C3-01: Still calender feature missing

Hello!
When a reminder on a calender topic is shown on the display, it is only possible to say "Later" or "Show".
It would be fabulous, if it would be possible either to set a different "later"-time (propose 10 Minute and give possibility to change to e.g. 2:00 or 24:00) or to give a possibility to EDIT the shown calender item to set a new reminding time or day.
This feature would really help very much and would by a minimum coding effort - where can I place such inputs?
The calender of S40 is THE BEST OF ALL  - for me it is the reference of ALL CALENDERS! No other manufacturer gives such a calender, I tried iPhone, Samsung and Sony.
Best regards,
Schlaumy
Schlaumy
"Two beer or not two beer?"

Hi Schlaumy,
I'm afraid we cannot advise you on coding the software because it may cause harm to your device and the information stored within it.
Regards,
haZey
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Similar Messages

  • CUCM 8.6 VPN Advance Feature Missing

    As per the title, i have installed Cisco UCM 8.6. I am deploying SSL VPN on the router and Cisco IP-Phones as SSL client to be connected to CUCM.
    I cannot find any VPN service/feature in CUCM 8.6 which i have recently installed. There is no VPN option under Advance features under CUCM OS administration. Also during issuer cert upload, there is no Phone-VPN-Trust.
    Either i am missing a license feature here or might be some thing to do with Demo. Can one kindly assist me this .Regards.

    Thnx for the prompt response. Can you kindly tell me how to find out whether its restricted or not.
    I am just saying its going to support 15 VoIP phone as i have not installed the licenses. and what do u mean by HTH and Java?
    I cannot find any other feature missing from CUCM other than VPN

  • Replaced font still appearing in missing fonts

    Hi All,
    In my FrameMaker template I was missing a font called "Palatino". I changed the font in the template to another font that is available with me.
    I changed the font in every Paragraph tag and Character tag in the template. And did Global Update. I double checked everything.
    I did it manually in one of the files and imported to the other files.
    But in some of the book files, I am still getting the missing font alert for "Palatino". It is a mystry for me, where I am leaving some track of the old font. I am 100% sure the font do not appear in any of the Paragraph tags and Character tags in the template
    Is there a way I can search for that font in the book files.
    Please let me know. I quick help will be highly appreaciated.
    Regards,
    Com

    Hi,
    Font info is also stored here:
    Stored table tags or in a deleted table title
    In a left/right master page, if your document is single sided and you had deleted the master page of the other side
    Master pages
    Reference pages
    Graphics files
    You can also open the MIF file (preferably with MIFBrowse: http://www.grahamwideman.com/gw/tech/framemaker/mifbrowse.htm or in another text editor) and search for the font name.
    Or you can deactivate "Remember missing font names" in the Preferences and then open your file. FrameMaker will permanently replace Palatino with another font. Only if the font is used by a graphics file, FrameMaker will still try to find this font.
    Best regards
    Winfried

  • I moved my FCP events and projects folder onto my external hard drive and now everything is gone on FCP.  When I tried to reload those folders onto FCP nothing happened.  I still get the missing files image.

    I moved my FCP events and projects folder onto my external hard drive and now everything is gone on FCP.  When I tried to reload those folders onto FCP nothing happened.  I still get the missing files image.  When I try to import the folders manually something pops up that says it is incompatable.  It is possible to retrieve everything that was lost?

    "When I tried to reload those folders onto FCP nothing happened"
    Brownale6 how can  u reload folder in to FCP.
    As you said folders are moved to external disk but have you checked it should be like this
    For Event
    external disk>Final Cut Events>your event folder.  
    For project
    external disk>Final Cut Projects>your project folder.

  • Is it possible to develop tookit that provides features missing in profilel

    Hi,
    Is it possible to develop a toolkit that makes features missing in MIDP available to application developers? For eg, I want to develop a tookit targetted at the game developers.. how can i do this? any clues?
    Thanx
    Ruchika

    Thanx for the help.
    I undertsand that it is possible to write a toolkit on top of a profile, but is it possible to write a toolkit that sits at the same level as the profile... (for eg: some additional features) and allow the application to use features from both the profile and the custom toolkit?
    My best guess on this is that only the device manufacturers can do such a thing but i am not sure about this. Any clues?
    Thanx

  • E65 - basic features missing

    Just purchased an E65.
    Beautiful thing but there are so many useful features missing that I am used to in my old Nokia phones.
    1. Can't change font settings - there is only one fint and it is very small.
    2. Can't set repeat alarm.
    3. No smiley
    4. Can't cancel start up tone
    I can go on and on. I read that the software used for E65 is Simbian or something which is different from the one used for old Nokia phones, S60? The lack of basic but very useful features in the E65 has been very disaponting indeed
    Didn't Nokia test the phone for these basic features?
    What is Nokia's rationale for having these features removed?

    I can confirm that all the points you make are common to all the latest N- and E-series phones - which all run Symbian 60 3rd Edition.
    For the first problem, the only thing you can do is select a theme with high contrast .. or buy a magnifying glass.
    For the second, there are a number of 3rd party solutions that provide the sort of alarm functionality you're after. They're all very expensive for what they are though: I was looking at one yesterday until I realised it was US$20! I mean, US$5, OK, but US$20? For a daily alarm? Fuggedaboudit ..
    Don't know what you can do about the last two. I guess if you could find the Nokia start up sound file you could replace it with an empty file, but you'd need 3rd party tools and anyway, I doubt it can be done.

  • Important feature - missing?

    Re: 'How do I...' query below
    All Pro audio software applications that I have used so far allow enabling of an effect/plug-in at any given instance along a timeline, and then disable it again, by way of the bypass control (using an automation channel). But, under the controllable parameter options (drop-down list available in the effects column) in STP I can find no such option.
    Is this feature missing in STP? Is it handled differently? Surely you do not need a new track for every different effect you want to apply.
    My respect for any puzzle solver

    You might consider adding Buses.
    Here is an example:
    We shot a film inside a large, 1920's stone room. So I added a Bus called Echo. I then clicked on my dialgue tracks and clicked SEND to ECHO. Soundtrack will then play Track1 and the Bus at the same time. So I added EXTREME echo to my Echo Bus to give the illusion his voice echoes in speakers L, R, SR and SL. When ever we aren't in the large room, I take the volume of the Bus and drop it to zero. When we return to the room, I bring it back up to my default level.
    If you want an Alien sound, just create another Bus called Alien and send your tracks to that Bus.
    In this case, Track 1 has two Sends (Echo and Alien) and there are two busses, Echo and Alien. Whenever you want to add an effect, just bring up the volume on your bus.
    It's a pain to route, but it's better than adding the effects to each clip and then 'save as' RickVoice_A.aiff, RickVoice_B.aiff, and so on.
    Hope that helps

  • Script Error at launch since recent upgrade to CS6 & features missing

    After many failed attempts at getting all of the programs in CS6 Design Premium installed, I was finally able to with the help of the "Installing" forum.  Unfortunately I am still having problems with InDesign.  When launching I still get the script error:
    Error in C:\Program Files (x86)\Common Files\Adobe\Startup Scripts CS6\Flash\Flash-12.0.jsx
    Line 153: if( app.name = = flashAppname && (module.name = = 'DefaultScript' II module.name = = 'Flash'))
    Cannot open resource file.
    Also, I am still missing Effects features under the Object drop down menu. Any ideas?  I am able to open files that have "effects" in them, but am not able to edit the effects at all. I am hoping someone can help me out.  I have already ran a Adobe Support Advisor log and from what I have been told it checked out fine.  Here is the thread:http://forums.adobe.com/message/4727814#4727814

    While the log might not indicate a problem, I think the error message and missing effects pretty much says otherwise.
    I don't like to say this, especially since you had so much trouble getting this far, but I think you need to uninstall and reinstall, and I'd run the Clean script, befor the reinstall: CS Cleaner Tool for installation problems | CCM, CS6, CS5.5, CS5, CS4, CS3
    That said, though, I'd try a last-ditch effort at a repair first. Try running MSconfig and turn off all non-essential startups and services, which is pretty much anything non-microsoft. I leave my mouse driver running, but it isn't necessary. Be sure that you've turned off anti-virus and malware scanners, instant messengers, iTunes, and any brower helpers or toolbars. Reboot. If you wind up back in MSconfig, press cancel to continue in diagnostic mode.
    Run the installer. Wheter it would be best to uninstall ID, the reboot and run the installer again (still in diagnostic mode) to reinstall, or to just run a "repair" is probably a toss-up. I don't think eihter one is going to thoroughly clean the registry the way the cleaner tool does (but as far aas I know, that's gong to remove the entire package, not just ID, so we want to avoid it if possible). I'd probably try the reapir first, as it's faster and if it works, great. If not uninstall, reboot again, and reinstall.
    Once finished with the installer, run MSconfig again and check the "normal startup" box and reboot.

  • Features missing from iOS 5 (3GS)

    I upgraded to iOS 5 on my iPhone 3GS.
    I am missing two features that I did not think were reported to be missing on the 3GS with the iOS update.
    First - I am missing the option for a location based reminder. I have the option for a time-based reminder, but nothing for a location. Location services is on, but I do not have a listing under location services for the reminders app, to selectively toggle that. I am registered with iCloud as well. This seemed to affect it for other people (or so says google), but still does not give the option for location based reminders on my phone.
    Second - I do not have a listing for Earthquake alerts in my notification center settings. I know this is only available to people in Japan and I DO live in Japan. This iPhone 3GS was purchased in Japan and runs on the Softbank wireless network. I DO have it set to English as a system language (with various Japanese keyboards enabled), and if that is affecting the ability to natively receive Earthquake notices, I am really disappointed in Apple. I DID try switching my device's language to Japanese, but still did not have a toggle for Earthquake notifications.
    What gives? These are probably the two features I was looking forward to most, and I don't have them and I don't know why.

    I don't have a 3GS so don't know if the reminders feature is missing or not. But on my iPhone 4S it was missing until I turned on iCloud syncing for reminders. There is another discussion thread on this topic you should check out: https://discussions.apple.com/message/16335763#16335763.

  • Are any features "missing" in Premiere Elements v 10 - need to upgrade from v 9

    Hi!
    I need probably to upgrade my Elements v 9  to v 10 since I need 64 bits to get full use of the memory. My experience when upgrading to v 9.0 (from whatever?) was that a lot of features were missing. They still were found in the interface but "dimmed" meaning I couldn´t use them. I found that terribly annoying since I am a Premiere Elements user form the very early beginning.
    Do anyone know the difference between v 9 and v 10?
    Is it worth it regarding new features?
    Or do I lose some v 9.0 features?
    Is it worth it regarding prestanda or should I go on using v 9 and 32 bits applikation on my Windows 7 with 64 bits?
    Thanks!

    Thanks!
    Some releases ago you could dump still images from time line. I really miss that (Very useful while doing fancy subtitles or creating a web about same "project". ) . I think that feature is one of those that is "dimmed"( but right now my version 9.0 is not functioning at all so I cannot check it up _ i probably install v 10 later today),
    I also believe you could create a title template a few releases ago. It is really annoying not being able to do that (setting all titles by hand and postion them at same coordinates). I do not want to do that in Photoshop.
    (I have workéd with Adobe Premiere for about 12 years. Pro at the beginning - last 5-6 years Elements so perhaps my memory have hard to recall what relaser/program I used for what function. )

  • Missed calls - a missed call is shown on the screen when the phone is locked. I slide the icon an the phone calls the back to the missed number. The phone still show a missed no. It should clear the icon since I obviously noted the missed call. Any fixes?

    Ok, a wish for the next iOS release, just a small anoying thing.
    Scenario:
    I have a missed call, the screen is locked. The name of the caller shows up on the screen, I slide the phone icon and phone back.
    When I've ended the call there is still a notification of a missed call, i.e. the same missed call that I just called back. To clear the missed call red circle icon on the phone icon (in the unlocked state and the notification on the locked screen) I must open the missed call list. Then it clears.
    My wish is that the phone understands that it should clear that missed call after I returned the call since I have obviously noted it.
    -> Is this something apple will update or is there a setting that I could change?
    /Erik

    You have to return the call via the recent list or tap the red missed call entry in recent list otherwise even a hundred calls won't turn the balloon off.

  • Combine PDF feature missing from right click option Acrobat Pro 9/Windows 7

    I combine PDF's all day long and need this feature. I had it on my old computer and since moving over to the new computer I do not have the option to combine PDF's when right clicking on PDF documents. I have searched the forum and found other fixes, however none have worked, I have uninstalled and re-installed three times as well and no luck. Does anyone have any other ideas for fixes for this. I need this feature.....
    Message was edited by: chesty21

    Found this it worked for me :
    http://acrobatusers.com/forum/pdf-creation/right-click-option-combine-supported-files-miss ing a known issue caused by the context menu handler not being registered (tends to result from patches and installs when Windows UAC is active).
    It's
    From the Start menu, choose 'All Programs' > 'Accessories, and *right-click* on 'Command Prompt'Select 'Run as Administrator' and approve the UAC window (if one is displayed)
    If you have 64-bit Windows, in the command window type the following and press Enter, including the quotes:
    regsvr32 "C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat Elements\ContextMenu64.dll"
    On 32-bit Windows, type this instead:
    regsvr32 "C:\Program Files\Adobe\Acrobat 10.0\Acrobat Elements\ContextMenu.dll"
    You should see a message saying it was successful. Close the command prompt window, and your context menus should be back up and running. .

  • Why is the Edit and + feature missing in Contacts?

    Since updating my iPhone 4 to iOS 5 the "Edit" and "+" feature is missing from Contacts.

    Already tried that and it did not fix/repair the issue.  From other similar posts I gather it might be that the Contacts on my iPhone are ONLY on my iPhone.  I do not sync them with my home computer (no longer an option especially in that iCloud is not supporting Windows XP) and do not sync with my work computer because I prefer not to have 600 contacts on my iPhone.  The problem only appeared after updating to iOS 5, so I am surmising it has something to do with that and the features of or expectations that everyone will migrate to iClould.  Sort of BS if that is the case because it appears I am being given no choice but to upgrade my home computer to Windows 7 (or a Mac) and put everything on the cloud.

  • ASDoc, why are features missing in the SDK?

    I've been using ASDoc for a project of mine and I've been really trying to extract some of the functionality I see in Adobe's documentation. I've noticed that there is a lot of functionality that is either missing portions to work right, or disabled altogether. Is there a reason the full version of ASDoc is not included in the SDK?
    Some of the features I'm most concerned with is local search, being able to search my documentation without using LiveDocs. I noticed there is JavaScript setup to handle a local search, but you can't enable it. I hardcoded it on, but it then references a search.html which is not included in the templates or generated by Saxon or ASDoc, so i'm confused on where this is supposed to come from.
    Another big feature i'm curious about is setting a description for the overview.html page. This would be like settings comments for -package but at the Top level. there are a handful of references to overview.html in the templates, but again. Neither Saxon or ASDoc generate this. But if you go to Adobe's site, their overview.html page has the auto-generated footer so their version of ASDoc must generate the file.
    Other misc features I've stumbled across were conventions, appendixes, top level, @author, and @review. All which aren't enabled but work in some fashion or another.
    If i could just get those two main features enabled somehow it would be SUPER AWESOME. But at the least, why is all this functionality disabled/broken in the latest sdk?
    - gabriel

    Hi Gabriel,
    Features like local search etc are not available because no one has asked for them so far. Feel free to log an enhancement request at http://bugs.adobe.com/flex.
    The other request to set package description via overview.html seems similar to http://bugs.adobe.com/jira/browse/SDK-19755, currently you can do this via Overviews_Base.xml, but when the feature request is implemented you would be able to do it using a config option.
    >> Other misc features I've stumbled across were conventions, appendixes, top level, @author, and @review. All which aren't enabled but work in some >> fashion or another.
    This is intentional, so we can generate asdoc faster by avoiding extra transformation processing. The current asdoc tool targets the most common use cases. If you feel these are important to you, please log enhancement requests.
    Thanks,
    Gaurav Jain
    Flex SDK Team

  • Features missing from Adobe Connect 9, 16x9

    I saw a preview of Adobe Connect 9 at the Adobe Connect Federal User's Group meeting yesterday. Product looks great and well worth the trouble to upgrade. Unfortunately, two of my wish list items weren't addressed. For Adobe Connect 9, it's still a 4x3 world for video and for Share Pod presentation of PDFs (they can't fill the screen on a 16x9 display). The PDF issue is especially irritating, since it should be a really easy fix for Adobe. I work in an organization where bandwidth is a problem and 50-60" conference room displays and spreadsheets are popular, so I really need PDFs to fill the screen. I asked Peter Ryce to intercede, but I'll take any help I can get from any corner. Can someone at Adobe, or anywhere else, PLEASE produce a PDF viewer pod that will go full screen on a 16x9 display?

    You asked durrning Adobe's shutdown week, so the answer is slow in comming. As I recall, I had to log out and log back in for the new version 9 features to wake up, but it may have been a browser cookie issue. If you truly don't have Connect 9 (you can double check by mousing over the "Help" link on the login page and it will show your version of Connect), then you should call support at 800-945-9120.

Maybe you are looking for