C2-12383-7 Error, Flower for PS Vita won't install

I purchased the digital version of "Journey Collector’s Edition", and I have been unable to install the PS Vita version of "Flower" that comes with this bundle.I have downloaded "Flower" multiple times and I keep receiving two error messages describing a problem with installing the game.The two error messages that are displayed after attempting to install the game are C2-12383-7 and C2-13270-3. All the other games in this Edition download and install just fine, but the PS Vita version of “Flower” does not install once it has been downloaded.I am now left with 474 MB of data on my PS Vita which I can’t use. Here is a screenshot of the game as it appears in my download list, along with a screenshot showing how the installation seems to fail at 15% of its progress, and some screenshots of all the information I could find on the PS Vita system relating to these two errors.

No the installation failed in exactly the same way. I rang PlayStation Support on the 12th and the advisor told me they would give me a refund.I asked them to tell me when they have fixed the problem so that I may purchase the item again. People who had experienced this particular error with other content still needed to get a refund.
Once the problem had been fixed they were told to purchase whatever content it was they were having problems with a second time.
I don't know what way PlayStation organise the content on their server/ servers, but perhaps when you buy content on the Store your account is linked with the hash value of the installer for the content.
If the content which has been bought is corrupt then it will have a different hash value.
In this situation the solution would require someone to get a refund so that they may purchse the content again.
The advisor told me they would escalate the problem to their technical team, but I don't think there is going to be a solution any time soon, as there don't appear to be many people experiencing this error with this particular content.
Also since this content has not been affected by this error before, I am affraid that this problem will take a lower priority.

Similar Messages

"Add-On Software" CD for LV6.1 won't install.

Following NI Forums Knight Dan Knutson's advice to install a LV version earlier than 8.5 in order to convert 40 VIs written in LV5.1 to LV8.5.1, I attempted to install LabVIEW 6.1. There is a CD that won't install. It is the "Add-On Software" LV6.1 CD. The CD does not autoinstall when it's put in the CD drive. When I right-click the Autorun > Install icon, the installer returns, "Error. Installation failed." The CD has LabVIEW, and Measurement Studio folders, an autorun setup information file and and Eagle icon. There is no setup.exe on the installation CD main directory. Could anyone please suggest how to install the LabVIEW and Measurement Studio folders?
I tried to go into the individual sub-folders of the "Add-On Software" CD, but when I reached LabVIEW\Enterprise\SPC\Install\disk1\ and click Setup.exe, I get "Setup Installation Error. Setup has detected that UnInstallShield is in use. Please close UnInstallShield and restart Setup. Error 432." Running MSCONFIG to remove isUninst.exe from the Startup folder fails because no IsUninst.exe application runs on startup, rebooting does not help, it's not an Administrator issue because my account already has Administrator privileges, and searching the Internet does not give useful clues.
Could an expert please solve either of these two problems?
Thanks,
BenCh01

Hello All,
I may be confused on the topic of a Compact RIO integrated with LabVIEW version 5.1? Version 5.1 pre-dates the release of Compact RIO hardware. The Compact RIO platform uses neither NI-DAQmx, nor the Traditional NI-DAQ driver, it is built on a separate driver platform in NI-RIO. May I inquire as to why version 8.5.1 was selected for the upgrade process, and not the latest version in 2009 SP1?
As you may have experienced already, the process of upgrading across 10 releases of the LabVIEW development environment may present issues, as the environment has been significantly changed through the years. For additional information on the upgrade process please see the following information:
How to Upgrade or Revert a VI to a Different Version of LabVIEW
http://zone.ni.com/devzone/cda/tut/p/id/8387
Upgrading to the Latest Version of LabVIEW
http://zone.ni.com/devzone/cda/tut/p/id/7417
More realistically, does this application contain highly customized code, or functions, that are not integrated into the newer platform? With regard to hardware integration, if you intend on working with the Compact RIO platform, you will be working to develop brand new code using the LabVIEW Real-Time (and possibly LabVIEW FPGA) Module, as any code written in LabVIEW 5.1 will not support the Compact RIO platform. With respect to any additional hardware that may have been used, you will need to verify the device support in either the NI-DAQmx or Traditional DAQ releases, this information can be found at http://www.ni.com/support. I believe time spent developing on a supported platform, for the new hardware set, may be more effective than looking to directly upgrade the 5.1 code.
Please post any additional questions you may have.
Patrick Corcoran
Application Engineering Specialist | Control
National Instruments

Numbers app for iPhone 4 won't install

I recently had to restore my iPhone 4 because it wasn't responding. I'm running iOS 7.1.2. It It seems to be working fine now, except the Numbers App won't install from my computer to my iPhone. I'm assuming it's because my iPhone is old and the app is new. How can I get an older version of the app for my phone?

Keeps saying the connection timed out and to check my connections but everything is working just fine. I was able to donwload the itunes update just fine so I know its nothing to do with my connections. I get an error msg when I try to do it OTA. Says it encountered and error and to check my settings. Cant restore the phone since it needs to download the update because it always gives that error message

I keep getting an error message, the flash player won't install, help?

I'am using internet explorer 8 and I followed all the trouble shooting steps in the support center but i keep getting this message:
"Error opening for file writing: C:\Windows\system32\Macromed\Flash\Flash10d.ocx".
The Pop up that allows it to download the file isn't coming up, but when i tried to download the Adobe air and it came up. I checked all the security settings in the Internet options and followed it but still the same. What could this mean? Thank you.

Try the following:
download the Flash Player uninstaller from http://kb2.adobe.com/cps/141/tn_14157.html (save to disk);
download the offline ActiveX installer http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe (save to disk);
close all browser windows, then run the downloaded uninstaller;
open Windows Explorer, then check that %WINDIR%\system32\Macromed\Flash is empty (or non-existant);
now run the downloaded installer
Message was edited by: ʇɐb ɹəuəllıʍ
(added forgotten links)

Windows Phone 8.1 (8.10.14147.180) Preview for Developers Update won't install: 0x80188308

I'm trying to install the Windows Phone 8.1 Preview for Devlopers but it won't install. I get x80188308. (I've tried 3 times)
My Phone info:
NOKIA Lumia 920
OS version 8.10.12400.899
Lumia Cyan
RM-820_nam_canada_200, core build 3051.50009.1424.10362

For help using Windows Phone please post in the Windows Phone forums on
http://answers.Microsoft.com

Paid for Beepus app, won't install, Can someone help please??

Hi,
I have a BB Curve 8520 and remember having Beepus when it first came out and it was free. After a while I deleted the app. A year or so later I want it back again and now it costs money. Ok fine thats no problem, so i paid the money for the app and it took me to my uninstalled folder in my app world and began re-installing it. However it keeps failing and I have no idea why and what to do about it.
This is the second time I have paid for an app now and it hasnt installed, i let the first one go but don't see why i should be paying for an app that won't install on my blackberry. It's been on there before, so I don't know what the problem is. Has anyone else had problems with this?
Does anyone have any suggestions or know how to fix this problem?
Any help would be greatly appreciated.
Many Thanks,
Lee
Solved!
Go to Solution.

Hi and Welcome to the Community!
I suggest that you clear the AppWorld application cache:
1. Open App World
2. Go to My World
3. Follow one (and only one!) of these steps:
3a. For keyboard-based BB's -- Hold down the ALT key and then press, in sequence R, then S, then T
3b. For Touch Screen Only BBs -- Hold the num-lock (!?123) button so it locks and then press, in sequence 3, then 4, then (
3c. For newer (e,g., OS6 and 7) BB's, see this KB:
KB24714 How to clear the BlackBerry App World cache
4. AppWorld should close.
5. If your BB locks after issuing the cache clear, perform a battery pull reboot
6. Return to AppWorld/MyWorld (it may be sluggish while it re-synchronizes).
If step (4) does not happen as listed, then the clear cache did not work.
Hopefully it'll work for you! Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Error: Software for ipod communication is not installed correctly? Help.

Right I had itunes open and I plugged my ipod (nano 2gb) in like usual and the above message appears and it also says that I should just re-install itunes for the ipod software but I've done this, I have the latest version of itunes. Can someone help me please? Thank you :]

I have the same problem. making me very crazy!
I dont want to have to re-install windows.
I have the latest version of itunes.
I tried all the things suggested, i.e. re-installed itunes after deleted all entries of everything to do with itunes, Quick time etc, checked the USB ports.
Is there a solution out there!!!!
help me someone please!!!!!

I got an "Apple mobile Device' failed to start error during installation and itunes won't install.

For some reason I got an error message trying to update itunes on my Vista PC and for some reason could not run itunes. I uninstalled itunes completely and tried to download a new installation. Near the end of the installation I got this error message. "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services." I was given the choices of 'cancel', 'retry', and 'abort'. I tried 'retry' and got the same error again. I tried 'abort' and the installation eventually ended in another error and suggested that I reinstall itunes. I was in the administrator's account when I attempted all these things.Has anyone had a similar problem or knows how to get the installation completed?? Thanks for any help.

Hello smittylin,
The following articles provides steps that can help get iTunes back up and running.
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
Allen

Updates for Illustrator CS5 won't install

Hi. I'm using Illustrator CS5 and I found a problem (a secondary problem here) with exporting PNG files (some weird white or black lines appear in the output), so I searched and learned that updating might help. I tried at first by going to Help > Updates... but it failed; then I downloaded the update manually and run it, but it failed too, with the error code U44M2P7.
I'm using Windows 7 Ultimate 64-bit.
Thanks in advance!

Also this is true for any of my / the kids apple products such as the ipod 2nd Gen Touch.

BlueScreen Error 9f and Windows Updates won't install

I just got my new T430 machine on Monday, but Windows 7 is already having issues - as of the first day!
When it goes into sleep mode it ends up shutting down instead, and I get a BlueScreen 9f error after I restart. When I try to install Windows Updates (I looked up this problem and I found information on the biometric fingerprint software causing problems - a problem that might be fixed with windows updates) it keeps failing. While it is trying to update, my computer shuts down.
It's brand new (it's actually a replacement for my last T430 that was having too many issues), and I'm worried. Any ideas what the issue could be? Is this something I just have to contact support for, or can I fix this myself? I've tried searching online for solutions, but no luck yet.
Greatly appreciate any help, thanks!

Hi, cberk
I did some research on the issue and found this document from Microsoft. It seems that this issue can be caused by an outdated BIOS and drivers. Due to this, I would recommend checking that all the drivers and the BIOS has been updated. It sounds like a few parts of your computer aren't communicating properly, which is most likely due to outdated drivers. The latest drivers for your system can be found here.
Hope it helps,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

AIO Software for Photosmart 2610 won't install on Windows 7

I've tried multiple times to install the latest AIO software for Windows 7 (Photosmart 2610) but it always crashes. I get a Fatal Error and MSI.netdevicemanager40. I tried the patch without success.

Hello racermike,
Please take a look at this document, and let me know if the troubleshooting steps help resolve your issue.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Adobe Reader for Palm OS won't install

When i try to install Adobe Reader for Palm OS from the disk that came with my new Palm T/X (or from the Adobe website) it acts like it's doing something but never actually installs. Help!!!

The Adobe Reader 305 for PalmOS setup file contains an older version of InstallShield's SETUP.EXE. For several reasons this setup version might hang without showing any GUI:
a. A running background application prevents the setup from continuing.
b. The TEMP-folder contains a lot of files and/or subdirectories.
ad a: Use the Windows Task manager to check how many background programs are running. You can temporarily prevent most startup-programs from running by holding both shift-keys immediately after logging into Windows XP.
ad b: Delete the files and folders from your TEMP folder(s). To locate your personal TEMP folder: Use the windows start menu -> click on: Run.. -> Enter: %TEMP% and press enter. Also check the %WINDIR%\TEMP folder. Some files might be in use during deletion, this can be ignored safely.
Reboot the computer after cleaning the TEMP folder(s), then try again running the setup program.
See also this article about older InstallShield SEUPs in general: http://community.installshield.com/showthread.php?t=96525

Multimedia Offerings for Think Center won't install

Hello,
When I try to install Multimedia Offerings for Think Center via Lenovo Update Manager I get the following Message:
"This program can only be used with recording hardware that is not attached to this computer."
P.S. DVD-RW device be part of my laptop
Solved!
Go to Solution.

Hello,
please take a look here.
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

Trouble downloading iphoto upgrade for yosemite. Won't go to installing

Having trouble downloading iphoto upgrade for yosemite. Won't install just keeps going back to the install button

Having trouble downloading iphoto upgrade for yosemite. Won't install just keeps going back to the install button

Inbound delivery - Error when creating document flow for delivery #########

Hello all:
When attempting to PGI an inbound delivery (via VL06I - For Goods receipt - select inbound delivery - click Post Goods Receipt) I received error messgae VL 659:
Diagnosis
As the system was recording the document flow for the goods movement, it determined that the subsequent document number is either blank or identical to the number of the preceding document.
System response
In order to avoid inconsistencies, the goods movement posting was cancelled.
All WMS transfer orders tied to this inbound delivery are complete. This hasn't happened with any other delivery. Any suggestions as to what I can do?
Thanks,
Bill

Hi,
I would suggest you to go trough OSS notes using the error message number as search key (e.g. 352243, 645119, 197864).
If you fail to find any maybe it would be worth of contacting SAP AG.
Regards,
Csaba

C2-12383-7 Error, Flower for PS Vita won't install

Similar Messages

Maybe you are looking for