C22 M3 can't install vmware esxi

Hi,
I have cisco c22 m3s v02 rackmount server ,i want to install VMware vSphere ESXI but esxi doesn't find disk to install.I tried many custom cisco iso still same problem.
I have LSI mega raid and configuration is raid 1.I try to install win2012 r2 server ok and raid works fine.
Do i have to change raid controller or i miss esxi iso?
If i have to change raid controller which do you prefer? (raid1)
Can you help me please?
Best Regards

Hello Mesut, please review this document. Hope it might help.
http://www.cisco.com/en/US/docs/unified_computing/ucs/os-install-guides/vmware/CSERIES-VMWARE_chapter_01.html#reference_9858434220524A52A039038C9449D775
http://www.techrepublic.com/blog/smb-technologist/installing-vsphere-on-cisco-ucs-c-series-servers/
http://partnerweb.vmware.com/comp_guide1/detail.php?device_cat=server&device_id=21092

Similar Messages

  • VMWare ESXi and rebooting the system

    After installing VMWare ESXi and rebooting the system, the user experiences the following POST error:
          "Error 1962 No operating system found will reboot in 1 sec?"
    I have done the suggested solutuion as follows. but I have same problem after that too.
    http://support.lenovo.com/en_IN/detail.page?DocID=HT078920
    Someone can help me..... appreciate.....

    Fidelis,
    Thanks, so far. Mayby I should have been more direct !
    I this thread you wrote My solaris Disk is the secondary Slave.
    I the next thread you stated that you installed solaris on the secondary master.
    Have you made a mistake while writing 1 or 2
    or
    Have you changed your disk-configuration, and if so why ?
    Regards,
    Eric.
    PS How did you get that boot-manager going ?

  • Install VMware in Solaris sprac64bit

    I want to install Vmware or virtual box in Solaris Sprac 64 bit for version 5.10.
    Is it possible . Than how can i install Vmware or virtual box in Solaris machine .
    Edited by: king on Apr 17, 2012 3:27 AM

    Hi.
    It's not possible.
    You can check Hardware Compatibility List for VmWare or Virtual Box.
    Main reason - SPARC and x86 CPU is not binary compatibilty.
    Regards.

  • Can we install 6TB hard drive on these Dell PC's

    In a lab? Sure.
    For production use?

    We have the following Dell desktops:
     - Dell Optiplex 990 small form factor
     - Dell Optiplex 9090 mini tower desktop
    We wanted to get new hard drives for the above desktops.
    Would they take Western Digital 6TB internal SATA hard drives ?
    Will be using the above desktops for the following 2 purposes.
    1) Install windows 2012 storage essentials operating system
    2) Install VMWare ESXi 6.0 and use that 6TB as storage
    This topic first appeared in the Spiceworks Community

  • VCS installation on UCS C240 using VMWare ESXi 5.5

    Hello to everybody
    I have a trouble with installing Cisco UC products on UCS C240. I have VMWare ESXi 5.5. I'll write what I've done.
    At first I made Virtual Disk (Raid), but I couldn't enter Netbios configuration for a long time. I pressed CTRL+H and after that I saw screen with shell>. It was my first time I worked with UCS C240 and I didn't saw same screens during UCS C220 configuration. After that I entered exit command and Netbios screen appeared. After that I installed VMWare ESXi, configured it and installed VCS ova template. Everythung worked correct.
    BUT... After turning off and on the server VMWare ESXi didn't load, I looked to the console and saw the shell> screen. I think it isn't normal.
    What I have to do to load my VMWare and don't see the shell> screen.
    Thank you

    Can you check your boot order? And make sure your HDD/RAID comes above the EFI shell?

  • Can CUCM 8.5 version be installed on a DL 380 G5 server in Virtual environment (Vmware Esxi 4.0 or 4.1)? Or does it have to be only installed in UCS boxes for VMware?

    Can CUCM 8.5 version be installed on a DL 380 G5 server in Virtual environment (Vmware Esxi 4.0 or 4.1)? Or does it have to be only installed in UCS boxes for VMware?
    1. If the installation is possible for the Vmware instance on a DL 380 G5/G6 server , will that be supported by Cisco ?
    Similary is the case with CUIC 8.5. Has anybody worked on these do suggest ideas.

    Virtualized UC applications from Cisco are only supported on the UC on UCS platform using ESXi 4.0, 4.0 Update 1, or 4.1 - hypervisor support may vary based on application.
    Hailey
    Please rate helpful posts!
    Sent from Cisco Technical Support iPhone App

  • OEL V5.5 install Error in VMware ESXi V4

    Dear Sir,
    I had download OEL V5.5 x86_64 and try to install in VMware ESXi V4, when I run the install process I get error,
    the message is
    Code: 8b 72 40 48 8d 4c 24 1c 48 8b 7a 20 ba c4 01 00 00 e8 5f 77
    RIP [<ffffffff8008192f>] cpuid4_cache_lookup+0x256/0x356
    RSP <ffff810104737d60
    CR2: 0000000000000040
    <0>Kernel panic - not syncing: Fatal execption
    Please help me to check what is happen.
    THKs.
    Edward

    Best to file a support ticked with VMware about this; they can help you debug and fault isolate the problem. I suspect a CPU cache problem but that is purest speculation.

  • Can i use free VMWare ESXi for commercial use.?

    Hi,
    I know that this question have come up before but I can't find any
    definitive answers. Can i use free VMWare ESXi for commercial use. We
    would like to host
    several customers on a machine running  VMWare ESXi. I want a clear answer so we can do it without any further discussion.
    Thank you all in advance,
    LNN

    If you plan on renting out a VM, then you need to look at the hosting programs - http://www.vmware.com/solutions/hosting/index.html.   The base EULA for ESX and ESXi do not allow for the rental of VMs but I believe it may be possible to get an exemption to that.
    http://communities.vmware.com/message/1016993#1016993
    VMware grants you a nonexclusive, non-transferable license, without rights to sublicense, to  install or have installed a single instance of the Software and each Licensed Additional Module on a single Server, unless permitted to have multiple instances on a single Server or to have multiple instances on multiple Servers by the payment of applicable license fees (whether such fees are based on a per Processor, a per Virtual Machine, a per user or any other VMware approved licensing model); (ii) use the Software and each Licensed Additional Module solely for information processing and computing purposes, including the hosting of computer application-based services from a Virtual Machine and provision of such services via an internal or external network, provided such services may not consist of services to a third party that provide primarily computing or processing power (such as utility computing or grid computing) or any computer application-based service that is traded, rented, leased or sold on a Virtual Machine basis; and (iii) use and reproduce the VMware Virtual Infrastructure Client Software or VMware WebAccess (in object code form only) for the purposes of installation and operation on an unlimited number of your own internal computers or terminals solely for the purpose of accessing the Server on which the Software is installed.

  • Can I install both Snow Leopard and Windows 7 on the same version of VMWare 5?

    Even though I am running Apple OSX Mountain Lion 10.8.3 on my new 2013 iMac, I have just installed VMWare's "Fusion 5" so I can have Windows 7 installed on the "Fusion 5, for limited usage needs.
    I also would like to have a running version of Snow Leopard available to run my large collection of original Lynda.com training DVD's and CD's ... which unfortunately, now only allow the Lynda.com GUI player to operate in (and up to) Snow Leopard (at least this is what the Tech folks at Lynda.com have told me).
    Since Lynda.com is no longer producing any or their training programs on CD or DVD any longer, and because they have stopped supporting their training programs to run on Lion and above, I will have to have a version of Snow Leopard installed to run these training programs, and still be able to run them using the Lynda.com GUI player.
    So here's my dilemma:
    1.  Can I install both a version of Snow Leopard OS on my "VMWare "Fusion 5" .... along with a running version of Windows 7 on       the same "Fusion 5"?
    2.  Do I install only the Windows 7 on the VMWare, and find some other "device" to run a version of Snow Leopard off of?
    3.  Do I consider using "BootCamp", in conjunction with "Fusion 5", to get access to both Snow Leopard and Windows 7?
    Has anyone had any experience installing BOTH a previous (older) version of Apple OSX  ... AND ... a Windows OS version on one installed version of VMWare "Fusion"?
    OR
    Any suggestions on how to set up having access to both Snow Leopard and Windows 7 .... while keeping OS Mountain Lion as my main OS?

    mende1
    Thanks ... the "You have to purchase Snow Leopard Server" I knew about, and a few days ago I just ordered a copy from the Apple Store:
    Snow Leopard Server - Ordered at: 1-800-692-7753 ... OR ... 1-866-254-8313
    I asked for Apple Snow Leopard Server (Model MC588Z/A (SLSVR)
    "Unlimited Client License"
    It was around $25.50 (USD) with sales tax and shipping (NYS).
    One thing though ... when you mention:  "you should make two virtual machines".
    Not being too familiar with "Fusion 5" yet, Is setting up "two machine" all done under one installed version of "Fusion 5"?
    Would you have "links" to any "Fusion 5" installation instructions/info for setting up the
    "two machines" (one for Snow Leopard and one for Windows 7)?

  • Install CUCM 8.6 on VMWARE ESXi 5.0 Failed

    Dear All,
    I want to install CUCM 8.6 on Virtual Machine. I'm using VMWARE ESXi 5.0 version for the VM server.
    The installation CUCM 8.6 failed with error says:
    "the hardware you are using is not supported for this prodcut"
    I already disable LRO on the host ESXi 5.0, but still failed.
    is need to install the VMTOOLs before I install CUCM?
    CUCUM 8.6 support VMWARE Version ESXi 5.0?
    Thanks
    Regards,
    Krisna

    Actually for CUCM 8.5 and before it's RHEL 4, for CUCM 8.6 it's RHEL 5 (32 bit).
    I used the available OVA for my lab and it worked fine:
    1 vCPU
    2304 MB RAM
    80 GB HDD
    Not sure about compatibility with ESXi 5 and the VM machine v8 but above works for ESXi 4.1.
    If it still doesn't work, try using the same settings as you would in a ESXi 4.1 install.
    HTH
    java
    If this helps, please rate
    www.cisco.com/go/pdihelpdesk

  • Installing Inventory only agent on VMWare ESXi

    Hello,
    did anybody manage to install the Inventory-only-Agent (V 11.2.3) on a
    VMWare ESXi 5.1-Server? We would like to collect the inventory data for
    our CMDB. When i start the installation i get the follwoing errors:
    /tmp # ./zenumia-install.sh -s mycollectionserver
    Collection Server is mycollectionserver
    installing zenumia to /opt/novell/zenworks/umia
    ../zenumia-install.sh: line 188: arch: not found
    unrecognized OS, not setting SIPLATFORM
    OS tagged as unknown, sysinfo package is mcsysinfo-noui-10-.sh
    ../zenumia-install.sh: line 223: whoami: not found
    user is
    Must be root to install. Aborting install.
    So there are some needed commands like "whoami" missing and the OS ist
    unknown.
    I tried to collect the inventory data via a Discovery task, but the
    collected information is quite poor. No vendor-specific Hardware info, etc.
    Kind regards,
    Thomas

    Thomas,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • Can i install oracle express edition in VMware cloud

    Can i install oracle express edition in VMware cloud
    VMware are saying you need licence for using oracle in cloud
    but they are showing pricing for Enterprise edition 
    and i am clueless

    I've moved your question over to the Cloud Computing > Oracle Database Cloud Service space it I think it's likely the best place for it.  Certainly the community feedback and suggestions forum (not for product related questions) was NOT the correct place, as that forum is NOT for product related questions, as it states in it's forum space title.

  • I have Win 7 saved (installation file) in My MacBook Pro Licence version. How can i install it on MacBook Pro. After installation how can i make it to work with Parallel desktop or VMware fusion software.

    I have Win 7 saved (installation file) in My MacBook Pro Licence version. How can i install it on MacBook Pro. After installation how can i make it to work with Parallel desktop or VMware fusion software. I can buy these softwares.

    http://www.simplehelp.net/2009/02/02/how-to-install-windows-7-in-os-x-using-para llels-desktop-a-complete-walkthrough/
    http://blogs.parallels.com/consumertech/2011/10/24/install-windows-right-from-wi thin-parallels-desktop-7-guest.html

  • Installing CUEAC on VMware ESXi

    we have two UCS C210 M2 machines
    running CUCM in cluster (1 pub 1 sub) and Unity in cluster , and one  is running CUPS as well .
    i  would like to install CUEAC on a VM i would create on one of the machines
    some questions:
    1. is it OK to  install CUEAC on same ( physical)  machine as CUCM?
    2. in the CUEAC  admin guide there is only a reference to "Cisco Unified Attendant Server is only supported in a live environment on VMware ESXi 4.0 running
    on Cisco UCS B200M1 hardware" is this info up to date ?.
    any other advice would be usefull
    thanks

    No it is not, attendant console 9.0 is Windows based just like previous versions, see the data sheet:
    http://www.cisco.com/en/US/partner/prod/collateral/voicesw/ps6789/ps7046/ps7282/data_sheet_c78-520987.html
    HTH,
    Chris

  • Can I install Oracle VM server on VMware Workstation 7 with linux?

    I have installed VMware Workstation 7 on my laptop that already has windows 7 operating system.
    Next I installed Oracle Enterprise Linux 4 on my VMware Workstation 7.
    Now am planing to setup a RAC environment.
    What should be my next step? The documentation says I need to install VMware server.
    Are VMware server and Oracle VM server the same?
    can we replace one with other.
    I am a newbie.. Please spare my questions.

    hi,
    your vm ware server is ok.. but you should install same o/s for RAC..
    remove the linux and install windows and try RAC node in vmware..
    or try install linux
    check the link
    http://www.oracle-base.com/articles/10g/OracleDB10gR2RACInstallationOnCentos4UsingVMware.php
    for window 2003
    http://www.oracle-base.com/articles/10g/OracleDB10gR2RACInstallationOnWindows2003UsingVMware.php
    regards,
    Deepak

Maybe you are looking for