C260 driver error. intel(r)pentium(r)processor n- and j-series/intel ehci usb -0f34

Hi, Ive just vbought my C260 all in one and soon after buying it shopw me a driver error. This shows when looking in devicers and when the lenovo solotion center runs. I have tried to rest and refresh windows but still get this error. I try to fix this issue but all it says is error not fixed. It also shows the driver as disabled on the solution centre. Can anyone help with this problem? Many thanks

Hello I have the same problem as described on here. I telephoned the UK support line who told me that he had never come across the problem before and e mailed me a list of drivers for the machine. I e mailed them including a series of screenshots to illustrate the problem and had this reply. Thank you for contacting us.
In regards to your recent email this is an incorrect error message as it relate to the processor, your processor does not rely on drivers. Uninstall the driver from device manager and the error message should stop however it may reinstall itself when restarted. This error message will not make the computer defective in anyway.
If you require any further assistance then please do not hesitate to contact us.
Kind Regards
Sean I have e mailed a reply Hello Sean I note your reply. This doesn't not however fill me with confidence. There is an error. If the computer is showing an error message which is not correct then this is in itself an error. If it cannot be corrected because uninstalling the driver will only mean it will re install itself on next start up (or presumably by means of windows update) then again that is in itself an error. How will I be able to continue to use the computer with confidence knowing that any error message I receive may or may not be in fact an error . There needs to be a solution to this regards I am still waiting to hear back

Similar Messages

Satellite T130-02F - Display Driver Error

Hi There,
I just purchased the Satellite T130-02F and after choosing 32bit running system I had the power connected to charge battery up and then started to get "display driver errors" where the screen would flash black and then flash back on. I've checked device manager and driver details, the drive is upto date and as far as I can see is the correct driver. I've searched sites to see if there ar other drivers out there, but its up to date.
I haven't installed anything extra on the computer yet and find I get the error more regularly on the battery rather than power which concerns me. The computer is less than 24hrs old.
Any advice?
Mobile Intel (R) display chip set.
Windows 7 installed 32bit.

Hi
In your case I would try reinstalling the display driver. You can find the latest version on the Toshiba website:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
After this make sure that the newest BIOS version is installed. You can download it on the Toshiba website too.
If nothing works your only chance is an authorized service provider. It seems to be a hardware problem and must be checked from professional people.
Greets

Intel(R) Atom(TM)/Celeron(R)/Pentium(R) Processor need driver for Windows 10

After upgrade to Windows 10. This device drive does not work. I went to the HP driver download site and down loaded and installed < Intel Trusted Execution Engine Interface (TXE) Driver for the supported notebook models running a supported operating system. The Intel Trusted Execution Engine Interface enables the Secure Boot and provides services required for platform security features such as Intel Platform Trust Technology (Intel PPT). File name: sp69602.exe
Release details
Released: Nov 21, 2014
Version 1.20 Rev.A > However it still does not work. Need Windows 10 , 64bit Driver. HP "sp69602.exe" Driver package does not work. Product Name: HP 15-R011DX
Operating System: Microsoft Windows 10 pro (64-bit)
Dear Sir,
In my HP notebook pc in Device manager,, other devices need to insatall a driver,, that hardware id is :
ACPI\VEN_INT&DEV_33BD&REV_0002
ACPI\VEN_INT&DEV_33BD
ACPI\INT33BD
*INT33BD
i think that devices is Intel(R) Atom(TM)/Celeron(R)/Pentium(R) Processor MBI Device - 33BD and Intel(R) Atom(TM)/Celeron(R)/Pentium(R) Processor Trusted Execution Engine Interface.
but how to download and install this drivers.. please give a download link to install these drivers..
Thanks..

Hi ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues, with help from the community!
I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP 15-r011dx Notebook and issues with the Intel(R) Atom(TM)/Celeron(R)/Pentium(R) Processor MBI Device driver.
Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating. To install Microsoft.NET Framework 3.5, you have to go to the control panel>programs>turn Windows Features on/off and check the box to install Microsoft.NET Framework 3.5 which is not automatically included in Windows 8.1. What happens if you right click on the driver and select update? Have you also tried to rollback the driver? Please let me know. Thanks.

Is Intel Pentium T4300 a member of Pentium-M processors?

Sorry for the lame question but I am reading for the linux-ck kernels and in their repo there is ck-pentm package which they claim to be optimized for the Pentium-M processors which are for notebooks. Since I have a notebook and a pentium processor is it a pentium-M?
My processor is Pentium(R) Dual-Core CPU T4300 @ 2.10GHz <- this is from /proc/cpuinfo

There's nothing like http://ark.intel.com/products/37253/Int … 0-MHz-FSB) in http://en.wikipedia.org/wiki/List_of_In … processors - just look at the TDP difference.

Cpufreq drivers error on a pentium-m 1.73GHz (dothan)

Hi there.
Actually I am using the arch's default kernel (2.6.31) from the core repo and I am using a pentium-m processor.
I cannot load the speedstep-centrino module or even acpi-cpufreq module.
~ $ sudo modprobe speedstep-centrino
FATAL: Module speedstep_centrino not found.
~ $ sudo modprobe acpi-cpufreq
FATAL: Error inserting acpi_cpufreq (/lib/modules/2.6.31-ARCH/kernel/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.ko): No such device
$ uname -a
Linux supernova 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009 i686 Intel(R) Pentium(R) M processor 1.73GHz GenuineIntel GNU/Linux
So what I am using in the pentium-m is the driver (module) p4-clockmod, but I cannot get more processor speed than 600MHz (its a 1.73GHz) - I did the configs and even forced cpufreq to a given clock frequency but it does not work for more than 600MHz.
translating cpufreq-info output to english (using googles translator) this is the output
~ $ cpufreq-info
cpufrequtils 006: cpufreq-info (C) Dominik Brodowski 2004-2009
Report errors and bugs to [email protected], please.
analyzing CPU 0:
driver: p4-clockmod
CPUs that run at the same frequency hardware: 0
CPUs need to have their frequencies coordinated by software: 0
larger transition latency: 10.00 ms.
hardware limits: 75.0 MHz - 600 MHz
frequency levels available: 75.0 MHz, 150 MHz, 225 MHz, 300 MHz, 375 MHz, 450 MHz, 525 MHz, 600 MHz
regulators available cpufreq: userspace, powersave, ondemand, performance
policy current frequency should be between 75.0 MHz and 600 MHz
The governor "performance" must decide which speed to use
within that limit.
current CPU frequency is 600 MHz
also
~ $ cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 13
model name : Intel(R) Pentium(R) M processor 1.73GHz
stepping : 8
cpu MHz : 600.000
cache size : 2048 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss tm pbe nx up bts est tm2
bogomips : 1600.50
clflush size : 64
power management:
there is a bug report about this topic here: http://bugs.archlinux.org/task/17107
I'm trying to recompile the kernel with some options related to the cpu scaling capability.
also I have patched the file '/linux-2.6.31/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c' (from the kernel package)
with a more recent speedstep-centrino.c which can be found as an attachment in one of the latest replies in the bugtracker
Last edited by quarkup (2010-04-12 22:48:01)

No I have not hardcoded the patch.
The patch itself has been posted by an arch member.
You should check the bug tracker here: http://bugs.archlinux.org/task/17107
When I was looking about the error (the speedstep-centrino module was not being loaded correctly) i found some topics about this issue in bugtrackers of gentoo and the ubuntu's launchpad.
I had access to various kernel archives about it and the user "toorlv" told about the patch.
You probably are confusing the model of the processor (the 715) with the number of frequencies.
http://en.wikipedia.org/wiki/List_of_In … processors
http://en.wikipedia.org/wiki/Pentium_M
for example, I am using a Pentium M 740 1.73 GHz
the "cpufreq-info" tells me that actually the supported frequencies are "798 MHz, 1.06 GHz, 1.33 GHz, 1.73 GHz" (notice the max is of 1.73GHz)
and
$ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies
798000 1064000 1330000 1729000
and I am not using the default arch kernel (in the repos)
as you can see my kernel is the one i built.
$ uname -a
Linux supernova 2.6.32-pentium-m #1 ZEN SMP PREEMPT Sat Jan 23 18:08:45 WET 2010 i686 Intel(R) Pentium(R) M processor 1.73GHz GenuineIntel GNU/Linux
notice that the kernel26-pentium-m "includes the module" into the kernel so its not loadable with modprobe. it just works without modprobe.
Last edited by quarkup (2010-03-05 19:05:30)

I uploaded last release of CC (05/28/2014) but it did a mess on the entire pc: when I launched Photoshop it appeared a driver error on my graphic hardware; internet stopped to work and photoshop itself didn't respond.

Hi, this morning I installed last upgrade of CC (05/28/2014) but it did a mess on the entire pc: when I launched Photoshop it appeared a driver error on my graphic hardware (I checked, everything was up to date nd correctly working) and Photoshop didn't respond; internet stopped to work too.
The only way was to uninstall The CC App and create a restore point after uninstalling (It wasn't possible restore a previous one BEFORE the upgrade of this morning....)
My Processor is Intel(R) Core(TM) i7-4500U CPU @ GHz 2.40 GHz
RAM is 8GB
What do I have to do?
Reinstall it without upgrading it?
I would really appreciate that upgrades would be tested before being released.... -_-

Moving this discussion to the Photoshop General Discussion forum.

About display driver error report

My operating system is windows 07. I have pentium 4 intel prosessor and motherboard is p pavilion 06 asteron. when i'm working the display shut for a moment and displays the display driver error report that "display driver stopped responding, has been solved". the display driver is ATI RADEON EXPRESS 200 series. if the matter with display driver how can i get proper one.

Hi again dasuncj,
Thank you for the quick reply!
So that I can better diagnose the error message with your specific brand of HP Pavilion 06, I will need to know both the model and product number. This can be found by using this video below:
Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
Cheers!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Hard Drive errors after update attempt

I have a Macbook with Mac OSX 10.5.7. 2.2 GHz Intel core duo 2GB 667MHz DDR2 SDRAM Western Digital 320GB Hard drive
I attempted updating to the newest version and the computer froze part way through. When I tried to restart I got the daisy wheel running on the grey screen, but would not go further. So i put in the Install Disc, and hit power button and shift key. I got as far as Installer, but when I got the window that asked where to install the OS, there were no choices in the window.
I then removed the disc and tried to boot up, which it did. All the data is there, but I did lose my desktop customization. All applications launch OK (I have tried about a third) except Safari. Safari will not launch.
Based on another post in the forum, i went to Disk Utility and tried to Repair the disk. It failed due to a "Invalid Node Structure". So I tried to Repair Disk Permissions (also based on a forum post). That ran OK, but now the Repair Disk button is grayed out. And when I try to Verify Disk, I get the following:
SMART Status is verified, Partition Map Scheme is GUID.
In the History Window:
Performing Live Verification
Checking Journaled HFS Plus volume
Checking Extents Overflow file
Checking Catalog file
(the next three lines are in red letters)
Invalid Node Structure
The volume MacHD needs to be repaired
Error: Filesystem verify or repair failed
I have also found that there is no longer an administrator for the computer. It is actually my daughter's, and both she and I have (used to have) administrator privileges. Now in Accounts we are both listed as Standard users. I tried to update software. When asked to give my password, it said I was not an administrator (Using the correct password). Neither would my daughter's password work. The laptop does not think we are administrators.
So now the computer is running, and all data is still on it. But I cannot launch Safari. And I cannot update software (as there is no administrator).
(I have seen some posts suggesting third party software which may fix my disk. But they cost $100 and I can buy a new hard drive for 60 to 80.)
Has anyone a clue as to what went wrong? More important- does anyone know how to fix it??
Many thanks in advance.
Mark

After I erase the hard drive (I assume one pass of writing zeros is good enough, 7 passes not needed?) do I turn off the laptop, then turn on and insert the Install Disk? Will there be a prompt telling me when to put in the disk? Or do I put in the disc right after erasing?
One pass is fine. If you've previously backed up your hard drive to an external hard drive using SuperDuper!, which is what I use and recommend, or another program, if it created a bootable drive, you want to boot off of it, bring up SuperDuper! and copy the drive back to the internal hard drive. SuperDuper also makes the drive bootable. When done, reboot, and you should be all set. If you're using Time Machine, you'll want to install the operating system, then restore the Time Machine backup. SuperDuper! is available from http://www.shirt-pocket.com/superduper/superduperdescription.html
Finally- should I update the OS? Is there a problem with the newest update that caused this crash, or was it just a spurious glitch/bad luck?
I've been running 10.5.8 for awhile with no issues, and would recommend moving to it.

How do I fix Hard drive errors on my macbook pro?

I ran the etrecheck software on my Macbook Pro and it produced the following results. It says there are 15 errors with the hard drive and I was wondering how I can figure out what they are and possibly find a solution to get rid of them. I have used the disk utility to verify and repair permissions and to verify the disk and the only issue i get during that is this warning during verifying permissions:
Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired.
I also should mention my computer has been running slower than normal lately.
Another point is that there is a user launch agent that fails and I was wondering if I need it and how I can fix or get rid of it.
If anyone could help me out or point me in the right direction, I would greatly appreciate it.
Thank you,
Joe
EtreCheck version: 2.1.8 (121)
Report generated March 23, 2015 at 12:28:35 AM EDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (15-inch, Mid 2010) (Technical Specifications)
    MacBook Pro - model: MacBookPro6,2
    1 2.4 GHz Intel Core i5 CPU: 2-core
    8 GB RAM Upgradeable
        BANK 0/DIMM0
            4 GB DDR3 1067 MHz ok
        BANK 1/DIMM0
            4 GB DDR3 1067 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 49
Video Information: ℹ️
    Intel HD Graphics - VRAM: 288 MB
    NVIDIA GeForce GT 330M - VRAM: 256 MB
        Color LCD 1440 x 900
        FPD1730 1280 x 1024 @ 60 Hz
System Software: ℹ️
    OS X 10.10.2 (14C1514) - Time since boot: 0:15:46
Disk Information: ℹ️
    TOSHIBA MK3255GSXF disk0 : (320.07 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
       Macintosh HD (disk1) / : 318.84 GB (105.13 GB free) - 15 errors
            Core Storage: disk0s2 319.21 GB Online
    MATSHITADVD-R   UJ-898
USB Information: ℹ️
    Western Digital My Passport 07A8 1 TB
        EFI (disk2s1) <not mounted> : 210 MB
        My Passport for Mac (disk2s2) /Volumes/My Passport for Mac : 999.83 GB (238.82 GB free)
    Apple Internal Memory Card Reader
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Computer, Inc. IR Receiver
    Apple Inc. Built-in iSight
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Applications/VMware Fusion.app
    [not loaded]    com.vmware.kext.vmci (90.6.3) [Click for support]
    [not loaded]    com.vmware.kext.vmioplug.14.1.3 (14.1.3) [Click for support]
    [not loaded]    com.vmware.kext.vmnet (0231.47.74) [Click for support]
    [not loaded]    com.vmware.kext.vmx86 (0231.47.74) [Click for support]
    [not loaded]    com.vmware.kext.vsockets (90.6.0) [Click for support]
        /Library/Extensions
    [loaded]    org.virtualbox.kext.VBoxDrv (4.1.20) [Click for support]
    [not loaded]    org.virtualbox.kext.VBoxNetAdp (4.1.20) [Click for support]
    [not loaded]    org.virtualbox.kext.VBoxNetFlt (4.1.20) [Click for support]
    [loaded]    org.virtualbox.kext.VBoxUSB (4.1.20) [Click for support]
        /System/Library/Extensions
    [not loaded]    com.FTDI.driver.FTDIUSBSerialDriver (2.2.18 - SDK 10.6) [Click for support]
    [not loaded]    com.ni.driver.NiViPciK (5.4.0) [Click for support]
    [not loaded]    com.ni.driver.ni488k (3.0.0f1) [Click for support]
    [not loaded]    com.ni.driver.ni488lock (3.0.0f1) [Click for support]
    [loaded]    com.ni.driver.nipalk (2.9.1) [Click for support]
Launch Agents: ℹ️
    [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
    [running]    com.pharos.notify.plist [Click for support]
    [running]    com.pharos.popup.plist [Click for support]
    [running]    com.sony.PMBPortable.AutoRun.plist [Click for support]
    [loaded]    org.macosforge.xquartz.startx.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.cloudpath.maccmd.plist [Click for support]
    [loaded]    com.github.GitHub.GHInstallCLI.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [running]    com.ni.ServiceLocator.plist [Click for support]
    [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
    [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
    [running]    nilxid.plist [Click for support]
    [loaded]    org.macosforge.xquartz.privileged_startx.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
   [failed]    com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist [Click for details]
    [loaded]    com.facebook.videochat.[redacted].plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    com.spotify.webhelper.plist [Click for support]
    [not loaded]    org.virtualbox.vboxwebsrv.plist [Click for support]
User Login Items: ℹ️
    Stickies    Application (/Applications/Stickies.app)
    BetterTouchTool (373)    Application (/Applications/BetterTouchTool (373).app)
Internet Plug-ins: ℹ️
    MeetingJoinPlugin: Version: Unknown - SDK 10.6 [Click for support]
    DirectorShockwave: Version: 12.0.0r112 - SDK 10.6 [Click for support]
    LV110HelperLauncher: Version: 11.0.0 [Click for support]
    Unity Web Player: Version: UnityPlayer version 4.5.0f6 - SDK 10.6 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    LV130HelperLauncher: Version: 13.0.0 [Click for support]
    AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
    FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
    Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    iPhotoPhotocast: Version: 7.0 - SDK 10.7
    QuickTime Plugin: Version: 7.7.3
    SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
    AdobePDFViewer: Version: 10.1.13 [Click for support]
    LV85HelperLauncher: Version: 1.0 [Click for support]
    JavaAppletPlugin: Version: Java 8 Update 31 Check version
User internet Plug-ins: ℹ️
    WebEx64: Version: 1.0 - SDK 10.6 [Click for support]
Safari Extensions: ℹ️
    Adblock Plus
Audio Plug-ins: ℹ️
    Digital Power Station: Version: Unknown [Click for support]
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Java [Click for support]
    TeXDistPrefPane [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Mobile backups: OFF
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 318.84 GB Disk used: 213.71 GB
    Destinations:
        My Passport for Mac [Local]
        Total size: 999.83 GB
        Total number of backups: 7
        Oldest backup: 2014-02-21 08:44:36 +0000
        Last backup: 2015-02-24 08:37:32 +0000
        Size of backup disk: Excellent
            Backup size 999.83 GB > (Disk size 318.84 GB X 3)
Top Processes by CPU: ℹ️
         2%    WindowServer
         1%    helpd
         1%    mds_stores
         1%    firefox
         0%    launchd
Top Processes by Memory: ℹ️
    507 MB    firefox
    378 MB    mds_stores
    69 MB    ocspd
    69 MB    Spotlight
    60 MB    mds
Virtual Memory Information: ℹ️
    4.29 GB    Free RAM
    2.27 GB    Active RAM
    876 MB    Inactive RAM
    1.15 GB    Wired RAM
    1.79 GB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Mar 23, 2015, 12:06:28 AM    Self test - passed

Backup your computer. You may have to replace the HD.
Try repairing disk.
Repair Disk
Steps 1 through 7
http://support.apple.com/kb/PH5836

IBook hard drive errors

My brother's iBook G4 12" started freezing randomly, and when I tried to run disk utility it would give me lots and lots of errors. Apple Hardware Test spit some errors which I don't remember (unfortunately), and then the hard drive stopped showing up at all.
I bought a new 80G disk, and after swapping them, got about 90% into the Tiger install when it locked up completely. After forcing a reboot, the hard drive isn't recognized once again. Apple Hardware Test is giving "2STF/4/3: ATA- 100 ATA- 6 - Master".
Does this point more towards the ATA controller dying or did I somehow just get a lemon drive?
I have an external enclosure but it's either broken or a piece of junk, because -every- drive I've ever used in it has acted funny. It'll lock up the computer trying to read files and whatnot. I wouldn't trust it to give me an accurate result.
If anyone has any tips I'd appreciate it, as my brother needs his computer pretty bad and I don't really know where to go from here.
thanks,
Isaac

That's what I'm leaning towards. I'm going to have both drives tested by a friend and I'm also going to drop the $19.95 to replace the drive cable. If it still tests bad then I guess I have to replace the logic board.
Is it possible to replace the logic board with one with a 1.33GHz processor (it's an 800MHz iBook)?
Thanks,
Isaac

Mac mini (late 2012) Windows 8 Pro: no HDMI audio & driver error

Bootcamp 5.0.1
Mac mini (late 2012) server, installed boot camp on the second HD and gave entire HD to bootcamp partition.
Installed Windows 8 Pro from USB key created during installation from iso file, activated with Microsoft. Everything went smoothly, have one issue that I want to share, to see if anyone has been able to resolve. By the way, magic track pad, as expected only have basic functions supported, left and right click, scroll with two fingers, "tap to click" and secondary click with two fingers tap.
Only one issue so far but pretty major one. Audio through HDMI cable doesn't work, all sound plays via Mac-mini's internal speakers. Windows Device Manager shows error for "High Definition Audio Device" - The device cannot start. (Code 10).

Well, arguably bootcamp 5.0.1 does support Widows 7 or higher, there no reference anywhere that it doesn't.
I was able to fix issue by updating driver using intel audio driver. Everything works now...

Using G4 as external drive for Intel iMac?

I have a G4 DA with lots of personal information in it, including one bootable HD with OS 9 stuff. I have finally broken down and bought a 20" 2.66 GHz iMac as I can see that software for non-Intel based machines is beginning to dry up.
My question is, is there a way to hook the G4 to the iMac so that it can be used just as any other external drive could be used, without having to attach and detach cables every time I want to do it, or is the difference in processors such that this can't be done?
I know many would say "just transfer the files from one to the other," but I am sentimental about the old machine and don't want to get rid of it. I have upgraded the processor to 1.67 GHz so it is no slowpoke, but it can't compete with the newer ones for applications like video streaming, and I have become tired of seeing the spinning beachball.
Thanks in advance,
Dave

a brody:
One way I have to keep running a G4 for at least 30-40 years is to have 2-3 fully functional backup towers. I have a heavily upgraded Sawtooth and 2 spare towers in waiting for parts. I plan to get at least 1 more if not 2. A Sawtooth can be grabbed for as little as 50-80 on ebay. Even The lower MDD models like the dual 867 are well below 200 now often. Not an overly deep money pit to have some spare hardware.
I also own a Mac Pro but I honestly have more pride in my Sawtooth. The one I run has painted plastics from an automotive painting shop. Along with many many other customizations that would take over this thread to have to list.
My point is that with the proper arsenal of hardware to keep you going for years you can essentially keep running a G4 forever. I can understand someone's need to want to keep a G4 around forever. No matter how slow they are now or will be these towers have an appeal far beyond simple aesthetics.
Message was edited by: zen.state

Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the "Add or Remove Programs" control panel...

I have done all the steps that I could find, and I am still having this issue...can someone help me please?
Here is the diagnostics test I just ran as well. Not sure why it wont read my ipod either.
Microsoft Windows Vista Home Basic Edition Service Pack 2 (Build 6002)
Dell Inc. Inspiron 1525
iTunes 11.1.5.5
QuickTime not available
FairPlay 2.5.16
Apple Application Support 3.0.1
iPod Updater Library 11.1f5
CD Driver Not Available
CD Driver DLL Not Available
Apple Mobile Device 7.1.1.3
Apple Mobile Device Driver 1.62.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 00D5BEA809F38F28
Current user is an administrator.
The current local date and time is 2014-04-05 12:39:11.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:        {F45D6408-EDE8-4F4F-8BDF-AE815F918114}
Description:            Dell Wireless 1505 Draft 802.11n WLAN Mini-Card
IP Address:             192.168.0.16
Subnet Mask:          255.255.255.0
Default Gateway:    192.168.0.1
DHCP Enabled:      Yes
DHCP Server:         192.168.0.1
Lease Obtained:     Sat Apr 05 12:21:08 2014
Lease Expires:       Sat Apr 05 13:21:08 2014
DNS Servers:         68.105.28.12
                                68.105.29.12
                                68.105.28.11
Adapter Name:        {8F15FB4D-2EE6-4690-A8E7-82ACBF7A4F1E}
Description:            Marvell Yukon 88E8040 PCI-E Fast Ethernet Controller
IP Address:             0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:    0.0.0.0
DHCP Enabled:      Yes
DHCP Server:
Lease Obtained:     Wed Dec 31 17:00:00 1969
Lease Expires:       Wed Dec 31 17:00:00 1969
DNS Servers:
Active Connection: LAN Connection
Connected:             Yes
Online:                    Yes
Using Modem:        No
Using LAN:             Yes
Using Proxy:           No
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2014-04-05 12:38:45.
**** CD/DVD Drive Tests ****
LowerFilters: PxHelp20 (2.0.0.0),
No drivers in UpperFilters.
Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the “Add or Remove Programs” control panel.
**** Device Connectivity Tests ****
iPodService 11.1.5.5 is currently running.
iTunesHelper 11.1.5.5 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) ICH8 Family USB Universal Host Controller - 2830. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2831. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2832. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2834. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2835. Device is working properly.
Intel(R) ICH8 Family USB2 Enhanced Host Controller - 2836. Device is working properly.
Intel(R) ICH8 Family USB2 Enhanced Host Controller - 283A. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
RICOH OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
Most Recent Devices Not Currently Connected:
iPod touch (4th generation) running firmware version 6.0.1
Serial Number:       CCQH8BRSDT77
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

CD Driver Not Available
CD Driver DLL Not Available
With that one, I'd start with solution 3 from the following document:
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install

Trying to set up a new Lacie Porsche 9220 external drive on a 1.25Gb Dual Processor G4 Mirrordrive running OS X 10.5.8

I'm trying to set up a new Lacie Porsche 9220 external drive on a 1.25Gb Dual Processor G4 Mirrordrive running OS X 10.5.8.
I ran erase, formatting to Mac OS Extended (Journaled). But when I try to set up two partitions (Mac OS Extended Journaled for both) using Apple Partition Scheme, Disk Utility returns a fail as follows...
'Partition failed with the error: File system formatter failed'.
Also, before partitioning, whilst erasing, the following warning appeared in Disk Utility....
newfs_hfs: WARNING: wrapper option ignored since volume size > 256GB
Can't see whether the problem is with drive, system or myself.
The DU Log is as follows...
2013-01-19 23:14:03 +0000: Disk Utility started.
2013-01-19 23:17:26 +0000: Preparing to erase : “disk2s10”
2013-01-19 23:17:26 +0000:           Partition Scheme: Apple Partition Map
2013-01-19 23:17:26 +0000:           1 volume will be erased
2013-01-19 23:17:26 +0000:                     Name       : “disk2s10”
2013-01-19 23:17:26 +0000:                     Size       : 465.6 GB
2013-01-19 23:17:26 +0000:                     Filesystem : Mac OS Extended (Journaled)
2013-01-19 23:17:26 +0000: newfs_hfs: WARNING: wrapper option ignored since volume size > 256GB
2013-01-19 23:19:49 +0000: Initialized /dev/rdisk2s10 as a 466 GB HFS Plus volume with a 40960k journal
2013-01-19 23:19:49 +0000: Mounting disk.
2013-01-19 23:20:50 +0000: Could not mount disk2s10 with name disk2s10 after erase
2013-01-19 23:20:50 +0000: Erase complete.
2013-01-19 23:20:50 +0000:
2013-01-19 23:24:17 +0000: Preparing to partition disk: “ST950032 5AS Media”
2013-01-19 23:24:17 +0000:           Partition Scheme: Apple Partition Map
2013-01-19 23:24:17 +0000:           2 volumes will be created
2013-01-19 23:24:17 +0000:
2013-01-19 23:24:17 +0000:           Partition 1
2013-01-19 23:24:17 +0000:                     Name       : “Boot”
2013-01-19 23:24:17 +0000:                     Size       : 15 GB
2013-01-19 23:24:17 +0000:                     Filesystem : Mac OS Extended (Journaled)
2013-01-19 23:24:17 +0000:
2013-01-19 23:24:17 +0000:           Partition 2
2013-01-19 23:24:17 +0000:                     Name       : “Repository”
2013-01-19 23:24:17 +0000:                     Size       : 450.8 GB
2013-01-19 23:24:17 +0000:                     Filesystem : Mac OS Extended (Journaled)
2013-01-19 23:24:17 +0000:
2013-01-19 23:24:17 +0000: Creating partition map.
2013-01-19 23:24:23 +0000: Formatting disk2s5 as Mac OS Extended (Journaled) with name Repository.
2013-01-19 23:26:31 +0000: Partition failed for disk disk2s5 File system formatter failed.
2013-01-19 23:26:32 +0000: Formatting disk2s3 as Mac OS Extended (Journaled) with name Boot.
2013-01-19 23:27:22 +0000: Partition failed for disk (null) File system formatter failed.
2013-01-19 23:27:22 +0000: Partition failed for disk (null) File system formatter failed.
2013-01-19 23:27:22 +0000: Partition complete.
2013-01-19 23:27:22 +0000:
2013-01-19 23:27:52 +0000: Eject of “disk2” failed
2013-01-19 23:28:13 +0000: Unmount of “disk2” failed

...in fact, just trying it again, it appears to have successfully erased on a volume level...
2013-01-20 20:54:39 +0000: Disk Utility started.
2013-01-20 20:55:33 +0000: Preparing to erase : “Back-up”
2013-01-20 20:55:33 +0000:           Partition Scheme: Apple Partition Map
2013-01-20 20:55:33 +0000:           1 volume will be created
2013-01-20 20:55:33 +0000:                     Name       : “Back-up”
2013-01-20 20:55:33 +0000:                     Size       : 465.8 GB
2013-01-20 20:55:33 +0000:                     Filesystem : Mac OS Extended (Journaled)
2013-01-20 20:55:33 +0000: Creating partition map.
2013-01-20 20:55:36 +0000: Formatting disk2s3 as Mac OS Extended (Journaled) with name Back-up.
2013-01-20 20:59:19 +0000: Erase complete.
2013-01-20 20:59:19 +0000:
I'm now testing this for read/write. Ummm, no go. It has disconnected the drive. The system has also come back with this dialogue...
"The operation cannot be completed because you do not have sufficient privileges for some of the items." The items were just some photos (Jpegs) for which there should not be any privilege issues.
Does this offer you enough to suggest any possibilities, perhaps?
Thanks

Driver Intel USB 3.0 Driver for Intel 8 and U/Y Series doesn't work with a specific Kingston USB

Hello guys, just the other problem I'm facing with the 840 G2
I'm working in the MDT image for the HP 840 G2 and I would like to comment you one problem that I found with the USB 3.0 drivers. Based in your webpage, the last HP USB 3.0 official drivers are:
Intel USB 3.0 Driver for Intel 8 and U/Y Series Products
3.0.1.41 A from 15 dic 2014
I have found that those drivers doesn't work properly; if you insert a Kingston DTSE9 (32GB) the content of the usb will not be accessible randomly. The event viewer will display:
The driver detected a controller error on \device\harddisk1\DR13
To solve this problem you have to obtain the last version of the drivers from the Intel webpage:
https://downloadcenter.intel.com/download/22824/USB-3-0-Driver-Intel-USB-3-0-eXtensible-Host-Control...
I have all the drivers properly installed and it seems that the computer is working fine, however I'm a little worry thinking if I should update all the driver to avoid possible problem like this one.
If you have found similar problems it would be nice to share it.
Thank you very much.

Hi,
Please use the following post:
http://h30434.www3.hp.com/t5/forums/replypage/board-id/General/message-id/76373
Thanks.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

C260 driver error. intel(r)pentium(r)processor n- and j-series/intel ehci usb -0f34

Similar Messages

Maybe you are looking for