(C1) Initialize POST Error Manager (PEM)
Hello,
My hardware diagnostic card gives the following error: (C1) Initialize POST Error Manager (PEM). My bios just starts well and gives no error messages.
I can go to the bios as usually and my computer works normally (at the moment), but QuickTech also gives some error messages:
- BIOS Buffer overrun check
- SMBus Host detection
Maybe that these errors also have to do with it?
When I try to search with Google I only get some manuals where these error codes are listed, but no more explanations and possible solutions.
Can somebody please tell me what this problem is all about and how to fix it?
I have a MSI 6533 bord.
Hi,
No, unfortunately not. I posted this question in a lot of different forums, but no one seems to know what's exactly wrong and how to fix it.
I keep searching, and when I find some answers / solutions, I'll post it here. Can you also please keep me informed if you know some more?
Similar Messages
-
Error while posting batch managed stock in 107 movement type?
Hi All,
Error while posting batch managed stock in 107 movement type in MIGO, like 'Goods movement not possible with mvmt type 107'
and here in batch tab batch number is not displaying only valuation type is displaying, kindly let me know can it be done by doing any change in field selection with respect to 107 movement type
regards,
SanjanaHi,
spro-inventory management-setting for enjoy transaction-setting for goods mvt--field selection per mvt type
107 SGTXT
107 WEMPF
Check here 107 mvt type there or not if not then put.
101 CUSTNAME
101 GRUND
101 SGTXT
101 WEMPF
102 SGTXT
102 WEMPF
103 SGTXT
103 WEMPF
104 SGTXT
104 WEMPF
105 SGTXT
105 WEMPF
106 SGTXT
106 WEMPF
107 SGTXT
107 WEMPF
108 SGTXT
108 WEMPF
109 SGTXT
109 WEMPF
110 SGTXT
110 WEMPF
Regards
Rakesh -
MSI X79-GD65(8D) gives a posting error 63 Late CPU Initialize
Hey Guys.
I have recently purchased new hardware.
MSI X79-GD65(8D) Motherboard
Intel i7 3820 CPU
4 X Corsair Vengeance 4GB DDR3-1600 RAM
MSI GTX660Ti Power edition GPU
Corsair 750W Professional series PSU
Corsair H80 CPU Cooler
I haven't overclocked ht e mobo, but on cold boot, the mobo doesn't initialize, gives a post error 63, refered to the mobo manual, it says it means late CPU initialize. Checked the BIOS, running version 1.7 and according to MSI download site for the CPU support list.
The memory is in quad channel as it shows in a diagram in the mobo manual. If I switch the pc off, and back on, it initializes and boots, the pc runs stable, it can run 48 hours no hassle, passes burn in tests to, just the first cold boot doesn't initialize.
Any ideas for what to look at would be great.
Thank you.A little hint for you: Don't try any of the .1B betas as they run horrible. I had to remove the latest .1B3 as it bricked the board and had to be recovered.
1.18 B7 is still the best bios to use:
Quote from: flobelix on 17-November-12, 00:49:07
I'd suggest the later Bios 1.18 B7 which I'm also using with the i7-3820 (https://forum-en.msi.com/index.php?topic=154186.msg1192427#msg1192427) -
How to catch Posting error in File to IDoc Scenario?
I have successfully completed File to IDoc Scenario. Now I am interested in catching posting error. i.e., if mapping goes well and when IDoc is being sent to Recipient system then if any posting error is encountered, then a mail should go to a recipient.
Can anybody suggest the solution.
Regards,
Suraj KumarHi Suraj,
this can be done by triggerring an alert to the recipient.chk out these links to trigger a alert
/people/sap.user72/blog/2005/01/14/alert-management--improving-monitoring-of-your-landscape
/people/sap.user72/blog/2005/01/14/alert-management--improving-monitoring-of-your-landscape
regards
jithesh -
Failed to initialize the Fetchlet Manager while starting agent
Hi all,
I am getting following error message while starting an agent. This agent installation gets failed at the point of starting agent. Normally this happens when the dns /hostfile entry have any problems and I made sure those things are OK.
This agent is on a Solaris server and all other similar servers are working fine. Have anyone came across this situation?
$ emctl start agent
Oracle Enterprise Manager 10g Release 3 Grid Control 10.2.0.3.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Starting agent ........ failed.
Failed to initialize the Fetchlet Manager.
Consult the log files in: /u01/oracle/product/agent10g/sysman/logcat emagent.trc
2009-12-04 12:25:54 Thread-1 ERROR util.files: ERROR: nmeufis_new: failed in lfi opn on file: /u01/oracle/product/agent10g/sysman/emd/agntstmp.txt. error = 2 (No such file or directory)
2009-12-04 12:25:54 Thread-1 ERROR pingManager: nmepm_pingReposURL: Did not rece ive a response header from repository
2009-12-04 12:25:54 Thread-1 WARN command: Job Subsystem Timeout set at 600 sec onds
2009-12-04 12:25:54 Thread-1 ERROR fetchlets: Error when initializing C Logging Package for ECID generation.
2009-12-04 12:25:54 Thread-1 ERROR main: nmefmgr_initialize failed to initialize Fetchlet Manager -
GR/IR Posting Error CKMLGRIR025 - Purchase Order History Inconsistent
Hi Everyone.
We currently have a posting in our GRIR for a Feright Condition Value against a Purchase Order which gets the above error when trying to post in MR11.
The Diagnosis of the error reads:
"The purchase order history contains differences between the goods receipt and invoice receipts/Account maintenance for the order item in the field Difference Quantitiy (= 43.804 TO) and Difference Value (= -342.77)
The purchase order history for this tiem is inconsistent"
When looking at this Freight Condition information in the Purchase Order I can not see why this item has resulted in this error in MR11.
Has anyone else seen this error come through in their system, and do you have any ideas on how to fix this.
Thanks
HayleyWe are experiencing the same issue with the GRIR Posting Error CKMLGRIR025 - puchase order history inconsistent. The actual message that we receive is Puchase Order history already inconsistent -->Quantity 1.00 EA Value 0.65-USD.
We reviewed SAP Note 708649 which also recommends using transaction MIRO with the corresponding default quantity and value o. However, we are not able to enter an Invoice for the "default qty & value 0", as SAP gives me error message M8278 "You are not allowed to have zero lines" (just like Haley commented). In reviewing this thread, I did not find the solution to the error message M8278 "You are not allowed to have zero lines" . Could someone help me understand?
Thank you! -
Can't initialize OCI error occured during the login process using TOAD 9.0
I have installed the Toad 9.0 recently while login using the username & password for oracle 10.0 database , i am getting the error
Can't initialize OCI Error 1
But i am able to login using the Sql Plus successfully..
Thanks in Advance.Here's one more reason why this error occurs in Toad. It is when you have more than one Oracle Client installed on your machine. Even when you select the correct Oracle Home in "Connect Using" field of Toad, you still get this error "Can't initialize OCI. Error -1". So, to solve that you need to go to the installation folder of that Oracle Home (e.g. C:\Oracle\ora92\), then go to the BIN folder. Open Oracle.Key in Notepad and confirm that it is showing Registry entry/path to the correct Oracle Home (e.g. HOME0 or HOME1 or whatever).
I hope this helps. -
Hi SAP gurus,
I am facing posting error fi_tax_chk_pricing_data
error code 13 builder tax2.
plz help mehi
u get this error when u have not specified the county while creating the company code go to OX02 and give country for the company code. this solves your problem
rgds
sree -
MR11 GR/IR Posting Error - PO History Inconsistent - error message M8278
Dear experts,
We have the problem as described in SAP note 708649. Error CKMLGRIR025 - Purchase Order History Inconsistent
This has also been described in this thread
Re: GR/IR Posting Error CKMLGRIR025 - Purchase Order History Inconsistent
We also have the issue on posting an invoice "default qty & value 0" in MIRO, receiving error M8278 "You are not allowed to have zero lines".
However, so far we are not able to correct this eg do not know how to continue to clear the GR/IR
Any help or hints on this matter would be appreciatedHi,
please note that the error message M8 278 is only issued if there is
zero amount in ALL document lines.
This means that you can post MM-documents with zero lines. But only if
there are other lines with amount > 0. The reason for this system
behaviour is, that every time a MM-Invoice is posted, an FI-Document is
created. In FI-Documents it isn't allowed to have zero lines.
So if you have an MM-Document with only zero lines, the Fi-document
can't be created and the error message is issued.
I hope I could help you further
Best regards
Erika -
Can't initialize oci. error 1
Dear all:
When I login TOAD, I got this error:
can't initialize oci. error 1
but sql*plus login can successfully from my client.
I've tried to set the NLS_LANG manually in the registry and set the enviroment ORCLE_HOME , but it cannot work.
my OS client is WINXP SP3 and the DB is : ORACLE 9.2.0.8 64bit
Regards
TerryDUPLICATE thread
Cannot login via TOAD with ORA-12705 error -
MC DAQ initialize.vi error
Hello,
I am trying to use MC DAQ Initialize.vi for reading some CCP and I have the bellow error
-301034
MC DAQ Initialize.vi
Error -301034 occurred at MC DAQ Initialize.vi
Possible reason(s):
ECU Measurement and Calibration Toolkit: (Hex 0xFFFB6816) The definition of the measurement could not be found in the A2L file. Most likely, the name of the measurement is misspelled or otherwise invalid, or the A2L database file has been corrupted. Solution: Make sure that the name of the measurement is spelled correctly and that the A2L database file is valid.
The a2l database is ok cause i'm using with other Vi's. Also the names of signals are copied exactly from a2l file so there is no typo error.
Does anybody encountered this issue or can somebady help with an idea?
Thanks,
VincentHello Vincent,
You should be able to open the A2L file with notepad. I would suggest opening it and searching for your measurement. If you can find it, then the name must not be a typo. There may be something inside the measurement that our parser is having trouble with. If you could copy the section for your measurement here, we may be able to see what is going on. (You can use dummy values for addresses, etc when you paste the part here.)
You can also try running the M_C Explorer example that ships with the toolkit (Help-Find Examples. Hardware Input and Output -> CAN -> NI-CAN -> ECU Measurement and Calibration -> Advanced). This example opens all the measurements and characteristics in the A2L file, so you can see which values you have access to and if they are configured properly.
I hope that helps. Have a great day.
O. Proulx
National Instruments
www.ni.com/support -
guys,
i get this posting error when i try to create a purchase order.... please some one help on this??
tnx
wiz
Posting only possible in periods 2009/09 and 2009/08 in company code 2000
Message no. M7053
Diagnosis
The posting date entered is not within one of the permitted posting periods (current period/previous period).
This can be due to one of two reasons:
The correct current period has not been set in the system.
For the system, the first of the entered periods is the current period. At the beginning of a new period, your systems administrator must change the current period in the material master record, using the function "Shift periods". This has not yet been done.
You have entered a wrong date in the field "Posting date".
Procedure
Check the posting date and correct it if necessary. If your input is correct, inform your systems administrator that the "period shifting" (period-end closing) process has not yet been completed. Copied from M8022Hi,
The problem was due to posting period is not open for posting yet.
I believe you are trying to create PO for Oct 2009. But your posting period was open for Sept 2009 and Aug 2009.
Go to tcode MMRV to check for company code 2000, current period 09 2009, previous period 08 2009.
Go to tcode MMPV, enter the company code 2000, period 10 and fiscal year 2009, select "Check and close period" and execute.
Go to tcode MMRV to check again for company code 2000, current period should be 10 2009, previous period 09 2009.
You should be able to create a PO by now. If you still fail to do so, please contact your FI to open FI period via tcode OB52.
Hope it helps.
Regards,
JT -
User defined error management in variance calculation
Dear Expert,
I would like to change the message type for some messages in variance calculation. Path: IMG/product cost controlling/cost object controlling/product by order/manufacturing order/periodic processing. According to IMG documentation, the message type can be changed here. But I failed to edit the message and it seems not modifiable. Can anyone reply on this? Thanks!
BEST REGARDS
Maggie
Edited by: Qin Ou on Oct 27, 2009 6:36 AMHi,
I am able to change the message is the IMG Path:
IMG/product cost controlling/cost object controlling/product by order/manufacturing order/ User defined Error Management /
1, Specify User-Def. Msg Types for Preliminary Costing of Manufacture
2, Assign Message to Responsible Area
Regards,
Sridhar Sha -
General Ledger Posting Error (GLT2 051) No accounting transaction variant
Hello SAP Gurus-
When testing lockbox in FLB2, I received the following error message:
General Ledger Posting Error (GLT2 051) No accounting transaction variant assigned to FB01/ /LB
We are on ECC 6.0
I created a new Document Type LB
I created a new G/L account for Lockbox clearing and AR
How do I fix this?
Thank you!Hi,
Assign a transaction variant for the document type you created in Transaction code GSP_VZ3. Also, make sure that the GL accounts affected are assigned with item categories in GSP_LZ2.
Thanks
Aravind -
Can any one tell me what the POST error of 2 beeps pause 1 beep is realted to? The system begins to boot flashes video, video shuts off, cmos info flashes shuts off and give post error.
Use just one stick of RAM in a green slot. Reset the Bios and be sure the machine is not pluged in when you do those things.
Remove all unneeded hardware so that you don't have stuff in the box when you try to boot that is not needed to post.
Find out which Bios you have when the screen first comes up.
You need to know which CPU core you have. If it is a Clwhammer, Newcastle or Winchester then you need Bios version 3.3 If it is a San Diego, Venice or X2 then you need Bios version 9.1.
Now that you have a system with the correct Bios you can then install your RAM in slots 2 and 4. You should then get a post into dual channel mode.
Set in Bios first - Optimized Defaults. Make sure that you do not skip this step.
Now setup the Bios to match the gear in the box. No overclockinmg as yet.
Now get Windows cleanly installed with any drivers you may need.
Now you are ready to install those other items you have in your hot little hands. One at a time.
Maybe you are looking for
-
Moving a BT Infinity phone line
I have a Home Hub 5 with a BT Infinity line and the line enters the house on the ground floor at the main socket, where the router is currently located. Having just had building work done I want to move the socket upstairs but am not sure if the Home
-
Upload data from multiple worksheets of excel file into SAP by using MIME?
Hi all, I'm trying to getting the data from a multiple worksheet excel file by usin the MIME Repository. First of all i realizied it like [here|http://abap-explorer.blogspot.com/2008/12/upload-data-from-multiple-worksheets-of.html] in a normal ABAP R
-
Photos are corrupted on iphone.
i recently replaced my iphone. restore seems to have gone smoothly except that my photo folders are corrupted. the camera roll and photo stream folders seem ok; all others behave as follows: i open the folder, select a thumbnail, and the photo tha
-
Trackpad USB Mouse not working in windows xp safe mode
I can't access my windows side, after fixing a series of problems with the windows recovery console. I can only access my windows login screen through safe mode. However, now my trackpad and USB(corded) mouse won't work, to login and finish fixing my
-
Docs for j_security_check?
Hi- I'm in the design phase of an EJB app on WLS. I'm planning on writing a realm based on the RDBMSRealm example to handle user auth and access. I've seen several mentions of j_security_check in this group but I can't find any docs on it. Can somebo