C2-01: no reconnect incoming calls after 20sec
Hi everybody,
The incoming calls on my Nokia C2-01 are being reconnect after 20 sec. What do i have to do to change that? I don't want incoming calls to be reconnected and i think 20sec is real fast to reconnect a call, certainly when the phone is not that nearby.
Hope you can help.
Erick
Hi ,
Thanks for joining the Community.
Please get in touch with customer service and our technical team will be happy to help.
Click here for contact details.
Thanks
James
Similar Messages
-
Bluetooth no longer works for incoming calls after recent update
When I updated my Bluetooth to iOS 6, the Bluetooth no longer works for incoming calls. I press button to answer call, it makes a small cracking noise, and then sends the call to my phone. I can use the Bluetooth for outgoing calls and it works just fine. I was hoping when I updated to iOS 6.0.1 that the problem would be fixed. I have uninstalled and reinstalled Bluetooth but that has not helped either. I am frustrated. I have a LG HBM-905 Bluetooth that I loved prior to this problem.
Magically started working today after I synced.
Post relates to: Treo 700w (Verizon) -
Muting incoming call after latest 5.0.2 update
Hi! After updating my Z3C to Lollipop, I've noticed few drawbacks when it comes to smartband functionality. Despite (in my opinion) Sony bad decision of dropping their own Bluetooth unlock in favor of android smartlock, making using smartband for this extremely hard, I'm also quite irritated with how it handles incoming calls. Earlier I was able to shut the ringtone down by pressing the button on smrtband, now doing this results in phone switching to priority mode, but the ringtone is still playing. I'm not sure if this is happening from the latest update or since first lollipop software. Is someone experiencing the same behaviour? Maybe it is some update error. I'd be grateful if someone could check their devices!
Anyone facing the same problem? If someone could chceck please, i'll know then if it's only my device or not
-
Dropped Incoming calls after 20 seconds, Reason: Q.850;cause=86
I have the following scenario for incoming calls:
PSTN ---- E1 ---> Digium Gateway --- SIP ---> Router 2921 ------SIP ----> CUCM
All incoming calls from the PSTN get dropped after 20 seconds. All outgoing calls to the PSTN work fine..
The Router 2921 generates a BYE message with Reason: Q.850;cause=86 to the Digium Gateway.
Attached is the debug, show run and a packet capture with all the SIP messages..
If someone could please give me to a solution.
Thanks!Hello Carlos,
Here is the analysis of the traces....
Timestamp Node / Interface Device IP Direction Protocol Message Name TCP Handle / From Tag Call Ref / ID
05/09/2014 16:52:36.608 172.17.0.6 172.16.50.10 In SIP INVITE as12f8f5d4 [email protected]
05/09/2014 16:52:36.620 172.17.0.6 172.17.0.3 Out SIP INVITE A424AFA0-1D7B [email protected]
05/09/2014 16:52:36.620 172.17.0.6 172.16.50.10 Out SIP 100 Trying as12f8f5d4 [email protected]
05/09/2014 16:52:36.624 172.17.0.6 172.17.0.3 In SIP 100 Trying A424AFA0-1D7B [email protected]
05/09/2014 16:52:36.632 172.17.0.6 172.17.0.3 In SIP 180 Ringing A424AFA0-1D7B [email protected]
05/09/2014 16:52:36.632 172.17.0.6 172.16.50.10 Out SIP 180 Ringing as12f8f5d4 [email protected]
05/09/2014 16:52:39.140 172.17.0.6 172.17.0.3 In SIP 200 OK A424AFA0-1D7B [email protected]
05/09/2014 16:52:39.144 172.17.0.6 172.17.0.3 In SIP SUBSCRIBE 844851~97a97412-a383-4ad3-9458-162b2737f313-47291175 [email protected]
05/09/2014 16:52:39.148 172.17.0.6 172.17.0.3 Out SIP ACK A424AFA0-1D7B [email protected]
05/09/2014 16:52:39.148 172.17.0.6 172.17.0.3 Out SIP 200 OK 844851~97a97412-a383-4ad3-9458-162b2737f313-47291175 [email protected]
05/09/2014 16:52:39.148 172.17.0.6 172.17.0.3 Out SIP NOTIFY A424AFA0-1D7B [email protected]
05/09/2014 16:52:39.152 172.17.0.6 172.17.0.3 In SIP 200 OK A424AFA0-1D7B [email protected]
05/09/2014 16:52:39.152 172.17.0.6 172.16.50.10 Out SIP 200 OK as12f8f5d4 [email protected]
05/09/2014 16:52:39.652 172.17.0.6 172.16.50.10 Out SIP 200 OK as12f8f5d4 [email protected]
05/09/2014 16:52:40.652 172.17.0.6 172.16.50.10 Out SIP 200 OK as12f8f5d4 [email protected]
05/09/2014 16:52:42.652 172.17.0.6 172.16.50.10 Out SIP 200 OK as12f8f5d4 [email protected]
05/09/2014 16:52:46.652 172.17.0.6 172.16.50.10 Out SIP 200 OK as12f8f5d4 [email protected]
05/09/2014 16:52:50.652 172.17.0.6 172.16.50.10 Out SIP 200 OK as12f8f5d4 [email protected]
05/09/2014 16:52:54.652 172.17.0.6 172.16.50.10 Out SIP 200 OK as12f8f5d4 [email protected]
05/09/2014 16:52:58.652 172.17.0.6 172.17.0.6 Out SIP BYE A424AFAC-1EC1 [email protected]
05/09/2014 16:52:58.652 172.17.0.6 172.17.0.3 Out SIP BYE A424AFA0-1D7B [email protected]
The 200 Ok is not being acknowledged by the Digium Gateway . Hence the call is dropped .
Please check why the "Digium" side is not sending an ACK for this transaction.
Hope this helps!
Regards,
Karthik Sivaram -
N95 shut down and no incoming calls after using GP...
Dear forum, firstly I apologize if this has been addressed elsewhere. I bought a N95 for christmas and just recently bought a 3 yr license for the voice directed nav. My problem is that after using the GPS my phone refused to receive any incoming calls or allowed me to to make calls. Happens everytime I use the GPS function. It also shuts off automatically or tries to reset. It does this until I remove the battery and turn it back on. I should stress that this happens only after using GPS. Any ideas other than upgrading the firmware?
CheersHi robby_au2007
Does it make any difference if active connection is set to "never" rather than "as needed" in Nokia Maps Application > Options > Settings > Network?
If you hadn't purchased a 3yr license, I might have suggested installing the beta version of Nokia Maps 2.0 available from:
http://www.nokia.com/betalabs/maps
Happy to have helped forum in a small way with a Support Ratio = 37.0 -
Hi,
I have a few problems with my z10 STL100-2:
1. I don't hear the sound of incoming calls. (other notifications I do hear)
2. When I connect the device to blackberry link I receive a message in the bl. link that I need to disconnect the device from the computer and complete the defenition process in the device, whereas in the device it says that the definition was completed. Therefore I cannot connect to the bl. link.
I'd appreciate any help.
Thank you!welcome to the club. lots of post for exactly the same thing pluss more.
while we wait for a solution also check your callender and see if your alarm on that only rings for 2 seconds. -
Iphone 3GS keeps crashing and wont hang up after out & incoming calls after repairs
I have had my iphone 3GS back to vodafone after I could not make calls, kept saying call failed!. I did all the troubleshooting tips, was okay for a short time, then shortly started doing same thing.I took it back to the store and on that occasion the assistant took the phone out of the protective cover i always had it in to replace the simcard in case it was this that was causing the problem ,then he dropped it onto the shops wooden floor and it bounced, he picked it up & went bright red & kept apologising , I then said if I have any more problems with it then I will come back & see him & he said yes. Shortly after I noticed the sim cover on top of phone was missing but i could see the simcard inside, so I returned to the store & informed them of this, i was advised by the earlier assistant 'Craig' that he thought that the sim tray was underneath the simcard which he then removed the simcard, then advised me he didn't want to go poking about in it in case it was inside and he would send the phone to be repaired & gave me a replacement phone until mine was back. I waited approx 2 weeks before receiving a call from Vodafone saying they would repair it if I payed over £100! as it was not covered under my insurance, I informed them the assistant dropped the phone in store and then i noticed the problem & was then told they would investigate this and call back, 10 minutes later they called back to say it would be a free repair. Since the repair I have had nothing but trouble with the phone crashing when I access apps , sticking on the hangup screen with in & out going calls for approx 10 minutes or more, when I turn phone on the Apple logo stays on the screen for long periods off time. When I access my music the track will change part way through to another track & also sometimes refusing to charge. I am fed up with going back & forth to the store which is quite a distance from my home & the phone has more problems since it was ''dropped'' & then ''repaired'' & I am at a loss of what to do. I feel I have been treated unfairly and gone along with all Vodafone asked of me. Please could someone from Apple help me!!!
The steps you already took were the correct ones - reset, restore from backup, restore as new phone. You could always try them again, but a Restore with set up as new is the 'ulitmate' troubleshooter - if that doesn't correct the issue, it's usually time for a replacement phone. Unfortunately, you've learned a hard lesson there, although I don't see how Apple screwed you - it's no secret that the iPhone warranty is valid only in the country of original purchase (as a little research on your part would have shown).
See how much money you saved with your eBay purchase? Next time buy the phone from Apple or an authorized UK carrier. -
I can not see incoming calls after LOLLIPOP update
Hi. When i get a call i cannot see screen, who is calling. It is necessary when phone is locked. Colud you help me?
You may need to perform a software repair using PC Companion.The process will erase all internal memory.You might need to charge your device for about 1-2 hours before so the device has at least 60% battery.
Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device).
Open PC companion->support zone->phone/tablet software update->repair my phone/tablet blue highlighted.Follow the steps given,do not connect your phone until prompted to press volume down while plugging USB cable. If PC companion does not start the repair process, you might need to run it in compatibility mode with Windows 7 (in some cases XP).
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien -
How do I change my voice message to a personal message after the phone has been setup?
Start the Phone app
Tap Greeting in the upper left corner.
Tap Record to begin recording and speak your new message clearly
Then tap Save. -
Unable to view contact photos during incoming calls after 7.1 upgrade.
This was working fine up until the phone was upgraded on my 5s
Has any one else had the same problem, and if so do you know of a fix?Same thing has happened to my wifes phone, upgrading to 7.1 on her 5s.
-
Problems hearing an incoming caller after update to ios7
Since I upgraded to the original ios7 update I cannot hear when speaking or hear the other person when speaking directly from headset - it is very muffled. I can hear fine on bluetooth or with earphones - any advice
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
-
IPhone 5s is not receiving incoming calls
Hi everyone,
I am having problems with receiving incoming calls after I got the 5s. Sometimes, it didn't even ring, just went straight to voice mail even though the signal was strong. Sometimes they have to call me up to 8 - 10 times for the phone to ring once and the other calls will appear as missed calls. Does anyone experience the same problem with the 5s? Should I bring it to the apple store for them to take a look?
ThanksDouble check settings - do not disturb - off
-
My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.
Hello SamSax
Check out the assist page below for troubleshooting call connectivity.
Calls and connection issues
http://www.apple.com/support/iphone/assistant/calls/
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
IPhone 4 Can't receive incoming calls and sms after 3G has been activated
I can't receive incoming calls and sms on my iPhone 4 after the 3G connection has been activated and used actively by me. Outgoing calls and messages do work and as long as I use the Wi-Fi connection everything's fine but the problem appears after switching to 3G. Any help? Thx in advance!
I think the next step is to do a reset by holding the sleep and home buttons down at the same time until the Apple logo appears. If you haven't done this before, keep holding the buttons when the turn off slider appears. The screen will go black and after what seems like an eternity, actually several seconds, the Apple logo will appear. When the logo appears, release the buttons.
-
How do I get FaceTime for Mac to stop ringing after answering an incoming call on my iPhone?
I have iPhone Cellular Calls enabled for iPhone and FaceTime and am able to make and receive calls splendidly with FaceTime. However, when I answer an incoming call on my iPhone, FaceTime will not stop ringing. This is a significant, loud, annoying issue for me, my caller, and everyone in my house. It rings for eternity, long after the call has ended, until the call notification on my Mac is either accepted or declined. FaceTime needs to know when the call is answered on another device and stop ringing. Is there any solution for this?
This works for me:
To turn off Phone Calling on your iPad or iPod Touch, go to FaceTime under Settings and switch off iPhone Cellular Calls. On your Mac, open the FaceTime app, then go to Preferences under FaceTime, and tap Settings. From there, switch off the iPhone Cellular Calls option.
Found it here:http://www.pocket-lint.com/news/131449-why-s-my-mac-taking-my-iphone-calls-how-t o-turn-off-apple-continuity
I realise it doesn't quite solve the issue of FaceTime "knowing" whether the call has already been answered on another device, which I agree is a flaw. But in my case, I don't want to receive regular phone calls on my Mac at any time. Only the very rare FaceTime call. So turning off cellular calls is a solution of sorts.
Maybe you are looking for
-
I recently bought some songs from itunes, and I tried to sync my mac air laptop to my nano ipod, but it didn't work. I usually use my PC computer to do this, and my music is in the itunes library on my mac, it just won't sync to my ipod. When I tried
-
How can I execute Stored Procedures in PARALLEL and DYNAMICALLY ?
Hi I have a stored procedure. It can be executed like this exec test @p = 1; exec test @p = 2 exec test @p = n; n can be hundred. I want the sp being executed in parallel, not sequence. It means the 3 examples above can be run at the same time. If I
-
Can i use a wireless hard drive with an ipad
I am looking at buying a wireless Hard drive to store my movies on can I connect it to my Ipad?
-
Time Machine suddenly can't find network drive (WD MyBook)
I have a Mac Mini running OS X 10.5, with a 2 TB external USB drive (Western Digital MyBook) which my family uses for Time machine backups. It has worked fine for months. Suddenly, about 3 weeks ago but unnoticed until today, my wife's MacBook (OS X
-
Report to fetch the labour cost and material cost
Hi Gurus, The requirement is to create a report to fecth the actual cost from the maintenance order. ie.. material cost , labor cost and some other costs which are directly posted to the order. Can anybody let me know from which tables I can pull the