C3 bugs and password, settings, system restore

hey does anyone know of any bugs for the c3. And how you can get them?
just want to know coz i want to be careful with my phone. also the system restore is not an option for me as i dont know the password. 
People have said the password is 12345 but that doesnt work for me and i have never changed it. If anyone has help with this please help.

Bugs generally means errors in the programming in an items firmware, operating system or even additional software, you cannot "get" them like a virus.
Sometimes (sic) these errors are not noticed at the manufacturers testing stage especially if the item is rushed to market.
When a phone is released to hundreds of thousands of users any errors or shortcomings soon turn up and the manufacturer releases updates to fix these.
To further complicate the matter network operators choose their own version of the operating system (usually with certain functionality/menus disabled and their own logos replacing the manufacturers.) and they decide what updates to release. (Usually none because the update would revert the phone to the manufacturers menu unless they paid for a bespoke update. And why should they bother, they have already got your money....)
Major bugs on the are C3:
1: When accessing the internet it does not always give you the option of whether to connect by wlan or gprs despite all settings being correct.
I thought i had this fixed after following advice on this forum, but after working for a day the problem came back despite the fact i have not changed anything. Go figure..
2: Probably related to the above. Sometimes remains connected via GPRS even though set to "as needed", meaning it should disconnect when you close the browser. (Mine even reconnects after restarting the phone.) Cost a fortune in data charges! I am going to pursue my operator for this(Tesco).
My phone is vers 04.45 There is an Nokia update for this phone which presumably fixes these bugs but my operator has not approved it so I'm stuck, if I take it back I'll get offered a replacement (it will have the same problem, no point) or a refund. Trouble is I really like this phone, (wifi for £70!!) if it worked as intended it would be a great phone. Come on Nokia, this is damaging your reputation, search your own boards, loads of people have these problems, what can we do!

Similar Messages

  • Not set userName and password in system.prefs for 2.2.5

    We are using KODO 2.2.5 right now and We have business requirement that we
    should not keep database user name and password in system.prefs. I
    followed the instructions that you wrote in Feb 12 2002 post. But it still
    has the error that exactly like Bug #76. When we leave the user name and
    password out of system.prefs, we get the error.
    Is this bug(#76) fixed for 2.2.5? And how can we work around it?
    The error is:
    java.sql.SQLException: invalid arguments in call
         at
    com.solarmetric.kodo.impl.jdbc.schema.SchemaTool.<init>(SchemaTool.java:99)
         at
    com.solarmetric.kodo.impl.jdbc.schema.DB.getPersistentTypes(DB.java:197)
         at
    com.solarmetric.kodo.impl.jdbc.JDBCPersistenceManagerFactory.loadPersistentTypes(JDBCPersistenceManagerFactory.java:313)
         at
    com.solarmetric.kodo.impl.jdbc.JDBCPersistenceManagerFactory.setup(JDBCPersistenceManagerFactory.java:288)
         at
    com.solarmetric.kodo.runtime.PersistenceManagerFactoryImpl.privateSetup(PersistenceManagerFactoryImpl.java:872)
         at
    com.solarmetric.kodo.runtime.PersistenceManagerFactoryImpl.getPersistenceManager(PersistenceManagerFactoryImpl.java:59)
         at com.sabre.apd.dao.JDOFactory.getPersistenceManager(JDOFactory.java:144)
         at com.sabre.apd.dao.JDODAO.<init>(JDODAO.java:33)
         at com.sabre.apd.dao.JDODAO.<init>(JDODAO.java:28)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at
    sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
         at
    sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
         at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
         at java.lang.Class.newInstance0(Class.java:296)
         at java.lang.Class.newInstance(Class.java:249)
         at
    com.sabre.apd.dao.ConfigurableFactory$Tool.makeObjectForClass(ConfigurableFactory.java:105)
         at
    com.sabre.apd.dao.ConfigurableFactory$Tool.make(ConfigurableFactory.java:81)
         at
    com.sabre.apd.dao.ConfigurableFactory$Tool.getToolObject(ConfigurableFactory.java:62)
         at
    com.sabre.apd.dao.ConfigurableFactory.getTool(ConfigurableFactory.java:236)
         at com.sabre.apd.dao.DAOFactory.newDAO(DAOFactory.java:101)
         at com.sabre.apd.dao.DAOFactory.newDAO(DAOFactory.java:87)
         at
    test.com.sabre.apd.core.ActualConnectionDetailBrokerTest.getDAO(ActualConnectionDetailBrokerTest.java:38)
         at
    test.com.sabre.apd.core.ActualConnectionDetailBrokerTest.tearDown(ActualConnectionDetailBrokerTest.java:43)
         at
    test.com.sabre.apd.core.ActualConnectionDetailBrokerTest.setUp(ActualConnectionDetailBrokerTest.java:32)
         at com.intellij.execution.a.br.main(br.java:12)
    Thanks
    Weidong

    I'm not sure about the status of that bug in 2.2.5, but it has been
    resolved in our internal 2.3 builds.
    I think that you can work around this problem by enumerating your
    persistent types in system.prefs instead of in the data store. See our
    documentation for more information on how to do this.
    Basically, if I recall correctly, the problem is when retrieving the
    list, but not when connecting to the data store for other purposes.
    -Fred
    Weidong <[email protected]> wrote:
    We are using KODO 2.2.5 right now and We have business requirement that we
    should not keep database user name and password in system.prefs. I
    followed the instructions that you wrote in Feb 12 2002 post. But it still
    has the error that exactly like Bug #76. When we leave the user name and
    password out of system.prefs, we get the error.
    Is this bug(#76) fixed for 2.2.5? And how can we work around it?--
    Fred Lucas
    SolarMetric Inc.
    202-595-2064 x1122
    http://www.solarmetric.com

  • HT5517 I want to photo stream pix from my iMac to apple tv. When I try to enter the iCloud account name and password, the systems tells me that terms of service have changed and won't let me proceed. What's that about.

    I want to photo stream pix from my iMac to apple tv. When I try to enter the iCloud account name and password, the systems tells me that terms of service have changed and won't let me proceed. What's that about?

    You need to reset the password for the "old" account, and then use that to turn off iCloud.  Then you will be able to sign in with your new ID.
    You can reset your password at iForgot.apple.com.
    If you don't know the answers to the security questions, you will need to start there.
    http://support.apple.com/kb/HT5312
    -If you established a rescue email address, there will be a link on the "Passwords & Security" page of id.apple.com.  Clicking the link will send the reset to your rescue email address (NOTE:  This is not the same address as your Apple ID email)
    -If there is no link on the page, then you didn't establish a rescue email address.  Contact AppleCare at 800.694.7466 (If you are in the US), and ask for account security.  You will need to answer some questions to verify your identity, AND you will need access to a computer to generate a temporary support pin.
    -If you are not in the US, click http://support.apple.com/kb/HT5699 - Apple ID: Contacting Apple for help with Apple ID account security
    HTH

  • I have a pc with windows 7 professional.  I use adobe cs6 production suite and all of a sudden premiere pro stopped working.  I had installed a program recently and created a system restore point prior to it's installation.  I installed Zaxwerks proanimat

    I have a pc with windows 7 professional.  I use adobe cs6 production suite and all of a sudden premiere pro stopped working.  I had installed a program recently and created a system restore point prior to it's installation.  I installed Zaxwerks proanimator 5.1.  Restored computer back and I now get an error when trying to run any cs6 program it is a configuration error and it says to uninstall and reinstall.Won't uninstall says I have an error 1.  What should I do?

    clean and then reinstall, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • Is There a Public "Bug and Issue Management System" for Strobe Media Playback?

    HI all,
    Is there a public "Bug and Issue Management System" for Strobe Media Playback?  Or is this forum the only officially supported public mechanism for SMP bug reporting and feature requests?
    (fyi, I ask in part because SMP is built on top of OSMF, and both projects are led by development teams at Adobe.  The OSMF project, however, has fuller level of support including "Bug and Issue Management System" here:
    https://bugs.adobe.com/jira/browse/FM   )
    Thank you to all of the SMP team for this great player!
    Best regards,
    g

    Hi Greg,
    Here is our public bug and issue management page:
    http://bugs.adobe.com/jira/browse/ST
    Thanks for your interest in Strobe Media Playback and for your great articles!
    -Andrian

  • Why don't the options to not check if Firefox is the default browser, set the homepage to a blank page, and password settings hold?

    Why don't the options to not check if Firefox is the default browser, set the homepage to a blank page, and password settings hold? It opens to a firefox page and asks if I want to make firefox the default and has the checkbox checked to check for default with every launching.
    Just updated to Firefox ESR 24.6.0

    This article lists a number of possible reasons that Firefox might be unable to save your preference changes during your session, or that they might be overridden at startup: [[How to fix preferences that won't save]].
    Another common issue is a feature of security or utility software that protects you from unwanted browser settings changes by reverting them back to an earlier state. For example, Advanced SystemCare's Surfing Protection feature can do this. You may need to turn off such features, if you have them, in order to keep your changes.

  • Real Time Clock Error - Check Date and Time settings, System CMOS Checksum bad

    Hello everybody,
    Can help anyone to resolve my problem.
    I have an Thinkpad W520 (42823FG), BIOS 8BET60WW 1.4        When I disconect AC power and remove battery and connect again, I see this message on screen:
    "Real Time Clock Error - Check Date and Time settings, System CMOS Checksum bad
    Press Esc to continue or F1 to enter Setup"
    Is this a system board problem or CMOS battery problem ?
    Thank you

    Hello and welcome,
    It's probably (hopefully) just the CMOS battery.  The easiest way to find out is to just replace that battery.
    Page 85 of the Hardware Maintenance Manual:
    Hardware Maintenance Manual
    Here's an example of the battery.  I'm not recommending (or not) this vendor:
    http://www.ebay.com/itm/New-Lenovo-ThinkPad-W500-W510-W520-W530-W700-W701-W701ds-CMOS-RTC-Backup-BAT...
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • How to recover hp pre-installed games and office after system restore for HP Mini 210-4127se?

    how to recover hp pre-installed games and office after system restore for HP Mini 210-4127se?

    Hi,
    You can reinstall them from Recovery Manager by clicking on Start=> All Programs.
    If you have performed a complete HP Recovery using F11 then all the software should be there. If you have performed a minimized recovery then you can install applications from recovery manager...If none of these works then you'll need USB recovery..
    Here are the links that will guide you through the process:
    Using Recovery Manager to Restore Software and Drivers (Windows 7)
    Performing an HP System Recovery (Windows 7)
    Order USB Recovery
    Note:
    If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
    Although I am an HP employee, I am speaking for myself and not for HP.
    **Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

  • Driver Problems - and unable to system restore

    Hello!
    I'm running Windows 8.1 on a Lenovo 20236 (x64) laptop, which until a few days ago, was running perfectly (and very quietly!)
    However, after installing the on disc software that came with a 360 wireless receiver http://www.amazon.co.uk/747400-Wireless-Gaming-Receiver-Microsoft/dp/B0076GYM50/ref=sr_1_4?ie=UTF8&qid=1428828583&sr=8-4&keywords=wireless+360+controller+pc
    My computer encountered numerous problems (including a case of IRQL NOT LESS OR EQUAL, and numerous driver malfunctions) so I read the review page for the product, which is essentially a warning not to use on disc software and how to install the necessary
    drivers from Microsoft.
    After reading this, I uninstalled the wireless controller software (from the programs panel), and since then, my laptop has suffered no more IRQL NOT LESS OR EQUAL crashes (or any crashes). However display drivers have stopped working occasionally (which
    never happened before this) and the computer now runs noticeably slower and louder with 3.1 GB of the 5.9 GB memory in use at all time. 
    I tried to system restore to the 4th of April, but I just got a "Please wait while your Windows files and settings are being restored" screen for half a day, before performing a hard reset. 
    I was running full avast before this happened, and malware bytes since. I do not have a Windows CD.
    Will running a working system restore help fix this? If so, can someone please help me do that?
    Many thanks. 

    Agree with S.Sengupta.
    From your description it seems that a system restore cannot be performed. As the issue occurs on display card driver, it is recommended to test to reinstall it - a newer driver may be available.
    I searched on Lenovo website and if G500 is your laptop, you can get the driver
    here. 
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Using Windows 7 Professional, as soon at I try to start a system restore, I receive error message "Incorrect function. (0x80070001)" and "Catastrophic failure (0x80000FFFF)." How can I avoid this and perform my system restore?

    Windows Explorer has stopped responding for the most part and I found http://support.microsoft.com/kb/2694911 list of solutions. After working through all of the first options on the list, I tried a system restore three different points
    but got the same two errors: "Incorrect function. (0x80070001)" and "Catastrophic failure (0x80000FFFF)."

    Hi TAS,
    Regarding the error message, I recommend you try to this :
    "0x8000ffff" error message when you try to restore a Windows 7-based computer by using System Restore
    http://support.microsoft.com/kb/2695585/en-us
    If your issue persists, let me known.
    Best regards,
    Karen Hu

  • Forgot icloud sign in and password can't restore my ipad

    Forgot my icloud sign in and password I can't restore my ipad 2

    Forgot My Apple ID or password - https://appleid.apple.com/

  • Time Machine and equivalent of System Restore?

    For years Microsoft have had (and needed) a feature called "System Restore" which lets you uninstall operating system updates that may have caused problems.
    I had hoped that Time Machine would also provide this capability since uninstalling Apple updates is not really possible. I cannot see any obvious way of doing this. For example, based on the fact that to undelete an email you have to have Mail at the foreground before activating Time Machine I thought it might be logical that if Time Machine can uninstall Apple Updates you would need to first have the Software Update preference pane open. This does not work.
    Has anyone else found a way to do this?
    While the rest of Time Machine (for undeleting files etc.) is wonderful, a way of rolling back Apple updates (or anyones updates) would be very helpful as well.

    AxL wrote:
    Yes but +"any changes to any file on the system (mail, photos, documents, etc) would be lost"+ only temporarily.
    They are all still on the TM backup, and you can restore them using the TM interface, and there's even an option to recreate a folder that doesn't exist anymore
    (better say "that was not yet existing"...)
    in the same location or in any other chosen location.
    No data loss.
    I have since my original post found that booting from the Leopard DVD and selecting restore from Time Machine lets you browse backups to restore from, and that it lists the version of Mac OS X for each. This would make it easy to select 10.5 if hypothetically reverting from 10.5.1 but it also suggests that hypothetically reverting from QuickTime 7.3 would be much harder since all you would have to go on would be a date/time. For this maybe the log in Software Update would be helpful.
    Your answer (thanks for it) however does resolve the worry I had about such a restore also reverting user data. Now that you have pointed it out one can of course then do a second restore when back up and running just of the user data.
    I would have to say though that this is not an elegant user friendly solution to this particular issue and thus not up to the standards one expects from Apple. Imagine if you are doing this on a machine with multiple user accounts (not unlikely for a home machine). You could also theoretically encounter a situation where you do an Apple update, create a new user, create data, need to remove the Apple update, have to restore the entire machine via Time Machine, and thus lose the user account, and therefore not be able to login to restore the user data. Potentially even if you recreate the user account, it may not have the same exact UID or UIDnumber and thus make restored data inaccessible (users are forgetful and you do not have control over the UIDnumber used).
    I still think a more friendly approach would be for the Software Update preference machine to be "Time Machined" like Apple Mail and iPhoto have been so that if you are in Software Update and activate Time Machine it will let you just revert an update without affecting user data.

  • FCP 5 Audio Capture Bug and Aurora Video Systems

    I think Apple know about this one. Aurora says that FCP 5.0x has a bug that makes setting audio capture levels imposible when using the Igniter.
    Will Apple fix this?
    Alex
    Edited by an Apple Discussions Host

    Are you sure all your settings are correct? Choose HDV 1080i50 Easy Setup >and make sure all your settings are correct on the camera.
    VCR HDV/DV > HDV
    iLINK CONV > OFF
    TV TYPE > 16:9
    A/V DV OUT > OFF
    Yes, the settings are correct. - But I'm not shure, if you use the same releases than me.
    I use: FCP 5.0.3, Mac OS X 10.4.3, QT 7.0.3 - maybe my problems depend on this.
    And to clarify this a little bit more:
    FCP logs the capture files on my harddisk, but I do not see them in my appropriate project. I have to import and rename them manually (from "Untitled" to the project name), after capturing...
    First I thought that there was a camera recognition problem, because it seemed to me that nothing happened while capturing. Then I found that the captured files are on my hard disk, but named "Untitled".
    In the past this worked fine (with an older cam, but I don't think it's a cam problem)!!!

  • HT4527 My computer crashed and did a system restore. All files & programs were wiped out. The music I had on itunes is also on ipad & ipod. How can I restore my music back to the computer itunes folder?

    My computer crashed and I did a sytem restore. All my files and programs were wiped out except for Windows. How can I restore my music back to the itunes folder on my computer from either the ipad 2 or ipod nano?

    Read turingtest2's User Tip:
    https://discussions.apple.com/docs/DOC-3991

  • Help  to change my email and password settings

    HI I  HAD AN ACCOUNT  FOR EMAIL FOR MANY YEARS WITH ROCK  .COM  THIS YEAR THEY STARTED CHARGING FOR THERE SERVICE SO I DECIDED  TO LEAVE I CHANGE MY DETAILS WITH APPLE ON BOTH IPHONE AND IPAD BUT  IT DOES NOT SEEM TO WORK AND WANT LET ME DOWN LOAD APPS  CAN ANY ONE HELP

    There' no way to reset it without setting up your device as new - which I'm guessing you don't want to do. Is there anyone else in your household, or anyone who you know that came into contact with the iPhone, that might have set up restrictions?

Maybe you are looking for