C100 and Ninja 2... Are my image settings (Wide DR) making it to the footage in Ninja?

I have the C100 set for Wide DR. Is the footage coming out of the HDMI and going into the Ninja carrying that setting, or is that setting applied to the footage after the HDMI?
thanks,
Gregg McNeill
Big baby Productions Ltd.
www.bigbabyltd.co.uk

Mbox 2 Pro (Digidesign Drivers, Pro Tools) are not fully compatible with Logic Pro 9 and Lion/Mountain Lion - performance (if you get them to work together) leaves a lot to be desired.  If you are running Pro Tools successfully, more often than not you will have MIDI driver conflicts.  What you can do is completely remove Pro Tools Drivers and start from scratch getting the absolute minimum drivers necessary to run your Mbox 2 Pro on your system, and then try to load the Mbox in Logic.  Just understand that natively it may not work well, lots of other interface choices if you are going to use Logic.  Lots of stuff on the net about this.  I had the very same issues, except my system, and all midi related softwares (Garageband and Logic Pro) became unresponsive when attempting to load either application. I would get a pretty consistent midi timeout errors, as well as both softwares hung for long periods of time before crashing. Check out the folder in finder Library\Audio\Midi Drivers to start - see what's in there - and just delete everything in the folder. Note you won't be able to load Pro Tools (if you use it) by removing the digi drivers. You can also uninstall the Mbox from the System Preferences menu. Give that a try - download new drivers for the Mbox 2 and see if Logic Pro works with it after some configuring. If that doesn't work, I'd switch to a new interface - I'm actually selling my Mbox 2 pro for something that actually works with Logic Pro Natively.  Hope it helps!

Similar Messages

  • I have forgotten my security question answers and can not access my account settings without them. What is the answer?

    I have forgotten my security question answers and can not access my account settings without them. What is the answer?

    Alternatives for Help Resetting Security Questions and/or Rescue Mail
         1. If you have a valid rescue email address, then use this procedure:
             Rescue email address and how to reset Apple ID security questions.
         2. Fill out and submit this form. Select the topic, Account Security. You must
             have a Rescue Email to use this option.
         3. This is the only option if you do not already have a valid Rescue Email.
             These are telephone numbers for contacting Apple Support in your country.
             Apple ID- Contacting Apple for help with Apple ID account security. Select
             the appropriate country and call. Ask to speak to the Account Security Team.
    Note: If you have already forgotten your security questions, then you cannot
             set up a rescue email address in order to reset them. You must set up
             the rescue email address beforehand.
    Your Apple ID: Manage My Apple ID.
                             Apple ID- All about Apple ID security questions.

  • I have one problem and I think it is a settings issue. When I google the web I get results. Now, when I visit some website and I return to my search results I don't have any markers (diffrent link colour for visited sites in IE).

    Question
    I have one problem and I think it is a settings issue. When I google the web I get results. Now, I visited some website and then I want to return to my search results and pick another search result. And there is a problem: I don't have any markers (diffrent link colour for visited sites in IE) that would help me to distinguish visited and not visited sites.

    Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
    I suggest that no response is made to this duplicate thread. 

  • How long does it typically take to update new apple products?  I'm speaking in terms of software/firmware updates.  My new Apple TV and iPad 3 are glitchy, which is extremely frustrating considering I have the last gen of each sitting there working great.

    How long does it typically take to update new apple products?  I'm speaking in terms of software/firmware updates.  My new Apple TV and iPad 3 are glitchy, which is extremely frustrating considering I have the last gen of each sitting there working flawlessly.

    I appreciate the responses, however my initial post was too vague. I apologize and will explain.  The specific issues are the window closes occasionally when loading something large, that has ceased in the last day or two. My battery life is no where near the second gens, is that the extra hardware at work? I thought that had been accounted for? One of the frustrating, albeit humorous occurrences is when I placed the second and third gen within 1 foot of each other, turned off LTE, and streamed a video.  From every location the second gen out ran the new model on 3G signal, lol.  Not a huge deal since I have wi-fi or LTE pretty much everywhere I am, but disappointing none the less. 
    The new apple tv is great, except for the same thing everyone is posting about. HD iTunes library streaming taking overly extended load times. I don't expect it will take too long  for apple to address that issue. I'm new to apple, last 6 months, but they seem to have excellent support!  It is definetly highly rated.

  • We updated our phones and now we are running out of memory.  Never happened before the update and we have not added anything new.  We have hardly anything on our phones.

    We updated our phones and now we are running out of memory.  Never happened before the update and we have not added anything new.  We have hardly anything on our phones.  Why am I having to remove stuff that has always been on my phone. 

    Thanks for the reply TJBUSMC1973. 
    I guess that means back to the shop.  Ridiculous to sell a phone that can't handle the new iOS more efficiently (or vice versa).  I can't imagine anyone going near a 5C now (I have a feeling mine had already been used and taken back once and sold as new at O2).
    Charlie

  • I can see other accounts on home share and play the songs, but not drag them to my account.  Home share is on "on" on both accounts and both computers are authorized.  What can I do to copy the song from account to account?

    I can see other accounts on home share and play the songs, but not drag them to my account.  Home share is on "on" on both accounts and both computers are authorized.  What can I do to copy the song from account to account?

    okasy if you want to move the music from the other comptuer into your comptuer you can > but if they were purchased with a different APPLE id then you need to authorize the comptuer to play them .
    http://support.apple.com/kb/HT4527
    click homesharing > shows how to move the song onto your comptuer

  • C100 and Ninja 2 jaggy lines

    I have a c100 and Atomos ninja 2. I shot this weekend and after reviewing the footage I have jaggies in my footage. Can anyone explain to me what is happening? I've checked the files and they read progressive... What is going on!?

    No, my Ti4400 is not the Champ ed. The actual model number on it is 8871 ver-1.00. You can read about my problem's in the "Have you seen this?....." thread on this forum (page 7 now I think)
     I haven't had a problem in the last couple days though. I removed some Reg tweaks (this is a DAW box) and ....dont luagh, turned up the heat in my house. I'm not sure if it was the Reg edit or Temp, but things are working ATM.
    Nice to know I'm not alone though,
    C

  • Cannot install Firefox. WHen I click on the link to install, it takes me to an "error loading page" notice. My network connection and internet access are normal with Internet Explorer, so this is not the issue. Some kind of conflict with my settings or pe

    Cannot install Firefox. When I click on the link on the Mozilla website, it goes to an "error loading page". My network connection and Internet Explorer are fuctioning normally.
    == computer was recently wiped clean and am now reinstalling all previous software and applications ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322; .NET CLR 2.0.50727)

    None of the stuff in " http://kb.mozillazine.org/Locked_or_damaged_places.sqlite " helps. I have tried and tried and I have even wipe the computer clean still didn't help. I got the same problem as he/she has got in the first posted. Can add some web pages but not all the web pages I want.. I should have never updated to 3.6.13... That's when it all started for me, from that version..... Now Version 3.6.14 is out, I was hoping the version 3.6.14 might would fix the problem wrong again....
    Funny thing is i can not even Bookmark Firefox.com!!!!!...lol
    So any ideas on how to fix it other than the link giving would help.
    Thanks.

  • How can I set the new version of firefox so that things I write in journals and other things are remembered in case I accidentally navigate away from the page?

    In Firefov version 3 there is a feature that will remember what I have typed in a journal or note entry before posting it. This is not like an autofill because the test disappears if I navigate too many pages away from it. The usefulness of it was that if I accidentally navigated away from the page before sending my message or posting my journal, I could just press the back button and what I had written previously would still be there. I had to return to version 3.6.19 because version 5 does not seem to have this feature enabled unless you preform a very specific routine. You have to re-enable the ability of firefox to save tabs when exiting. then you have to close down firefox while saving the tab with the page you wish to write a journal on pulled up. Then when you bring firefox back up, you can type on the saved page and if you accidentally navigate away from it, you can hit the back button and it is saved. However, this goes away when you refresh the page or try it on any other page. I would like to know if it would be possible for me to enable this feature on firefox 5, or if I will have to continue using version 3.

    Try using this extension. <br />
    https://addons.mozilla.org/en-US/firefox/addon/textarea-cache/

  • When I have a 2nd Firefox window open, my bookmark toolbar is empty, as well as there is an additonal bar above where the exit and minimize buttons are. There is also a black bar where the minimize and exit button are.

    [http://i.imgur.com/FirpS.jpg Picture of the problem]

    -> Tap ALT key or press F10 to show the Menu Bar
    -> go to Help Menu -> select "Restart with Add-ons Disabled"
    Firefox will close then it will open up with just basic Firefox. Now do this:
    -> go to View Menu -> Toolbars -> select '''Menu Bar''' and '''Navigation ToolBar''' -> unselect All Unwanted toolbars
    -> go to View Menu -> Sidebar -> select '''Bookmarks'''
    -> go to Tools Menu -> Options -> Content -> place Checkmarks on:
    1) Block Pop-up windows 2) Load images automatically 3) Enable JavaScript
    -> go to Tools Menu -> Options -> Privacy -> History section -> '''Firefox will: select "Use custom settings for history"''' -> REMOVE Checkmark from "'''Permanent Private Browsing mode'''" -> place CHECKMARKS on:
    1) Remember my Browsing History 2) Remember Download History 3) Remember Search History 4) Accept Cookies from sites -> select "Exceptions..." button -> Click "Remove All Sites" at the bottom of "Exception - Cookies" window
    4a) Accept Third-party Cookies -> under "Keep Until" select "They Expire"
    -> REMOVE CHECKMARK from CLEAR HISTORY WHEN FIREFOX CLOSES
    -> go to Tools Menu -> Options -> Security -> place Checkmarks on:
    1) Warn me when sites try to install add-ons 2) Block reported attack sites 3) Block reported web forgeries 4) Remember Passwords for sites
    -> Click OK on Options window
    -> click the Favicon (small drop down menu icon) on Firefox SearchBar (its position is on the Right side of the Address Bar) -> click "Manage Search Engines" -> select all Unwanted Search Engines and click Remove -> click OK
    -> go to Tools Menu -> Add-ons -> Extensions section -> REMOVE All Unwanted/Suspicious Extensions (Add-ons) -> Restart Firefox
    You can enable your Known & Trustworthy Add-ons later. Check and tell if its working.

  • I upgraded my iphone 4s to the iphone 6 , and when trying to restore my settings from icloud, I keep getting the same error message, "unable to connect to icloud". it's been this way for 5 days! How do i fix this?

    I upgraded my old iphone 4s to an iPhone 6+ last Sunday (12/28). I've been trying to restore my settings and whatnot thru the icloud restore, and have been unsuccessful. The Wi-Fi connection isn't the problem, I'm not sure what is. The error message I keep getting is: "couldn't connect to icloud", it's been 5 days!! How do I fix this?

    Hi I would Restore New iPhone back to Factory Settings After Restore use same Apple ID & you will get all your Apps &Data back. This will get rid of any bugs. Cheers Brian

  • When converting RoboHelp HTML 9 files to RoboHelp HTML5 11 files, is it transparent and seamless or are there adjustments that need to be made to the output?

    We are considering upgrading from RoboHelp HTML 9 to RoboHelp HTML5 11. With all of our output files accessible by our customers, we want to ensure our content is always available to address their questions. When doing an upgrade to RH 11 will opening and outputting the files be seamless or will the files need tweaks to get them ready for publication? How much time would it take to adjust one page, if it's needed?
    Any insight/experience you have with this topic to share is most appreciated.
    Thank you.

    There's information on my site about fixing any List issues.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • I have lost all volume and sound from my iPhone 4S, even tho its on loud and I have checked all my settings. How do I get the volume and sound back on?

    I have done all checks, rebooted my phone but I hVe lost all sound from it. When i play videos/ music... My key sounds have gone everything!
    I've checked my settings they are all set to loud... What else can I do?

    After wiping it, you need to re-activate it. If it is carrier locked, you will need to activate it on the network it is locked to.

  • Treat JPEG files next to raw files as seperate files still imports and displays them as seperate images

    Hi, I am taking RAW + JPEG files on a Nikon D810. The RAW files are saving to a CF (primary slot) and JPEGs to an Eye-Fi card (secondry slot). When I am importing into Lightroom 5 directly from the camera, even though I have 'Treat JPEG files next to raw files as seperate files' UNchecked in preferences, it still imports and displays them as seperate images. I am trying to import the JPEG as a sidecar file only to the RAW file as I have read about but this is not happening, any ideas why? Thanks

    Well in Lightroom they are apart from each other before the actual import, all the JPGs list first then all the NEF files next. The same actual photo as the NEF or as the JPEG both have the same file name apart from the .JPG or .NEF so that is not the problem. The NEFs go to the CF card and the JPGs go to the EyeFi SD card, I think you are onto the issue but I'm not sure what I need to do to fix it. I guess I need to change a setting on the D810 itself. There really doesn't seem to be any other settings apart from the RAW + JPEG vs only one or the other and allocating which card is primary for the RAWs and which card is secondry for the JPEGs. I really need the JPEGs to go to the EyeFi SD (secondary) for live iPad image viewing and not to the same primary card (CF) as the NEFs (RAWs) go. This does seem to be a typical setup so I would think it has been encountered before.
    Thanks for your help any other advise is appreciated.

  • Upgrade 10.4.11 to 10.5, admin and root login are toast

    I wasn't sure if I should post this under Installation and Setup or Account and Login, as it involves both.
    Short version: After upgrading my G5 tower from 10.4.11 to 10.5, all logging into admin or root accounts stops working, except for logging in automatically as admin on bootup.
    Long, overly wordy version:
    So, I have a MacBook Pro 15" 2.4GHz and a G5 2x2.0GHz tower, both running 10.4.11. I cloned my MBP drive, and did the upgrade to 10.5 in the normal fashion, and everything worked fine. After the install, I updated to 10.5.2 and the other recent stuff in Software Update, and everything is ok there.
    Next, my G5. I cloned my boot drive to an external for safety with CCC 3.0.1. I try the same update from 10.4.11 to 10.5 (PPC instead of Intel obviously, but it's the same install DVD) and it SEEMS to go ok. After the reboot I was up and running with 10.5, logged in as the admin user. I only have 1 user on the G5, the admin user, and it's set to automatically log in. So, it wasn't until I tried to update from 10.5 to 10.5.2 that I discovered that I could not give admin access to the process, or any process. It gives no error message, but acts the same as it would with an incorrect password. I tried logging out, and logging into the same user account again, and it fails. It also seems to think about for quite a while before it rejects the attempt by doing that little horizontal shake thing. Also, normally it would just list my admin user for me to click on, but instead I have the field to type it in myself, like it's totally lost track of the user(s). However, if I do a full reboot, it seems to log in fine via the automatic login function. Oh, and the exact same stuff happens if I try to log in as root, no go. Things like Repair Permissions and disk repairing (via booting to the 10.5 DVD and using disk utility OR booting to and using my TechToolPro 4.6.1 DVD) do nothing, and no problems are found.
    Of course, I tried booting from the 10.5 DVD and resetting the password, and it DOES list the proper admin user's name while doing that. However, it doesn't help, logging in or doing anything requiring admin rights is still impossible, except for logging in via automatic login.
    I reeeeeally don't want to do an archive install, as reinstalling all my apps would be an absolute nightmare. (This is an audio recording station, Logic Pro, Final Cut, Reason, PeakPro, etc.)
    Any ideas? I restored the drive back to 10.4.11 from my backup after wiping it and reformatting (new partition and everything, everything except zero the drive), and did the whole process over again with the exact same results. Restored again, and that's where I am now. I guess I'll have to stick with 10.4.11 for a while longer until I figure this out.
    - JonYo

    Hello Jon:
    It is difficult to determine (read I do not have a clue) what happened. However, an archive and install does not require reinstalling all of your software:
    http://docs.info.apple.com/article.html?artnum=107120
    A&I retains your programs, files, and settings. I used A&I to upgrade one of my iMacs to OS X 10.5 (I also used the upgrade feature on the other one). A&I also creates a rather large folder called +"previous system"+ that may be deleted after things are running well (it is a sort of safety net that contains all of the programs, data, etc from the prior installation).
    Barry
    Message was edited by: Barry Hemphill

Maybe you are looking for

  • Can't Get Acceptable Quaility Compression.  Help!

    Hello, I am burning a very simple DVD of a project and no matter how high I set the Bit Rate, motion detection, etc, I still get blocky areas in my darker scenes that look terrible. I have tested almost every setting in compressor, DVD studio pro and

  • Data Acqusition and recording in Binary Format

    Hi Can anyone tell me how to perform buffered Data acquisition and write it in Binary format. I want to record data when it is streaming that is i would like to record data on a real time basis. I have started acquiring data and also graphed it, But

  • Pre populated Adapters

    Hi everyone! Hope you are having a great time. We would like to know what is the API or class or package that we can use in order to get the information from a user that is being created in OIM 11g. Based on the following scenario: We have a new user

  • Table Control in eCATT

    Is it possible to handle table control in eCATT?

  • QT player export function for iPod doesn't work!

    hello i just bought QuickTime Pro. unfortunately, the export function for iPod (.m4v) doesn't work... it stops after a short while and dont't go any further. thanx for your help! greetings, iMats iMac 800MHz PowerPC G4   Mac OS X (10.4.3)