C2-01 how to switch off mobile data

I bought the C2-01 as a simple no-nonsense phone but it is driving me up the wall at the moment because I am unable to permanently disable it from accidentally using costly data  when fat figures hit the internet, OVI, facebook etc buttons.
I have checked out  other appropriate messages and have already tried the following.
handset is using the latest software
under connectivity- packet data conn. settings I have set it as 'when needed', although the fact that it does not have a 'never connect' or 'disable' option is a serious omission in my opinion.
under configuration I have set up all the relevant dummy personal configuration settings and dummy preferred access points as default settings.
In spite of this whenever I test the internet connection or Ovi applications, it still connects over the mobile data network using costly data.
Please help, there must be a way to permanently disable mobile data use.

@bigbruv
Presumably you have already seen this post and tried following it to the letter?
http://discussions.nokia.com/t5/Cseries/Disabling-internet-access-on-C2-01/m-p/1376541/highlight/tru...
Happy to have helped forum with a Support Ratio = 42.5

Similar Messages

  • How to switch off automatic creation of the business partner?

    Hello!
    Advise please why in erp after creation of the customer automatically form business partner? How to switch off automatic creation of the business partner? It very much disturbs, because business partner are created from crm. Because of automatic creation business partners are duplicated.

    Hi,
    I have made the following customizing settings to activate customer integration with business partner, but the problem is when I create a BP with a role (FI-Customer) the customer is not created automatically.
    1. Set BP Role Category for Direction BP to Customer
    Roles: FLCU00 - Business Partner FI Customer (FS: BP)
    FLCU01 - Business Partner Customer (FS: BP)
    2. Defined the Number assignment for Direction BP to customer
    4. Customer account group and numbering is also defined.
    3. Created a BP with BP Role FLCU00, I can see the Customer - General Data tab, but no customer was automatically generated by the system.
    Kindly let me know if any customizing I have missed.
    Regards
    Ameya

  • Does anybody no how to switch off automatic updates on the iphone 5.

    Does anybody no how to switch off automatic updates on the iphone 5 many thanks was1521 UK.

    The reason i asked about automatic updates was because my provider 02 told me about it they said turn it off or get something called a Bolt-on which would provide me with so much internet data at a set price so thanks for your reply Kilted Tim.

  • How to switch off screen blocking if I forget password and couldn't use iTunes?

    How to switch off screen blocking if I forget password and couldn't use iTunes?

    If you are saying that you've forgotten the passcode to unlock the iPad then you will need to connect the iPad to the computer that you normally sync to and you should then be able to reset the iPad and restore/re-sync your content to it (http://support.apple.com/kb/HT1212) - you may need to put the iPad into recovery mode for your iTunes to be able to reset it : http://support.apple.com/kb/ht1808
    If you do it via a different computer then :
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

  • How to switch off screen while playing songs in 5G iPod

    Any ideas how to switch off the screen completely (not just reducing the brightness) while playing the songs.
    i'm thinking that this could improve the battery life !!!
    30GB Video iPod   Windows XP Pro  

    No you can not do this; you can only turn off the Backlight.

  • How to switch off internal macbook screen when using external monitor(s)

    as far as i observed, adding external displays ( running different screens on them, not mirroring)  to a macbook pro  increases the gpu workload and with that comes temperature rise in the laptop and increase in ventilator noise - and probably increased hardware aging and risk of component faillure due to high temperature inside the laptop.
    simply try connecting two external 27" screens and open some flash video on both of them. then run a temperature monitoring software and watch temps rise, compared to running same flash videos / demanding tasks only on one connected external screen or only on the laptop screen with no external monitor connected.
    especially in mavericks, due to its increased background routines, such a set-up appears ever the more taxing, then again who does not love apple`s nice adds showing laptops with two 27” screens connected to it and the workspace vision they invoke....
    i have seen temps around 100° to 102° celsius on a 13" macbook pro 2012 edition, which i would expect is territory where the cpu / gpu temp safety switches will trigger system shutdown any time soon ( hardware status before verified as fully in order by apple service and default osx installation)
    imagine your anti-virus software starting some realtime content screening while runnign some demanding tasks already and the system shuts down easily (all such situation observed in reality)
    (would be interesting to see how a retina display macbook fares with 2 external monitors running demanding tasks, considering the retina display already increased taxing for the gpu - any experience from users of such a setup would be very much appreciated as it will provide critical purchase decision intelligence for all of us envisioning a retina-book and two big screens adoring our desks...)
    turning down the macbook`s built-in screen`s backlight may reduce power consumption but i have not seen any evidence that it switches off the gpu-to-screen feed and respective gpu load - it certainly did not prevent gpu, cpu, board, etc temps to rise to borderline levels.
    so the key question here is, how to switch off the macbook pro`s built-in screen in order to avoid gpu cycles being wasted on that screen ( and the resulting heat developments)  when working with big external screen(s)  connected to the laptop ?

    this thread talks about running several monitors as advertised by apple and running demanding task on them.
    with the lid open, the keyboard offers a very efficiant heat escape vector, which is blocked when the lid is closed - this is a basic and commonsense insulation effect.  this thread also mentions the use of temperature monitoring software and thus a repeatable test setup. the temps recorded were also mentioned. they rose when the lid was closed, the running task remaining unchanged. as far as i could track down the cpus in discussion will shut down around the 105 degree celsius range. i observed system shut downs when the system approached 103° celsius.  not to mention that the fans will run loud well before that.
    again this is on hardware checked and ok-ed by apple service.
    the question still welcoming an expert answer: is there any way to switch off the built-in macbook monitor while the lid is open ?

  • How to switch off scroll and zoom functions of touchpad on Satellite L

    Hi.
    Can anyone tell me how to switch off the scroll and zoom functions for the Synaptics Touchpad v7.2 .
    Can't seem to do it via the Control Panel.
    Any suggestions.

    Hi buddy,
    > Can't seem to do it via the Control Panel.
    You can only disable the virtual scrolling function if the touchpad driver is installed properly. The driver provides extended functions and allows you to disable/enable special features. If you dont have installed the touchpad driver download it on official Toshiba page:
    http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
    Then navigate to control panel as the previous user wrote for disabling the scroll function.
    Can you find it now?

  • How to switch off the pop-up message in rspcm

    Hi there,
    Does anyone know how to switch off the pop-up message in rspcm?
    The monitoring user shouldn't get the pop-up below anymore:
    „Statusänderung des Requests – Sollen Folge-Events ausgelöst werden?“
    The pop-up in english might be
    “status change of request - trigger subsequent processing?” or similar
    We would like to outsource the process chain monitoring (rspcm) to our operating.
    But operating shouldn't deal with the pop-up above and make decisions especially when delta infopackages are involved.
    Thanks for your help in advance.
    Regards,
    Wolfgang Smetana

    Elena,
    Is the subsequent process defined on success or failure ? if that is not defined - you might come across this message.....
    Arun

  • How to switch off  the  error sound  in Triversity

    Hi
    How to switch off the  error sound in Triversity, The audio of the computer is already in mute state. The problem is found with DELL pc and not with HP

    Mohammed,
    There is, actually, a better way to get rid of that annoying beep every time you get a policy prompt, error, etc.
    I have a Dell Vostro 1300 and I have done this in other Dell laptops with sucess. Perform the following:
    Go to Control Panel --> System --> (on the HARDWARE tab) Click on DEVICE MANAGER
    In DEVICE MANAGER, click on VIEW --> SHOW HIDDEN DEVICES
    Now, go to "NON-PLUG AND PLAY DRIVERS" and you will see "BEEP" listed as an active device. Right click on it and select "DISABLE" and then reboot your laptop.
    You should be golden right after the reboot.
    Hope this helped,
    Alfredo Carigga

  • How to switch off the Wireless Transmitting of the xDock for the iPod?

    Hey,
    Can anybody help me how to switch off the wireless streaming of the xDock transmitter for the iPod? I tried to do it by resetting and I already read the FAQ but nothing seemed to work...
    Thanks for your help. ;-)
    Hi,
    Kann mir irgendjemand sagen, wie ich bei meinem xDock Transmitter f?r den iPod das wireless streaming ausschalten kann? Ich habe bereits versucht das Ger?t zu resetten und habe das FAQ gelesen aber nichts hat geholfen...
    Vielen Dank im Vorraus f?r eure Hilfe ;-)

    turn it into standby mode
    unplug the power supply from the x-fi dock
    press the volume controller and hold it while plugging the power supply
    the link control led on the backside will glow shortly and and turn off
    thats it
    to reactivate it press both the forward and backward wind button for at least 3 seconds
    But I think, this is really a shame, that the WLAN network is unusable when using the x-Fi wireless function.

  • Satellite U500-1E0 - how to switch off the mouse 'clicking' noise

    Please can anyone tell me how to switch off the 'clicking' noise that the mouse buttons make when they're depressed?
    Thanks.

    Im not U500 owner but Ive got a U400 notebook model.
    As far as I know the touchpad buttons dont support any clicking sound which could be enabled or disabled by software.
    Therefore I would say its a mechanical noise which cannot be disabled.
    Bye

  • How to switch off my main screen (Imac 24") to use an external proyector?

    Please Help!
    How to switch off my main screen (Imac 24") to use an external proyector?
    It's not comfortable when you want to see a nice movie!
    Thanks
    Jack

    As I already said in my first reply post, you cannot turn off the iMac's display. The best you can do is display black, which many applications that have a +full screen+ mode will do, if the full screen mode is on the other display.
    Alternately, you can move the menu bar (along with Dock and disk icons) from the iMac's screen to the second display. This is done in System Preferences Displays pane Arrangement tab, by dragging the white bar in the diagram from one screen to the other. Once the menu bar and other features are on the second display, the only thing showing on the iMac's display should be the Desktop background. If you pick a Desktop background that is all black, your iMac's display will be showing a black screen (although it will still not be turned off).

  • DOM Parser Configuration...how to switch off DTD validation?

    Hi all,
    I am developing some implementation code in Java using JBuilder2005, in which DOM3 parser is also being utilised. Now the question is how to switch off DTD validation (seems its default mode is 'on') so that no validation will be carried out at all even DTD declaration statement is presented in an input XML document?
    Many thanks in advance
    Frank

    First of all, thank you so much for responding, DrClap. =)
    setValidating(false) of the DocumentBuilderFactory instance, factory, does not work as expected; it still stubbornly try to seek the external DTD file and fires 'IOException' error in case of no such a DTD.
    To follow up the EntityResolver approach, I searched online for almost the whole afternoon but still could not figure out how to do it exactly. In particular, I found http://www.jdom.org/docs/faq.html#a0350, which tells a way doing it, but I got 'StringBufferInputStream is deprecated' error. Then I changed to
    new InputStream(new ByteArrayInputStream("".getBytes()))adapted from http://forum.java.sun.com/thread.jspa?threadID=572919&messageID=2842185. But another error occurs: 'java.io.InputStream is abstract; cannot be instantiated'. Furthermore, I have looked at many docs(tutorials, APIs...) on parser configuration, usage of EntityResolver/setEntityResolver()...but they turned out not helpful. Could you please give out more details on how to do this using EntityResolver?? Many many thanks...

  • I have to turn off mobile data to connect to public wifi!?

    I have found with my phone that to connect to public wifi in places such as my local bar or where I work, that I have to turn off mobile data in settings to connect to the wifi.
    These are wifi hotspots where you have to create a free account to use them, and when you try to connect to them in wifi settings in iOS, when they connect, a little browser screen appears. If mobile data is turned off, then the broswer window will show a welcome screen or message saying connected (dpending on which spot Im connecting to), however if Data isn't turned off, the browser screen just does nothing or I get the apple.com screen with a small text message saying success, then disconnects me from the wifi!
    It wasn't so much an issue before because, in wifi settings for each hotspot I had options for auto-login and auto-join which allowed me not to have to keep reconnecting, however since updating to iOS6, these have changed and its been a nightmare since. This is because these spots tend to kick you off after 20-30mins and then you have to reconnect (which you can understand having to turn off mobile data everytime to do so is annoying).
    Ive noticed that my friends with other iphones, regardless of network, don't have to do this - so why is it an issue for me, or I was wondering if anybody else had the same problem or a fix/solution? And where did the auto-login option from the wifi settings go?

    After much googling for the past few hours, I think I finally found the answer to my problem. Apparently if you have the Onavo app along with the profile it installs, that interferes with connecting to Cisco based wifi hotspots, and the only way around it is the method I used above by turning off mobile data!
    https://getsatisfaction.com/onavo/topics/cant_connect_to_hotspot
    https://getsatisfaction.com/onavo/topics/onavo_prevents_from_being_able_to_conne ct_to_public_wifi_hotspots_that_have_terms_of_use_agreements
    I have uninstalled the app and profile, and will see if that fixes the issue tomorrow when Im at work

  • How to switch off web cam?

    Hello
    Does anybody know how to switch off web cam? It interferes me when I touch it with my mouse accidentally.
    Thanks

    Hi roxol,
    > It interferes me when I touch it with my mouse accidentally
    Im a little bit confused about this How you can touch it with the mouse?
    Furthermore your posting is not very detailed. I miss some important informations about your notebook and OS.
    At the moment I can only say that you should reinstall the webcam driver. The newest version you can find on the Toshiba website.

Maybe you are looking for

  • How do I get airdrop to correctly?

    I can't get airdrop to work

  • Using 2G iPhone as iPod: Upgraded to 2.1...iTunes will not mount phone??

    Here is the deal, I bought the original iPhone on Day 1. I then purchased an iPhone 3G on Day 1. I was using my first iPhone as an iPod touch. I upgraded my iPhone 3G to 2.1 with no problems. When I went to upgrade my iPhone 2G, everything seemed to

  • ThinkCentr​e 8910 won't bootup

    Hi, I have a 8910 AMF. I am trying to make it power on but it won't work so far. When I try to power it up I get an bios beeb error which is : short-short-short, 1 second delay, short-short-short, 1 second delay,  short-short-short, 1 second delay,  

  • How to change other Voice Over settings?

    I have a MacBook Pro retina (13 inch) and im getting REALLY irritated with my Voice Over settings. I want the thing to say the number name for nubers and not each individual digit. It says "one" and "zero" instead of "ten"!! How in the world do you e

  • [solved] How to avoid expanding variables with sed?

    Stupid question probably.. Say I have a script that uses the variable $HOME, and I want to replace it with /another/dir using sed I try something like.. sed -i "s_$HOME/file_/another/dir/file_g" script.sh but its a no go, I think sed expands $HOME to