C100 / Export statistics wrong time-period / Howto change?

If we have a look at the "Monitor, Internal Users" we can change the time range from "day" to "week" to "month".
If we want to export the same displayed time range as CSV for Excel, we don't get the same period... :oops:
Choosing the "day" for displaying in the browser (24 Aug 2008 16:00 to 25 Aug 2008 16:45 (GMT +0200) Data in time range: 100.0 % complete), we get the URL:
https://IP/monitor/reports/internal_users?date_range=current_day&report_def_id=mga_internal_users&search_option=equal&report_query_id=mga_internal_users_top_incoming_messages&format=csv
and the CSV-data looks like this:
Begin Timestamp,End Timestamp,Begin Date,End Date,Internal User,Clean Messages
1219586400.0,1219589999.0,2008-08-24 14:00 GMT,2008-08-24 14:59 GMT,[email protected],1You can see, this is just an HOUR and not a DAY.
The same for the time-range "month":
https://IP/monitor/reports/internal_users?date_range=current_month&report_def_id=mga_internal_users&search_option=equal&report_query_id=mga_internal_users_top_incoming_messages&format=csvBegin Timestamp,End Timestamp,Begin Date,End Date,Internal User,Clean Messages
1217023200.0,1217109599.0,2008-07-25 22:00 GMT,2008-07-26 21:59 GMT,[email protected],5This is just a DAY not a month...
How can I export the same time-range to Excel as shown in the Browser with the same values for incoming/outgoing number of mails?

Hi Pat,
I dot not see an official statement that this particular issue was singled out for inclusion in a new release. That being said, any reporting issues resolved in this (or intermediate point versions not publically released ) could most definitely overlap the issue and allow the export to work properly.
-whardison

Similar Messages

Why is does my apple run SLOW.you go to open a program and the circle thing just spins for a delayed period of time. You change from typing in a word doc and go to say email or internet and it takes several minutes to allow you open anything up. Like it

Why is does my apple run SLOW.you go to open a program and the circle thing just spins for a delayed period of time. You change from typing in a word doc and go to say email or internet and it takes several minutes to allow you open anything up. Like it is frozen. I have tried rebooting the computer and it works for a few minutes then gets stuck.

Which model iMac do you have?
How large is your HD and how much space do you have left?
Check out the following & do the necessary:
User Tip: Why is my computer slow?
What to do when your computer is too slow
Speeding up your Mac
OS X (10.6.6)
Use Software Update or the OS 10.6.8 combo update to update your OS. Also, update everything SU has to offer for your computer. When done, repair permissions and restart your computer.

My phone (and iPad) keeps asking me to put in my password and when I do it says its wrong. I've changed it a few times but it still won't work.

Every time I try to download an app or update one or back up my phone or iPad it wants me to log in but when I type my password in it always says its wrong. I've changed it but it still says my password is wrong. Help!

I have same issue, i put password for original account, but still it doesnt let me in.
Please advice asap
Thank you in advance

My iphone 3gs has started showing the wrong time and date. All was fine until this afternoon when it changed. My apps have the right time and date. However the world clock is wrong. I have to turn off the automatic time setting to get the right time.

My iphone is showing the wrong time and date. All was well until sometime this afternoon when it changed... to Nov 5 (2 days prior to today), and about 9 hours and some minutes before the actual time. The world clock for my time zone shows the same wrong date and time. My calender shows the same wrong date and time. The phone can not find my time zone any more. The only fix I found was to turn off the automatic setting for time. What is happening? Ideas?

just sorted mine went to
settings-mail,contacts,calender-timezone support
then turned it off then on tapped time zone and typed london
this did sort mine

Mashe I cant sign in blackberry ID from my phone helpim trying to but it in option blackberry. ID. Its telling me wrong password. I changed password. 10 times and its still telling wrong password. I tryd to put my friend account it working please help

Mashe I cant sign in blackberry ID from my phone helpim trying to but it in option blackberry. ID. Its telling me wrong password. I changed password. 10 times and its still telling wrong password. I tryd to put my friend account it working please help

Check your password agian. If your friends password /account is working then it is your account information. Maybe you have the wrong username/email combo
Developer for easyDial for BlackBerry Bold & inLink for BlackBerry PlayBook
Find me online via twitter, or on the techfruits.com webpage. Please hit the like button below if what I said helped!

What is the time period covered by "show statistics application"

Hi,
I'm checking the "show stat app" & "show stat app savings" from the cli of one of our remote site WAEs. In order to really make sense of what I'm seeing, what time period will these commands cover?
Thanks
Claire

This is a cumulative counter. So, answer to your question is ‘since the last reboot or clearing of counters – whichever happened recently’.

Lightroom 2.7 exporting the wrong images

Hi. I've been using Lightroom since the first beta, currently running LR2.7 on a MacBook Pro. I installed the new CS5 (Web Premium suite) a little more than a week ago, and I'm suddenly having problems exporting images to JPEG from Lightroom.
Images import and edit correctly, look great, nothing gives me an error message. But when I try to export a single image, the first instance (after I've launched the application) will export correctly. After that, there seems to be about a 70% chance that subsequent attempts will export the wrong image. The file is correctly named, but the image will be a duplicate of the last successful export.
If I try to export a batch of four or five, the first image will usually export correctly, sometimes the last image will export correctly, but anything in between will be a duplicate of either a previous export, or the first image.
I assumed it was a memory issue, shut down the Mac and restarted, then opened Lightroom as the only active application. Same thing happened. I can export correctly in other applications such as Photoshop and Flash, but Lightroom won't. Activity Monitor doesn't show anything out of line for memory usage.
When the problem started happening I was running 2.6; I upgraded to 2.7 to see if that would fix it--it doesn't.
Any ideas? I'd rather not delete and reinstall Lightroom and rebuild my libraries if I can avoid it, especially if that might not solve the problem.
Help!
Thanks--
--cynthia

Hmmmm. I've tried various naming conventions and I'm still looking for consistency in the way the error occurs--could have something to do with naming presets, but it's acting like something gets stuck in the cache. What puzzles me is that I export files daily, haven't changed cameras, cards, file locations, my workflow is the same, and I've never had this problem. The only thing that's changed (that I'm aware of) is the installation of CS5--the error seems to have started when I started using "Edit in Photoshop." (And again, that was never a problem before)
The files all have different names, the ones assigned by the cameras.
This morning I rebooted, didn't launch any of the CS5 apps. Launched Lightroom, chose 7 files at random and exported them with the "filename" preset. They exported correctly. I selected them again, and tried another export, this time giving them a custom name, and they exported correctly with a sequence number attached. Tried them with "Custom Name-Sequence," and they worked again. I exported a single file with the same preset, again it exported correctly.
Then I switched folders, selected 7 different images and exported them with a new "Custom Name-sequence," and this time Lightroom exported EIGHT files. The sixth was the previously-exported single-file, so the exporter had gotten the first 5 right, inserted the old file in the sixth position, and then correctly exported the last two.
Three more tests exported everything correctly, which is far fewer errors than yesterday. I'm kinda stumped.

NTP sets SMB clients to wrong time

Hi
The Server (Mac OS 10.6 server) is set as a time server for the domain but from yesterday reset most of the Windows clients that logged on via SMB to about 3/4s hr fast with the result that IP address's were dropped (Lease expired) and software relying on a network connection failed, time stamps of saved files were wrong and emails had the wrong time. In one case the month was changed to October so the guy went on holiday! Seriously, this is a big problem.
I've tried resetting the time locale, NTP time server and got rid of "LocalTime" which was a folder instead of a simlink but clients are still reporting time anomalies.
Thanks

ntp isn't particularly related to smb/cifs/samba, nor to dhcp, and ntp doesn't implement local time; ntp uses utc/gmt as the time base, and the local boxes adjust their time and timezones based on the client-local timezone definitions.
It could be that ntp is misconfigured, that something has gone seriously wacky with the ntp time base (hardware error? software error? network error? time-based attack? etc), or there's a rogue ntp server running.
Have a look at the ntp chatter in the system.log console log on the ntp server as a starting point, and at whatever passes for logging on the ntp clients, and at the settings for ntp. Out-of-the-box, there can be the requirement to tweak the ntp client or daemon configuration via the /etc/ntp.conf file, for instance.

Query for Old Data that does not match New Data within a given time period

Hello all,
One of the reports I need to create is for all associates who went from one department to another within a given time period. The way I ran this report in Reportsmith (pulling from our old system) was to compare the dept field from the beginning date to the dept field at the end date and it would give me those associate's that had moved. I had to do it this way b/c dept changes can happen using several different types of actions (supv change, promotion, etc.), none of them exclusive to just dept changes. We are now using Oracle HRMS and I need to create this same report with this system using SQL.
Does anyone know how to compare data between two different dates and pull the ones that don't match? Your help will be GREATLY appreciated!
Warm Regards,
Yasmin E. Alberto
HRIS Analyst
[email protected]

Hi, Yasmin,
In the sample data you posted, nobody changed departments between May 1 and May 11. In fact, there were no assignments of any kind between January 16 and May 17, so I wouldn't expect any output for that period.
A person (or rather, a duck) did change deptartments on May 20, so if you change the upper limit of the date range to
AND ASG_LAST_UPDATE_DATE < TO_DATE ('05/21/09', 'MM/DD/RR')you should see her.
You've probably noticed that this site likes to compress white-space.
To post formatted text (such as table results or indented code) type these 6 characters:
(small letters only, inside curly brackets) before and after sections of formatted text, to preserve spacing.

How to find out the rows inserted between a time period.

Hi,
Please help me to solve this.
Table - emp.
Colmns - empno(Primary Key),ename, mgr
How to find out the rows inserted between a time period.
For eg:- Between 02-Oct-2006 1 PM and 03-Oct-2006 2 PM.
regards,
Mathew.

Hi,
Maybe work:
For each row, ORA_ROWSCN returns the conservative upper bound system change number (SCN) of the most recent change to the row. This pseudocolumn is useful for determining approximately when a row was last updated. It is not absolutely precise, because Oracle tracks SCNs by transaction committed for the block in which the row resides
e.g.:
SGMS@ORACLE10> create table test(cod number);
Table created.
SGMS@ORACLE10> insert into test values (1);
1 row created.
SGMS@ORACLE10> insert into test values (2);
1 row created.
SGMS@ORACLE10> commit;
Commit complete.
SGMS@ORACLE10> insert into test values (3);
1 row created.
SGMS@ORACLE10> commit;
Commit complete.
SGMS@ORACLE10> select SCN_TO_TIMESTAMP(ora_rowscn),ora_rowscn,cod from test;
SCN_TO_TIMESTAMP(ORA_ROWSCN)       ORA_ROWSCN        COD
06/11/06 08:56:56,000000000         727707205          1
06/11/06 08:56:56,000000000         727707205          2
06/11/06 08:57:05,000000000         727707210          3Cheers

CS4 exports are 5 times slower then in CS2

System:
Windows 7 (64)
AJA Bord
8 Core System
In CS2 it was possible to make UNCOMPRESSED exports apart from the Adobe Media Encoder. In CS4 all exports seem to run thru the Media Encoder. Most of the exports work faster but I did not find a propper way to export UNCOMPRESSED files.
On the "old" system (4 Core - Windows XP) CS2 exports
AJA Avi v210 1920x1080
...in nearly real time. The same file with the new setup takes about 5x realtime. The weird thing though h264 also needs about the same amount of time then the uncompressed files. And the problem is not the RAID connected (copying is faster the real time)
Any Ideas?

Sadly this seems to have no affect on the exporting time. I changed the set
ting USE MAXIMUM RENDER QUALITY (ON+OFF).
Since my input and output is the same (AJA avi v210) the system should not render anything, right?
Uncompressed 8 Bit 4:2:2 Quicktime files are axported in real time. It seems like the problem is the AJA Codec on this Machine.
Again, this is Windows 7 / CS4 and AJA LHE. Maybe I'll have to contact AJA?

Not permitting time period to be overlapped....

Hi ,
I have the following table..in Oracle10g Standard Edition:
SQL> desc ref_dikaioum_meres_ektos_edras;
Name                          Type      Nullable Default Comments
SEQ_CODE_DIKAIOUM_EKTOS_EDRAS NUMBER(5)
SEQ_CODE_ERGAZOMENOY_TYPE_ID NUMBER(5) Y
DATES_APO                     DATE      Y
DATES_EOS                     DATE      Y
DAYS                          NUMBER(3) Y How is it possible to define a businness rule(a constraint) that for a specific "SEQ_CODE_ERGAZOMENOY" not to permit new records to be inserted if the time_period(dates_apo...means date_from) and (dates_eos... means dates_to) is overlapped to another time period....
For example:
If there is a record .... seq_code_ergazomenoy_type_id=12 , dates_apo= '01/01/2007' , dates_eos='31/12/2007' ...
and the user tries to insert a record like this.....
.... seq_code_ergazomenoy_type_id=12 , dates_apo= '01/05/2007' , dates_eos='31/10/2007' ...
or
.... seq_code_ergazomenoy_type_id=12 , dates_apo= '01/05/2007' , dates_eos='31/01/2008' ...
or
.....seq_code_ergazomenoy_type_id=12 , dates_apo= '01/07/2006' , dates_eos='31/01/2007' ...
or
.....seq_code_ergazomenoy_type_id=12 , dates_apo= '01/01/2006' , dates_eos='31/01/2008' ...
the system won't permit to insert it.....
thanks a lot
Simon

Have you considered using 3360's suggestion of a materialized view with a check constraint?
Like I said, it's really difficult to do this correctly, especially with triggers. In particular:
1. Your package (or temporary table, or whatever) needs to able to store an arbitrary number of "records", not just one. If it only stores one, it won't correctly handle statements like INSERT INTO...SELECT...FROM where the SELECT returns more than one row. Tom's example uses an "index by" table of ROWIDs for this purpose.
2. You need some sort of locking mechanism because you can't "see" changes that other, concurrent transactions have made but haven't committed yet. If you can't see them, you can't be certain that they their changes don't conflict with yours. The lock needs to prevent more than one transaction from inserting or updating rows for a given "domain" ("seq_code_ergazomenoy_type_id" I think in your case) at the same time. Tom's example uses DBMS_LOCK for this purpose, but...
3. To handle serializable transactions, the lock needs to "persist" after you commit, at least until all other transactions that started before you committed have committed or rolled back themselves. DBMS_LOCK doesn't do this, but SELECT...FOR UPDATE can.
In any case, if, for the moment, we ignore these important but difficult-to-address issues, and we ignore the "seq_code_dikaioum_ektos_edras" column (since I am not clear on how you want to use it), the logic for the query that finds the overlap (like in your after statement trigger) should be something like this (for a single record):
declare
    n integer;
begin
    select
        count(*)
    into
        n
    from
        dual
    where
        exists
            select
                null
            from
                ref_dikaioum_meres_ektos_edras
            where
                seq_code_ergazomenoy_type_id = pkg_ref_dikaioum_meres_chk.v_code_ergazomenou
                and
                dates_apo < pkg_ref_dikaioum_meres_chk.v_dates_eos
                and
                dates_eos > pkg_ref_dikaioum_meres_chk.v_dates_apo
    if (n > 0) then
        raise_application_error(-20020,'error_message');
    end if;
end;Tom's example loops through the rows identified in the "index by" table to perform this check for each "new" row.
The "materialized view" approach basically does the same thing using a similar query. It "counts" the number of overlapping rows. When a transaction commits, the materialized view refreshes. A check constraint on the "count" column in the underlying table (that stores the "materialized" results of the view) prevents the "count" from being anything other than zero. If it is, the refresh fails.
I wonder if your code is giving "false positives" because of the way you're using "seq_code_dikaioum_ektos_edras". Your SELECT statement could be returning the row that was just inserted because it has the greatest "seq_code_dikaioum_ektos_edras" and the row "overlaps with itself".
Hope this helps.

XFCE's Clock shows the wrong time...

XFCE's clock shows the wrong time constantly (it always shows the GMT time), but whenever I run hwclock -r, it tells me the correct time. Can anyone help fix it?

Well, I think I found what was wrong at last. It seems that the timezone wasn't set in the rc.conf, even though the TZ variable was set. I changed it, but will have to restart in a bit to see if it works.

Foreign currency conversion not picking up rate or time period

I am running the standard FX conversion (standard stored procedure - fxtrans.lgx) on SAP BPC MS version 7.5 , but everytime I run the package, even though I choose a particular day, it seems to run for multiple time periods.
In the formula log I get more than 50 of the following:
10000400 - 4 rows calculated
10000400 - 0 rows updated
10000400 is the TIMEID for my currency conversion.
Also, when I look at the result, even though I have entered 1 as my conversion fator I get a multiple of 18. I tried to change the conversion factor, but no matter what I do for no matter what entity and no matter what LC I always end up with a multiple of 18.
Any ideas for me?
Thanks

Hi,
This sounds strange. Can you post your script logic file and a small extract from your time dimension please?
Tom.

Cost of activity regarding a specific time period (start/finish)

Hi
I need to export into an excel a field in which there's the cost (of each task) for 2015 and for 2016 years.
For example. I insert a row "TaskA" : start at jan-2015 and finish at oct-2016. I need to know how much cost in 2015 and how much in 2016.
Inside MS Project I can see (and paste into excel) that information in timeline table. But what about have this information in custom cost fields?
thank you.
regards
daniele
Daniele.b75

Hi, John,
thank for quick response.
1) Sorry but I don understand what you mean for
"Populating those two fields will depend on how you calculate the cost for the custom
field."
Do you mean that I need to insert manually the cost for 2015 and 2016?
In that way I'll have two fields (2015 and 2016) absolutely un-linked...each time that I change a task
I have to insert MANUALLY the values inside 2015 and 2016 fields?
2) Also using formulas is not possibile have a time-section of costs?
regards
db
Daniele.b75

C100 / Export statistics wrong time-period / Howto change?

Similar Messages

Maybe you are looking for