C3-00 opera error using wi-fi

After posting over opera forums, still no one can help me.. wondering if any one here can help me..
I've bought the cell brand new a week ago.
WAs using phone without sim card and opera work ok.. now i've inserted the sim card, and opera won't work and a few other thing over the phone are buggy but i'll work around them later.
Main problem is using wi-fi, opera tells me Verification of server certificate failed. Please check date setting on your phone.
Still time set in opera = current one, date in phone is up to date ... Can't delete opera and even with downloading new opera 5.1 of Ovi store give's me the same problemes.
looking forward to know if any one has a way to fix this..
(i tried a res to factory settings / all ) and still doesnt work..
Hope any of you around here know a way to fix this
(Advance user, new to nokia phones)
If you know a way to go through special menus and so on please explain step by step procedure and i'll be able to naviguate around myself

Can you use Opera mobile 10 instead of Opera mini 5.1. Try another version of opera, or skyfire from skyfire.com. I have C5-00 and Opera mobile 10. (No wi-fi on C5-00 , skyfire 1.5 does not work on C5-00 but works on E71. SF says it works with flash video sites like veoh.com )
Just go to Opera.com with your phone if you can. There are different versions.

Similar Messages

"Not Enough Memory to Complete this Operation" Error using notifiers in LabVIEW

I get the (windows?) error message "Not Enough Memory to Complete this Operation" when using notifiers to send a flattened byte string as a response from one VI back to my calling VI. I do get my data and everything works out perfectly between the two VIs, but I do get this annoying error message that requires a user interface action. Why?

Well, I'm thinking you may have stumbled across a LV issue. I can get it to crash a lot faster than that when I clear your plot history in the top chart. It definitely seems as though LV has a huge memory leak on charts having their history cleared. With your 500,000 data point history, I lose about 170MB of memory every time I clear the chart history.
When I run your VI, the first time you plot data, I see a 170MB jump in memory, which I am assuming is the chart allocating its chart buffer. But, then I continue to see more memory being used as more data is collected (if you don't use your default 1 sample a sec rate, you can see this happen much faster - I am using 5k sample rate and 5k samples). Eventually, even without clearing the chart history, this will cause the system to crash.
I did a quick test and dumped the waveform and just used doubles and plotted that. Memory usage is drastically better, as I see no memory leak during standard acquisition (I still see the memory leak when the chart is cleared however).
You may have to rewrite to not use the waveform and signal for your chart and just use DBLs.

Web Service Proxy error: "No operation found using soap keys"

I'm trying to use the new tools, and having a little trouble. Not many results when searching for this error message.
I have developed and deployed a new Java web service proxy using the outside-in approach according to the [help docs|http://help.sap.com/saphelp_nwpi71/helpdata/EN/46/7f2fef88190ad3e10000000a11466f/frameset.htm] (PI 7.1 SP07, NWDS 7.1 CE SP09 PAT0000). Started with a Service interface in ESR, then generated a java bean skeleton into a new EJB project in NWDS, then wrote business logic and deployed.
When I test the web service (with 3 different SOAP test clients) I get the same error, below:
     <faultstring>com.sap.engine.services.webservices.espbase.server.additions.exceptions.ProcessException:
No operation found using soap keys [], [spmat_jdbc_receiver_proxy]. InterfaceMapping Object class:
com.sap.engine.services.webservices.espbase.mappings.InterfaceMapping mappings: {BindingQName=
{urn:nexeninc:pi:ll:spmat:100}SI_I_Sync_SPMAT_JDBC_Receiver_ProxyBinding, BindingType=Soap, PortTypeQName=
{urn:nexeninc:pi:ll:spmat:100}SI_I_Sync_SPMAT_JDBC_Receiver_Proxy, JAXWSInterface=true, InterfaceMappingID=-
27e4d529:127632b5c52:-7ebb}.</faultstring>
My service endpoint interface looks like this (unimportant lines removed):
package nexeninc.pi.ll.spmat._100;
@javax.jws.WebService(name = "SI_I_Sync_SPMAT_JDBC_Receiver_Proxy", targetNamespace = "urn:nexeninc:pi:ll:spmat:100")
@javax.jws.soap.SOAPBinding(parameterStyle = javax.jws.soap.SOAPBinding.ParameterStyle.BARE, style = javax.jws.soap.SOAPBinding.Style.DOCUMENT, use = javax.jws.soap.SOAPBinding.Use.LITERAL)
public interface SIISyncSPMATJDBCReceiverProxy {
@javax.jws.WebMethod(operationName = "SI_I_Sync_SPMAT_JDBC_Receiver_Proxy", action = "http://sap.com/xi/WebService/soap1.1")
@javax.jws.WebResult(name = "spmat_jdbc_receiver_proxy_response", targetNamespace = "", partName = "spmat_jdbc_receiver_proxy_response")
public generated.SpmatJdbcReceiverProxyResponse siISyncSPMATJDBCReceiverProxy(@javax.jws.WebParam(name = "spmat_jdbc_receiver_proxy", targetNamespace = "", partName = "spmat_jdbc_receiver_proxy") generated.SpmatJdbcReceiverProxy spmat_jdbc_receiver_proxy);

(continued from above post)
And my implementation bean looks like this (unimportant lines removed):
package nexeninc.pi.ll.spmat._100;
@SessionHandlingDT(enableSession = false)
@AuthenticationDT(authenticationLevel = AuthenticationEnumsAuthenticationLevel.BASIC)
@TransportGuaranteeDT(level = TransportGuaranteeEnumsLevel.NONE)
@WebService(serviceName = "SI_I_Sync_SPMAT_JDBC_Receiver_Proxy_Service", portName
= "SI_I_Sync_SPMAT_JDBC_Receiver_Proxy_Port", endpointInterface
= "nexeninc.pi.ll.spmat._100.SIISyncSPMATJDBCReceiverProxy", targetNamespace = "urn:nexeninc:pi:ll:spmat:100", wsdlLocation
= "META-
INF/wsdl/nexeninc/pi/ll/spmat/_100/SI_I_Sync_SPMAT_JDBC_Receiver_Proxy/SI_I_Sync_SPMAT_JDBC_Receiver_Proxy.wsdl")
@Stateless
public class SIISyncSPMATJDBCReceiverProxyImplBean {
     @RelMessagingNW05DTOperation(enableWSRM = false)
     public generated.SpmatJdbcReceiverProxyResponse siISyncSPMATJDBCReceiverProxy(
               generated.SpmatJdbcReceiverProxy spmat_jdbc_receiver_proxy) {
          System.out.println("Starting siISyncSPMATJDBCReceiverProxy.");
When we first created the new endpoint in NWA, we tried asigning a new name for both "Service Endpoint Name" and "In New Service", and we received this error.
We then deleted the endpoint and created another new one, setting "Service Endpoint Name" to match the portName in the implementation bean: "SI_I_Sync_SPMAT_JDBC_Receiver_Proxy_Port", but that didn't work either. The only option we enabled in the endpoint was HTTP authentication: User ID/Password.
My ejb-j2ee-engine.xml and application-j2ee-engine.xml are both empty (but they exist).
I am new to EJBs and JAX-WS so hopefully it's something simple. All help appreciated!
Apologies for the long (and wide) post.
- Rob

Operations error occured when executing LDAP query to read members of AD group in windows 8 operating system using javascript and active-x

My code javascript script is
objConnection = new ActiveXObject("ADODB.Connection");
objConnection.Provider="ADsDSOObject";
objConnection.Open("ADs Provider");
objCommand = new ActiveXObject("ADODB.Command");
objCommand.ActiveConnection = objConnection;
objCommand.CommandText = "SELECT sAMAccountName,displayName, givenName, SN,CN, mail,distinguishedName,primaryGroupToken,member,ADsPath,MemberOf FROM 'LDAP://"+GrpDomain+".corp.com' WHERE objectCategory='group'
and objectClass='group' and sAMAccountName='"+GrpName+"'";
objRecordSet = objCommand.Execute();
This code executes successfully on window 2008 server machine,
but gives "Operations error occurred" on windows 8 operating system
on line of code highlighted above

Hi,
In regard to scripts related issue, I suggest you refer to The Official Scripting Guys Forum to get professional support:
The Official Scripting Guys Forum
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
Thank you for your understanding and support.
Best Regards,
Amy Wang

Getting " Not enough memory for the operation error " in BOE

Hi,
We are using BOE 11.0.
we try to schedule a new report with multiple database logins for testing in BOE. When we run the report we are getting error like "Not enough memory for the operation error"
The same report has been executed successfully when we run using Crystal reports developer. The report is fectching less than 10K records from all the databases together.
Please let me know which is causing the issue and also let me know is there any limit in the number of databases connecting for a single report.
many thanks in advance for all your help.
Cheers,
Suri ;-)

Hi Sarthan,
Sorry. I'm new to BOE. We know only scheduling the reports creating folders etc. :-)
I've seen one parameter "Maximum Cache Size Allowed (KBytes)" and the value for this parameter is 5000.
If we change it to a big number whether we can solve the issue ? Please suggest.
Cheers,
Suri ;-)

Why do I get -18001 Errors using Customised TestStand User Interface

Hi all
I have a problem when attempting to run my application on my host NT PC. I have a customised operator interface to TestStand written using Labview 5.1.1 and built using the LabVIEW application builder. I am running the TestStand Development (Run-Time) System on my host PC.
The problem is that as soon as I go to run my sequence of vis (mass compiled using the same version of LabVIEW and assembled for run-time distribution) I receive the error '-18001 VI Not Executable.'
I think this is probably to do with how I've included the ActiveX server in my LabVIEW User Interface application, but knowing very little about ActiveX I'm not sure exactly what the problem is.
If anyone
has any ideas, I would be extremely grateful for any assistance you could offer. My TS version is 1.0.1
Thanks
Dave

David,
I would like to add to Richard's input. The typical reasons a VI cannot be executed that cause this message are:
1) There is an error in the VI such that the run arrow of the VI is broken when the VI is open in the LV development environment. This problem is usually easy to debug because you should get the error (shown below) when running your sequence in the sequence editor using the default "LabVIEW" ActiveX server provided by the LV development environment (not the LV ActiveX server provided by your operator interface which is by default named "TestStandLVGUIRTS" ).
An error occurred in the 'MyVIStep' step of the 'MainSequence' sequence in 'MySequence.seq'.
LabVIEW : VI is not executable.
An error occurred accessing the LabVIEW ActiveX automation server. Error Code: -18001
2) The same error will occur when
a. you are using any LV ActiveX server other than the "LabVIEW" server provided by the LV development environment, AND
b. at least one of the called VI was not assembled for distribution properly. This means that not all test VIs and their *entire* hierarchy were distributed.
I am not sure exactly what you have done so have compiled some information that I think will help. Below I have included the document, Overview of Distributing TestStand when your Sequences use the LV Standard Prototype Adapter, which will appear in the NIDZ shortly. Another useful document is the NIDZ document Distributing LabVIEW Test VIs, which you can obtain from our website. Read these documents before preceding with the steps immediately below, which give you an example process for distributing. This may help provide a better understanding and guidance in the distribution process. We are working to simplify this process in future versions of TestStand.
For the following example distribution I recommend that you are use default shipping code so that the problem is not complicated with potential errors added through customizations you have made.
Building The Operator Interface
The following are steps if you are using a LabVIEW operator interface.
1) Copy the contents of \OperatorInterfaces\NI\LV to \OperatorInterfaces\User\LV.
2) Open a new VI in LabVIEW. Make sure all other VIs are closed.
3) In LabVIEW Select Tools>>Build Application or Shared Library
4) In the builder click the Load button and load \OperatorInterfaces\User\LV\testexec.bld. This build script is configured to create testexec.exe that contains the LV ActiveX server with the name of TestStandLVGUIRTS (see the Application tab of the builder).
5) In the builder click Build.
6) Once the application testexec.exe is built, run it once so that the server TestStandLVGUIRTS is automatically registered. You do not need to run a sequence. Close texec.exe.
Creating a LabVIEW Run-time Server
If you are using the LabVIEW operator interface then skip this section. The following steps are meant for those who use an operator interface written in a ADE other than LabVIEW. They provide you with a LabVIEW run-time server that is used by TS to run your VIs.
1) Copy the contents of \Components\NI\RuntimeServers to \Components\User\RuntimeServers.
2) Open a new VI in LabVIEW. Make sure all other VIs are closed.
3) In LabVIEW Select Tools>>Build Application or Shared Library
4) In the builder click the Load button and load \Components\User\RuntimeServers\LabVIEW\TestStandLVRTS.bld. This build script is configured to create TestStandLVRTS.exe that contains the LV ActiveX server with the name of TestStandLVRTS (see the Application tab of the builder).
5) In the builder click Build.
6) Once the application TestStandLVRTS.exe is built, run it once so that the server TestStandLVRTS is automatically registered on your development machine. Close TestStandLVRTS.exe.
Assembling the Test VIs for Run-Time Distribution
This distribution process uses one of the shipping TS examples that calls LV VIs.
1) From LV mass compile all VIs in the directory \Examples\AccessingArrays\UsingLabVIEW\. Please make sure that there were no error messages in the Status tab of the Mass Compile dialog box.
2) In the sequence editor open \Examples\AccessingArrays\UsingLabVIEW\AccessingArrays.seq
3) Confirm that the sequence runs without problem.
4) In the sequence editor select Tools>>Assemble Test VIs for Run-time Distribution.
5) If you are using TestStand 2.0 select \Examples\AccessingArrays\UsingLabVIEW\AccessingArrays.seq as the file from which the VIs should be assembled.
6) Set the target directory to be something distinct like C:\temp\AssblVIs.
7) If you are using TestStand 2.0 skip adding Dynamic VIs
8) Save with or without diagrams. Its your choice.
Change Search Directories
Once the VIs are assembled successfully, you must add the new target directory to the TS search directories.
1) In the sequence editor select Configure>>Search Directories.
2) Add your target search directory (e.g. C:\temp\AssblVIs) to the search directories.
3) Close the Edit Search Directories dialog box.
4) Confirm that your sequence steps now reference the assembled VIs. Right click on a step in the sequence and select Specify Module.
5) The dialog should show that the code module is found in the target directory (e.g. C:\temp\AssblVIs) that you just added to the search directories.
6) Run the sequence. This is the initial test to see if the VIs are assembled properly.
Switch the LV Adapter to use the TestStandLVRTS server or TestStandLVGUIRTS
1) In the sequence editor select Configure>>Adpaters.
2) In the Configurable Adapters control select the LabVIEW Standard Prototype Adapter and then click the Configure button.
3a) If you are not using the LV operator interface then switch the ActiveX server to TestStandLVRTS.
3b)If you are using the LV operator interface then switch the ActiveX server to TestStandLVGUIRTS.
4) Close the adapter configuration dialog boxes. You will get a couple of questions boxes. Just click OK each time.
5) Now run your sequence. If successful you are no longer using the LV development environment to run your VIs. This shows that the VIs were assembled correctly, the LV ActiveX server is working properly and that the search directories are configured properly.
You can now try and run the sequence using your operator interface on you development computer. If this test works it means that you have also confirmed that your operator interface is working correctly with all the other components. Now it is just a matter of moving all the component correctly to the target machine.
Distributing Components
-To distribute your operator interface use the distribution tool of the application development environment (ADE) in which you built your operator interface.
-To distribute the TS engine using the Run Engine Installation Wizard tool. This tool is typically not used for distributing your sequences and VIs, which you will probably distribute more frequently than the TS engine. It does distribute and register your LV run-time server (if you are using one) as long as you have stored it in \Components\User\RuntimeServers. It also distributes other TS components that you have stored under the directory \Components\User\.
-You can use whatever distribution system you like to distribute your VIs and sequence files (e.g. ZIP and network transfer are popular) . Ensure that you distribute the assembled VIs and not the development VIs. Also ensure that the location of the VIs on the target machine is one of the TS search directories.
Hope this helps.
Regards,
Kitt
=========================================
Title:
Overview of Distributing TestStand when your Sequences use the LV Standard Prototype Adapter
The general outline of the components to be distributed and the actions to take are followed by a more detailed description.
Components that need to be distributed:
TS engine
Operator interface
LabVIEW executable that will act as a LabVIEW ActiveX automation server (If the operator interfaces is written in LabVIEW, it can function as the LabVIEW ActiveX automation server.).
LabVIEW run-time engine
LabVIEW test VIs
Test sequence files
Actions before distributing:
It is recommended that you test the distribution components on the development machine before you distribute them to your target machine. In this manner you can more easily debug errors that you may encounter
Create the executable that will serve as your LabVIEW ActiveX server on the target machine (components 2 or 3 above).
Assemble the test VIs for distribution.
Update the TestStand search directories so that the sequences reference the assembled VIs.
Configure the LabVIEW Standard Prototype Adapter to use the LabVIEW ActiveX server that you will install on the target machine.
Test the distribution components on the development machine.
Enter section headings, separating each section with a line break:
TS Engine Component
Operator Interface Component
LabVIEW ActiveX Server
Configuring the LabVIEW Standard Prototype Adapter
LabVIEW Run-time Engine Component
Assembling your Test VIs for Distribution
Note
TS Engine Component
With any TestStand distribution you must install the TestStand runtime engine on the target machine. The Run Engine Installation Wizard tool, found under Tools menu of the Sequence Editor, facilitates this process. The wizard tool will create two files, SetupTSEngine.exe and TSEngine.cab. Move the two files to your target machine and run SetupTSEngine.exe to install the TestStand engine.
These installation files include the current configuration settings that exist in the Sequence Editor at the time the tool is invoked. It also includes all process models, TestStand types and step type modules. If you have customized components of TestStand and saved them under the directory TestStand\Components\User, then the components will also be included with the engine installation.
You must purchase at least a base deployment or debug deployment license for each machine on which you install the TestStand engine.
Operator Interface Component
You will also need to install an operator interface executable on the target machine. This program acts as a client to the TS runtime engine, controlling the execution of sequences and displaying their progress. TestStand ships with several versions of TestStand operator interfaces, which are written in different application development environments (ADE). For distributing the operator interface executable, refer to the application development environment in which it was created.
LabVIEW ActiveX Server
You must have a LabVIEW ActiveX server on the target machine. TestStand uses the LabVIEW ActiveX server to run VIs using either the LabVIEW development environment or the LabVIEW runtime engine. The LabVIEW ActiveX server is provided by either LabVIEW development environment or by any LabVIEW executable that has been built with �Enable ActiveX Server� selected. This setting can be accessed in the LabVIEW Application Builder during the build process. When this preference is enabled, you must enter a server name. You will use the server name to configure the LabVIEW Standard Prototype adapter in TestStand.
If your operator interface is written in LabVIEW, then it can act as the LabVIEW ActiveX server on your target machine. TestStand ships with two operator interfaces written in LabVIEW. The standard LabVIEW operator interface is located in TestStand\OperatorInterfaces\NI\LV, while a simplified version is located in TestStand\Examples\OperatorInterfaces\Simple LV. LabVIEW buildscripts are provided for these applications to facilitate building an operator interface in the latest version of LabVIEW. The settings of these buildscripts are such that the applications are LabVIEW ActiveX servers with the server names of TestStandLVGUIRTS for the standard operator interface, and TestStandSimpleLVGUIRTS for the simple operator interface. The applications register the servers the first time they are executed. If you want to manually register or unregister one of the servers, you can invoke the executable with the /RegServer and /UnregServer command-line arguments respectively.
If your operator interface is programmed in a language other than LabVIEW, then you will need a separate LabVIEW executable to provide the LabVIEW ActiveX server on your target machine. For this purpose, TestStand ships with a LabVIEW run-time server application located in TestStand\Components\NI\RuntimeServers\LabVIEW. A LabVIEW buildscript is provided for this application to facilitate building a run-time server in the latest version of LabVIEW. The settings of this buildscript are such that the application is a LabVIEW ActiveX server with the server name of TestStandLVRTS.
Note: When an ActiveX executable server is accessed, the executable is launched automatically if it is not already executing.
Configuring the LabVIEW Standard Prototype Adapter
When TestStand runs a VI using the LabVIEW Standard Prototype adapter, it does so using a LabVIEW ActiveX server. By default the adapter is configured to use the �LabVIEW� server, which is provided by the LabVIEW development environment. If you do not have the LabVIEW development environment on your target machine then you must configure the LabVIEW Standard Prototype adapter within TestStand to use a different server (e.g. TestStandLVGUIRTS, TestStandLVRTS, or TestStandSimpleLVGUIRTS).
To configure your LabVIEW Standard Prototype adapter, select Configure>>Adapters from the menu. In the Adapter Configuration dialog box that appears, select the LabVIEW Standard Prototype Adapter in the Configurable Adapters section. Click the Configure button. You can select or type a server name in the Select or Type Which LabVIEW ActiveX Server to User control. If your server name is not in the list you will need to type it.
As explained in the LabVIEW ActiveX Server section above, TestStand ships with LabVIEW buildscripts to build a LabVIEW operator interface and a LabVIEW run-time server application. These applications are LabVIEW ActiveX servers with server names TestStandLVGUIRTS and TestStandLVGRTS, respectively. You can configure you LabVIEW Standard Prototype adapter to use one of these servers.
LabVIEW Run-time Engine Component
If any of your sequence steps use the LabVIEW adapter or if your operator interface is written in LabVIEW, then you must install the LabVIEW runtime engine on the target machine. It is important that your LabVIEW run-time engine is the same version as the VIs that TestStand executes.
You can find installation files for the LABVIEW 5.1 run-time engine in the LabVIEW installation directory, Labview\APPLIBS\installs\RunTime. In addition, you can choose to automatically distribute and install the LabVIEW run-time engine with the distribution of a LabVIEW executable. Refer to LabVIEW documentation.
Assembling your Test VIs for Distribution
After distributing TestStand, you must ensure that your sequences are able to locate the VIs they call, and the VIs must be able to locate their required resources.
One common mistake is to simply copy the original VIs from the development machine to the target machine. Once you have configured your LabVIEW Standard Prototype adapter to use a LabVIEW ActiveX server other than LabVIEW, your sequence will not be able to execute your original test VIs that your sequences call.
TestStand provides the Assemble Test VIs for Distribution tool, which gathers test VIs and their required resources, and places them in a common location for distribution. You can then modify your TestStand search directories so that your sequences reference the assembled VIs. These topics are covered in the NIDZ document Distributing LabVIEW Test VIs.
Links: See Distributing LabVIEW Test VIs below
Note
Remember to test your distribution components on your TestStand development system before distributing TestStand. If the execution does not work on the development system it is not going to work on your target machine. On your development machine you have more ability to debug problems you may encounter.
Note: One common problem of testing distribution components on your TestStand development system is that your sequences reference the original Test VIs instead of the assembled test VIs. Refer to the NIDZ document Distributing LabVIEW Test VIs for assistance.
Once the components work on your development machine, you are ready to install them on your target machine. The order in which you install these components on the target machine is irrelevant.
==============================================

Error Using OEM to create export files

Hi
I get the following error whenever I try to use OEM to create export files (login to OS as oracle user -> http://localhost:1158/em -> login as SYSTEM -> Maintenance -> Export to Export Files (with oracle user as host credentials)
>>>
Validation Error
Examine and correct the following errors, then retry the operation:
Error - ERROR: NMO not setuid-root (Unix-only)
>>>
From what I've read in this forum and in others is that the problem is often related to the owner/group permissions associated with the bin/nmo and bin/nmb files. However I've tried the posted solutions by changing the owner/permissions as suggested, but this does not help. I get the same error regardless if the files are owned by oracle or by root.
Here is some more info
>>>
[root@rhlinux bin]# id oracle
uid=501(oracle) gid=502(dba) groups=502(dba)
[root@rhlinux bin]# ls -ld /app/
drwxr-xr-x 4 root root 4096 Jul 6 13:36 /app/
[root@rhlinux bin]# ls -ld /app/oracle/
drwxrwxr-x 5 oracle dba 4096 Jul 10 10:13 /app/oracle/
[root@rhlinux bin]# ls -ld /app/oracle/product/
drwxrwx--- 3 oracle dba 4096 Jul 6 16:04 /app/oracle/product/
[root@rhlinux bin]# ls -ld /app/oracle/product/v10.2.0/
drwxr-x--- 58 oracle dba 4096 Jul 11 15:31 /app/oracle/product/v10.2.0/
[root@rhlinux bin]# ls -ld /app/oracle/product/v10.2.0/bin/
drwxr-xr-x 2 oracle dba 8192 Jul 20 11:19 /app/oracle/product/v10.2.0/bin/
[root@rhlinux bin]# ll nm?
-rwxr-x--- 1 root dba 18462 Jul 6 16:16 nmb
-rwxr-x--- 1 root dba 19624 Jul 6 16:16 nmo
>>>
>>>
[oracle@rhlinux bin]$ uname -a
Linux rhlinux 2.6.9-34.0.2.EL #1 Fri Jun 30 10:23:19 EDT 2006 i686 i686 i386 GNU/Linux
>>>
>>>
[oracle@rhlinux bin]$ sqlplus system@dware
SQL*Plus: Release 10.2.0.1.0 - Production on Thu Jul 20 16:34:16 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter password:
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
>>>
>>>
[oracle@rhlinux bin]$ emctl status agent
TZ set to Canada/Saskatchewan
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
Agent Version : 10.1.0.4.1
OMS Version : 10.1.0.4.0
Protocol Version : 10.1.0.2.0
Agent Home : /app/oracle/product/v10.2.0/rhlinux.swlocal_DWARE
Agent binaries : /app/oracle/product/v10.2.0
Agent Process ID : 32098
Parent Process ID : 30792
Agent URL : http://rhlinux.swlocal:3938/emd/main
Started at : 2006-07-20 12:00:05
Started by user : oracle
Last Reload : 2006-07-20 12:00:05
Last successful upload : 2006-07-20 16:27:29
Total Megabytes of XML files uploaded so far : 1.54
Number of XML files pending upload : 0
Size of XML files pending upload(MB) : 0.00
Available disk space on upload filesystem : 47.83%
Agent is Running and Ready
>>>
>>>
[oracle@rhlinux bin]$ emctl status dbconsole
TZ set to Canada/Saskatchewan
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://rhlinux.swlocal:1158/em/console/aboutApplication
Oracle Enterprise Manager 10g is running.
Logs are generated in directory /app/oracle/product/v10.2.0/rhlinux.swlocal_DWARE/sysman/log
>>>
Any other ideas what might be causing this problem?
Thanks and take care,
Shayne

From what I've read in this forum and in others is
that the problem is often related to the owner/group
permissions associated with the bin/nmo and bin/nmb
files. However I've tried the posted solutions by
changing the owner/permissions as suggested, but this
does not help. I get the same error regardless if the
files are owned by oracle or by root.
I am not sure which "posted solutions" you had, but this is related to not running root.sh which must be run against the Agent Home.
1. Stop the Agent (emctl stop agent) while connected to the OS as Oracle user (normally oracle) that installed Grid Control
2. Connect to the OS as root and run root.sh from Agent ORACLE_HOME (if you do not have root access, your System Admin can do it)
3. Start the Agent (emctl start agent) while connected to the OS as Oracle user

Unable to complete this operation error

Hi,
I installed Firefox 4 and when I go to my HP printer properties and click on Printer Services I get "Unable to complete this Operation" error. If I uninstall Firefox it works fine. When I reinstall Firefox I get the same error. Any help would be appreciated because I would like to use Firefox.
Thanks,
Phil

Hi,
According to the error message, please use performance monitor to diagnose if it is a memory-related bottleneck and you can use the counters of the memory part in the article below:
https://technet.microsoft.com/en-us/magazine/2008.08.pulse.aspx
In addition, it may be due to thousands of open connections to the server are in a TIME_WAIT state. You can run "netstat -an" command on the affected server and client. If you see mutiple connections in the TIME_WAIT state, you can follow the article
to increase the number of TCP/IP connections:
https://msdn.microsoft.com/en-us/library/ee377084(v=bts.70).aspx
Furthermore, if you are running windows server 2003, please make sure that you have installed the KB 948496 and stop all services that you don't need.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

BATCH-FTP-EWAY-OPERATION-ERROR

Hi all,
I get an error running my JCAPS application using an BatchFTP adapter. With the message subject BATCH-FTP-EWAY-OPERATION-ERROR.
The message is the following:
Message: Batch FTP eWay error when doing data transfer operation in [put()], message=[com.stc.eways.batchext.FtpFileException: BATCH-MSG-M0130: FtpFileClientImpl.doTransferPut(): put got exception [com.stc.eways.batchext.FtpFileException: BATCH-MSG-M0129: FtpFileClientImpl.doTransferPut(): Failed to storeFile. Reply from ftp server is [250 CWD command successful.].].].
The error message is:
<?xml version="1.0" encoding="UTF-8"?>
<Alert xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation=".\Alert.xsd">
<Id>0</Id>
<Type>Alert</Type>
<SeverityCode>2</SeverityCode>
<Severity>MAJOR</Severity>
<MessageCode>BATCH-FTP-EWAY-OPERATION-ERROR</MessageCode>
<Message>BATCH-FTP-EWAY-OPERATION-ERROR</Message>
<MessageDetails><![CDATA[Batch FTP eWay error when doing data transfer operation in [put()], message=[com.stc.eways.batchext.FtpFileException: BATCH-MSG-M0130: FtpFileClientImpl.doTransferPut(): put got exception [com.stc.eways.batchext.FtpFileException: BATCH-MSG-M0129: FtpFileClientImpl.doTransferPut(): Failed to storeFile. Reply from ftp server is [250 CWD command successful.].].].]]></MessageDetails>
<OperationalStateCode>7</OperationalStateCode>
<OperationalState></OperationalState>
<ObservationalStateCode>0</ObservationalStateCode>
<ObservationalState>UNOBSERVED</ObservationalState>
<ListenersNotified>0</ListenersNotified>
<PhysicalHostName>jcapsdr:19048</PhysicalHostName>
<EnvironmentName>BH_PROD</EnvironmentName>
<LogicalHostName>AD</LogicalHostName>
<ServerType>INTEGRATION</ServerType>
<ServerName>server</ServerName>
<ComponentType>EWAY</ComponentType>
<ComponentProjectPathName>prjBHToSATO</ComponentProjectPathName>
<ComponentName>BatchFTP2</ComponentName>
<TimeStamp>Tue Sep 06 11:16:23 EST 2011</TimeStamp>
</Alert>
What can be the problem?
Thanks for your help.
Cheers,
Andrew

If the File size is larger, then we encounter this exception.
Remedy: Restart of the service may solve
or split the file size and place them.

Error re-trying Stalled Operation Error

Hi,
We have a solution that uses Workspace and assigns tasks to users/queues. Sometimes we get stalled operation errors and we re-try them after fixing whatever may have been wrong in our solution. We currently have one stalled operation error that does not re-try successfully.
We instead get the below error from adminui:
When looking at the error in the server log, this is the error we get:
ERROR [com.adobe.idp.jobmanager.execution.workadapter.JobStoreAdapter] (http-0.0.0.0-8080-1) Job not found for job id f05f87640a8b04077cc5f27ad1a1e817
Does anyone have an idea what may cause this kind of an error? Your input will be much appreciated.
Thanks,
Enock

There are a lot of different opinions about partitioning in Mac OS X and you can read some of them here:
http://forums.cnet.com/5208-7592_102-0.html?forumID=25&threadID=44865&messageID= 530144
and here
http://forums.appleinsider.com/archive/index.php/t-8096.html
My opinion is that partitions cam be useful when:
1. the OS can't manage big volumes (as it was in the past)
2. the OS can't optimize the space on big volumes
3. want to install 2 or more separate OSes
4. organization (like in your case).
Now, OS X filesystem (HFS+) is robust and reliable and OS X is a multitasking system that parallelizes I/O operations like reading or writing a disk.
So if you have 2 separate hard disk the system can parallelize the operations (i.e. reading from one and writing into another one) but if you have 2 partitions the system (or better the disk subsystem) have to jump back and forth among the partitions.
About the linking schema of the Audio interfaces and the FW hard disks it can change: I connect my FW disk to the MOTU and the MOTU to the mac while a friend of mine have to put the disk before of his Presonus.
Thanks for the beer!
cheers
rob

Cannot load large CSV files in SignalExpress("Not enough memory to complete this operation" error)

Hi guys,
I'm new here and just have browsed
some of the related topics here regarding my problem but could not seem
to find anything to help me fix this problem so I decided to post this.
I currently have a saved waveform from an oscilloscope that is quite
big in size(around 700MB, CSV file format) and I want to view this on
my PC using SignalExpress. Unfortunately when I try to load the file
using "Load/Save Signals -> Load From ASCII", I always get the "Not
enough memory to complete this operation" error. How can we view and
analyze large waveform files in SignalExpress? Is there a workaround on
this?
Thanks,
Louie
P.S.>I'm very new to Signal Express and haven't modified any settings on it.

Hi Louie,
Are you encountering a read-only message when you tried to save the boot.ini file? If so, you can try this method: right-click on My Computer >> Select "Properties", and go to the "Advanced" tab. Select "Settings", and on the next screen, there is a button called Edit. If you click on Edit you should be able to modify the "/3GB" tag in boot.ini. Are you able to change it in this manner? After reboot, you can reload the file to see if it helps.
To open a file in SignalExpress, a contiguous chunk of memory is required. If SignalExpress cannot find a contiguous memory chunk that is large enough to hold this file, then an error will be generated. This can happen when fragmentation occurs in memory, and fragmentation (memory management) is managed by Windows, so unfortunately this is a limitation that we have.
As an alternative, have you looked at NI DIAdem before? It is a software tool that allows users to manage and analyze large volumes of data, and has some unique memory management method that lets it open and work on large amounts of data. There is an evaluation version which is available for download; you can try it out and see if it is suitable for your application.
Best regards,
Victor
NI ASEAN
Attachments:
Clipboard01.jpg ‏181 KB

Unsafe Operation error/Local preview

Hello,
I am using a Flash extension (Slideshow Pro) to put together
a slideshow. Just upgraded to CS3 from StudioMX 2004. I'm using the
newest version of the extension to create new SWF files but getting
the "Flash has stopped a potentially unsafe operation" error when I
try to preview them locally in HTML.
I have been to the security setting manager several times,
allowed individual links as well as the directory I am working in,
they appear in the "allow" list as they should, however I still get
the same error (yes, I've re-published and re-started everything) I
understand that this error is related to older security settings,
but why am I getting it with newly-created files?
If it matters at all the image manager I am using is
Slideshow Pro Director, which resides in my root directory and
provides xml feeds for the slideshows.
Thanks in advance for helping an amateur out! Molly

Welcome to our community
You see this dialog because of Flash Player security. When you run your project from the local C drive, you are in very unsafe territory from the perspective of the Flash Player. Flash Player then blocks certain actions until you specifically configure it to say the folder where you are running the SWF is "Safe".
These restrictions aren't imposed if you place the content on a web server, as the web page is automatically in the "safe" zone. So once you upload to a web server, you have no concerns. Your end users will not see the message you are seeing.
There is more at the link below:
Click here to view
Cheers... Rick
Helpful and Handy Links
Begin learning Captivate 5 moments from now! $29.95
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcererStone Blog
Captivate eBooks

"CreateUser Failed" / error result (1); Operations error

Good afternoon,
I'm still having problems adding domains or users through the ida.
specs: (all NT 4)
Messaging server 5.1
Admin Server 4.2
Directory Server 4.13
When trying to create a user for an existing(working) domain, the error message that comes up through the ida is this:
Status: CreateUser
Failed:
netscape.ldap.LDAPException: error result (1); Operations error
[Continue]
At that moment, the following error comes up in the ldap access log. The full cut is below. Any ideas why it won't enter the a user into the ldap database?
[17/Nov/2004:12:51:45 -0800] conn=134 op=28 ADD dn="uid=testing,ou=people,o=our.domain,o=our.domain"
[17/Nov/2004:12:51:45 -0800] conn=134 op=28 RESULT err=1 tag=105 nentries=0 etime=0
This is what happens when using 'imadmin user create':
D:\iPlanet\Server5\ndacli\bin>imadmin user create
Enter login ID: [email protected]
Enter login domain: our.domain
Enter iDA server port: 8080
Enter login password: ****
Enter iDA server host name: chinook.our.domain
Enter user's login ID: testbob
Enter user's first name: testbob
Enter user's last name: test-bob
Enter user's password: test
[email protected]: create user failed:
error result (1); Operations error
D:\iPlanet\Server5\ndacli\bin>
Thanks in advance for any help.
-Josh
Full cut from access log:
[17/Nov/2004:12:51:45 -0800] conn=127 op=25 BIND dn="uid=ServiceAdmin,ou=People,o=our.domain,o=our.domain" method=128 version=3
[17/Nov/2004:12:51:45 -0800] conn=127 op=25 RESULT err=0 tag=97 nentries=0 etime=0
[17/Nov/2004:12:51:45 -0800] conn=127 op=26 BIND dn="" method=128 version=3
[17/Nov/2004:12:51:45 -0800] conn=127 op=26 RESULT err=0 tag=97 nentries=0 etime=0
[17/Nov/2004:12:51:45 -0800] conn=129 op=24 BIND dn="uid=NDAUser,ou=config,o=our.domain" method=128 version=3
[17/Nov/2004:12:51:45 -0800] conn=129 op=24 RESULT err=0 tag=97 nentries=0 etime=0
[17/Nov/2004:12:51:45 -0800] conn=129 op=25 SRCH base="dc=ca,o=internet" scope=0 filter="(|(objectclass=*)(objectclass=ldapsubentry))"
[17/Nov/2004:12:51:45 -0800] conn=129 op=25 RESULT err=0 tag=101 nentries=1 etime=0
[17/Nov/2004:12:51:45 -0800] conn=125 op=28 BIND dn="uid=NDAUser,ou=config,o=our.domain" method=128 version=3
[17/Nov/2004:12:51:45 -0800] conn=125 op=28 RESULT err=0 tag=97 nentries=0 etime=0
[17/Nov/2004:12:51:45 -0800] conn=125 op=29 SRCH base="o=our.domain" scope=0 filter="(objectclass=*)"
[17/Nov/2004:12:51:45 -0800] conn=125 op=29 RESULT err=0 tag=101 nentries=1 etime=0
[17/Nov/2004:12:51:45 -0800] conn=125 op=30 BIND dn="" method=128 version=3
[17/Nov/2004:12:51:45 -0800] conn=125 op=30 RESULT err=0 tag=97 nentries=0 etime=0
[17/Nov/2004:12:51:45 -0800] conn=129 op=26 SRCH base="dc=bc,dc=ca,o=internet" scope=0 filter="(|(objectclass=*)(objectclass=ldapsubentry))"
[17/Nov/2004:12:51:45 -0800] conn=129 op=26 RESULT err=0 tag=101 nentries=1 etime=0
[17/Nov/2004:12:51:45 -0800] conn=130 op=39 BIND dn="uid=NDAUser,ou=config,o=our.domain" method=128 version=3
[17/Nov/2004:12:51:45 -0800] conn=130 op=39 RESULT err=0 tag=97 nentries=0 etime=0
[17/Nov/2004:12:51:45 -0800] conn=130 op=40 SRCH base="o=our.domain" scope=0 filter="(objectclass=*)"
[17/Nov/2004:12:51:45 -0800] conn=130 op=40 RESULT err=0 tag=101 nentries=1 etime=0
[17/Nov/2004:12:51:45 -0800] conn=130 op=41 BIND dn="" method=128 version=3
[17/Nov/2004:12:51:45 -0800] conn=130 op=41 RESULT err=0 tag=97 nentries=0 etime=0
[17/Nov/2004:12:51:45 -0800] conn=129 op=27 SRCH base="dc=ca,o=internet" scope=0 filter="(|(objectclass=*)(objectclass=ldapsubentry))"
[17/Nov/2004:12:51:45 -0800] conn=129 op=27 RESULT err=0 tag=101 nentries=1 etime=0
[17/Nov/2004:12:51:45 -0800] conn=126 op=25 BIND dn="uid=NDAUser,ou=config,o=our.domain" method=128 version=3
[17/Nov/2004:12:51:45 -0800] conn=126 op=25 RESULT err=0 tag=97 nentries=0 etime=0
[17/Nov/2004:12:51:45 -0800] conn=126 op=26 SRCH base="o=our.domain" scope=0 filter="(objectclass=*)"
[17/Nov/2004:12:51:45 -0800] conn=126 op=26 RESULT err=0 tag=101 nentries=1 etime=0
[17/Nov/2004:12:51:45 -0800] conn=126 op=27 BIND dn="" method=128 version=3
[17/Nov/2004:12:51:45 -0800] conn=126 op=27 RESULT err=0 tag=97 nentries=0 etime=0
[17/Nov/2004:12:51:45 -0800] conn=129 op=28 SRCH base="dc=bc,dc=ca,o=internet" scope=0 filter="(|(objectclass=*)(objectclass=ldapsubentry))"
[17/Nov/2004:12:51:45 -0800] conn=129 op=28 RESULT err=0 tag=101 nentries=1 etime=0
[17/Nov/2004:12:51:45 -0800] conn=131 op=24 BIND dn="uid=NDAUser,ou=config,o=our.domain" method=128 version=3
[17/Nov/2004:12:51:45 -0800] conn=131 op=24 RESULT err=0 tag=97 nentries=0 etime=0
[17/Nov/2004:12:51:45 -0800] conn=131 op=25 SRCH base="o=our.domain" scope=0 filter="(objectclass=*)"
[17/Nov/2004:12:51:45 -0800] conn=131 op=25 RESULT err=0 tag=101 nentries=1 etime=0
[17/Nov/2004:12:51:45 -0800] conn=131 op=26 BIND dn="" method=128 version=3
[17/Nov/2004:12:51:45 -0800] conn=131 op=26 RESULT err=0 tag=97 nentries=0 etime=0
[17/Nov/2004:12:51:45 -0800] conn=129 op=29 SRCH base="o=our.domain,o=our.domain" scope=0 filter="(|(objectclass=*)(objectclass=ldapsubentry))"
[17/Nov/2004:12:51:45 -0800] conn=129 op=29 RESULT err=0 tag=101 nentries=1 etime=0
[17/Nov/2004:12:51:45 -0800] conn=129 op=30 BIND dn="" method=128 version=3
[17/Nov/2004:12:51:45 -0800] conn=129 op=30 RESULT err=0 tag=97 nentries=0 etime=0
[17/Nov/2004:12:51:45 -0800] conn=134 op=24 BIND dn="uid=ServiceAdmin,ou=People,o=our.domain,o=our.domain" method=128 version=3
[17/Nov/2004:12:51:45 -0800] conn=134 op=24 RESULT err=0 tag=97 nentries=0 etime=0
[17/Nov/2004:12:51:45 -0800] conn=135 op=24 BIND dn="uid=NDAUser,ou=config,o=our.domain" method=128 version=3
[17/Nov/2004:12:51:45 -0800] conn=135 op=24 RESULT err=0 tag=97 nentries=0 etime=0
[17/Nov/2004:12:51:45 -0800] conn=135 op=25 SRCH base="dc=ais,dc=bc,dc=ca,o=internet" scope=0 filter="(objectclass=*)"
[17/Nov/2004:12:51:45 -0800] conn=135 op=25 RESULT err=0 tag=101 nentries=1 etime=0
[17/Nov/2004:12:51:45 -0800] conn=135 op=26 BIND dn="" method=128 version=3
[17/Nov/2004:12:51:45 -0800] conn=135 op=26 RESULT err=0 tag=97 nentries=0 etime=0
[17/Nov/2004:12:51:45 -0800] conn=134 op=25 SRCH base="dc=ais,dc=bc,dc=ca,o=internet" scope=0 filter="(|(objectclass=*)(objectclass=ldapsubentry))"
[17/Nov/2004:12:51:45 -0800] conn=134 op=25 RESULT err=0 tag=101 nentries=1 etime=0
[17/Nov/2004:12:51:45 -0800] conn=134 op=26 SRCH base="o=our.domain" scope=2 filter="(|([email protected])([email protected]))"
[17/Nov/2004:12:51:45 -0800] conn=134 op=26 RESULT err=0 tag=101 nentries=0 etime=0
[17/Nov/2004:12:51:45 -0800] conn=134 op=27 SRCH base="o=our.domain" scope=2 filter="(|([email protected])([email protected]))"
[17/Nov/2004:12:51:45 -0800] conn=134 op=27 RESULT err=0 tag=101 nentries=0 etime=0
[17/Nov/2004:12:51:45 -0800] conn=134 op=28 ADD dn="uid=testing,ou=people,o=our.domain,o=our.domain"
[17/Nov/2004:12:51:45 -0800] conn=134 op=28 RESULT err=1 tag=105 nentries=0 etime=0
[17/Nov/2004:12:51:45 -0800] conn=134 op=29 BIND dn="" method=128 version=3
[17/Nov/2004:12:51:45 -0800] conn=134 op=29 RESULT err=0 tag=97 nentries=0 etime=0

Well if I open the console and open the Directory Server, then click on the Database in the configuration tree, then the 'Settings' tab, the 'Make database read-only' box is not checked. I know this is the dumb-ass way of checking and I've learnt not to trust the console any more than a one-night stand in Bangkok, so how would I go about properly checking that it hasn't turned read-only on me?
The only changes that would have affected the acl in any way would have been recent admin password changes, but these have been reversed.

Termination in operation ERROR NEG YTD IN TCRT NOT ALLOWED

Hi Experts,
While running payroll error is coming
Termination in operation ERROR
20111308
UNE1********* < ERROR NEXTR A NEG YTD IN TCRT NOT A
Basic entry in IT :
It is happening for /4* WTs.
For such error cases when we were analysing , If any backdated change in tax authority might have updated . What is the solution to solve the same? is there any problem in processing classes of the wagetypes which we are using for payroll?
All replies are appreciable and will be rewarded too ,
Vinoli

Hi Vinoli,
This error usually is thrown when rates for tax authorities are not aligned between SAP and BSI. The BTXRATE table needs to be maintained on both SAP and BSI with the same rate for the tax authorities. Even if you are using the default rate on T5UTX, the BTXRATE table needs to be maintained in order for SAP to handle multiple states properly. Please also review the following notes:
522587 FAQ: How to change ceilings and tax rates within SAP
217027 DOC: Maintenance of BTXRATE and T5UTX tables
And in the wiki page:
http://wiki.sdn.sap.com/wiki/display/ERPHCM/ErrormessageUNE1ERRORNEG
YTDINTCRTNOT+ALLOWED
Another common cause is some customizing in payroll schema. Please try to run the payroll with a standard schema and check if the issue persists.
Kind regards,
Felipe

HCM Interactive forms - operation error while applying usage rights

Hi!
We have setup several scenarios using the new HCM Interactive forms on ERP6.0 and EP7.0. The scenarios include things like Transfer, pay change request.
In 9 out of 10 cases everything thing is working as expected so that the users can complete the forms and the process for their requests but occasionally we are seeing a random error that occurs for any user at any time without any apparent pattern.
The below is what is seen from the log file
Exception Stack Trace:
com.adobe.ProcessingError: PDF operation error while applying usage rights to PDF: /tmp/adobewa_PEP_17116350/DM-6192899546130604164.dir/DM8253967776737558967.tmp
Specific error information:
this document is signed
     at com.adobe.ads.request.UsageRights.execute(Unknown Source)
     at com.adobe.BaseADSRequest.doWork(Unknown Source)
     at com.adobe.AdobeDocumentServicesWorker.execute(Unknown Source)
     at com.adobe.AdobeDocumentServicesEJB.processRequest(Unknown Source)
     at com.adobe.AdobeDocumentServicesEJB.rpData(Unknown Source)
     at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0_0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0_0.java:120)
     at sun.reflect.GeneratedMethodAccessor403.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:62)
     at java.lang.reflect.Method.invoke(Method.java:391)
     at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126)
     at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:157)
     at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:79)
     at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:92)
     at SoapServlet.doPost(SoapServlet.java:51)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:215)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.adobe.document.pdf.PDFOperationFailure: IDL:com/adobe/document/pdf/PDFOperationFailure:1.0
     at com.adobe.EJB_PDFAgent.linearize(Unknown Source)
     at com.adobe.EJB_PDFAgent.setUsageRights(Unknown Source)
     ... 30 more
I am in the processes of raising a message to SAP about this but was wondering if any one else had experienced a similar error or knows what might cause this type of error.
Thanks
Matt

We had the same problem. The fix is to get a unique ID for every form. Given below
Instructions to generate unique ID
1. Modify template
Edit your template via t-code SFP
-> goto Layout tab -> Adobe LiveCycle Designer will be started
-> Goto 'XML source' tab
in line2, you will find following entry
<?xfa generator="AdobeLiveCycleDesigner_V8.0_SAP" APIVersion="2.5.8227.0"?>
<xdp:xdp xmlns:xdp="http://ns.adobe.com/xdp/" timeStamp="2008-09-11T14:
39:44Z" uuid="4ed773ff-6aeb-483e-a5ec-4af1a138c775">
from this line, delete uuid="..." part.
Go back to 'Design view' tab
Check if layout is not changed.
Save / activate template
2. Delete database table entry for table ADS_Licensed_forms
Schema SAP<SID>DB -> table ADS_LICENSED_FORMS
(you can delete all table entry from this table)
3. When you access the forms, they are aitomatically registered in this table.
Hope this helps.
Sunil

C3-00 opera error using wi-fi

Similar Messages

Maybe you are looking for