C3 is connected to my wlan but doesnt work

The phone says its connected to my wireless internet but when I try to use the internet it doesnt work at all. Opera etc....just bought it...dunno whats wrong...help

My iPad is connected to my computer, but it still will not download newly purchased apps.
Launch iTunes with the iPad connected to your computer.
Select the iPad under Devices in the source list left side of the iTunes window.
Select the Summary tab from the menu.
Deselect:  Sync with this iPad over Wi-Fi
Quit then relaunch iTunes.
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Similar Messages

  • HT4623 i tried to update my ipod which is the 4 generation and tried to get 6.0 os and it loded for a hour and my ipod has symbol to connect it to itunes but doesnt work!

    i tried to update my ipod and i have 4 gen. ipod touch and it loaded for a hour and it failed and now my ipod has a picture of connecting to the itunes on and it wont work!

    i've got the exact same problem, have you found any solutions???

  • Just bought an ipod touch and it wont sync with itunes. Tried resetting sync history but doesnt work, plus when i try to access itunes preferences it freezes for ages and creates loads of distnoted.exe files?????

    Just bought an ipod touch and it wont sync with itunes. Tried resetting sync history but doesnt work, plus when i try to access itunes preferences it freezes for ages and creates loads of distnoted.exe files?????

    Just realised when reading other peoples problems that it is not actually letting me reset sync history???

  • HT1212 if you cannot remember passcode you selected and get locked out of iphone 4 and it says to connect to itunes and it doesnt work what can you do to have use of your phone again?????

    Is there anyway you can enable iphone 4 afer being locked out by entering wrong passcode more than 5 times and it says to connect to itunes and still doesnt work???? so frustrating... apple cannot

    iOS: Forgotten passcode or device disabled after entering wrong passcode

  • I am having alot of trouble i want to use imessage but everytime i turn it on it turns on but doesnt work and it says verifying but its verifying my old number and i need it to verify my new number but it wont let me

    i am having alot of trouble i want to use imessage but everytime i turn it on it turns on but doesnt work and it says verifying but its verifying my old number and i need it to verify my new number but it wont let me

    You can likely download the last compatible version by:
    Starting when iOS 7 was released, Apple now allows downloading the last compatible version of some apps (iOS 4.2.1 and later only)
    App Store: Downloading Older Versions of Apps on iOS - Apple Club
    App Store: Install the latest compatible version of an app
    You first have to download the non-compatible version on your computer. Then when you try to purchase the version on your iPod you will be offered a compatible version if one exists.

  • ı buy virtual tenis game but doesnt work 3gs help please

    ı buy virtual tenis game but doesnt work 3gs help please

    ALL U.S. iphones are carrier locked and CANNOT be unlocked at all.  They can ONLY be activated with AT&T in the U.S.  No other carrier, no other country.
    No.  A U.S. iphone would have to be returned to the U.S.
    If possible you need to return the iphone to the U.S. for a full refund and buy one in your country.

  • When i go to swich my 3g on it has the green slider but doesnt work

    i reasently purchaced an iphone 5s from EE when i go to swich on my 3g the grren slider in on but the 3g doesnt work it has bars next to it but doesnt work. i have tried everything from taking out my sim card to reseting my whole phone but nothings changed. Its really frustrating and i need help urgent! Thank you

    Hi 
    Welcome to Community.
    You need to restore the device via iTunes. Click here for the Apple help & support on restoring.
    Let me know how you get on!
    Thanks. 

  • Song can not be used cause original file cant be found. do you want to locate it. but doesnt work and cant nplay song. help

    song cant be found. do you want to locate it. but doesnt work and cant play songs. I have a ! in a circle before each music file. help.

    Did you navigate to /Music/iTunes/iTunes media/Music/ and find yoru song?

  • I have the portable BOSE sound dock and after updating my ipod to ios7 the remote control of the dock only works for the volume but doesnt work for skipping songs....Is there a solution to this?

    I have the portable BOSE sound dock and after updating my ipod to ios7 the remote control of the dock only works for the volume but doesnt work for skipping songs....Is there a solution to this?

    Have you went to Bose"s support site?
    Sometimes this works
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    However, sometimes an iOS update breaks compatibility and you will have to wait for an firmware update for the Bose or an iOS update.

  • I'm connected to the WLan but no WebPages can be viewed

    Hi,
    The wireless has stopped working on my laptop.
    It will connect to several wireless networks but no web pages can be viewed and msn doesnt work.
    When wired the internet works fine. The wireless is turned on.
    Any ideas???
    Thank you
    Heather

    Hi,
    there are many threads in the forum about configuring wireless but you can start with this microsoft document to re-configure the wireless network:
    [http://www.microsoft.com/athome/moredone/wirelesssetup.mspx]
    I would also suggest you to search for "wireless configuration" on some search engines since there are many many documents out there where is described how to resolve such wireless problems.
    Also it would be nice if you tell us which machine you have, which operating system is installed (Windows XP or Vista), which router you use, etc...
    bye

  • Cannot get Airport to connect to net.. but ethernet works fine

    I was trying to install an Airport Express and failed in great style.
    How ever I have removed the airport from use and now use just modem\ router again.
    but I have tried resetting airport settings .. as it now assigns a self IP address of 169.15.*. instead of 10.1.1.* .
    I try adding the DNS as 10.1.1.1 (as on my partners iMac) and all the settings.. but it still wont connect to my network (well it connects but i cant use the net)
    but when i plug in ethernet.. works great....
    Have tried removing airport, adding dns address, manually adding details and that but still cant get my wireless cnnection working again (it did work until i attempted to install the airport express, but yea now airport card doesnt work.

    Any resolution on this Paul? Today I began with the same problem. My Macbook Pro on S.L. has been working great wirelessly. Now, it connects to my router and gets an ip address. But no internet. However, when I plug it into the router with a cable, I'm on in no time.
    I have logged into my router and cleared all the ip addresses and even reset it to factory settings. I've deleted my networks from my system prefs as well.
    Right now I'm running it hardwired to a Linksys router running dd-wrt- which is as close to wireless as I could come up with in a pinch.
    What did you do? Or does anyone else have ideas?

  • How do I install an apple usb SuperDrive with my macbook that already has a superdrive but doesnt work?

         I bought a macbook off of a friend but the CD drive to the computer doesnt work and was broke awhile ago. I needed to install some software onto this computer so I bought the Apple USB SuperDrive thinking it would work, but later finding out that it is only compatible with macs that dont have a superdrive built in. An Apple support technician told me that it could be done through a process, but she couldn't help me with. So it would be greatly appreciated if someone can help me with this problem. Thank You!

    There is some useful information here about the process mentioned:
    http://www.hardturm.ch/luz/2011/10/how-to-make-the-macbook-air-superdrive-work-w ith-any-mac/
    Of course you need to be very careful with any use of Terminal.

  • WRT45GC - Not connecting to NTL Broadband, but internet works fine minus the router

    I seem to have a problem try to get my WRT45GC to work as an accesspoint for my NTL connection.  If the modem is plugged directly into my PC via ethernet cable, internet works fine.  But if I plug my WRT45GC into the modem then have a direct connection to my pc from the router, i only get limited or no connectivity.
    Also once this has been set up my laptop can pick up the wireless network but once again no internet.
    I have been told different things by different people ie, the modem and router may have the same IP address, the router may not have DCHP enabled ( I dont have the IP address to log onto the router) please can someone help
    If i unplug the router and have the modem connecting directly to the pc, internet works fine again.

    if u have a cable connection....follow the steps below
    1) connect the computer to one of the LAN ports on the router...and connect the modem to the router's internet port.
    2) check the ip add on the computer . to check the ip add go to start -> run -> cmd -> ipconfig...ensure that u have an ip add of 192.168.1.x and default gateway 192.168.1.1
    2) access the router using http://192.168.1.1 . Keep the username blank and the default password is "admin".
    3) go to the "mac add clone" subtab , enable it and click clone your pc's mac..save the settings....do a power cycle
    4) go to the "wireless" tab , change the ssid , channel - 1 or 11.
    If this does not work for u , revert back with the details - ISP name , cable / DSL , internet ip add off of the status page on the router....

  • My iPad says it's connected to my wifi but nothing works or loads. My xbox and cable box work on my wifi.  Please help?

    My iPad says it's connected to the wifi but nothing loads. My xbox and cable box connect and work just fine.

    Hey JnastyCL,
    Thanks for the question. The following resource outlines the basic troubleshooting steps for Wi-Fi connectivity. I have also included the steps specific to the symptoms you are experiencing:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    Be sure you're in range of your Wi-Fi router (access point).
    Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your W-Fi setting is dimmed, follow these steps.
    Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
    Tap  and Forget this Network.
    Try to connect to your desired Wi-Fi network.
    Note: You may need to enter your Wi-Fi password again if your network requires one.
    Turn your Wi-Fi router off and on. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Update your device to the latest version of software.
    Update your Wi-Fi router to the latest firmware. For AirPort Base Stations, install updates using the AirPort Utility.
    Unable to access the Internet while connected to Wi-Fi
    If you're using a public or commercial network, you may need to log in or subscribe.
    Check to see if you have a self-assigned IP address:
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected and tap ( i ) .
    If your IP address is 169.254.xxx.xxx, you may not be able to access the Internet.
    If you do not have a self-assigned IP address, see if other Wi-Fi devices on your network have Internet access.
    If they do not, consult with your network administrator or ISP for further assistance.
    If they do, reset network settings on your device by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
    previously connected Wi-Fi networks and passwords
    recently used Bluetooth accessories
    VPN and APN settings
    Thanks,
    Matt M.

  • Mi ipad2 is blocked, i try pushing the 2 button at the same time but doesnt work

    my ipad2 is blocked, i try to restart pushing the 2 buttons at the same time but doesnt work

    Have you tried to keep them for long enough? It's usually around 10 seconds but it can be longer.

Maybe you are looking for

  • PartialTriggers to a trh:script is not working.

    <af:panelGroupLayout layout="scroll" id="pgl3"> <af:panelBox text="Click arrow at left to hide message" id="pb3" clientComponent="true" binding="#{TextScrollerBean.tickerPanel}" inlineStyle="margin-right:10px;margin-left:10px;" contentStyle="height:5

  • PDF "save as" Word doc

    I'm using Acrobat 8 Pro. I need to get text out of a couple of PDFs (the text will ultimately go into an InDesign document, but at this point I'm just trying to get any kind of usable text file out of the PDF). I've tried several "save as" options, a

  • Management Software for Dell Projectors

    Good evening everybody I am new to the topic of Dell projectors and i wanted to know if there is a Management Software for projectors-models like 7609WU or 4320. I want to configure the projector remotable and not with the in-build web interface. Is

  • 2012 NLB Best Practice (Single vs Multiple NICs)?

    Our environment has used an NLB configuration with two NICs for years.  One NIC for the host itself and one for the NLB.  We have also been running the NLB in multicast mode.  Starting with 2008, we began adding the cluster's MAC address as an ARP en

  • When & Why to Use WL Adapter for MQSeries as compared to MDB?

              We have a need to both send and receive message via MQSeries in asynch mode.           Initial assessment was to receive messages via MDB and send messages by use a           pool of Sessions to the MQ Mgr connection.           Given this w