I followed all of the setup prereqs in SCOM 2012 unleashed book, and also referenced this article for setup advice:
    http://blogs.technet.com/b/kevinholman/archive/2013/01/16/opsmgr-2012-sp1-quickstart-deployment-guide.aspx
    Everything seems to be working until I get to this point. 
    Thank you for any help you can provide,
    Dan

    Hi Tom,
    1. Did the setup complete successfully on the MS and Console server?
    >>>Yes, without issue
    2. You do not see the service "System Center Data Access Service"
    >>>I do indeed see it on the MS and Console server, it is set to Auto and running.  (I also tried rebooting this server and retried, no help)
    3. Is the Windows Firewall enabled?
    >>>It has symantec endpoint protection.  I disabled symantec completely on both servers and retried, no help.
    Thx,
    Dan

  • Unable to connect to Internet via Airport Express - 'cannot contact server'

    I'm unable to connect to the internet via my Airport Express. I'm using OS 10.3.9, and had the same setup with no problems at a previous address, but with a different modem from the same ISP.
    My AE is connected - the light is green - and my mac is connected to the network in Internet Connect. But when I open Safari I get an 'unable to contact server' message.
    I've tried rebooting everything (modem, AE, Mac), and leaving modem/AE off for several minutes. Also reset the AE, but to no avail.
    The connection works fine via Ethernet cable.
    Any ideas?

    Thanks, I checked out that advice doc (106798), but could not connect to the address (http://17.149.160.49) which is given to test if it's a DNS issue. My ISP says I shouldn't need DNS settings.
    The service is PPPoE, and I went into Airport Admin Utility to check if the Airport was configured for this. Under Configure/Internet, I found it was set to 'Ethernet', so changed it to PPPoE. Then when I restarted I got connection status in the bar (and good Airport signal), but status flipped between 'looking for PPPoE host' and 'negotiating PPPoE host', sometimes sticking on one or the other each time I tried rebooting all gear.
    Any other ideas?

  • CJS-30196  Connect to SAP gateway failed: Error during installation

    Dear Experts,
    Please Help me with the following error i am getting during installation of ECC6 with MAXDB,
    ERROR 2009-08-04 08:28:43
    CJS-30196  Connect to SAP gateway failed
    Connect_PM  TYPE=A ASHOST=node1 SYSNR=03 GWHOST=node1 GWSERV=sapgw03 PCS=1
    LOCATION    CPIC (TCP/IP) on local host with Unicode
    ERROR       partner 'node1:sapgw03' not reached
    TIME        Tue Aug 04 08:28:43 2009
    RELEASE     700
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -10
    MODULE      nixxi.cpp
    LINE        2764
    DETAIL      NiPConnect2
    SYSTEM CALL connect
    ERRNO       10061
    ERRNO TEXT  WSAECONNREFUSED: Connection refused
    COUNTER     1
    ERROR 2009-08-04 08:28:43
    FCO-00011  The step createADSUser with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|5|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_ADS|ind|ind|ind|ind|2|0|createADSUser was executed with status ERROR .
    Regards,
    Ritesh Bhatia

    Hi Guys,
    I am installing Ecc6 on my laptop. While installing i have got a below error...
    ERROR 2012-01-24 06:58:02
    CJS-30196  Connect to SAP gateway failedConnect_PM  TYPE=A
    ASHOST=ecc6 SYSNR=04 GWHOST=ecc6 GWSERV=sapgw04 PCS=1LOCATION   
    CPIC (TCP/IP) on local host with UnicodeERROR       partner
    'ecc6:sapgw04' not reachedTIME        Tue Jan 24 06:58:02
    2012RELEASE     700COMPONENT   NI (network interface)VERSION   
    38RC          -10MODULE      nixxi.cppLINE        2764DETAIL   
      NiPConnect2SYSTEM CALL connectERRNO       10061ERRNO TEXT
    WSAECONNREFUSED: Connection refusedCOUNTER
    ERROR 2012-01-24 06:58:02
    FCO-00011  The step createJSF with step key
    NW_Onehost
    ind
    ind
    ind
    ind
    0
    0
    NW_Onehost_System
    ind
    ind
    ind
    ind
    1
    0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind
    |ind|ind|ind|3|0|createJSF was executed with status ERROR .
    Could you please provide some solution for this?
    with regards
    Vinayak

Maybe you are looking for

  • Results view does not display any data

    Hi Every time I execute a query in the sql worksheet, I do not see anything in the results view. I only see the ouput in the output script folder. The output script view display is just like the usual sqlplus screen results. I want to look at the res

  • How to fit the footer always to bottom page

    How to fit the footer always to bottom page. Regards

  • Multiple plugins in one project

    Hi, I want to have two plugins in one (visual studio) project (on windows). I know the pipl should have two blocks with two different entry points, but what is the entry point? And how can I know what filter should I run? Thanks, Inbal

  • Alert warning - Can't contact spell checker

    Does any one else have this problem when using Pages? The alert notice comes up on the screen repeatedly and then causes Pages to freeze. It is most frustrating. I have reloaded iWorks, downloaded all the update but nothing seems to change. Help any

  • NO PRIME v2

    Does anyone know of any compatibility issues between NCS Prime 2.0 And the 5508 HA controllers running 7.3.x.x Sent from Cisco Technical Support Android App