C2-01 Camera Problem - Displays Camera On Standby

My cellphone is Nokia c2-01. When clicked on camera, it shows 'camera on standby'. My memory care is ok and has large space. I don't know how to fix it. Please help. Thanks

That is quite a common issue. In all cases, I am aware of, this is a hardware failure: Your camera is broken.

Similar Messages

CAMERA ON STANDBY & DO NOT KNOW HOW TO CHANGE IT

CAMERA ON STANDBY & DO NOT KNOW HOW TO CHANGE IT?
Since the phone has come back from repair I can not use the camera feature, I have no idea how to remove "Camera on standby"
Regards
John

They always perform a software update after a repair, but it sounds like in your case something went wrong here.
You don't say what kind of phone you have. If it is an S60 "Symbian" model, you can reformat it with the code *#7370#; if the phone is compatible with NSU (www.nokia.com/softwareupdate) you could reinstall the latest software yourself using your PC.
Failing both of those, you would have to go back to the repairer and tell them a new problem has been caused by the work they did.
Message Edited by mccbleue on 23-Feb-2009 07:57 PM

Nokia 6101 - camera on standby?

hi,
I wonder if anyone could possibly advise me what to do with my phone (nokia 6101). I tried to use the camera recently only for it to come up with "operation failed" after a couple of seconds, and then "camera on standby". After pressing continue it again came up with "operation failed" and it goes on and on etc...
I've had problems with the phone before (dead pixels after 1 day) and had it replaced in around Jan/Feb, so I was wondering if the warranty with nokia is still valid on this 2nd phone (if there even is one), and if the above problem could be fixed!
Thanks
x

Same problem on my 6101 (3 weeks old). Removing both the battery and SIMM for serveral minutes worked once but the fault has returned. Looks like I'll have to send it away for repair or replacement under warranty.

Camera on standby

I have just done the software upgrade on my 5610 XPress Music - now i get the message - "Camera on standby" and cannot turn this message off or use camera - is there a problem with latest update - i re-did download - changed mem card - formatted mem card - still same - any suggestions

Reset to factory default & check again. You provably got a backup already.
Message Edited by android on 23-Nov-2008 01:09 PM
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

C3- camera on standby (need a solution)

I have a c3 phone. Couple of days back when I go to the camera it displays the massage *Operation Failed and then camera on standby*
I need the solution .... ??

Have you recently updated the firmware of the phone?
blitZkid
Nokia C7: Running on Nokia Belle
"If I'm helpful in anyway, a click of appreciation on the star would be nice"

6303i camera on standby????

my phone is about 2 weeks old and the other day when i tried to take a pic it says camera on standby and is still the same way. is there any easy to fix it or do i get a qualified person to fix it.
cheer's pat.

normally camera goes to standby mode when battery is low. if it is not the problem you mentioned, take it to where ever you bought.
Glad to help

5310 camera on standby

Myphone's camera will not work but just tells me "camera on standby". I have updated the software, cleared the memory and restored factory settings but none of these have worked! Any suggestions gratefully received please

please try this solution, hope it works
/discussions/board/message?board.id=phones&message.id=59232&jump=true

Problem displaying CLOB in text file

Hello All,
I have a problem displaying the content from the database in notepad. When I click on a link on my jsf screen, I retrieve the data and display it in notepad.
I have my text content stored in the database with CLOB datatype. When I look in the database the data looks in the following format:
---------STARTS FROM NEXT LINE-------------
The firm, known for its keen oversight of products, has been the subject of complaints from firms who have had apps blocked from the store. Some developers have complained that the company's rules seem inconsistent.
Some have found apps blocked after seemingly minor updates, or for having content deemed inappropriate by them. In light of this, and after careful consideration, I believe it is unnecessary to sign this measure at this time.
Sincerely,
ABC
----------ENDS IN THE PREVIOUS LINE------------
Now when I display this content onto the notepad, all the spaces and new line characters are lost, and the entire display looks awkward. This is how it looks:
The firm, known for its keen oversight of products, has been the subject of complaints from firms who have had apps blocked from the store. Some developers have complained that the company's rules seem inconsistent.[]Some have found apps blocked after seemingly minor updates, or for having content deemed inappropriate by them. In light of this, and after careful consideration, I believe it is unnecessary to sign this measure at this time.[]Sincerely,[]ABC
All the new line characters are lost and it just puts some junk character in place of a new line.
When I copy the same text onto textpad, everything is alright and it displays exactly the way it is present in the database. I am also open to display the content in html, but in HTML it doesn't even display me the junk character in place of new line. It is just one single string without any line separators.
I am using the following code to put the content into the text.
public String writeMessage(){
   OutputStream outStream = null;
   HttpServletResponse response = getServletResponseFromFacesContext();
   Reader data = null;
   Writer writer = null;
   try{
      response.reset();
      response.setContentType("text/plain; charset=UTF-8");
      response.setHeader("Content-Disposition","attachment; filename="+id+"_Message.txt");
      outStream = response.getOutputStream();
      QueryRemote remote = serviceLocator.getQueriessEJB();
      data = remote.retrieveGovernorsVetoMessage(billId);
      writer = new BufferedWriter(new OutputStreamWriter( outStream, "UTF-8" ) );
      int charsRead;
      char[] cbuf = new char[1024];
      while ((charsRead = data.read(cbuf)) != -1) {
         System.out.println(charsRead);
      writer.write(cbuf, 0, charsRead);
      writer.flush();
   }catch(Exception ex){
      ex.printStackTrace();
   }finally{
      //Close outStream, data, writer
      facesContext.responseComplete();
   return null;
}Any help or hints on resolving this issue would be highly appreciated.
Thanks.

The data is imported from a third party application to my database. It doesn't display any newline characters when I view the data.
But when I do a regular expression search on text pad, I could see that my clob contains \n as the new line character. Is there a way to replace \n with \n\r while writing the data.
Thanks.

Problem displaying picture stored in mySQL

Hi, i just have got problem displaying picture stored in database as BLOB and presented on JSP over servlet. Below is my code i am using to upload file into database, than download it and display again. The result is the picture can not draw inself and there is always only empty picture space on the web page i am displaying. Please help me to find why it is not working, thanx.
servlet uploading picture to database
               boolean isMultipart = FileUpload.isMultipartContent(req);
               DiskFileUpload upload = new DiskFileUpload();
               List items = upload.parseRequest(req);
               Hashtable textFields = new Hashtable();
               byte[] data = new byte[4096];
               if(isMultipart)
                    Iterator iter = items.iterator();
                    while(iter.hasNext())
                         FileItem item = (FileItem)iter.next();
                         if(item.isFormField())
                              textFields.put(item.getFieldName(), item.getString());
                         }else{
                              data = item.get();
               String sqlStatement = "INSERT INTO cds VALUES('" textFields.get("id")"'," +
                                        "'" textFields.get("album") "','" textFields.get("interpreter") "'," +
                                                  "'" textFields.get("gr1") "','" textFields.get("gr2") "','" textFields.get("price") "')";
               String sqlStatement2 = "INSERT INTO pics VALUES('" textFields.get("id") "','" data "')";
servlet to download picture
String SQL =
     "SELECT Picture " +
     "FROM pics " +
     "WHERE id = '" + request.getParameter("id") + "'";
     ResultSet rs = stmt.executeQuery(SQL);
     rs.next();
     Blob blob = null;
     blob = rs.getBlob(1);
     response.setContentType("image/jpg");
     request.setAttribute("blob", blob);
     System.out.println("just above OutputStream");
     InputStream in = blob.getBinaryStream();
     ServletOutputStream sout = response.getOutputStream();
     int b;
     while ((b = in.read()) != -1) {
     sout.write(b);
     in.close();
     sout.flush();
     sout.close();
img tag in JSP
<img src="LoadImageServlet?id=some id>
plus i am using
Tomcat 5.0
mySQL 4.0
debuging in eclipse
thanx for help once more, Libor.

1:
are there any exceptions throws by the jdbc code
2:
is the code in a doGet
3:
you should do a if(result.next())
4:
Is your mapping code working

Problems displaying in IE

While I love iWeb's ease of use, it seems to have serious problems displaying on IE. There is really no point blaming IE, since it is the dominant browser and most people who will see our sites will use it. The point of iWeb should be to allow people to communicate broadly and effectively, not just to Mac & Safari users.
Lists do not work well. The indents do not display properly. Text in boxes shift alignment and location. Bullets show up with different sizes. I have had to hand indent and line space all the lists in the sites I make, which is a mess and not scaleable.
See fieldsforkidsmamk.org.
Are there any workarounds or fixes?
The other obvious issues with iWeb are worth noting:
* inconsistent display in browsers -- pages look different in Safari and Firefox, even on the Mac (let alone IE)
* difficulty adding html code
* page names must be identical to nav names, so pages with multiple words (Get Involved) display urls as /Get%20Involved (can't be corrected unless you have Get_Involved as a header.)
* need to publish whole site for any change
* need to publish all sites for each change to any site
* can't change color, display, location, function etc for Nav
I assume everyone is aware of these problems. The question is, what to do? Grin and bear it? Any help, tips or ideas would be appreciated.
Thanks!
MacBook Mac OS X (10.4.8)
MacBook Mac OS X (10.4.8)
MacBook Mac OS X (10.4.8)
MacBook Mac OS X (10.4.8)

* page names must be identical to nav names, so pages
with multiple words (Get Involved) display urls as
/Get%20Involved (can't be corrected unless you have
Get_Involved as a header.)
You can fix this the same way you add html code, by post processing.
* need to publish all sites for each change to any
site
You can fix this by separating your sites into different Domain files so you only publish one at a time.
Contrary to the other response, "encoding" is not connected to the points you made. There is never any need to add a UTF-8 "tag" to an iWeb page. If you see question marks or Â's when your page is displayed on any browser, Mac or PC, then you may need to fix your ftp or server settings.

Problems displaying rtf memo fields

Post Author: Davidm
CA Forum: General
We use Crystal Reports X to run reports on an Access database with a significant number of rtf memo fields. We use Total Access Memo to allow extended use of rtf within Access as our users require the additional formatting capabilities that this offers.
However, there are considerable problems displaying items like bullet points, tables and hyperlinks in the Crystal Viewer with tables in particular coming out in a real mess with all entries in the table being displayed in a list with a small square marking each cell at the end of each line.
Curiously, if you preview the report in the full version of Crystal X, it appears a bit better with the hyperlinks still underlined (bullet points still vanish) and rows in rtf tables are at least presented as a row even if the columns are not ordered and mixed (with no bounding cells visible).
Firstly, is this disparity of end result between full Crystal X Print Preview and the Crystal X Viewer fixable?
Secondly, is the limited handling of rtf tags likely to be solved in the next release of Crystal?

Hi Mathias,
If I caught you correctly, you want to display data in Adobe forms in form of tabel, right?
So, follow the steps:
1. Insert one sub form on your adobe form.
2. Set its type as "flow content" in object->subform property.
3. Set flow direction as "Table".
4. Insert another subform inside this subform.
5. set its type as "flow content" and flow direction as "Table row".
6. Now, choose binding tab, and there check "repeat subform for each Data item check box" and specify min. count for your rows.
7. Now, insert your column fields inside this sub form once.
8. Format its look and feel as you want.
When you run this application, it will show you multiple data as table on Adobe form.
Regards,
Bhavik

Problem displaying php page in dreamweaver

I am having problems displaying php scripting on dreamweaver.
Need your advice.
Installed dreamweaver 8, Coldfusion 7, mysql, php5.2 (using
windows installer).
Created file test.php ror testing containing
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
<title>Untitled Document</title>
</head>
<body>
date is:<b><?php echo Hello ?></b>
</body>
</html>

ulises_arsi wrote:
> I am having problems displaying php scripting on
dreamweaver.
Tell us what the problems are.
> Installed dreamweaver 8, Coldfusion 7, mysql, php5.2
(using windows installer).
PHP needs to be configured with a web server, such as Apache
or IIS.
ColdFusion is also a webserver, but as far as I know, it
cannot be
configured to serve PHP pages.
> date is:
<?php echo Hello ?>
The only thing that would display is an error message. Hello
needs to be
enclosed in quotes:
<?php echo 'Hello'; ?>
David Powers
Adobe Community Expert
Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
http://foundationphp.com/

've recently upgraded to FireFox v22.0. Originally, a legacy XBAP I use always opened correctly in FireFox and had no problems displaying or running. As of v22.

I've recently upgraded to FireFox 22. Originally, a legacy XBAP I use always opened correctly in FireFox and had no problems displaying or running. As of 22, it won't even attempt to download the application, let alone try and display it.
I have the windows Presentation Foundation 3.5.30729.1 installed, which is the same version I have been using in older versions.
Can anyone shed some light on any changes that would have effected this?

Hi, I have a similar problem. I did attempt the *.rdf fix on a test system, but it didn't work (em:maxVersion was already 22).
We got about inflow of phone calls from our clients experiencing the problem mentioned above from the 2nd of July onwards... and more are phoning in.
All the complaints come from clients (+- 10 so far and rising in number) using Firefox v22 (we have checked), and all of them have said that it was working previously.
We downgraded one of the clients to an older version of Firefox, and it worked again. So far we are telling our clients to downgrade until a fix comes out, or use Internet Explorer (*blush*)

Problem Displaying data from oracle in JTable

Please can any one help me? I have a problem displaying the data fetched from oracle database(ResultSet) in JTables. Can any one provide me with any possible way out(and any alternative).

User,
As suggested in the other post - Google/Books/find a mentor is the best option.

Problems displaying itab with 'REUSE_ALV_GRID_DISPLAY'

Hi experts!
I have a problem displaying the internal table itab_test. Itab_uload is a TYPE TABLE of a complex and nested structure I defined in the DDIC. I am able to pass the entries, which are not conform with the specifications, to itab_test, but when I execute the program I get a short dump.
Error message is:" It was tried to pass the internal table IT_FIELDCAT to the formal parameter IT_FIELDCAT. In doing so, a ^type conflict occured between the formal and the actual parameter."
Can anybody please advise on the code-sample below. What did I wrong and what can I do to correct it?
Thanks a lot for your help!
Johann
P.S.:Points will be rewarded for helpful answers!
*&          DECLARATIONS
TYPES: BEGIN OF error_test,
       oz TYPE c,
       bez TYPE c,
       END OF error_test.
DATA: itab_test TYPE TABLE OF error_test WITH HEADER LINE,
      itab_upload TYPE TABLE OF zstr_gaeb WITH HEADER LINE.
DATA: wa_upload TYPE zstr_gaeb,
      wa_lvbereich TYPE zstr_lvbereich,
      wa_bereichdeslv TYPE zstr_bereichdeslv,
      wa_beschreibung TYPE zstr_lvbeschreibung,
      wa_position TYPE zstr_position.
DATA :      it_fieldcat TYPE lvc_t_fcat,
          wa_fieldcat LIKE LINE OF it_fieldcat,
          wrk_pos TYPE i.
*&           START OF SELECTION
START-OF-SELECTION.
LOOP AT itab_upload INTO wa_upload.
    LOOP AT wa_upload-vergabe-lv-lvbereich INTO wa_lvbereich.
      oz_len = STRLEN( wa_lvbereich-oz ).
      IF oz_len <> 3.
        MOVE wa_lvbereich-oz TO itab_test-oz.
        MOVE wa_lvbereich-bez TO itab_test-bez.
      ENDIF.
    ENDLOOP.
ENDLOOP.
CLEAR wa_fieldcat.
wrk_pos = wrk_pos + 1.
wa_fieldcat-col_pos = wrk_pos.
wa_fieldcat-tabname = 'ITAB_TEST'.
wa_fieldcat-fieldname = 'oz'.
wa_fieldcat-seltext = 'Ordnungszahl'.
wa_fieldcat-emphasize = ''.
wa_fieldcat-hotspot = 'X'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wrk_pos = wrk_pos + 1.
wa_fieldcat-col_pos = wrk_pos.
wa_fieldcat-tabname = 'ITAB_TEST'.
wa_fieldcat-fieldname = 'bez'.
wa_fieldcat-seltext = 'Bezeichnung'.
wa_fieldcat-emphasize = ''.
wa_fieldcat-hotspot = ''.
APPEND wa_fieldcat TO it_fieldcat.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                   = ' '
I_CALLBACK_PROGRAM                = ' '
I_CALLBACK_PF_STATUS_SET          = ' '
I_CALLBACK_USER_COMMAND           = ' '
I_CALLBACK_TOP_OF_PAGE            = ' '
I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
I_BACKGROUND_ID                   = ' '
I_GRID_TITLE                      =
I_GRID_SETTINGS                   =
IS_LAYOUT                         =
     it_fieldcat                       = it_fieldcat
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
IT_SORT                           =
IT_FILTER                         =
IS_SEL_HIDE                       =
I_DEFAULT                         = 'X'
I_SAVE                            = ' '
IS_VARIANT                        =
IT_EVENTS                         =
IT_EVENT_EXIT                     =
IS_PRINT                          =
IS_REPREP_ID                      =
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
I_HTML_HEIGHT_TOP                 = 0
I_HTML_HEIGHT_END                 = 0
IT_ALV_GRAPHICS                   =
IT_HYPERLINK                      =
IT_ADD_FIELDCAT                   =
IT_EXCEPT_QINFO                   =
IR_SALV_FULLSCREEN_ADAPTER        =
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
    TABLES
      t_outtab                          = itab_test
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Hello,
Make the change like this
DATA: L_R_REPID LIKE SY-REPID.
L_R_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = L_R_REPID " CHeck here
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
* I_CALLBACK_PROGRAM = ' '
* I_CALLBACK_PF_STATUS_SET = ' '
* I_CALLBACK_USER_COMMAND = ' '
* I_CALLBACK_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_END_OF_LIST = ' '
* I_STRUCTURE_NAME =
* I_BACKGROUND_ID = ' '
* I_GRID_TITLE =
* I_GRID_SETTINGS =
* IS_LAYOUT =
it_fieldcat = it_fieldcat
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
* IT_SORT =
* IT_FILTER =
* IS_SEL_HIDE =
* I_DEFAULT = 'X'
* I_SAVE = ' '
* IS_VARIANT =
* IT_EVENTS =
* IT_EVENT_EXIT =
* IS_PRINT =
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* I_HTML_HEIGHT_TOP = 0
* I_HTML_HEIGHT_END = 0
* IT_ALV_GRAPHICS =
* IT_HYPERLINK =
* IT_ADD_FIELDCAT =
* IT_EXCEPT_QINFO =
* IR_SALV_FULLSCREEN_ADAPTER =
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = itab_test
* EXCEPTIONS
* PROGRAM_ERROR = 1
* OTHERS = 2
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
VAsanth

C2-01 Camera Problem - Displays Camera On Standby

Similar Messages

Maybe you are looking for