C170 Ironport error "The query domain.name.accept failed

Dear Community,
I have two Cisco C170 Ironport devices. Each is throwing the following error:
"The query <domain.name.accept> failed with result inquiry timed out."
I have been unable to decipher it and was hoping anyone might possibly have a clue to look for the resolution.
I would be very grateful Community.
Thanks.
Rocky

Hey Rocky,
This seems to be an error on an LDAP accept query that is configured on the appliance.
If you have indeed created an LDAP accept query, please check connectivity from the appliance to your AD servers currently set.
Please go to GUI > System Admin > LDAP
Here you can check connectivity to the AD servers and also run a test accept query.
Please attempt these tests and let us know the results.
Judging from the error, I am assuming that the LDAP accept query test will fail resulting in a time out, if it does this usually indicates either the AD server was not properly setup on the appliance, if so, you will need to ensure that your firewalls if any are in place is allowing the query traffic from the appliance to the AD server
Please let us know.
Regards,
Matthew

Similar Messages

CommonSearchParseException: Error building query, common name {0} specified

Hi,
I have installed Content Server and I have setup CIS on Oracle OC4J standalone. I have also validated the configuration by the action "Validate communication with Oracle Content Server".
I tried to execute the sample program CommonSearch from SDK.
The program is taking a default query as "$author <substring> 'Adm'" and default metadata map from /resources/ucpmcommon-metamap-default.xml ]
But I got the following error:
CommonSearchParseException: Error building query, common name {0} specified but is not mapped.
at com.stellent.cis.client.command.impl.services.CommandExecutorService.executeCommand(CommandExecutorService.java:62)
     at com.stellent.cis.client.command.impl.CommandFacade.executeCommand(CommandFacade.java:158)
     at com.stellent.cis.client.command.impl.BaseCommandAPI.invokeCommand(BaseCommandAPI.java:84)
     at com.stellent.cis.client.api.common.search.impl.CISSearchAPI.search(CISSearchAPI.java:59)
     at com.stellent.cis.sdk.samples.search.CommonSearch.execute(CommonSearch.java:78)
I have configured the adapterconfig.xml matching the CIS adapter config in OC4J as given below:
<?xml version="1.0" ?>
<config>
     <adapter type="scs" default="true" name="myadapter">
          <config>
<property name="port">4444</property>
<property name="host">localhost</property>
<property name="type">web</property>
<property name="contentServerAdminID">sysadmin</property>
<property name="contentServerAdminPassword">idc</property>
          </config>
          <beans template="classpath:/META-INF/resources/adapter/adapter-services-scs.jxml"/>
     </adapter>
</config>
My metada map is the default mapping as follows
<metamap>
<adapter name="scsadapter">
<common>
<map name="Title" native="dDocTitle" />
<map name="Author" native="dDocAuthor" />
<map name="Date" native="dInDate" />
<map name="ID" native="dID" />
</common>
<contribution>

<native name="comments" default="" override="true" />

<common name="title" />
<common name="author" />
</contribution>
</adapter>
</metamap>
When is this error "common name {0} specified but is not mapped" thrown? Is my metadata map file correct?
Thanks
Raji

Hi,
I changed the query and executed the program, still getting the same error. I have followed the instructions in CIS developer guide to create the metamap file but unable to figure out the reason for the error. Any other suggestions?
Thanks
Raji

Hi, l authorized my computer using iTunes and it said successful, but when l start syncing my applications l get this error: "The iPhone "My name" could not be synced because this computer is no longer authorized for purchased items that are on this phone

hi, l authorized my computer using iTunes and it said successful, but when l start syncing my applications l get this error: "The iPhone "My name" could not be synced because this computer is no longer authorized for purchased items that are on this phone".
May you help
Thanks

Try TS1389: iTunes repeatedly prompts to authorize computer to play iTunes Store purchases.
tt2

BMR-SS backup fails with error "the specified network name is no longer available"

We are running DPM 2012 SP1 on a Windows Server 2008 R2 system, backing up a Windows Server 2012 system that is a DC. The agent version is 4.1.3417.0. Both the DPM server and the DC are physical systems - brand new HP Proliant 360's.
When creating the replicas for the 2012 server the first time, the backups work fine, and then for a day or so after that. After a couple of days, the BMR-SS backups fail with the error "the specified network name is no longer available".
I can watch the backup happening in the Windows Server Backup console on the protected server - the BMR backup goes up to 99% and then fails. BMR backups on all the other servers are working - we have a mix of Win2008R2 and Win2012.
Here is what I have tried:
I can connect to the UNC path on the backup server without a problem during and after the backup is happening.
Tried reinstalling the DPM agent.
Tried backing up directly from the protected server to another server's network share, which worked.
I can copy multiple gigabyte files directly from the protected server to the DPM file share without a problem (the same one that DPM uses for the replica)
Tried turning off the SCEP real-time protection during the backup.
Any help would be appreciated - thanks.
KW

llo Boudewijn
I followed Boudewijn's suggestion.
The Windows 2012R2 servers had no recovery partition in disk C. I created one (400MB) following http://support.microsoft.com/kb/2930294/en-us and
DPM system restore worked. But just once.
So this is not the solution to the problem......
Is no one else having issues with DPM bare metal protection of Windows 2012R2 servers?

Convert database IP link with the sub-domain name

Can someone help me to covert the database ip with the SUB-domain name ?
Kind regards,
Shar Kurtishi
Freelance Consultant
10000 Prishtina, KOSOVO
+377.44.210.456

Hi Shar,
You can use unix "nslookup" to get the domain from up or viceversa.
The aim to get the info frm the dns server.
Regards,
Chandan

Export Tasksequence fail with error "The filename, directory name, or volume label syntax is incorrect"

Hello
When I try to Export a Task Sequence I recive the following error in the Export Wizard
Error: The filename, Directory name, or volume Label Syntax is incorrect
Dos someone now this error or is ther a log with more Information? In the Log TaskSequenceProvider.log I dont find any error.
Andreas

Hi Jörgen
Thanks for the Answer, I have exported do the Root of
a Drive.<o:p></o:p>
Put I have found the Problem, a Application Package pointed
to a Source path that doesn’t exists any more<o:p></o:p>
Andreas

Easiest way to know the query group name?

Hello All,
This has been nagging at me for quite some time now. Would appreciate you inputs on the ways to find out the query group name for a set of queries we see on the UI.
The obvious method is to search your query group from the list of query groups that system shows when we navigate to Setup->Queries and Reports->Query Groups. Do we have some other ways as well.
Thanks In Advance
Devesh

Hi Devesh,
If you know the query definition then the easiest way to find the query group would be to use "Search Query Groups by Queries Used" query on the Query Groups list page. This query allows you to select a query definition and returns the query group using the query.
Or you could use "Query Group Review" query on the Query Groups list page. This returns all queries within all Query Groups. You can further refine your search by Query Name or Internal Name of the query you are interested in.
If you want to do a general search for all buy-side list page or buy-side picker page query groups, search for <buylist> and <buypick> respectively.
Hope this helps.
Regards,
Vikram

Find the full domain names?

Hi,
Where can i found the full domain names in application server?
for example,
suppose, i am installed in portal, discoverer, etc.,
http://...:7778/pls/portal
http://...7781/discoverer/plus
Thanks!

Hi,
You can find your full computer name at My Computer > Properties > Computer name.
If your machine is not under any domain, as in case of Home PC, then you will have workgroup name instead of domain name.
You can install portal,discoverer, etc in both cases.
Cheers!
Yogini

Access RemoteApp error: The User Profile Service service failed the sign-in

I have couple of users in MYAPPS group that is a part of Collection.
Only me (domain admin) and other domain member user can access the app from RDWEB.
When an other domain admin and an another domain user try to access the app (from different machines) they get:
"Access RemoteApp error: The User Profile Service service failed the sign-in"
RDS is Server 2012 R2 clients W7, W8.
I found all kind of troubleshooting for Vista and W7 non RDS scenario.
What it could be? A bit confusing... one admin Yes another no. The same for regular domain member
1. users can login to RD Web (https:../rdweb) . The published app appears
2. When clicking on the app icon the screen below appears
"When you hit a wrong note it's the next note that makes it good or bad". Miles Davis

Checked Event. There were errors indicating that default profile files cannot be copied to user_name profile.
One of them:
Windows cannot copy file
\\?\C:\Users\Default\AppData\Local\Microsoft\Windows\WinX\Group3\08 - Power Options.lnk to location
\\?\C:\Users\blue\AppData\Local\Microsoft\Windows\WinX\Group3\08 - Power Options.lnk. This error may be caused by network problems or insufficient security rights.
DETAIL - The process cannot access the file because it is being used by another process.
After doing more research I found a suggestion that actually fixed the problem instantly:
-- We also see this problem. You should try to uninstall KB2919355 --
Other people experience the same problem with RDS 2012.
Here is the discussion:
http://serverfault.com/questions/590651/copying-default-profile-for-new-users-fails-with-the-process-cannot-access-the
I did check KB2919355. It looks like pretty important...
All future security and nonsecurity updates for W8.1 and 2012 R2 require this update to be installed...
So how to deal with this thing?
May be somebody from Microsoft will see this post and can suggest other workaround instead of removing the important patch.
Thanks Jay for pushing me to check Event :)
"When you hit a wrong note it's the next note that makes it good or bad". Miles Davis

The creation of the shadow copy on the backup destination has failed. Detailed Error: The Volume Shadow Copy operation failed with the error 0x80042316

When using Microsoft Backup on a Windows Server 2008 SP2 (not R2 - [Microsoft version 6.0.6002]) I get the error "The creation of the shadow copy on the backup destination has failed. Detailed Error: The Volume Shadow Copy operation failed with the
error 0x80042316"
The odd thing is that when I start the backup manually, it works fine. When it runs automatically the error appears.
When doing a SFC /scannow I do get errors that can't be corrected.
Is there anything short of rebuilding this machine (It's a DC and the only one this office has) I can do to fix this?

Hi,
0x80042316 means "Another shadow copy creation is already in progress". This error could occur when another VSS instance is running.
Is there any third party backup application installed? Try to uninstall it to see the result. And please also check if there is another backup schedule which causes the conflict.
Meanwhile please provide the result of:
vssadmin list providers
vssadmin list writers
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected].
Hi,
I do have Crashplan ProE running. It started at 1900 and the Windows Backup starts at 2000. I have modified Crashplan not to start until 2300 to see if that helps.
Also:
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2005 Microsoft Corp.
Provider name: 'Microsoft Software Shadow Copy provider 1.0'
Provider type: System
Provider Id: {b5946137-7b9f-4925-af80-51abd60b20d5}
Version: 1.0.0.7
AND:
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2005 Microsoft Corp.
Writer name: 'System Writer'
Writer Id: {e8132975-6f93-4464-a53e-1050253ae220}
Writer Instance Id: {f0c7ee55-5885-4894-8dd3-14fffbdd4d2e}
State: [1] Stable
Last error: No error
Writer name: 'SqlServerWriter'
Writer Id: {a65faa63-5ea8-4ebc-9dbd-a0c4db26912a}
Writer Instance Id: {017a0133-7577-4322-b513-04f72404b70a}
State: [1] Stable
Last error: No error
Writer name: 'ASR Writer'
Writer Id: {be000cbe-11fe-4426-9c58-531aa6355fc4}
Writer Instance Id: {6b17d670-9ea8-4ff1-a59e-b474f4b893db}
State: [1] Stable
Last error: No error
Writer name: 'Shadow Copy Optimization Writer'
Writer Id: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
Writer Instance Id: {56aad1bf-9bf1-4fde-b2f4-a706577c632d}
State: [1] Stable
Last error: No error
Writer name: 'COM+ REGDB Writer'
Writer Id: {542da469-d3e1-473c-9f4f-7847f01fc64f}
Writer Instance Id: {e942d09d-276e-450a-9bf4-b1d5abe6af8a}
State: [1] Stable
Last error: No error
Writer name: 'Registry Writer'
Writer Id: {afbab4a2-367d-4d15-a586-71dbb18f8485}
Writer Instance Id: {3737164b-61ac-454c-b1f7-42f2620f10db}
State: [1] Stable
Last error: No error
Writer name: 'DFS Replication service writer'
Writer Id: {2707761b-2324-473d-88eb-eb007a359533}
Writer Instance Id: {39458257-aca4-481e-a302-994f3eb1e9a3}
State: [1] Stable
Last error: No error
Writer name: 'Dhcp Jet Writer'
Writer Id: {be9ac81e-3619-421f-920f-4c6fea9e93ad}
Writer Instance Id: {6a8ab4aa-760c-4102-a27f-58f570c9c572}
State: [1] Stable
Last error: No error
Writer name: 'NTDS'
Writer Id: {b2014c9e-8711-4c5c-a5a9-3cf384484757}
Writer Instance Id: {53577013-8397-448e-9a25-c7cac08aa0a8}
State: [1] Stable
Last error: No error
Writer name: 'IIS Metabase Writer'
Writer Id: {59b1f0cf-90ef-465f-9609-6ca8b2938366}
Writer Instance Id: {ee2c9173-92e7-455c-8f73-601647c0ddb2}
State: [1] Stable
Last error: No error
Writer name: 'BITS Writer'
Writer Id: {4969d978-be47-48b0-b100-f328f07ac1e0}
Writer Instance Id: {b1f60392-9dfd-4e3a-bda6-3dc2cb622ba4}
State: [1] Stable
Last error: No error
Writer name: 'IIS Config Writer'
Writer Id: {2a40fd15-dfca-4aa8-a654-1f8c654603f6}
Writer Instance Id: {a328aede-78f0-448e-9c36-e8379e9fe2a8}
State: [1] Stable
Last error: No error
Writer name: 'WMI Writer'
Writer Id: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}
Writer Instance Id: {c39fa334-5c9d-4906-a3b5-33c3444948e6}
State: [1] Stable
Last error: No error
Writer name: 'NPS VSS Writer'
Writer Id: {35e81631-13e1-48db-97fc-d5bc721bb18a}
Writer Instance Id: {3c9c5584-b5fd-48cf-8541-0c8bfa585ca0}
State: [1] Stable
Last error: No error

VSI error: The virus scan adatper load failed

Hi Team,
I am working on Configuration of the Virus Scan Interface in SRM ABAPServer.
As a first Step I tried configuring Virus Scan Adapter by keeping the
vssap.dll on the server location D:\usr\sap\SID\SYS\exe\uc\NTAMD64\.
When I start Virus Scan Adapter after configuration, its failing with
the follwoing error.
Could not start the engine of VSA_hostname. Error: "VSI error:
The virus scan adatper load failed."
We are on the latest kernel patch level
Can you please help into the issue.
REgards
Ponnusamy

Hello,
your problem is not related to SRM but to Basis Components: check OSS notes for Virus Scan Interface.
Regards.
Laurent.

How do i fix; printing error; the adobe print engine has failed to output your data due to an unknow

how do i fix; printing error; the adobe print engine has failed to output your data due to an unknow problem.

Things to try:
Reboot.
Remove minor corruption by exporting.
Adobe Community: File Crashing on Output - printing/PDF/other

RDS Gateway + Smart Card Error [ The specified user name does not exist.]

I have the following Windows Server 2008 R2 servers:
addsdc.contoso.com, AD DS Domain Controller for contoso.com
adcsca.contoso.com, AD CS Enterprise CA, CDPs/AIAs published externally.
fileserver.contoso.com, RDS Session Host for Administration enabled
rdsgateway.contoso.com, RDS Gateway enabled
tmgserver.contoso.com, 'Publishing' rdsgateway.contoso.com but with pass-through authentication
And the following Windows 7 PCs:
internalclient.contoso.com
externalclient.fabrikam.com
There's no trust between the domains, the external client is completely separate on the internet but the CA certificate for contoso.com has been installed in the trusted Root CA store. All servers have certificates for secure RDP.
I enrolled for a custom 'Smart Card Authentication' certificate with Client Authentication and Smart Card Logon EKUs from the CA, stored on my new Gemalto smart card using the Microsoft Base Smart Card CSP.
From internalclient.contoso.com, I can RDP to fileserver.contoso.com
using the smart card just fine with no certificate errors.
From externalclient.fabrikam.com, I can RDP to fileserver.contoso.com
via rdsgateway.contoso.com using a username and password just fine with no certificate errors.
From externalclient.fabrikam.com, I can RDP to fileserver.contoso.com
via rdsgateway.contoso.com using the smart card to authenticate to the gateway, and a username and password to authenticate to the end server, just fine.
BUT from when using a smart card to authenticate to the end server via the gateway, it fails with:
The specified user name does not exist. Verify the username and try logging in again. If the problem continues, contact your system administrator or technical support.
When I move the client into the internal network and try the connection again (still via the RDS Gateway), it works fine - the only thing I can think of is being outside the network and not being able to contact the AD DS DC for Kerberos is causing the issue
- but I'm pretty sure this is a supported scenario?
The smart card works fine internally, the subject of the certificate is the user's common name (John Smith) and the only SAN is
[email protected] which matches the UPN of the user account as it was auto-enrolled.
Does anyone have any ideas?

I had a similar issue where I am using a smart card through a Remote Desktop Gateway. I had to disable Network Level Authentication (NLA) on the destination Remote Desktop Server. If anyone has another way around this, I'd appreciate hearing it. I'd prefer
to use NLA.

How to change the root domain name in window 2012 server

Got a window 2012 server build up. My root domain name looks something like corp.marketing Well I seems to have missed to add the last .com or .local. How do I add the .com to my existing root domain name please. The server is new, will
go online in few days time. Thanks for all the help.

I have a similar question and not sure if this is the right place. I had set a server with corp.brighterworld.com but the install wizard anywhere access had me believe that microsoft's strongly preferred domain name prefix was remote.brighterworld.com so
I contacted GoDaddy and had it reissued as remote. but when I went to reconfigure for the new name. I had already set the server for being a CA, and in that process it issued like 4 or 5 certificates. So I had tried to rebuild the machine from scratch, but
the it didn't wipe everything, but rather saved previous state which left the old certificate stuff to be dealt with. Any hints or help out here for us having to learn this stuff the hard way?
Thanks,
Mark Saxton

Changing the default domain name of the server.

I know this is not the correct title for the topic. but its the best word i could found on my voculabary.
here's my problem.
Im using Sun App Server 9. the server is installed in the local machine. for testing purposes client access from the local server is sufficient. I deployed a web service using net beans 5.5. My problem is that the WSDL file is generated (by server) uses a fully qualified domain name rather than localhost. for example it uses http://mlb.stdmlb.sliit.lk:8080. When i try to create a client using netbeans it tries to access the server using this address (the one in the WSDL) but the firewall denies access to port 8080. Therefore i want to use the server to use localhost rather than the long domai name. (at least http://mlb) Can anyone tell me how to configure this?
Lahiru

These are the steps for changing domain name & IP address without reinstall
a) Stop the Gateway and Server .
b) Export the profile server database to a flat ldif file:
# /opt/netscape/directory4/slapd-host_name/db2ldif /temp/profile.ldif
c) Use awk, perl, or vi, to change every instance of the system domainname in the ldif file to that of the new system.
d) Import the edited ldif file into the profile server on the new machine:
# /opt/netscape/directory4/slapd-/ldif2db -i /temp/profile.ldif
e) edit etc/opt/SUNWips/platform.conf and change all the domain name & Ip address
f) edit /etc/opt/SUNWips/properties.file change the domain name
g) Start the platform server and gateway on the new machine.

C170 Ironport error "The query domain.name.accept failed

Similar Messages

Maybe you are looking for