C03-01 doesn't connect to car kit

Hi all,
i have this problem: my C03-01 cannot find my Audi TT car kit by bluetooth..it finds easily other kits (like on Nissan cars), but not on my new car... any suggestion?
Thanks

@voorst
Your C3-01 has apparently been tested as compatible with your TT upon this microsite:http://microsites.audi.com/ngw_assets/mobile_db/en_UK/index.html
Happy to have helped forum with a Support Ratio = 42.5

Similar Messages

C7 - Bluetooth connection with car kit - problem

Hi all,
Can anyone help me about my problem. I bought new phone Nokia C7 with Anna software and I have a problem with pairing with my car (Bluetooth device Parrot CK3000 Evo). I think that the problem is with phone, because when I paired devices all things work well, but when I turn off the car (Parrot is switched off) and go away, other phones that I previously used disabled connection and can be used normally. But with this phone I see that for the phone connection still present (?!?) The car symbol on display still shown, and when I try to use the phone, I can make call, other people say that they receive calling , but I can't hear them, and they can't hear me. When I manually disconnect Bluetooth device, phone work normally, but when I am in the car again, two devices doesn't initiate pairing, and again I have to do this manually. It' a huge problem for me.
Is there anyone who have the same problem, or anyone who know how to solve this. I couldn't find option to solve this from menus.
Any ideas?
Unfortunately my warranty doesn't allow me to change software version from 022.014 to another... but if this will help...

Thank you for your reply,
Do you think, that the solution is new update for Parrot device?
As I understand, you still have the problem and your hope is this update eventually.
Do you read somewhere something about this?
I have registration in Parrot forum, but I haven't read inside anything about the problem . It looks, that they never heard about it...

Cannot connect to bluetooth car kit - is invisible

For some time Blackberry 8100 under OS 4.2 functioned fine with Audi bluetooth car kit.
Now with a new Blackberry 8110 under OS 4.3 the same car is not detected.
Other phones and printer can be connected to OK by bluetooth.
Wondering if the car has a problem a connection was successfully made with another phone.
Please can anyone help?
Merci.
Pem

That is sometimes the case if you want to download your contacts to the car. No problems when using it purely a handsfree.
Personally I have never had to use any software and all my N Series phones including my current N96 have always connected to car kits. Sometimes it does take a few attempts before it downloads all the contacts but that's it.
Message Edited by cjlim on 13-Oct-2009 09:26 AM

Car kit adapter

I have just replaced mt 6230 with a 6700 classic. My car has a car kit for the 6230 and I was wondering if I can somehow adapt that kit for the 6700. I would rather not rip it all out and start again with a new kit.
I do not know what model kit I have but the cradle says CR-56 and is connected by a plug. Ideally I would like to buy a new cradle that will work with the 6700 and plug that in instead. Is that possible?
Thanks for any help.

Modern Nokia phones with Mini-USB or Micro-USB connectivity instead of the old 'pop-port' do not have cable connectivity with car kits, only Bluetooth connectivity, so you will not be able to connect the same way you did with the 6230.
You do not say which car kit you have (the cradle is specific to the phone, not the car kit, so its part number doesn't help), but if it is Bluetooth-enabled it may work with the 6700, otherwise you might not have a choice but to replace the kit.

Bluetooth not connecting to car kitt

hi anybody having same problem, my iphone 4s is having trouble connecting to car kit [ seecode vosser] have connected two other iphones to this car kitt with no problems whatsoever. anybody?

I am having the same problem with Seecod Vossor. Any solution?

Nokia C7-00 & Kufatec FISCON Bluetooth Car Kit

Hello everybody!
I just updated my C7-00 with latest Symbian Anna 022.014.
Very nice user interface, updated browser, all applications 100%-compatible.
I do have a serious problem with my Bluetooth car kit (Kufatec FISCON using CK5050+ chipset, SW 3.23.5). The phone pairs with the kit, synchronizes content (contacts and call registers). When I disconnect (turn off ignition and leave the car), the phone hangs and displays the bluetooth connection as already established.
Things were working very well with latest Symbian version (014.XXX).
I think this is a bug in Anna Bluetooth stack. Does anyone have any clue?
The problem occurs once the phone contacts are synchronized with the car kit.
When I disconnect just after pairing (before complete synchronization) the phone behaves normally (ie. connection is dropped).
Is it possible that the phone does not complete disconnect request from car kit?

Hello,
Did you solve the problem?
Too late I saw your post, but my problem is completely the same:
/t5/Cseries/C7-Bluetooth-connection-with-car-kit-problem/td-p/1192491

E60 car kit bugs

When connected to the CK7W the E60 does not select car profile, nor does the control button End/Snd work.
Also, as there is no separate car profile the kit uses the ring tone level set when used as a mobile and is deafeningly loud.
When an SMS is received the alert tone is painfully loud.
When is there going to be support for car profile on the E60 ?

I don't have any trouble with the car kit profile on my E60 (before or after the latest firmware update).
I created a new profile you can set your tones, volumes, etc and call it "car kit". Then under Setting>Connections>Enhancement>Car Kit I selected the new "car kit" profile and set light to "on". My phone properly switches to the car kit profile when I insert it into the CR-26 holder and the light stays on like it should.
BUT, I agree that the remote button does not work. It will not initiate the Voice Command function to dial or do anything other than control the volume. All the functions work properly with Bluetooth but not when in the cradle...

N95 drops connectiohn to 616 car kit

Hi
I've had a 616 car kit working reasonabley well with my N80 in sim access mode for almost a year - it occasionally lost connection and I had to restart the car kit to re-establish the connection. I've had an N95 for 2 days and both days within about 5 minutes of connecting the car kit shows lost connection with N95 and the phone has no signal indicator there is just the 3G at the bottom. It does show it is in remote sim mode. The only way to get it working is to switch off and restart the phone.
Anyone else having this problem or is it just me?
Andy

Just to add weight to this thread I have the same problem, reliable operation with N80, but my N85 sometimes gets into a state where the phone is stuck halfway into remote SIM mode and the 616 cannot connect.
I have to turn off the car kit, turn off the phone, turn the phone back on, then finally reboot the car kit and it usually, but not always, comes abck up.
This often seems to happen when I have had the car unlocked, but the ignition not on, so the car kit may have tried to start but not fully, though this could be coincidence, would love to hear if anyone finds a solution for this!!

Car kit automatic A2DP connection

I'm not entirely sure if this is a problem on my phone, or with the car kit, but I figured if I post on both ends, someone might know the answer.
With my N95 and N97, as soon as I turn on my car (equipped with Nokia CK-100), I automatically get connected to BT HFP and A2DP profiles. The car kit will tell me, "Phone connected." A second later, "Player connected." With the N8, the car kit will only connect to just the phone automatically. For the player to connect while the car is on, I have to open up the music player and play a song, which will then force N8 to make the A2DP connection. So when that happens, you hear a 1.5 second message saying, "Player connected" followed by music that is already 2 to 3 seconds into the song. I thought it was perhaps the Car Kit getting full with the list of paired devices (memory is for 8 pairings), but clearing the list doesn't help. I thought it was the Car Kit firmware, so I upgraded it to 4.401, no luck. Then when I paired my old N97 and N95, both HFP and A2DP connections were made automatically when I boot up my car as expected! But not the N8.
Problem with the Car Kit, or problem with S^3?
John @ Chicago // 5160 (1999.07.20) > 7160 (2001.06.09) > 6340i (2003.04.26) > 6620 (2004.08.24) > 7610b (2005.05.08) > N91 (2006.06.07) > N95-3 (2007.09.28) > N95-3 #2 (2007.12.05) > E51 (2008.03.10) > N97 (2009.06.11) > N97 #2 (2009.09.11-warranty replacement) > N97 #3 (2009.12.10-warranty replacement) > N8 (2010.12.02) > N8 #2 (2010.12.11-retailer replacement) > 808 (2012.12.10) > X2 Dual Sim (2015.01.19-for motorcycle offline maps use only) %gt; 808 #2 (2015.01.26-manufacturer replacement)

The N8 on PR1 is still not a good excuse for the many bugs that it has. It's just unimaginable that something that worked solidly with S60v3 and S60v5 and suddenly with the improved Symbian OS a mature and functional feature suddenly has a bug? I just don't understand how that could've made it into the N8. Is it the OS? Or is it the BT chipset? In either case, quality control got missed.
Thanks, though, for letting me know that I'm not the only one to experience this. I'll stop trying to fix this as this is a problem outside of my control.
John @ Chicago // 5160 (1999.07.20) > 7160 (2001.06.09) > 6340i (2003.04.26) > 6620 (2004.08.24) > 7610b (2005.05.08) > N91 (2006.06.07) > N95-3 (2007.09.28) > N95-3 #2 (2007.12.05) > E51 (2008.03.10) > N97 (2009.06.11) > N97 #2 (2009.09.11-warranty replacement) > N97 #3 (2009.12.10-warranty replacement) > N8 (2010.12.02) > N8 #2 (2010.12.11-retailer replacement) > 808 (2012.12.10) > X2 Dual Sim (2015.01.19-for motorcycle offline maps use only) %gt; 808 #2 (2015.01.26-manufacturer replacement)

Can't connect to our new car kit

Bought a Blue Ant supertooth 3 car kit. All the other phones in the house work with it except the palm 700p verizon. The only thing I can think of is that the palm doesn't ask for the pass key to be entered. It finds the kit, tries to connect then says unable to add to your trusted list.
Just tried it again for the 20th time, now it asks for the passcode but when I enter it it still says can't add to trusted devices??
any ideas?
Post relates to: Treo 700p (Verizon)

Hello!
First make sure the car kit is NOT in the trusted list already. In you bluetooth application on the Treo, go into the bluetooth application and then tap on Setup Devices. From there, tap on trusted devices button. If any car kit, including your blue ant, is there, delete them and hit done. Afterwards, soft reset the deice and try to resetup again. This time when you perform the setup via the phone, make sure your searching for "Nearby Devices" and not "Trusted Devices" or "Known Devices" and see how that fairs.
If nogo, then hotsync the phone to backup the content and then hard reset the Treo. Right after the hard reset, try to pair to the bluetooth device again without yet rehotsyncing.
Also make sure you are using the 1.10 software version on the Treo. Go here for additional info on software version and update if needed.
Post relates to: Treo 650 (Unlocked GSM)

Z10 not always connecting to mybluetooth Parrot V5.25c car kit

Please can someone advise if there is a BB Z10 software upgrade to connect to Parrot V5.25C and V5.21C car kits. My Curve and Bold 9800 never had an issue with either, but Z10 sometimes wil connect but mostly doesn't? Please advise how to resolve this issue

Hello GlennCZA,
Thank you for your question regarding connecting your BlackBerry Z10 smartphone to your car kit.
Have you tried deleting and recreating the Bluetooth pairing profile? Is the issue stricly with the initial connection? Does the connection drop once connected?
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

Problem connecting a 6310i to a CARK-112 car kit

Hi,
I'm trying to connect a 6310i to my CARK-112 car kit.
The Nokia phone detects the car kit as "Carkit 112" but when I hit select to pair with it I do not get the option to enter a passcode, instead it displays "device not available"
The car is secondhand and had the car kit previously fitted, I have located the brain and have the appropriate 4 digit passcode.
Anyone done it or can help me?
John.

It sounds like the cark-112 has all the connections full, you will need to reset the car kit. Press and hold the buttom for 5 seconds and you should hear a long bleep. Try this with ignition off.
Danny b
Nokia Accredited Installer
If my answers help you, give me a Kudos. Its like a pat on the back.

Connecting 8800 to a Noki car Kit

Does anybody know how to connect up to a Nokia car Kit. When I try and pair via bluetooth to the device it recognises the car kit but says that it cannot connect. Is there a compatability problem? Thanks Conker

Hi blueballzzz
You do need to check that the serial number begins with 'K' or 'L' then the HFU-2 has been made after 2003 and will therefore support handset charging.
I think you need a Nokia CA-55 cable, but I may stand corrected: http://www.nokia.co.uk/A4222100
Antenna connector is a seperate issue.
Happy to have helped forum in a small way with a Support Ratio = 37.0

BB Z10 can`t connect to my bluetooth hans free car kit

I was reading a lot of forums, web pages, etc... and i cant find the anwers to my problem...
I bought a new Z10 and i cant connect to my car via bluetooth.. I have a Audi Kufatec Fiscon Car kit, integrate with the radio and with the multifuncional sterling wheel ...
I have the last version of OS 10 (10.1.0.273)
Any advice will be apreciate...
Thank You

This might help
http://nickscarblog.com/diy/fiscon-bluetooth-retrofit-audi-a4s4-with-rns-e/
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Connecting two mobile to the one bluetooth car kit...

Is it possible to connect two mobile phones to the same bluetooth car kit at the same time?

I dont think its possible, i may be wrong, but imagine if both phones were connected to the car kit and they both got a phone call, there is no way it would work as it would not know what phone to connect.
So i dont think its possible.
My posts are my opinion and in no way the direct views of Nokia.
If my posts are helpful, please give me some KUDOS using the green star on the left.

C03-01 doesn't connect to car kit

Similar Messages

Maybe you are looking for