C1-02 Sound heard from Earpiece and Speaker both e...

I recently bought C1-02 with FW 3.40, later I updated to FW 5.40. The problem is that the sound from Earpiece is being heard from back speaker also, without turning the speaker ON.
If I turn ON the speaker, there is no difference. When I play music from Speaker, its even heard from the earpiece.
Is this a flaw in the c1-02 model or firmware or just my phone?
If the flaw is in the model, Will there be a firmware update to fix this issue or is this a hardware flaw?

Sounds like a problem in your phone, it's definitely not a model issue.
Have your phone checked in a Nokia Care Point.

Similar Messages

Sound Coming Through Earpiece and No Speaker

Has anyone else had this issue? Sometimes the sound switches from the speaker to the earpiece and the only way to get the sound to come out of the speaker again is to reset the phone. I've tried plugging in headphones and removing them but the sound goes from earpiece to headphones and then back to earpiece after I remove the headphones. The only solution? Reset/reboot the phone.

I have the same issue! The speaker of the new iPhone4S, out of the blue stopped working! No sound comes out of it unless you use a headphone.
I read a thousand posts and online forums and its not the problem of the audio jack.
I tried to reset and restore, and not success. I tried all the crazy ideas as turning off wifi and bluetooth and no success.
The phone never fell on the floor, I use it very little, and I take super care of the phone....
Sometimes I hear a strange noise like a interferrence noise comming out of the "not working speaker", but nothing other than that and its random when it occurs.
My last option is to send it for repair.... but WHAT IS GOING ON with the APPLE products ???
I'm starting to hate my iphone.... all my friends have Samsungs and I never heard of any issue like that with those phones!

Earpiece and speaker malfunction

I have a Lumia 920 and for the second time in 2 months the earpiece and speaker have suddenly stopped working. No sound or even alerts are being sounded.

dude, just got off chat with att. they are sending me a new phone. I guess there is a 2 year warranty with this device. fwiw, this is my second phone...the first died on impact with a concrete curb

Why is there no sound coming from my Ipod speaker?

Why is there no sound coming from my ipod speaker?

Do headphones work?
Do you have volume set to max?
You can try the standard fixes:
- Reset. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod.
If you still have the problem then it is likely have a hardware problem and an appointment at the Geniu Bar of an Apple store is in order.

Make the app sounds come from the front speaker?

Hello,
is there any way to make the sounds from the apps come from the front speaker? When I hold the phone sideways my hands block the lateral speakers, making it quite hard to hear, so if there was a way to change the speaker the apps use, that would be great!
I'm aware I can just change the way I hold the phone, but it's kinda uncomfortable otherwise...
Thanks in advance! =D

If by front speaker you mean the earpiece, it doesn't produce enough volume to be clearly audible unless you hold it to your ear.

[SOLVED] Playing sound simultaniously from wine and other applications

I'm using Pulseaudio with the following packages installed:
~> pacman -Q | grep 'alsa\|pulse'
alsa-lib 1.0.27.2-1
alsa-plugins 1.0.27-2
alsa-utils 1.0.27.2-1
lib32-alsa-lib 1.0.27.2-1
lib32-libpulse 5.0-1
libpulse 5.0-1
pulseaudio 5.0-1
pulseaudio-alsa 2-2
When running a wine application sound works, unless a linux application is playing sound. If that is the case, no sound is playing from the wine app until sound from the linux application stops (for example by pausing smplayer).
Is there any way to make sound work simultaneously from wine and native applications?
Other information that may be relevant:
Architecture - x86_64
Desktop - KDE
Wine application - BabasChess
Last edited by CarbonFixer (2014-04-16 16:14:10)

V1del wrote:Install lib32-alsa-plugins and set wine to use the default resp (System Standard) card in winecfg pulsemixers should show an [alsa-plugin] wine stream
Thanks
Was missing that package.

After updating to version 5 for iPhone 4, I am unable to hear incoming call from earpiece. Speaker phone ok.

Unable to hear incoming call in earpiece. Speaker phone ok.

ok thanks for someone "Wjolsten" pointing out that i might have put on the 'ringer silence' button on on the side of the phone. ......................... boy do i feel stupid. thanks all the same for the 'tech support' from Apple, Geniuses?? i dont think so.

BB Passport earpiece and speaker crackling

I purchased a Red Passport from ShopBlackberry only a month ago and the ear piece and speaker are both crackling at medium - high volume. I like the overall build but this isn't what I expected, to be sending in my phone only after a month. Anyways, I am having a hard time to find Repair website for Blackberry. I only had it for a month and since I bought it directly from Blackberry it should still be under warranty. Who do i go to? I looked everywhere in support but I can't find Repair request form. Any help is appreciated

Does anybody experience these issues?
Do i need to take this phone to service center or wait for a software update?

When I plug my headphones into my MacBook Pro, and I turn the volume up, I hear the little bubble sound coming from the computer speaker. What is wrong with my computer? I don't think it's the headphones, because i've already tried two pairs.

How can this be fixed?

Hi DS,
Thanks for the response. Unfortunatly those documents are of no help to me. I have tried several times to boot into the AHT, which didn't work. And attempting to do an internet recovery won't even allow me to log into my wireless network, even though I know the password is correct.Let us try to go through this step by step, as I've been doing.
1) After resetting the NVRAM it still does not see any new hard drive, and I don't need to select the old HD to boot from it. If it is in it works.
Therefore this means that it is
a) not the SATA cable
b) not the new hard drive because my friend got his replacement HD today and I checked them both out. They both work fine on my other friends new macbook pro.
2) The old hard drive can boot up regularly, and the new one can be seen via the SATA to usb connector and booted from, but not via the internal SATA connector.
Also, I still can't boot into Parted Magic, or any other rescue OS I have.
This seems like a very specific problem, and it definatly wasn't anything I did. I followed troubleshooting steps like I normally do and it wasn't a clusterfuck as you so elequently stated.
Please take the time to respond to all of my questions this time, I feel like you are overlooking some very important information.
Thanks,
RFJ3200

Skype ring sound comes from earpiece

Hi everyone,
On my Nexus 5, when the phone is locked, skype ringing sound comes through the earpiece instead of the loud speaker. Most of the times I am missing calls because of this. Any solution for this?
Skype Version: 5.0.0.52727

Hi, I had the same problem and now i fixed it.
I am using Sony M2 aqua with sony smartwatch that means my bluetooth is always on. You should change the mood of Bluetooth from your skype. When you are calling someone from skype (when it is ringing), Bluetooth icon will appear right beside of camera and mic icons. Then you should tap it and change the icon to out load mood icon. It will work out again and you can hear call from speaker on the bottom. I crosschecked with receive and dealing calls while Bluetooth was off, it was working too.

Please Help! HDMI sound playing from laptop and NOT the TV

Synopsis: Installed Windows 8.1 on new SSD on my Toshiba P75-A7200. I stalled all the drivers from Toshiba website. Everything works except now my HDMI audio does not play on TV play from laptop. I reinstalled the original v. of Intel HD Graphics 4600 and Conexant Smart Audio HD drivers. I also looked in the volume control panel and sound playback options looking for HDMI setting with no luck. Has anyone encountered this? OR have an idea how to get my audio working with HDMI cable to TV?
I checked different HDMI cables to be sure it wasn't a bad cable.

Satellite P75-A7200
If you're determined to set things right, you can always restore the hard disk to its original out-of-the-box contents using Toshiba recovery media and upgrade to Windows 8.1 this way
If you failed to create recovery media, obtain it from Toshiba. Scroll down to Get Recovery Media here
See the instructions in the section Restoring from recovery media, which begins on p. 60 of the User's Guide.
Satellite/Satellite Pro P70/P50/P40-A Series User’s Guide
-Jerry

Output sound level from gramophone and from computer should be the same

Dear friends,
Why the output sound level isn't equal if we listen the LP directly from the gramophone (AUX1) or from the computer during the recording the track on the computer?
We are using The E-MU 0404 USB 2.0 Audio/MIDI Interface:
http://ixbtlabs.com/articles2/proaudio/emu-0404-usb.html
http://www.emu.com/products/product.asp?product=10447&nav=features
and we have connected E-MU with the (gramohone) speakers through the headphone output on the E-MU and turn the headphone level to the maximum, but the sound level is still lower from the same speakers.
If we compare the track after the recording with the LP on the gramphone is the level of the sound the same/equal.
So we need to have all three sound levels equal:
-from the LP form the gramophone
-from the computer during the recording
-from our track on the hard disk after the recording
Thank you for your answer.

function(){return A.apply(null,[this].concat($A(arguments)))}
Connecting loudspeakers to the headphone output on the E-mu sounds like completely the wrong thing to do altogether - you should
only connect headphones to a headphone output, and nothing else at all.
We will buy the cable as you mentioned and connect it in the line level (S/PDIF).
function(){return A.apply(null,[this].concat($A(arguments)))}
Almost certainly you will need to adjust the monitoring levels in Patchmix to get this the way you want it
Then we will try to adjust the monitoring levels in Patch (I will report if and how did we manage it).
Our equiptment is:
·       turntable Stabi Kuzma audio komponents ( http://www.kuzma.si/AmplioCMS2/public/EnterPublic.cms2?langId=60&request_locale=en_US )
·        Rotel Phono equalizer RQ-970BX,
·        Rotel Stereo integrated amplifaier RA-9858X
·       speakers JMlab Focal Daline 3.1 (nom. impendance 8 Ω, max. power 75 W)

Different sound quality from back and front panels

I posted https://forum-en.msi.com/index.php?topic=112384.0
but no one answered
Well, I have another related problem and a question:
1. Why does sound differ if I plug my headphones into the back panel jack from that I get from my front panel jack?
2. Is this by design?
3. Can I change it (make sound from front like that from the rear)? How?
4. Is this influenced by Windows Sound settings (speakers > advanced > headphones or speakers)? Could you please give more info on these settings (I could not find that anywhere!)
The major problem is that my phones sound too twittery, almost no bass, whereas the speakers plugged into the rear jack are OK. Please help!
My Windows is not English, so some names may be incorrect, sorry
I have WinXP Pro, MSI P965 Neo-F, Realtek ALC883
I tried Technics RP-F500 and AKG K-44 headphones, they both sound alike
I mostly listen to mp3s

hmm.. I do not aware of this, is this very significant?
I think you should check with MSI. goto MSI support site and post your problem.
By the way, don't forget to read the moan guide, the link is in my signature.

ATV2 sound loss from HDMI, Optical or both!

Hi, Sometimes (and this is the rustrating bit), but not always the sound from my ATV2 will die. I have it connected to the TV via HDMI and also to a surround sound system via an optical cable.
I've played around with the audio setting in the ATV menu (16 bit, Auto, Dolby on/off/auto) etc and the same still happens. I have some movies I've watched a couple of times and the first time around they can play with DD 5:1 sound and the next time will be stereo only.
I've tried various different cables and all end up with the same results, is this and ATV problem? It just gets very annoying when you get to 15 minutes from the end of a film and the surround sound dies, then fingers crossed it *might* work through the TV sound to finish the movie off.
Thanks in advance.

No one??

Mac keeps turning off during OS installation: from dvd and usb both

I'm trying to install a new ssd, and mac keeps shutting down while installing 10.6 from retail official dvd.
so I made a bootable OS in my usb in disc utility (the whole "source" and "destination" tech), but mac still shuts down while installing OS from it.
what is likely to be wrong?
Corrupt boot files made from corrupt dvd?
macbook 2007, 10.6 snow leopard

Format the external drive as Mac OS Extended (Journaled) - Partition Map Scheme: GUID
If the drive is not formatted as GUID, it's not bootable.

C1-02 Sound heard from Earpiece and Speaker both e...

Similar Messages

Maybe you are looking for