C1250 AP loading in boot loader mode

I am trying to configure a c1250 Access Point but there is no config t command. It appears that the AP is loading in boot loader mode. Can anybody tell me how I can get a IOS on here so that I can configure the AP?
From Sho Ver on AP:
ROM: Bootstrap program is C1250 boot loader
BOOTLDR: C1250 Boot Loader (C1250-BOOT-M) Version 12.4(18a)JA1, RELEASE SOFTWARE (fc1)

If the AP is in "rommon" then you should NOT be able to get any output to the command "sh version".
I am suspecting the AP has booted into a controller-based IOS. Console into the AP and post the complete output of the boot-up process.

Similar Messages

Game center stuck on loading mode

Game Center is stuck on loading mode. Bought Jenga app and now can't play app because Game Center won't load.

Recently i've found the solution to this problem. Go to Settings, General, Reset and choose Reset network settings. And bingo!

AJAX truclient for IE, script cannot run in load mode

I have LR 11.5 Ajax truclient for IE script which runs fine in script mode. In load mode the script starts but remains showing the status 'running'. In the task manager, it shows that the TruClient for IE Browser task is not responding.
I have already added in the HIPS file to make exclusions for :
C:\HP Loadrunner\bin\LrWebIELauncher.exe
C:\HP Loadrunner\bin\Vugen.exe
C:\HP Loadrunner\bin\wlrun.exe
C:\HP Loadrunner\bin\mdrv.exe
C:\HP Loadrunner\bin\HP.Utt.StandaloneDebugger.exe
Any suggestions how to fix this. Thanks

Hi,
To trap error message from Forte log, I usually do this
egrep '(EXCEPTION|Exception|exception|ERROR|Error|error)' filename
This takes a regular expression to 'egrep' all occurrences of "exception" or
"error" not matter they are in upper case or lower case.
Hope this help.
Regards,
Peter Sham.
-----Original Message-----
From: [email protected] [SMTP:[email protected]]
Sent: Wednesday, March 17, 1999 12:58 AM
To: Forte-Users (Adresse de messagerie)
Subject: Reporting after many forte tasks run in
batch mode ?
Hi,
I would like to know if overnight builds went okay, and
therefore need to parse the log(s).
The issue is that I don't have a proper string to look for
(i.e. for grep).
If I consider 'ERROR", then the following message won't be
understandable.
There might a way to cheat with the indentation (i.e. the
lines with only two first blank chars)..
Has anyone experimented such a need ?
J-Paul Gabrielli
DTS
SYSTEM ERROR: Service object
MySuperApplicationServer.MySuperMgrSO has
not been partitioned. Therefore, you cannot move it to an
existing partition.
Class: qqsp_UsageException
Error #: [1602, 606]
Detected at: qqcf_StandardConfig::MoveServiceObject at 3
Error Time: Tue Mar 16 17:39:26
Exception occurred (locally) on partition
"Fscript_cl9_Client",
(partitionId =
B84E6180-D639-11D2-82F2-1863030AAA77:0x244:0x1, taskId =
[B84E6180-D639-11D2-82F2-1863030AAA77:0x244:0x1.1]) in
application
"fscript", pid 22713 on node rambo in environment
SuperEnv.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

IP: input-ready query shows data in Load mode but not in Plan mode

Hello experts,
we're currently experiencing a very strange issue regarding an input-ready query which consists of a single lead column (read from the cube) and an input-ready plan column. The issue is as follows:
When the cube is in Load mode the lead column shows its data perfectly. However, when switching to Plan mode the data is not shown.
The cube is indexed by a BIA which may be part of the problem.
We're on BW 7.00 SP 21. I've read that this may be related to the OLAP cache, but haven't been able to find any notes relevant for 7.00 SP 21.
Thanks in advance for any suggestions.
Regards, Dirk

Hi Dirk,
I think that the problem comes from the cache used in the plan buffer query. Delete the cache via RSRCACHE. The query name is
IC/!!1IC if you have a query on an aggregation level on an InfoCube IC
MPRO/!!1MPRO if you have a query on an aggregation level on a multiprovider MPRO or directly on the multiprovider MPRO
You might search for note using 'cache' and component pattern BW-BEX-OT*, e.g. 1408959, 1528191, 1560036.
Regards,
Gregor

Pro9000 Mark II stuck in front load mode

I printed using front load (13x19 sheet) on my last print job. I changed just now to using 8.5x11 (after the printer was shut off) and now it's stuck in front load mode and will not print (unless I printed from front load which makes no sense to do).
Is there a setting I need to change to get it back to normal printing? Getting it into front load is done using the buttons on the front of the printer. Nothing is lit up now except the power button. The bottom tray is down in normal printing mode. The back tray is up.
I opened Print Setting > Quality & Media > Paper Source > change to Rear Tray and hit Save. It doesn't take. I hit Print (Lightroom Print Module) and print queue still says it wants to print from the front tray. When I go back to Print Settings to check the Paper Source it again reads Rear Tray.
Thanks for your help!
Terry

What system are you using? You may need to delete your print spooler (Win). You also need to turn off the printer for some time, overnight, perhaps. Reboot the computer. Turn the printer on.
EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
Photoshop CS6, ACR 9, Lightroom 6

Difference between data update in planning mode and loading mode

Hi gurus,
I am referring to intergrated planning. Planning cube can be loaded and planned.
When the cube is in planning mode, key figure gets overwritten while when its in loading mode, key figures get aggregated. Is this the behaviour?
E.g. Verion V1 is copied to V2 repetatively using copy function and self transformation. what wll be difference
Regards,
Subir.

Hi,
In planning Mode, When you enter planning data, the data is written to a data request of the real-time InfoCube. As soon as the number of records in a data request exceeds a threshold value, the request is closed and a rollup is carried out for this request in defined aggregates (asynchronously). You can still rollup and define aggregates, collapse, and so on, as before.
Depending on the database on which they are based, real-time InfoCubes differ from standard InfoCubes in the way they are indexed and partitioned. For an Oracle DBMS, this means, for example, no bitmap indexes for the fact table and no partitioning (initiated by BI) of the fact table according to the package dimension.
Regards
CSM Reddy

TS1702 When I tried to update existing Pages app it did not complete loading update and has 'locked' into loading mode. I do not want to trash the existing Pages because it contains documents I need. Any advice?

My problem is that when attempting to load updateed Pages the app has frozen in 'loading' mode and will not complete the loading. It is now unusable and does not respond to turning off the iPad and restarting. The Pages icon is in 'shadow' and will not respond . Cannot get the red minus symbol. Can get X symbol but do not want to trash it because it contains many documents I do not want to lose. Suggestions welcome!

Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is app and data safe!

My Imovie app is stuck in loading mode with the spinning wheel

I put a slide show onto my Imovie Application and now when I pull up that app it comes up with the slide show it gets stuck in the spinning wheel loading mode.

If you want to start the Restore Process over then follow these simple steps. Restart computer. Open iTunes on computer. Connect iPhone to computer with USB Cable. Hold both home and power buttons until iTunes recognizes iPhone in Recovery Mode. Usually takes about 20 seconds of holding both buttons. Click Restore button of iTunes.

Apple 23" display, using MacBook V2.1 in boot camp mode with XP Professi

My MacBook has the Intel 950 Graphics card, In Boot camp mode with Windows XP Professional SP3, is there any way to get full screen resolution on the 23" Apple monitor. The windows screen has about 2" of black on all sides of the window

no, tdm doesn't work under bootcamp regardless of which windows is being used, imho i don't think it will ever work under bootcamp

Invalid command in boot strap mode

Hi All,
I am trying to install peoplesoft HRMS 9.1 with PT 8.51.
Firstly I encountered problems running grant.sql ,it showed that PSSTATUS, PSOPRDEFN, PSACCESSPRFL TABLE OR VIEW does not exist.(So i tried following "Using Data Mover, You can login in to the SYSTEM schema and EXPORT those tables (Using the 'EXPORT <RECORD>' instead of 'EXPORT *'). Then using Data Mover again, login to the SYSADM schema and IMPORT the data. NOTE: You will need two DMS scripts, one to export and one to import, as well as making sure you're using the right USER/PW combination" solution).
Secondly I can login to DATA MOVER using three combination of id's and psswds i.e system/oracle(original bootstrap mode id's) and PS/PS, SYSADM/SYSADM but the last two combinations also shows as bootstrap mode inside datamover.
Lastly i triesd to import the three tables from one schema to other by logging in to system/oracle as all three tables are present under this schema but when i run,
set log C:\REF0001_EXPORT.log;
set output C:\REF0001.dat;
export PSSTATUS;
It shows the below error in logs,
Invalid command in boot strap mode
Ended: Tue Jun 14 00:37:12 2011
Unsuccessful completion
Pls help!

Thanks Nicolas,
So now what do you advise me to do...Do i need to start a fresh from scratch??..I beleive half of the tables present r under SYSADM and rest half under SYSTEM..So is there anything which i can do to import those??

"No Sound" on Cold Boots with X-Fi (warm boots or mode changes fix

I recently built a system with the following specs and the computer is ?Cold Booting? with ?no sound? in Entertainment Mode or ?Noise? for sound if the X-Fi is cold booted from Game Mode. A warm boot or Mode change usually fixes it but the problem comes back upon cold booting. The computer Specs are: Windows XP Pro. (SP2)AMD X2 4800+ASUS A8N5X nForce4 Motherboard (latest BIOS)Corsair TWINX2048-3500LLeVGA 7900GTX (latest Drivers)OCZ 600W GameXstream PSSound Blaster X-Fi Platinum (latest Drivers, etc.)
I have no IRQ Conflicts and the onboard sound is ?disabled?. The problem seemed to appear after a week or so working with the system. Everything else is perfect on the system and it'ss very frustrating to have this issue. I am not convinced that the sound card is bad, I think it'ss a Creative driver/software issue. Does anyone else have this problem and or is there a fix ?
!!! PLEASE HELP !!!

EXACTLY THE SAME PROBLEM HERE!
I havent got another motherboard to test my x-fi xtreme music on, but it's a very frustrating problem, if i boot up from cold the soundcard is either not recognised or is recognised but there's no sound output.
My motherboard is ASUS P5E3 Pro,
Memory: 8GB OCZ DDR3 600
Cpu: x9650 extreme @ stock 3.0GHz
Psu: Coolermaster 850w modular
Gfx: HD 5770 (will be changing this to a HD4890 soon as it's rubbish)
Ive tried all sorts of combinations to try and get this soundcard working properly, stick of ram, etc... NOTHING WORKS AND IM ANNOYED!
Ive played about with just about every bios setting i can find (theres a lot on this board) and still no luck, i've got the latest bios flashed and everything is upto date, as a musician this problem is very irritating, having to reboot the computer about 3 times to get the sound working! even then theres problems with sound drop-outs.
Makes no difference if i use windowsXP or windows7 the problem still remains, i might ask asus to make a bios update for this problem because im not sure if creative have the answers.

Ipod is stuck in apple boot up mode please help!

My son was trying to erase his content on this old ipod touch and it is now stuck in the boot up mode. If we try to reset by holding sleep/hold buttons it will look like it is trying to boot up and then spinning gear will stop. Then later it will restart again but nothing ever happens. This has gone on for over 5 hours. Tried hooking it up to computer to restore thru iTunes but would not recognize ipod. Any way to fix. Would really like to get this working so I can use it.

Try reading this: http://support.apple.com/kb/HT1808

My yahoo mail wont open. It opens in IE but not in Firefox. Its just stays in page loading mode and never actually loading or going to an error page. Can you help?

I also have a problem with my Facebook page where the page doesn't fully load and I cannot see the people who are live in chat.
I have been able to login on occasion by googling yahoo mail and logging through the Google link but that is not working tonight.
Paul

By the way, the safari setting is: private browsing off and accept cookies from visited. Much help is appreciated!

Game from app store is in "loading mode". I tried to sink with my desktop, but get message that game is too big. how do I remove this app if it has not completed loading on the ipad

I got a game from the App Store. It is "loading" on the Ipad. I tried to sink Ipad and desktop, but game is still loading. How do I get this to stop loading. I actually don't want it to continue loading on the Ipad. How do I stop/delete the download?

If it has a cloud icon it means its no longer on your device. Tapping on the cloud will effectively reinstall the App from scratch to your device.
There is no way to remove it from the cloud because its not yours to remove from there. Its the general App repository, you are just given access to it to download content you've already purchased.

HT201412 My slotomanis application is not responding. It goes continuously in thr loading mode. This started 3 days ago after a prompt to update. This is the only app I have this problem with.

My slotomania app is not loading. This has been going on for 3 days ever since I followed the app store prompt to upgrade.

Close the slotomanis app on the Task Bar and re-launch.
1. Double-click the Home button to reveal Task Bar
2. Hold slotomanis app down for a second or two until you see the minus sign
3. Tap the minus sign to close app
4. Tap area above Task Bar to return to Home screen

C1250 AP loading in boot loader mode

Similar Messages

Maybe you are looking for