C3-01 fail to connect to WLAN

Hi
just unpacked C3-01, I can't connect to Wlan. I have wlan with WPA/WPA2 and router is 192.168.0.1.
I have tried the 63 char code several times, but end up with wrong security code
Any ideas ???
BR
Lars

If you read my post you would know that that is the main reason why I wrote the post. The OVI browser does not work It says: "Unable to connect to service. Try again later". This happens every time I try to connect with me standing literally 2 ft from my router.

Similar Messages

WLan fails to connect after sleep mode - Satellite T110-10x

Hi,
Everything works fine, wireless connected.
After sleep mode - it fails to connect although it detects my wireless network.
I've tried the latest Realtek driver, still no good.
I've verified that my setup is not to turn down wireless in the power options.
Any idea?

Hi
Where did you find the latest WLan driver?
Here on this Toshiba driver page you can find the latest Wlan driver:
http://aps2.toshiba-tro.de/wlan/
I recommend uninstalling firstly the old driver and then to install the newer version.
Furthermore its necessary to update the BIOS. I read in the forum that similar issues could be solved by BIOS update.
Greets

Cannot connect to wlan eap-peap athentication fail...

Hi all
I have A nokia N97 which I tried to connect to my work WLAN but I get eap-peap athentication failed. We do user a certificate which I have installed on the phone but it does not connect. It does not even promt for user name or password. I can connect to my home wireless which just ask for a security key which i enter and it works please please help.
Please help

I got it working please read my How to
/t5/Connectivity/How-to-connect-to-wlan-with-n97-using-ca-certificate/td-p/659372

E72: Unable to connect to WLAN

Something weird is with my E72. I had been happily using the WLAN in my house for a few months now. Then yesterday it suddenly failed.
Unable to connect to the wlan. The default browser showed me "Unable to connect. WLAN not found" and "Unable to perform operation"
But during a WLAN scanning, I can clearly search my house WLAN showing me "2WIRE*** found".
E72 had really give me lots of problem. Hope this will be my last problem I encountered with my phone. Thank is advance for any suggestion for this problem.

Try with Hard Reset (shift+space+backspace+on/off). Make a full backup before!
Cheers
Einar

Apex fails to connect after rebooting XE

Hi:
My environment is Apex 4.0.0, Oracle XE 10.2.0, Apex default Gateway, Windows 2008 32 bit.
After I reboot the database, Apex fails to connect.
If I check the Apex port number, it lists 8080, as expected. (SELECT DBMS_XDB.GETHTTPPORT FROM DUAL;)
Look at the Oracle Listener status below after the reboot, notice the host value in line
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8080))(Presentation=HTTP)(Session=RAW))
When I reset the Apex port number to 8080, I can then connect OK (EXEC DBMS_XDB.SETHTTPPORT(8080); )
Look at value of HOST in the Oracle Listener status below after the reset, the HOST lists the Server Name.
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=galapp13.bsci.bossci.com)(PORT=8080))(Presentation=HTTP)(Session=RAW))
This is a major problem, because if the Server is rebooted, nobody can connect to Apex.
I assume this is an Oracle Listener problem.
I have made no changes to the LISTENER.ora file, see values below.
Any suggestions on how to overcome this problem will be helpful.
Status of Oracle Listener after a reboot.
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
Start Date 02-JUN-2011 09:03:47
Uptime 42 days 22 hr. 31 min. 5 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File D:\oraclexe\app\oracle\product\10.2.0\server\network\admin\listener.ora
Listener Log File D:\oraclexe\app\oracle\product\10.2.0\server\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=galapp13.bsci.bossci.com)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8080))(Presentation=HTTP)(Session=RAW))
Status of Listener after resetting the Port number to 8080, notice the HOST = a ServerName in line:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=galapp13.bsci.bossci.com)(PORT=8080))(Presentation=HTTP)(Session=RAW))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
Start Date 02-JUN-2011 09:03:47
Uptime 42 days 22 hr. 34 min. 40 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File D:\oraclexe\app\oracle\product\10.2.0\server\network\admin\listener.ora
Listener Log File D:\oraclexe\app\oracle\product\10.2.0\server\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=galapp13.bsci.bossci.com)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=galapp13.bsci.bossci.com)(PORT=8080))(Presentation=HTTP)(Session=RAW))
The parameters in LISTENER.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = D:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(ADDRESS = (PROTOCOL = TCP)(HOST = galapp13.bsci.bossci.com)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)

Hi
Where did you find the latest WLan driver?
Here on this Toshiba driver page you can find the latest Wlan driver:
http://aps2.toshiba-tro.de/wlan/
I recommend uninstalling firstly the old driver and then to install the newer version.
Furthermore its necessary to update the BIOS. I read in the forum that similar issues could be solved by BIOS update.
Greets

IPad fails to connect to WiFi after OTA update to iOS 6

After the OTA update to iOS 6 my new iPad fails to connect to my WiFi network at home. My LANCOM router reports the following issue:
Index: 62294
Zeit: 19.09.2012 21:08:28
Interface: WLAN-1
Ereignis: Rejected Association from WLAN station xx:xx:xx:xx:xx:xx []: ()
Adresse: xxxxxxxxxxxx
Grund: Cannot support all requested capabilities in Capability Information field
It has worked flawlessly in the past with iOS 5 on my new iPad and iPhone 4. At the moment I hestitate to update my iPhone too.
Anyone with the same issue or an idea how to fix it?
Thanks in advance, greetings from Stuttgart (Germany),
Jens

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

After updating to Itunes 8.2.1 Itunes fails to connect to all remote airp.

I have 2 airport express, used as remote speakers. Since the last update, both airport express fail to connect with Itunes. I have checked the firmwares, all have the latest firmwareupdate. My firewall allows connections for itunes. I have reinstalled the firmwares, but nothing helps. I still get the error -15000, -15006 and -3256.
Is there a solution? All worked fine before the newest Itunes Update.

My Airport Express doesn`t disappear anymore from Airport Utility after changing my WLAN Router from WPA2 to WPA.
Then I also followed these steps and everything`s fine again:
http://discussions.apple.com/thread.jspa?messageID=9999160#9999160

I have an epson xp600 and a mac book pro. Wireless printing is OK if I'm lucky for one time only then a 'failed to connect' message so I have to delete and re add the printer to get it working again (but just once!) then the same occurs. Why?

I have an epson xp600 and a mac book pro. Wireless printing is OK if I'm lucky for one time only then a 'failed to connect' message so I have to delete and re add the printer to get it working again (but just once!) then the same occurs. Why?

I am not certain this will fix your problem but I suggest you assign the printer a static IP address.
Using the printer's front panel, select Menu > Network > WLAN > TCP/IP > Boot method, and change it to "static". Provide a static IP address that is on your LAN's subnet.
For example, if you are using an AirPort Extreme, you might give it an IP address of 10.0.1.100. If you are using a Netgear or Linksys router that defaults to issuing 192.168.x.x addresses, you might give it an address of 192.168.1.100. That way, the printer will always "reside at the same address" on your network. If your router has the ability, you should reserve that address so that the router does not attempt to assign it to another DHCP device.
Then, go to System Preferences > Print & Scan, and delete your existing printer with the "–" (minus) button. Add it again, using the "+" (plus) button. In the window that appears, select the IP pane, and from the Protocol menu select "Line Printer Daemon (LPD)". In the Address field type the IP address you gave your printer.
If all goes well the "Pring Using" field will detect the printer at that address and automatically select the appropriate driver. You will see something similar to the following screenshot ("name" can be whatever you decide, and "location" is optional):
Click Add, then you can close System Preferences.
There are other possible reasons your printer is "not responding" which could include wireless interference from competing wireless networks, but try this "static IP" method first. It should mitigate the problem.

Satellite A500-03P: Cannot connect to WLan using Win 7 + Event message

Hi all,
I very recently bought the Satellite A500 with the included offer of Windows7 when it was available end October 09.
So I got the DVD from Toshibe for the upgrade and followed the steps and upgraded from Visa home premium to Windows 7. I have two issues now.
1) I am getting a System Event Notification after start up, telling me about the system event log. The full message is below.
Failed to connect to a windows service
Windows could not connect to the System Event Notification Service service. This problem prevents limited users from logging on to the system. As an administrative user, you can review the System Event Log for details about why the service didn't respond
2) I was able to use this laptop for the internet PRIOR to the upgrade, both via a wireless USB drive as well at office via a modem ADSL.
Now I cannot access the internet after the Windows 7 upgarde!!
As an example the Optus dial up pop up box appears andwhen I click "connect" it does not connect.
Can anyone help please??
Thanks
C I

Hey buddy,
1)Have you checked the Service Configuration for this service? The start up type of System Event Notification Service must be always set to Automatic. This service is absolutely necessary for Windows and shouldnt be disabled or set to manual start type.
Check this!
2)To be honest I never heard about internet PRIOR but normally it should also be possible to access the Internet with Windows 7.
Make sure that the WLAN and/or LAN card is installed properly and check the TCP/IP settings. If you are missing some driver you can get it on the Toshiba page.

Failed to connect Error - Need Help, Please

I installed , created the simple "Hello" program and it ran fine on the simulator.
Then, I click the run OTA and now I'm in deep yogurt!
I get the message:
*** Error ***
Failed to connect to device 0!
Reason:
Emulator 0 terminated while waiting for it to register!
BUILD SUCCESSFUL (total time: 4 seconds)
I just want to restore things to what they were before I selected Run OTA. I've been reading for the past 3 hours and haven't found out to restore. I even deleted and re-installed but, still get the same meassge (probably some saved java pref file...). Anyway, HOW TO RESTORE to a virgin setup????
Thanks

... I read somewhere I need to reboot - I did and it took care of it.

Remote app on ipod fails to connect to itunes 10

After upgrading to iTunes 10, my remote app on the ipod touch 4G fails to connect. I've reauthorized, which times out most times, but eventually when it works, it only continues to connect to iTunes until I close and restart the program. I've disabled all firewalls and still have the issue. iTunes 10/iPod Touch 4G/iOS 4.1/ancient remote.app do not play well together.
Anyone else unable to get the remote app working reliably with this combination?

Hello all,
I would like to get more details from people who are still having trouble getting Remote 2.0.1 to connect. If you are unable to connect, please email me <[email protected]> with the following information:
- A detailed description of the specific issue you are seeing.
- What OS is on the host computer? (the one with iTunes on it)
- What OS is on the affected iOS device(s)?
- A description of your network topology. Please be as detailed as you can, including hardware and firmware versions, if possible. Also please explain how everything is connected.
- Is the base station running default settings, or do you have any non-standard settings enabled? If so, please elaborate.
- Do you have the built-in firewall enabled on the host computer?
- Do you have any other firewall or Internet protection (anti-virus, etc) installed on the host computer?
- Were you able to connect with versions of Remote prior to 2.0?
- If you have multiple computers, can you get Remote to connect to any of them?
- Does Home Sharing work between computers on your network?
- Do you see any messages in Console (in Applications/Utilities) on the host computer that seem to coincide with the connection failures?
Thanks,
Roy
<[email protected]>

My iphone 5 won't make a call when i fail to connect to the internet via 3g

My iphone 5 won't call when i fail to connect to the internet via 3g.
At work i dont have wifi i have 3g, if i launch say the sky go app,or the iplayer, sometimes they work and everything is fine...sometimes they wont load as 3g for whatever reason cant get a connection at that particular time........ if i then try and make a call the call will fail. I've experimented 25 + times and this is definately the cause.
(note: when the 3g connection does work, the phone has absolutely no problem calling people)
Anyone had this problem?
Even better has anyone got a solution?
Thanks,
Nick.

Are you sure that the carrier's signal is strong where you are having this problem? Certain building structures and locations have poor cellular signal strength and this often results in the "No Service" indication. Are other users able to get service in the same locations where you have problems?

On Windows 2012 Terminal Server Outlook fails to connect to Exchange 2013

I have a new install of Windows 2012.  I have two physical servers. One is a W2012 std Domain Controller ("DC"). The Second is configured as W2012 HyperV  ("HV"). Under HV I have
two VMs. One VM is W2012/Exchange 2013 ("ExchVM) and the other is W2012/Terminal Server ("VMTS"). All systems are behind a firewall appliance. Exchange is working via Outlook and OWA internally and externally. The self
created SSL must be installed manually on external machines since it comes up as an untrusted certificate. Once installed remote outlook works and OWA works. I have configured the terminal server and I am able
to login remotely as various users under my "TS group". The problem is when ever I attempt to open Outlook for the 1st time, it fails to connect to the exchange server.   (Open Outlook 2013, click next
on the splash screen, "Yes" Add an Email Account splash screen, click next, Auto Account screen populates NAME and Email Address correctly, click next, Searching for mail server settings..., check on establishing network connection, check on searching
for alias@ domain, then fails the logging on to the mail server) The error reads: "Outlook cannot log on. Verify you are connected to the network and are using the proper server and mailbox name. The
connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action."   I am connected in RDS from offsite, and from the RD session I can access shared folders on ExchVM and DC. I have
tried have verified the server Exchange server name is correct via "Get=ClientAccessServer" command. I have also tried to use the guid via "Get-Mailbox
ALIAS | fl name, exchangeguid. Keep in mind all desktop users on the network are connecting to Outlook without issue.
I would appreciate any thoughts on solving this issue.

Hi,
According to your workaround, it seems that the Outlook Anywhere configuration in Outlook client is not correct when using the Autodiscover service.
Once you connected to Exchange server by manually settings, please run Test E-mail AutoConfiguration tool in external Outlook client to check the autodiscover service:
open Outlook - press CTRL key - right click on the Outlook icon from right bottom corner taskbar - Test Email AutoConfiguration. Put your email address - uncheck use guessmart and secure guessmart authentication - click Test to check your Autodiscover service.
Please check the Log tab and confirm whether the Autodiscover service is connected successfully. Also confirm if the connection issue happens to all external users when they open Outlook for the 1st time. In Exchange server, please make sure
autodiscover.domain.com has been included in your Exchange certificate which is assigned with IIS service.
Regards,
Winnie Liang
TechNet Community Support

When trying to update the i phone " fault 1630" occurs - both when connected to WLAN or USB. What can I do?

When trying to update my i phone IOS 5.0 (connected by WLAN and USB to my computer) there is always "fault 1630" saying I`ve got no connection to the internet / network, which seems to be wrong to me (phone is online). What can I do?

C Mawle wrote:
Thanks. I have followed all the instructions as recommended and nothing has worked so it looks like the restore/update may have been interrupted - would loss of internet connection do this?
Yes it would, possibly even brick it.
Have successfully connected my ipod nano with iTunes so looks like the device driver is working.
Can I use my ipod nano USB connector to check?
It is not much help to you, since the device that you need still not recognized.
Anyway looks like I may have to swallow the loss of data. Have set-up a call for tomorrow with Apple support so will wait until after this before doing the factory restore!
Good luck, but if you expect miracle from that call good luck again.

My new i phone 5 wont sync with my laptop, keeps saying failed to connect to sync services. any help?

I just purchased a new i phone 5. when i go to connect with my laptop it says 'failed to connect to sync services, try again later' it shows my phone, and i can see my app screens, however it wont let me sync, back up or make changes. this is my first apple product, any help would be greatly appreciated.

Hello there, load dogg.
The following Knowledge Base article provides some in-depth steps to help troubleshoot the issue you are descibing:
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
http://support.apple.com/kb/ts2690
Thanks for reaching out to Apple Support Communities for answers to your question.
Cheers,
Pedro D.

C3-01 fail to connect to WLAN

Similar Messages

Maybe you are looking for