C2 223 A valid bill of material could not be found for material 5089

Hi Experts
I have Production orders that use a phantom material 63955 with Std costing control.  This material uses three materials (5089,5233 & 5235) of moving average control.
Material 63955 is a HALB and uses all the numbers 5089,5233 and 5235 which are ROH.
With costing material 63955 with CK11N or CK40N, the error is
C2223 A valid bill of material could not be found for material 5089 and the same for 5233 and 5235
Diagnosis
Material 5233 is marked as a phantom assembly. When the system tried to explode a valid bill of material for material 5233, it could not find one.
System Response
The system generates a normal reservation for 5233.
Procedure
Check the bill of material for material 5233
The 5* numbers do not have a bill of material and are purchased externally.
What must I do now please?  These materials cannot be costed.
Kind regards
Dawn

Hi..
You  check whether material 5233 have procurement type ‘E’ or ‘X’ and
special procurement type ‘50’ in MRP2 view of Material master.
Material 5233 with the above conditions is Phantom assembly.
If Material 5233 is material master for external purchasing, Material 5233
should have procurement type ‘F’ and special procurement type  space.

Similar Messages

  • A valid bill of material could not be found for material

    Hi,
    Our's is SAP release 605. While doing sales order cost estimate (CK51N) we are getting following error message:
    A valid bill of material could not be found for material 1000000012
    Message no. C2223
    Diagnosis
    Material 1000000012 is marked as a phantom assembly. When the system tried to explode a valid bill of material for material 1000000012, it could not find one.
    System Response
    The system generates a normal reservation for 1000000012.
    Procedure
    Check the bill of material for material 1000000012.
    We have checked BOM and everything seems correct. please suggest where I am doing mistake.
    Regards,
    Bijay

    Dear Bijay kumar,
    Material 1000000012 is marked as a phantom assembly,so it must be set with a procurement Type E and special procurement
    type 50 in the MRP2 view of the material master or else at BOM level.So as a standard behaviour the system is expecting a
    BOM for the phantom assembly 1000000012.Check in T.Code CS03 whether you are able to find the BOM components for this
    material 1000000012.If BOM is not found means you have to create a BOM for this pahantom assembly because during the GI
    for the main assembly/product the system consumes the components of the pahantom assembly and not the phantom assembly
    (as in general there wont be any stock maintained for this material 1000000012).
    So check with this and revert back.
    Regards
    Mangalraj.S

  • Standard cost estimate could not be found for the material

    Dear All,
    We have 4 manufacturing plants and 30 sale depots. We are maintaining price control (S) for FG and SFG in Manufacturing plants,price control (V) at depots for the same material code. we are getting an error message " standard cost estimate could not be found for the material" while doing billing at depot.
    Please give me suggestion.
    Your suggestion should be appreciate.
    Thanks in advance............
    AND
    My client want to see profitability at manufacturing plant level and need break up for the COGM. So how can i get the values of depot sales.
    please let me know how to do........

    Hai
    Price control should be S for Depot also. You need to run standard cost estimate in DEPOT after entering additive cost under CK74N for frieght, excise duty etc. To transfer the standard cost from the source plant you  need to make configuration  in OMD9 defining the receiver and sender combination so that system can pick up the cost from source plant. This special produrement type needs to be asigned in the material masters of DEPOT under MRP 2 view.
    Pushkala

  • Can someone tell me how to fix this error in 10.4.11 on a G5 Quad Core 2.5GHz Tower...A valid video device could not be found for playback. [-70017]

    Can someone tell me how to fix this error in 10.4.11 on a G5 Quad Core 2.5GHz Tower...A valid video device could not be found for playback. [-70017]

    That's an error reported from DVD Player I believe...
    kDVDErrorMissingGraphicsDevice = -70017, // A valid graphics device is not available.
    There's some conjecture it has to do with HDCP, or Video Card problems, but the only 2 cures/fixes I found were Software related, one was cured by updating the OS, another by replacing the Video kexts.
    I think this error also shows up if trying to use DVD player in Safe Mode, (too much research isn't good! ).
    At the Apple Icon at top left>About this Mac.
    Then click on More Info>Hardware>Graphics/Displays and report like this...
    NVIDIA GeForce 7800GT:
      Chipset Model:          GeForce 7800GT
      Type:          Display
      Bus:          PCI
      Slot:          SLOT-1
      VRAM (Total):          256 MB
      Vendor:          nVIDIA (0x10de)
      Device ID:          0x0092
      Revision ID:          0x00a1
      ROM Revision:          2152.2
      Displays:
    VGA Display:
      Resolution:          1920 x 1080 @ 60 Hz
      Depth:          32-bit Color
      Core Image:          Supported
      Main Display:          Yes
      Mirror:          Off
      Online:          Yes
      Quartz Extreme:          Supported
    Display:
      Status:          No display connected
    Can't think of much to try at the moment, but perhaps reapplying the big 10.4.11 combo, Repair Permissions, & reboot would help, not sure.
    The combo update for PowerPC-based Macs...
    http://www.apple.com/support/downloads/macosx10411comboupdateppc.html

  • I can't get dvds to play "There was an initialization error. A valid video device could not be found for playback. [-70017]  Anybody know how to resolve this?

    I can't get dvds to play and, instead, get "There was an initialization error.  A valid video device could not be found for playback. [-70017]"  I went in for a Genius appt Friday and it played for the tech...but now I'm back home (one and a half hours from the store) and I'm getting the error message again when I try to load a dvd.  Any recommendations?

    Hello, try this...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    Reboot... any change?

  • Serial number you provided is valid, but a qualifying could not be found on this computer

    I want to install Encore from the Adobe CS6 Production Premium that I own but when I enter my password, it says "Serial number you provided is valid, but a qualifying could not be found on this computer". Another user had this problem but it was resolved privatly. How can I use my software?

    You are trying to install Production Premium CS6 upgrade version which is asking for previous version of this production.
    Fortunately you have the production premium CS5 full version also purchased & registered.
    You need to install that serial number ir resrespective of the fact whether it is installed on this system or not.
    You can get the serial number in your account of www.adobe.com.
    Regards
    Rajshree

  • Serial number you provided is valid but qualifying product could not be found on this machine

    I have a qualifying product but am getting " serial number you provided is valid but qualifying product could not be found on this machine" when installing on my new macbook air--help?

    ashlie,
    If needed:
    Here are Adobe pages for downloading CS6, CS5, and CS4:
    http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
    http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html
    http://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html
    Adobe has started setting up a general set of pages for downloading (even) older versions (requiring  a licence) here:
    https://helpx.adobe.com/download-install.html
    http://www.adobe.com/downloads/other-downloads.html
    Until (even) older versions are added, this thread made by staff about downloading the old stuff, with its reference to the Prodesign Tools page is recommended (the last link goes back to CS3):
    http://forums.adobe.com/message/5418120#5418120
    http://prodesigntools.com/tag/ddl
    It is crucial to follow all the initial steps precisely.

  • Sales price for  material could not be found?

    hi all,
    i have created a service(material) using material Type DIEN, then i have done standard P.O.(not with item category D)
    But when i do GR I am getting Sales price for  the material   could not be found?
    How to solve this?

    Hi,
    Kindly maintain sales view for the material in material master.
    regards
    suresh

  • Valid video device could not be found for playback (-70017)

    valid video device could not be found for playback (-70017)
    is th emessag eI get on two Dual 2gHz G5s.
    VLC Player plays th eDVDs jus fine...but APple DVD Player not.
    Anybody with a hint on this?
    TIA and regards
    Janne A.

    This is the DVD drive BTW:
    SONY DVD RW DW-U21A:
    Capacity: 7.33 GB
    Model: SONY DVD RW DW-U21A
    Revision: AADB
    Serial Number:
    Removable Media: Yes
    Detachable Drive: No
    BSD Name: disk2
    Protocol: ATAPI
    Unit Number: 0
    Socket Type: Internal
    OS9 Drivers: No
    S.M.A.R.T. status: Not Supported

  • Configuration could not be found for instance 000000000237355515

    Hi MM Gurus
    I have a PO with two line items and for 01 line item at the item level Material data tab,,when clicking on the "Configuration Tab" system is throwing the Error Message as "Configuration could not be found for instance 000000000237355515" Can any one suggests me what the Problem is and where the configuration data is maintained.
    Thanks in Advance
    Ganesh Kumar

    Hi,
    Did you solve this problem ? we are gettign this problem now, I am not sure how to solve this ?
    Pls share us if you have already solved this ?
    Thanks
    Gayathri

  • Error -Account 'Down-payments clearing account' could not be found for area

    When I am trying to pass a down payment entry by debiting vedor and crediting bank with asset it is giving an error as follows.
    Account 'Down-payments clearing account' could not be found for area 01
    Message no. AU133
    Please help me to rectify the same.
    Thanks in advance
    Deepak

    HI
    Please pay attention at  the possible causes of message AU133:
    1. Error AU133:
       a) You have not defined a contra account for acquisition value postings in the Asset Accounting Customizing settings (Transaction AO90).However, this is required as of Release 4.6C because, as is the case for all other integration postings in Asset Accounting, invoice receipt postings have to be displayed in Asset Accounting via the new posting kernel to ensure an identical document
    structure.
       b) You have defined the account in Asset Accounting, however, it is not created in the affected company code.Check whether the account is correct and create it for the company code, if necessary.
    2. You have entered an asset reconciliation account for the "Contra account: Acquisition value posting" (for example, the same account as for   "Acquisition:Acquis. and production costs" account).This is not  permitted.Check whether your account determination is correct               
       (Transaction AO90) in Asset Accounting Customizing. The same applies
       for the 'Contra account: Down payment posting'.
    3. As "Contra account: Acquisition value posting" you entered an asset G/L account. If necessary change the automatic posting indicator in the G/L account master record.
    4.Check if you need  revaluation accounts in depreciation areas involved   (AO90):
      -Revaluation acquis. and production costs
      -Offsetting account: Revaluation APC
    Please run also programm RACKONTO where missing or wrong customizing
    the accoutn determinations per company code is displayed
    Also have a look at note 7595 in this regard.
    Please assign points if it useful.
    Regards
    Ravinagh Boni

  • Acquisition:Acquis. and production costs' could not be found for area 01' in ABZON

    Hi  All
    I m getting one error 'Account 'Acquisition:Acquis. and production costs' could not be found for area 01' in ABZON. I know we have to maintain accounts using Tcode-AO85 but
    1) how to know the correct Account Determination.
    2) How to know the correct G/Ls to be maintained in AO85.
    Pls advice.
    Thnx in advance.
    Regards
    Pankaj

    Hi,
    In ABZON, if you are acquiring with existing asset then you cna have access to account determination / asset class from asset master. If you are also creating new asset then you will have access to asset class.
    In OAYZ, we assign account determination to asset class. and in AO85, we asign GL account to account determination.
    Hope this will help you.
    Thanks,

  • Account 'Special reserves balance' could not be found for area 03

    Hi Experts,
    I had an error message from fixed asset depreciation transaction (AFAB) like below.
    Account 'Special reserves balance' could not be found for area 03
    Message no. AU133
    Our depreciation areas are like following.
    1 : Book Area
    2 : Tax Area
    3 : Book Area - Tax Area
    51 : Investment Support Area
    The depreciation area information is like above, then I got an above error message.
    Please tell me where I have to assign above account at AO90 transaction.
    Thanks.
    BR,
    Chris Kim

    Hello Julie,
    Thanks for your reply.
    The depreciation area "03" is a derived area.
    I think the issue has been solved.
    Thanks again.
    BR,
    Chris

  • AU133 - Expense Account for Ord Depreciation could not be found for Area 58

    Hi
    I am working on ECC 6.0 Version. While running Depreciation AFAB in one our company codes, I am facing the Error No. AU133, Expense Account for Ord Depreciation could not be found for Area 58.
    Whereas there is no this error for our Book Depreciation Area 01.
    I have checked all the Accounting Assignments settings in AO90 and AO93. They are correctly maintained. I have no clues how to go about it.
    I have also checked whether the Depreciation and Acc. Dep GLs are maintained as recon account. But they are correct only.
    Please suggest any solution as we have to close the period.
    Gemini

    Same problem after upgrade from 4.6c.
    The solution was to create the depreciation accounts in the company code - kind of strange, since all depreciation postings must be made as cross-company postings to a cc that (obviously) has the account and since it worked in the old "RABUCH"- version. It seems to be ok to just create the accounts and then block them for posting (to avoid posting to them by mistake).

  • Account 'Cost elem. for settlmt AuC to CO objects' could not be found for

    Hi All,
    I am facing one error massage at the time of CWIP Asset settled in Cost centre
    Account 'Cost elem. for settlmt AuC to CO objects' could not be found for area 01
    Message no. AU133
    Which G/L Account (cost element) we have to assing there in Account determinati A090.
    What is empact this our G/L Account.
    Please help me to resolve this issue.
    Thanks & Regards,
    juhis

    Hi AP,
    Thanks for your reply,
    We find one element there assgin but that is not a G/L account what we do we can assgin that element in the Account determination in that asset account determination OR we have to create new G/L Account.
    When we create new G/L Account in which Account head we have to create and what is impact that g/l account in our Balance sheet account.
    Please help me ot understand that Process.
    Edited by: juhis022 on Mar 2, 2012 10:15 AM

Maybe you are looking for

  • Insert into date column using EJB3.0 and toplink not working

    Hi All, I'm getting the following error whenever I attempt to insert a date value into my Oracle database. [TopLink Fine]: 2006.08.08 05:53:21.973--UnitOfWork(14806807)--Connection(14714759)--Thread(Thread[RMICallHand ler-0,5,RequestThreadGroup])-- I

  • My app store is not working why?, my app store is not working why?

    hy            i want to now why i my itunes and app store is not working?and how can i send data from laptop to my iphone4?            one more thing is that why safari cannot download any thing from web?

  • Connection pool error in content server

    getting below error. resumed the suspended pool and tried restarting the content server... but, unable to get login page itself. Unable to load the user information. There are no connections available from pool for provider 'SystemDatabase'. Unable t

  • How to write into a file from an applet?

    Dear, I made an applet and I want to create a file in a machine. I tried many way but it not work. Here is the code: URL url = "http://hostname/filename.txt; URLConnection con = url.openConnection(); OutputStream out = con.getOutputStream(); out.writ

  • Gamers Unlocked still not active after a month.

    I purchased this membership in mid May 2015. I went to the store after receiving the card to get it activated. I was promised that was activated. I waited a couple days and noticed that it still wasn't active so I went directly to the retail store an