C3-01 Incoming Call Log Question

Is there a way to see calls that came in that you did not answer?  If you answer a call, the call is logged and you can access a complete list these by hitting the green button.  If however you received a call which you do not answer other than the initial call indication there does not seem to be a way to see the number who called you at a later time. 
Solved!
Go to Solution.

I didn't think they were there but perhaps they are.  Help me understand the various call indicators that appear to the far right. 
There is a blue up arrow which signifies outgoing calls. 
There is also a green downarrow which I think indicates outgoing call that I placed. 
The third indicator is see is a red hook shapped up arrow- are these incoming calls I did not answer?
Thanks for your help

Similar Messages

  • Expired number & Incoming calls log

    Hi,
    I wanted to know when exactly my old Skype number was expired and how can i get an incoming calls log for that number?
    Regards,

    found this solution in another thread...seems to have solved the issue.
    Here is the summary of the steps I took to correct the issue:
    1) Open the Phone and dial *228. This is a Verizon over-the-air programming number.
    2) When the system answer press 1 for "Program or activate your phone"
    3) Wait for the call to disconnect. You should get a prompt stating something like, "Settings updated."
    4) Open the Task Manager and kill the Phone, Message, and Contacts Applications
    5) Wait a few minutes (I waited 3 just to be extra safe)
    6) Open the Message App to verify the fix.
    If you are still broken, kill the Message App again, then reboot your phone.

  • Call log question

    There are a number of calls that I would like to be able to document that just say "UNAVAILABLE" in the "Call From" column in the Verizon Digital Voice call log available on the web site.  If I hover my mouse pointer over the call, it displays the number in a little balloon.  Is there any way to get it to always display the number of the incoming call?  I would also like to be able to export the log to a format that can be imported into a spreadsheet/database or even just into a plain text file. 

    Multiple calls with a particular contact are listed individually by selecting the right facing arrow.
    This cannot be changed.

  • Incoming call log- Australian calls?

    hi, I need to keep a record of all incoming calls over the year but have been advised the only way to do this is to purchase a specific app. The only call log app I can find is for US phone numbers only and i live in Australia. Any suggestions please?

    Your carrier keeps a record of all calls. Can you not login to your account online & view/print such? Some carriers, for an additional fee, will even mail such each month.

  • Is there a missed call log on the iphone5

    Is there a missed call log, an outgoing call log or an incoming call log on the iphone5?

    Tap on the phone icon, tap on recent, at the top it says ALL then MISSED.

  • Lost calls from the call log

    I have had a E90 now for more then a year and have been very happy with the phone/gps/camera oh whatever you want to call it except for 1 thing.
    It seems like the call logs clean themselves out. Initially I was told that it was a problem with the firmware but they have updated the firmware and I still have the problem. As it is if somebody calls me I maybe able to see the number in the incoming call log for a day or maybe 2 or sometime only an hour. I always thought that the outgoing log would store the last 20 dialed numbers and the last 10 incoming and missed calls but not on mine. If I call many numbers in a single day I may see up to 7 and in the receive log as much as 4 but then for no reason I would suddenly have an empty set of logs.
    Any idea how to fix that? I am on the latest firmware that shipped in Sept 2008.
    Thanks in advance

    Yes, on the device select the number you want to add, then in the bottom left on your key board press the menu button. Then tap on add contact and you should get a pop up to add the phone number to a contact as a new, add to existing, or cancel.

  • Call Log Problems and Questions

    I've owned this phone since late June, 2011 and overall like it.  I came from a BB with "real" keys, but have been pleased with eth learning curve for the swype keyboard (except it's insistence on some nonsense words).
    The real issue I'm facing: The Call Log
    First off, it's painfully slow when compared to my old BB.  If I want to call a recent contact I click over to the log, but have to first WAIT for the phone app to start, and then WAIT for the log to come up, then painfully WAIT to scroll, and then WAIT for that call to load the WAIT to FINALLY get a "Call" button.  Why in the world is this fairly "native" app so frikkin slow.  This is, after all, a phone.
    Second: Why is the call log not threaded?  I haven’t had an unthreaded call log in about 10 years.  My wife calls a lot, but I should have 15 line items of her before the next distinct caller.  When will this be fixed?  Seems a major flaw
    Third, why can't I choose which phone screen comes up first when i click "Phone" from the immovable home screen buttons?  How often are users dialing numbers that are A-not in their call log or B-not a contact?  Speaking of Contacts:
    Fourth: Why is the contact search SO slow?  I typed my last name in (so it should be finding only my family - maybe 10 contacts) and it took 8 seconds.  Again, comparing to the BB, which had a list ready (from the exact same list of contacts) with every keystroke.
    So, four problems.  May I please have four answers?
    Now one for which I can foresee the answer:
    How can I get rid of all the bloatware on the phone?  I don’t want:
    AllShare
    Amazon Kindle
    V Apps
    Backup asst.
    Bitbop
    Blockbuster
    Guided Tour
    IM
    Latitude
    Lets Golf
    Media Hub
    Rhapsody
    Navigation
    Places
    Rock Band
    Slacker
    Tune Wiki
    VCast
    VZ Navigator
    Nice job filling my new $300 phone with $0.02 crap

    I cannot answer your questions with what I consider an effective answer.  With that said are you aware that you can create groups in your contact list.  The is easiest done on the computer from the Google Voice app.  I have a group for my family, wife's family, coworkers, friends, doctors, restaurants, etc.  It is much easier to find someone in a small group.  I also have direct dial shortcuts on one of my home screens.  I have one home screen dedicated to direct dial shortcuts.  For those that I call all the time like my wife and home you touch the icon and it dials immediately.  To do this long tap an open space on a home screen, click on shortcut, click on direct dial or direct message for quick texting.  You can also have a direct shortcut to the actual contact if you frequently need to access the contact information.
    I hope this at least helps you enjoy the phone a little better if you were not aware of these features.  And yes, I wish the bloatware would go away.
    BTW the 4 buttons at the bottom (not the hard buttons) are movable.  You have to long press them to change them out. 

  • 2 questions call log n media card

    I hav a 8300 curve and new to it I tried a lot but didn't find a way to open my downloaded zip file. Infact I don't know how can I view it ihave stored it on my media card. Also I can't check my call history folder how can I acess the same. Need help urgently Regards Afzal

    Hi and welcome to the forums!
    You cannot unzip files on the curve unless you use a utility like ziplorer.
    Call logs can be accessed by pressing the call log icon. I have attached a screen
    shot.
    Thanks,
    Bifocals
    Please remember to resolve your thread.
    Put the check mark in the green box that contained your answer! Thanks   
    http://www.blackberryinsight.com/2008/04/12/howto-zip-and-unzip-files-on-your-blackberry/
    Icon
    Message Edited by Bifocals on 01-04-2009 07:22 AM
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Question on call logs?

    On my bb storm in recent call logs there is one heading only for each contact I called and if you want you can view history. On my x each ind. call is listed separately is there a way to eliminate this? I call my office a lot and it fills recent call logs.
    Thanks phaz

    Unfortunately the software on your DroidX is working as designed and is designed to list each call separately regardless if it's from the same contact.

  • 3rd party call log software questions

    Does anyone know of a Centro-compatible 3rd party call log manager that lets me delete/purge multiple entries at once, ie, something like each entry has a checkbox and if it's checked, you can select delete (or purge) and just those entries get removed? I guess I make a lot of phone calls, and it gets extremely cumbersome to delete/purge entries individually. I'd love to select multiple non-consecutive entries then be able to delete them all at once. Any suggestions?
    Thanks, Mike
    Post relates to: Centro (Sprint)

    I haven't seen any 3rd party programs that have the feature you are requesting. You can do an internet search to see if you can find one.
    For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
    http://kb.palm.com/SRVS/NUA/launchTab.asp?t=home&fn=centro&mn=centro&cn=sprint
    There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.
    Post relates to: Palm i705

  • %CALL_CONTROL-6-CALL_LOOP: The incoming call has a global identfier already present in the list of currently handled calls.

    000049: Oct 26 14:51:04.181: %VOICE_IEC-3-GW: H323: Internal Error (H323 Interwo
    rking Error): IEC=1.1.127.5.21.0 on callID 261 GUID=80316352D0FE011E02002302A5CC
    B8F9
    000050: Oct 26 15:24:50.315: %CALL_CONTROL-6-CALL_LOOP: The incoming call has a
    global identfier already present in the list of currently handled calls. It is b
    eing refused.
    000051: Oct 26 15:24:50.315: %VOICE_IEC-3-GW: CCAPI: Internal Error (Incoming lo
    op): IEC=1.1.180.1.28.0 on callID 0
    000052: Oct 26 15:24:50.315: %VOICE_IEC-3-GW: H323: Internal Error (H323 Interwo
    rking Error): IEC=1.1.127.5.21.0 on callID 363
    According to Cisco it says:
    It means that the voice gateway has detected a loop in the call route
    What debugs can I do to track this problem down.
    All dial peers are like this. They are all voip dial peers with different  destination-patterns and different session target IP addresses. No PSTN dial peers at all.
    dial-peer voice 30000 voip
    huntstop
    destination-pattern 3[01]...
    session target ipv4:192.168.99.4
    dtmf-relay h245-signal
    ip qos dscp cs5 media

    Q: How long has this system been in place - is it a new system, or is this something that just started on a system that has been in place for awhile? 
    A: My customer says to me that this system has been in place for nearly a year and the problem started only a couple of days ago.
    Q: If so were there any changes to the infrastructure, or the dialplan in particular?
    A: Again this is the first question I asked and he said “NO CHANGES”. But that is what most customer say – right?
    Q: Have you seen this occur in the past in the logs?  If so how often do you see it?
    A: Started on 26th Oct 2010. Since the problem started the router has been reloaded and the problem is still there. It is very intermittent and I have to do the debug when I get the problem.
    Q: Have you tried to establish what is causing these: H323: Internal Error (H323 Interworking Error)  ?
    A: Not sure how to troubleshoot this. The explanation of this message on CCO is not that great.

  • How to save History/Call Log permanently?

    I'm getting repeat calls from a telemarketer. I'm ready to sue them, and make a little money. My iPhone has this great feature: "Recents," that stores a list of all my recent calls, both incoming and outgoing.
    However, it only stores this info for 2 weeks, or the last 50 calls (unsure how many)
    Question: How can I permanently save that list/history of calls? How can I get that list of my recent calls?
    I would like to get that list as text, etc, so I can print it and take it court, as proof of the quantity of calls that the telemarketer called me. And the exact date and time of those calls.
    How can I save that call log of recent calls?
    I have an older iPhone 3, AT&T service, without a data plan.
    BTW; These calls do not show up on my monthly bill, because the calls now just go to voice mail. AT&T does not charge me for calls I don't answer, and they don't put them on the bill.
    Thank you,
    Larry

    There no way to save them permanetly on the phone.
    I was going to suggest showing your monthly bill but you already answered that.
    The only thing I can think of is to take a screen shot of your recent calls and email it to yourself.

  • Unknown "cisco" incoming calls

    Hi,
     anyone here who can assist me with this? we have a C40 endpoint whose configured using NAT. the issue is that we are getting an incoming calls from unknown "cisco" regardless if we are engaged in a call or not. when we checked the history, there is no logs saved.
    by the way, the unit is configured using NAT. but we tried to remove the NAT settings so the Endpoint is only transparent within the network. but still we are getting the same issue. unknown "cisco" still can call our end point.
    the endpoint is not registered to any GK or SIP server. anyone can assist me with this?
    thanks!

    This is a known issue, suggest you take a look at these:
    https://supportforums.cisco.com/discussion/12340591/nuisance-h323-calls-sx20
    https://supportforums.cisco.com/discussion/12336591/sourceh323idcisco-incomingcalls
    http://www.videonationsltd.co.uk/2014/11/h-323-cisco-spam-calls/
    In short, not much you can do, apart from either on your firewall, only allow incoming calls from trusted IP addresses, put the systems) behind a VCS etc or turn off auto-answer.
    /jens
    Please rate replies and mark question(s) as "answered" if applicable.

  • 2901 CME: Problem with incoming call via SIP Trunk

    Dear All,
    I have seen some others posted similar question regarding this but mine still doesn't work by using the reference solution.
    Mine is quite standard setup too -> CME setup on my 2901 router, analog phone attach to my FXS port my outgoing calls are working  fine via SIP but my incoming calls are not.  Caller only listen to engage tone and analog phone is not ringing at all. Attached with my config and trace log of ccsip messages. Kindly assist. Thank you so much.

    Hi Carlo,
    Here it is
    CME_2901#show sip-ua timers
    SIP UA Timer Values (millisecs unless noted)
    trying 500, expires 180000, connect 500, disconnect 500
    prack 500, rel1xx 500, notify 500, update 500
    refer 500, register 500, info 500, options 500, hold 2880 minutes
    , registrar-dns-cache 3600 seconds
    tcp/udp aging 5 minutes
    CME_2901#show sip-ua retry
    SIP UA Retry Values
    invite retry count = 6   response retry count = 6
    bye retry count    = 10  cancel retry count   = 10
    prack retry count  = 10  update retry count    = 6
    reliable 1xx count = 6   notify retry count   = 10
    refer retry count  = 10  register retry count = 6
    info retry count   = 6   subscribe retry count = 6
    options retry count = 6
    CME_2901#show sip-ua min-se
    SIP UA MIN-SE Value (seconds)
    Min-SE: 1800

  • 8130 Pearl - Call Log & Messages disappearing!

    I have had this phone for about a year, and this problem happens on and off, and I am finally sick of it. Texts, incoming.outgoing calls, email messages, even Facebook notifications on the FB app are all disappearing. The call log will disappear literally seconds after I make or receive a call. Same with emails and texts. What is casuing this and please please help me fix it!!!
    Solved!
    Go to Solution.

    That's a pretty common question asked and answered here on this site:
    First thing? Check the File Free at Options > Status, what is the number at File Free?
    Now, remove the battery of your device, hold a minute, replace and reboot. What is the File Free now?
    Read this: http://www.blackberryforums.com/general-blackberry-discussion/116396-managing-your-bb-memory-lost-ca...
    And this: http://www.blackberryforums.com/general-blackberry-discussion/112029-losing-call-logs-sms-emails-opt...
    Additional links to read:
    http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB15345&sliceId=SAL_Pub...
    http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB14320&sliceId=SAL_Pub...
    http://www.blackberry.com/btsc/dynamickc.do?externalId=KB14213&sliceId=SAL_Public&command=show&forwa...
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for

  • One of the USB ports on MacBook Pro does not work.

    Hi, I purchased a MacBook Pro in Jan '11. Both the USB ports on the laptop were working fine. Recently, I have noticed, any external device connected to the USB port, towards the battery side does not recognize the connection. Any solutions ?. Is thi

  • CS3 + Win 7 64 + Quad Core = Rendering nightmare

    I really need some help here. I installed Win 7 Ultimate 64 with 8 GB ram and a Q6600 quad core processor. I have a WD Caviar black 7200 RPM HD with 32 meg buffer as my OS drive and two WD 7200 160 GB HDs in RAID 0 as a video drive. Im also using a E

  • Copy and paste html code

    When i paste and copy the html code (web widget- snipet) from ebay to my iweb site it converts the price from uk £'s into US $'s. How can i stop this. thanks paul

  • Add child to root (PL/SQL PARSER) Oracle 8.1.7

    Hi all, i have two dom documents, i need to add to the root of the first one a subtree of the second one. Could someone give me an example of how to do that ? Thanks.

  • How to display report vertically

    Hi. I want to display a report vertically. I mean heading of the report should come vertical and its records should also come vertical. I am using alv. Please help me.