C100 has too much green in the video, doesnt disappear when adding magenta
So last night I was just doing some testing with the c100 and I noticed that in the viewfinder after auto white balancing, there ws a bit too much green in spots where there relly shouldnt be. I took some video and wanted to see if this was just something in the LCD screen or the actual video, and the green cast was indeed in the video. I went into the color profiles and tried adding magenta but it actually did nothing to reduce the green in the areas I was seeing it in and only made everything else more magenta.
I'm just wondering if this is a known issue or if anyone has experienced this and if there;s any real fixes.
Hi JerTob,
We are sorry to hear that you are still having issues with the color casts. I suspect that this has a lot to do with the color temperature of the lighting that you are shooting in. What you have shown us is indoors, it's hard to make a distinct determination on the lighting because you could have any number of temperature bulbs in the mix. This type of mixture of lighting can have distinct effects on the color casts you see in the final image. This is especially true if shooting with household bulbs in an overhead or something to that effect.
What I would suggest would be to shoot outdoors, with the camera calibrated for such, and see if the same effect occurs. Lighting indoors can be very tricky and most videographers shooting in a professional environment use specialized lighting to correct for such casts and work with a colorist in post production to correct for exacting color.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Similar Messages
-
When I print a Word for Mac document to a shared printer (that is connected to my iMac) from my Macbook Pro, print preview looks fine but the printed page has too much blank space at the top and doesn't print the bottom few lines. I have tried to adjust the margins and the page setup settings but to no avail. It used to print fine until recently. Is there a way to fix it so that the printer prints what print preview shows?
I should add that when I e-mail this document to myself and print it directky from the iMac, it prints fine.
-
I have updated my iphone 4 to ios7 few days back, After that it becomes too much slow.all the applications take some time to open,
its touch response also became slow. .
One of my friends has also updated his iphone 4 to ios7,it is also facing the same problem.But the friend having iphone 4s is not facing any
problem with this new version.What i think iphone 4 has not too much good processor like iphone 4s & 5 to get it updated to ios7.
It destroys all the entertainment of using iphone.
How to update it again to ios6.
iphone 4 users please dont update iphone 4 to ios7.pleaseSorry, but Apple does not provide a downgrade path for iOS.
Because downgrading is unsupported by Apple we cannot discuss it on these forums, but you can use Google to find information on how to install an older version of iOS on any device.
Note that you will void the warranty and loose official support by Apple.
Feel free to let Apple know at http://www.apple.com/feedback
Anyway, give a try resetting all your settings:
Settings > General > Reset > Reset All Settings -
Why is there an extra three inches of space below the lowest object on my pages in preview (and published)? The depth is set to default standard and there are no items or boxes stretching it out. This has happened more than once.
Thank you for your response. This has happened on two sites I developed and I can't find a workaround.
http://aminiconsultingtest.businesscatalyst.com/index.html
Judy Gosse
Gaurav Sharma <[email protected]> wrote:
Gaurav Sharma http://forums.adobe.com/people/Gaurav.S created the discussion
"Re: Too Much Space on the Page"
To view the discussion, visit: http://forums.adobe.com/message/6022569#6022569 -
Photshop Elements 9 Interface has too much contrast
Hi. I like the new version 9. But I don't like the interface. Why did they change it. It was great in Photoshop Elements 7. And they even had a option to adjust the appearance option. Not now though. To me it has too much contrast. Why did they have to leave out that option. The new interface is too bright and too dark. Oh well. I guess I will have to get use to it. I wish CS4 had a interface like Photoshop 7. Here's a screenshot of Photoshop 7.
Hi. I will get the new version. But I just wish it could have the option to change the interface like Elements 7. The best looking version in my opinion. They should have made CS5 look like Elements 7 too. Black interface is the new thing. Not dull dingy gray like CS5 is. It looks like the Windows XP classic themes. Boring. I like subtle black like beautiful Elements 7.
-
My messages app won't open, after I sent a large iMessage. I think it just has too much data on it. What can I do other then reset my iPhone?
Hi everyone, I had this problem but none of the solutions above worked. What happened with me, and with others in other forums, is that a particular thread or message was causing the problem. I'd go to open the message and all I'd get was a white screen with the blue bar at the top. So, I went into contacts, pressed 'send message' to a contact whose message wasn't causing the problem, then I pressed back to messages. You then swipe to the left on the thread that's causing the problem, and delete it. Sadly this means you will lose all that person's messages, but you can try opening it from there and deleting it on the thread. Didn't work for me though. Hope that helps! It was the only thing that worked for me after about three days of total frustration and resetting!
-
Too much 0 in the report - depends on the pc
Hi @ all,
I have some problems with my laptop by executing queries. It puts too much 0 in the numbers. Instead of 10,00 the Bex displays 10.000,00. I checked all the settings, but everything is o.k.. Maybe it depends on the Bex version? I use Microsoft Office Excel 2003 and Bex BW 3.5. My BW is a 3.1 Content 3.2. Maybe I need another Bex? On my other PC all the queries are o.k..
Hope somebody could help me.
Regards Denise
Message was edited by: Denise FischerHi Denise,
goto http://service.sap.com/swdc
-> Download
-> Support Packages and Patches
-> Entry by Application Group
-> SAP Frontend Components
-> SAP GUI FOR WINDOWS
-> SAP GUI FOR WINDOWS 6.20 (or 6.40)
-> Win32
GUI 6.20 is fully compatible with BW 3.5 if with a BW SP ge 13.
I do use
setup620_20-10001502.exe
gui620_54-10001502.exe
BW30B_15-10001502.exe (or bw350_4-10001502.exe)
sem35_6-10001502.exe
SEM31B_6-10001502.EXE
on a GUI 6.20 and work on BW 2.1C, 3.0B, 3.1C and 3.5 with no problems.
Hope it helps -
USB port drawing too much power. The device that is plugged into it will be
I get this strange message every so often, sometimes more often than other times. It says:
USB port drawing too much power. The device that is plugged into it will be deactivated.
There are only two things plugged into the USB-The keyboard and mouse. When I get this message, the mouse freezes. If I jiggle the mouse cable where it is plugged into the USB, it comes back and everything is fine until this message comes up again.
Ever seen this before? What did you do?
Thanks for your help.Ahh I guess I could have figured that out by reading your hardware tag huh...
So it's giving you the message when booting up from a cold system with NO devices attached? (Not even the keyboard and mouse?).
How long before you get this message?
After you get this message, if you plug the mouse in to either USB port (As each port is a seperate bus), to clear the alert, and go into About this Mac, and More info, if you expand the USB info for each bus. Is there anything there that appears to be out the ordinary? (IE Only showing one bus, Showing a device plugged into a bus that isn't plugged in?) -
Im about to buy a macbook pro. but I dont know if there are too much techproblems with the retina model,such as overheating, malfunction of the fans, screen problems?. or is the macbook pro non retina in tech problems a better option? thanxa lot
I have a brand new rMBP and have not seen any of those problems.
-
Database is using too much size of the disk
Hi all,
I am using Oracle AS 10g and ITs database is using too much size of the disk. Because there is no space on the disk. Can anyone help me out to resolve this problem.
SaqibBe sure you have enought disk space before installing (see install guide). Add disk space if you need more.
-
I want to download pictures to my iPad 4 from a memory stick pro duo. There are no cord connections for the camera and the USB dongle requires too much power through the camera connection kit. Any good solutions?
Another way. You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive (works the same with an SD card) into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
Cheers, Tom -
Seems the pages I visit on the net are pushed more to the right, leaving too much space on the left side. Therefore, I cannot acccess the scroll down or across bars.
Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
There is too much space in the header
When I try to print a document or form the page comes out with too much space at the header and cuts off the bottom of the form or document. I've tried an auto alignment and that hasn't fixed the problem. Is there anything else I can adjust or try?
Thank you!Hi crashingwaves,
Generally, to adjust the amount of header in your prints, you will need to adjust the settings with the printing application. When printing on plain paper, a very narrow header is often required. Unless you are attempting to print to the leading edge of the paper, the header size should be within the printer's range.
What type of paper are you printing on? What is the size of the header that you need? Also, what application are you printing from?
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
I allocated too much space on the Windows side when using bootcamp and want to take some space back for the Mac side is there any easy way to do this?
Purchase and use Paragon Camp Tune
-
Can I fix if I have had too much presure on the screen to ipod touch??,
Hello! I have problem with my screen. That I have had to much presure on the screen and now when i just touch my screen it gets like the light dont work when I hold my finger there! (that little part) Can somone help me???????
- I would make an appointment at the Genius Bar of an Apple store.
-If you want to try yourself see:
iPod Touch Repair – iFixit
Maybe you are looking for
-
when i play back an mp3 dj mix i,ve burn,t to cd in my car when i turn the engine of and then restart the car the cd starts back from the beginning how do i solve this problem so that when i turn the engine on end off the cd plays from the same place
-
Application signatures not beeing validated?
Hi, i've accidently deleted some files from the installation directory of one of my AiR applications, and i haven't noticed it until the application wanted to use the files and couldn't find them. Now i'm wondering why the application was able to run
-
During the course of (the excellent) LCA I spoke to a number of people about setting up an official mirror here in New Zealand (the one we currently have is somewhat 'under the radar'). I am now getting questions about how much bandwidth, disk space
-
Hi Experts, I am getting error SYSTEM_IMODE_TOO_LARGE. The program takes the change pointers and creates an IDOC. Only way now is to process change pointers mannually to reduce the number of change pointers for this program. Can you suggest any way
-
Exposing SAP systems directly through Portal
Hello All, If we expose the SAP systems directly through the Portal by creating transaction iviews, Are there any security lapses. I could see a great advantage of users having the internet enabled usage of SAP systems of their organisation. Is this