C3180 head cleaner brush -- where does it go?

The brush that cleans the heads popped out and I can't for the life of me figure out how to put the stupid thing back in again!
Thanks!
This question was solved.
View Solution.

This brush is to keep fibers from building up on the printhead, causing ink to drag on the paper causing streaks as shown here. You can safely use the printer without this brush. After years of hard use (less if you have pets that shed near the printer :-) you may get streaks, at which time you could clean the cartridge as shown in the previous link.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

Where does one set space after paragraph in the new Pages 5.0? It used to be under text in the Inspector in the previous version, but I just can't find it in this new version.

Where does one set space after paragraph in the new Pages 5.0? It used to be under text in the Inspector in the previous version, but I just can't find it in this new version. Paragraphs seem to only be dealt with in styles, and the Formatting window for text doesn't seem to have the space after paragraph contrtol that the older Inspector had. What am I missing?

Sorry I did this without looking:
Side panel >Text > Style > Spacing > Turn the triangle > Before Paragraph/After Paragraph/
This is the trouble with the Peeky Boo Contextual Interface that so many wiser heads than mine love to love.
Peter

When I transfer photos from my camera to my computer, where does the computer store them?

When I transfer photos from my camera to my computer, where does the computer store them?

Assuming you're using iPhoto 09 or later.
By default the photos are stored in the iPhoto Library in your Pictures Folder.
The iPhoto Library is a Package File. This is simply a folder that looks like a file in the Finder. This is a simple protection from users inadvertently corrupting their library by browsing through it with other software or making changes in it themselves.
Want to look inside? Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Standard Warning: Don't change anything in the iPhoto Library Folder via the Finder or any other application. iPhoto depends on the structure as well as the contents of this folder. Moving things, renaming things,, deleting them or otherwise making changes will prevent iPhoto from working and could even cause you to damage or lose your photos.
As an FYI: There are many, many ways to access your files in iPhoto: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
(Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
You can access the Library from the New Message Window in Mail:
There's a similar option in Outlook and many, many other apps. If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
If you want to access the files with iPhoto not running:
For users of 10.6 and later: You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu.
Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and 10.5 Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
Show File: a. On iPhoto 09 and earlier: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected. 3.b.
b: On iPhoto 11 and later: Select one of the affected photos in the iPhoto Window and go File -> Reveal in Finder -> Original. A Finder window will pop open with the file already selected.

How to stop print head cleans?

I have a B110A printer. Each time I install new ink, turn on or wake up the printer from sleep, it spends over 5 minutes doing some sort of set up. Most of all, the installation of new ink gets reduced significantly before I do any printing. This is obviously the print heads working without my permission. Is there any way I can disable this? I only want to run print head cleans when I choose.

Hi @Doorway,
Welcome to the HP Forums!
I understand that you are wondering if the printhead cleaning can be disabled with your HP Photosmart Wireless B110A printer. I am happy to answer this for you!
Please see this guide, Ink Usage in Inkjet Printers, for more information.
This is a routine function of the printer, in order for the printheads not to be clogged. It cannot be disabled.
Hope this answers your question, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Where does destination country info come from on SD Billing ???

On our SD invoice - in the lower portion of Item Details tab - I can see the first field as
DestCtryOrde - this shows the value CA or Canada
When I check my SD order - nowhere do I find the field Destination Country ( I have also checked sold-to and ship-to party)
Can anyone please let me know - where does the value DestCtryOrdr in the invoice come from???
Thanks,
SM

Hi,
Destination country is same as the country of your ship-to-party.
Go to the T.Code "SE11/SE16".
Enter the table name as "VBPA".
Enter your sales order number for the field "VBELN".Execute.
Get the "KUNNR" for the PARVW = "WE".
Goto the table "KNA1".
Pass this "KUNNR" here and Execute.Get the value of the field "LAND1".
It is the same as the value you have identified in your invoice.
Goto the T.Code "VA02".Enter your Sales order number.Enter.
Goto Header-->Billing document tab.
Goto the field "Tax destination country".This field is used for determinining the tax.The country of the ship-to party is used as the tax country of destination.That is field is also similar to this.Even this field is blank,the field you have identified in invoice will be having a value because ship-to-party's country is mandatory one.
Regards,
Krishna.

Where does Iphoto store ratings, arrangement of photos, events, libraries?

Hi, I currently have Leopard, I was planning on doing a clean install with Snow Leopard soon. Afterwards I plan on restoring Iphoto back to the way it was. I have a 70 gb library and importing my photos, rearranging the events, photos, and libraries would take ages if I had to start from scratch. I have my whole computer backed up using Carbon Copy Cloner. My question is where does Iphoto store the ratings, manual arrangement of photos, events, libraries, etc? Thanks

iPhoto is a relational database program and everything is stored in the iPhoto library - it must be treated as a single entity - it is not possible to isolate components in it - simply drag the iPhoto library intact as a single entity from the clone back to the pictures folder of the main computer
To test prior to doing an erase and install (the Mac does not have a "clean install") you can depress the option key and launch iPhoto and select the backup copy and test it - be sure to do an option launch and paint back to the main library afterwards
LN
LN

Where does a site get saved?

Hi.
When we save a site on iWeb where does it exactly save them? this is one feature I wished iWeb would include in its Preferences settings so that we could at least find it easily or choose where we would prefer to save the site.
Thanks for your comments.
Farzad

First thanks to all those who assisted with this question. The reason i was looking to look inside the files was because I was going to add a counter to my page and could not find the html files. And secondly i hope others who are looking for the solution will benefit from my sharing of the information below.
Here is how it works:
Depending on how the site is published - local folder or iDisk, we need to get to that saved location to find all the files that make the site work. in my case i was publishing to iDisk and thought when i execute a File/Save command that iWeb saves to my local drive somewher while I think, and I am not very sure, that it gets saved on iDisk or where the last publishing took place.
So this one of my issue has been solved. On with the cleaning of the gutters around the house now. It is full of leaves. Of course tomorrow when it is sunny again.
Farzad

Where does the personalized page definition exist in the database?

Hey all,
Where does the personalized page definition exist in the database(which top)?From the functional adminitartor i see the path as "/oracle/apps/ar/creditmgt/analysis/casefolder/webui/customizations/responsibility/12345/pagename.xml" where does this structure actually exist in the file system? i want to know the header package or root directory of "/oracle/apps/ar/creditmgt/analysis/casefolder/webui/customizations/"
one more question the gurus is if i want to migrate a personalization from on instance to another should i have the same above folder structure?
Like i export the customized page from my T1 test instance to T1 file system now i move this to T2 file system...now in my T2 file system should i have similar structure like "XX_TOP/oracle/apps/ar/creditmgt/analysis/casefolder/webui/customizations/" for successful migration?
Thanks & Regards,
Sameer.T

You perobably need someone more 'tecchie' than me to answer the first question. But, the structure will already exist as it is built into the application.
To answer your second question, to transfer the personalisation from one instance to the other, you can use the Functional Administrator responsibility. Your DBA will need to create a 'common' directory which is available to both instances. If the two instances cannot 'talk to each other', then he may have to FTP the XML files from one instance to the other.
When you export from instance A, the appropriate structure will be built underneath the root 'transfer' directory described above. In the target environment, you import the same structure.
As personalisations are at various levels, e.g. responsibility, function etc. Beware that at the responsibility level, the match between the responsibility name on the source and target systems is done by the responsibikity key. As long as this is the same in both environments, the personalisation will be transferred. If it is different it won't work!
I hope this helps answer the question.
Regards
Tim

Where does Snow Leopard store iTunes Music

Greetings,
I wanted to get a clean start for my iTunes Library.
First, I deleted my iTunes folder in Documents into the trash and then emptied the Trash. Second, I deleted the iTunes app.
I went to iTunes and downloaded a new iTunes application. After it was installed the entire iTunes music library was there when I opened my new download of the iTunes Application.
Where did it come from if I deleted my iTunes folder thinking I was deleting all of my downloaded songs?
So my question is where does Snow Leopard store these songs? I assumed they would be gone so I could begin to put in new albums in my iTunes.
Thanks in advance for your help and support.
Leigh

You can find out or change where the actual songs are by opening iTunes/Preferences/Advanced (I'm still on iTunes 8 so I apologize if your menu looks different). Click my link below. The yellow highlight is mine.
http://i42.photobucket.com/albums/e311/racer27x/Public/Picture2-1.png
Message was edited by: Frank Muller

Where Does Yosemite Installer Hide? (aka missing disk space)

I've been using a 400GB partition on an external drive for Time Machine backups for some time and it's had plenty of room to work with. I upgraded to Yosemite recently and all was well with the Time Machine backups.
Yesterday I downloaded Yosemite again to install it on a second drive so that I would have a second bootable drive. Today I got notice that there was not enough space on my Time Machine backup drive. Suddenly the 400GB was not enough and my primary boot drive had swollen to 480GB. I don't know what it had been, but obviously there is now a lot more on it than there was.
My assumption is that I have the Yosemite Installer and/or hidden installer files that didn't get cleaned up after the second installation. I can't find anything in hidden files or folders that I recognize as such but soemthing is eating up lots of disk space that I need to free.
Where does the App Store stash downloads in case that's it?
If I hold Option on a restart, I no longer have the Installer as an optional boot disk, but I do get three "Recovery-10"... disks. Possibly those are the problem, but I can't locate them either.
Any ideas would be appreciated.

Ok, I may have found a possible solution. I found this at stack exchange. It's not the best option and it requires a simple shell command, and will not be able to be used to restore from Time Machine, but for backing up one or more directory, at least in the short term, this will work. Here it is:
There seems to be an issue with Yosemite renaming the computer local host by adding (#) after the computer name. There are other reports of this happening in a thread on MacRumors Forum and I believe a few people have blamed this as a cause of time machine backup failures. I've tried a few of the suggestions in the thread but so far none have worked. I've stopped using time machine for now and reverted to an old bash rsync script.
A really simple solution is to open the terminal and type:
rsync -avu ~/ /Volumes/backup_disk/backup_folder
replacing 'backup_disk' with the name of your external hard drive and 'backup_folder' with the name of the backup folder i.e.: 'yosemite_backup'. The three flags -avu mean: archive (a) copy the home directory recursively into sub folders, verbose (v) print to the terminal window everything you are copying (feel free to leave this out) and update (u) will only overwrite files that are newer than the archived file (useful after the initial main backup). This solution isn't as hands off as time machine but at least it's a simple way to back up vital information in Documents and Pictures/Videos.
Hope this helps!
to read the full discussion go to http://apple.stackexchange.com/questions/151662/os-x-yosemite-time-machine-ident ity-of-the-backup-disk-has-changed

Where does the control moves at first at END-OF PAGE or END-OF-SELECTION

Is END-OF PAGE triggered like TOP-OF-PAGE from the AT-SELECTON-SCREEN automatically with a write statement & where does the control moves at first
at END-OF PAGE or END-OF-SELECTION?

Hi,
1. End-of-selection:
This event is triggered after the start-of-selection. to display the contents on the report.
2.Top-of-page: Every time a new page is triggered. Mainly this is used for header of the report.
3. End-of-page : every time the list data reaches the footer region of the page.
This way first data is disaplyed then it reaches the footer..
first End-of-selection then End-of-page
These example may help u in detail...
Leaving Event Blocks Using STOP
If you use the STOP statement within an event block, the system stops processing the block immediately. The ABAP runtime environment triggers the next event according to the following diagram:
Before and during selection screen processing, the next event in the prescribed sequence is always called. From the AT SELECTION-SCREEN event onwards, the system always jumps from a STOP statement directly to the END-OF-SELECTION statement. Once the corresponding event block has been processed, the system displays the list.
The following program is connected to the logical database F1S.
REPORT EVENT_TEST.
NODES: SPFLI, SFLIGHT, SBOOK.
START-OF-SELECTION.
WRITE 'Test program for STOP'.
GET SBOOK.
WRITE: 'Bookid', SBOOK-BOOKID.
STOP.
END-OF-SELECTION.
WRITE: / 'End of Selection'.
This produces the following output:
Test Program for STOP
Bookid 00010001
End of Selection
As soon as the first line of SBOOK has been read, the system calls the END-OF-SELECTION event block.
Exiting Event Blocks Using EXIT
If you use the EXIT statement within an event block but not in a loop, the system stops processing the block immediately. The ABAP runtime environment triggers the next event according to the following diagram:
Before and during selection screen processing, the next event in the prescribed sequence is always called. From the START-OF-SELECTION event onwards, the system starts the list processor directly when the EXITstatement occurs, and displays the list.
If the EXIT statement occurs inside a DO, WHILE, or LOOP loop, it is the loop that terminates, not the processing block.
The following executable program is connected to the logical database F1S.
REPORT demo_program_exit_1.
NODES: spfli, sflight, sbook.
START-OF-SELECTION.
WRITE 'Test Program for EXIT'.
GET sbook.
WRITE: 'Bookid', sbook-bookid.
EXIT.
END-OF-SELECTION.
WRITE: / 'End of selection'.
This produces the following output:
Test Program for EXIT
Bookid 00010001
After the first line of SBOOK has been read, the list is displayed immediately.
The following executable program is connected to the logical database F1S.
REPORT demo_program_exit_2.
NODES: spfli, sflight, sbook.
DATA flag(1) TYPE c.
AT SELECTION-SCREEN.
IF carrid-low IS INITIAL.
flag = 'X'.
EXIT.
ENDIF.
START-OF-SELECTION.
IF flag = 'X'.
WRITE / 'No input for CARRID'.
EXIT.
ENDIF.
GET spfli.
GET sflight.
GET sbook.
END-OF-SELECTION.
WRITE / 'End of Selection'.
If the user does not enter a value for CARRID-LOW, the output appears as follows:
No selection made for CARRID
After the first EXIT statement, the next START-OF-SELECTION event is triggered. After the second EXITstatement, the output list is displayed.
Regards.

Where does the default route come from ?

Dear All
As we know, the edge router in client side gets default route from ISP' edge router. Where does the default route come from in ISP? If the ISP edge router has full route table, it produces there. If not, it comes from its upstream router until full routes table(only BGP). Please correct me if I am wrong. Thank you.

Hello.
While establishing BGP with ISP, there are three options for a client:
> Default route (used in general) - client router forwards every request (for destination route) to ISP router.
> Full route - ISP router's complete routing table would be received and maintained in client router.
> Partial route - Only specific route would be received from ISP (Head office - Branch office scenario)
ISP generate default route from their peering router that should have full routing table or knowledge of the router having it. A local ISP may generate default to their client and have one received from their upstream or global / larger ISP. Hope this helps.

Usage of static electricity cleaner / brusher?

Hi,
I would like to ask if using a static electricity cleaner / brusher to remove dust would affect the iphone? I would usually turn the phone off during that.
Thank you!

Hi Japamac,
I live in a cave, but I think I will take your advice and cut back on the frequency. Is there a duster specially made for such? And if so, where can I get one? So, there is some sort of coating on the LCD screen? Thanks for the feedback.
Hi-
Where do you have the display that requires twice a
day cleaning? You're gonna wear it out, or, damaged
the coating on the panel.
Slow down, wipe less frequently, and get a soft LCD
panel dust brush for your all so often cleaning. That
won't harm the coating on the screen.
Here is Apples cleaning advice:
http://docs.info.apple.com/article.html?artnum=60446
G4AGP(450)Sawtooth,
2ghz PowerLogix, 2gbRAM, 300gbSATA+160gbATA, ATI
Radeon 9800 Mac OS X (10.4.8) Pioneer DVR-109,
ExtHD 160gb x2, 23"Cinema Display, Ratoc USB2.0,
Nikon Coolscan
G4 dual 1 GHz 1.5G SDRAM Mac OS X (10.4.9) 2 120 GB HDs, Apples 23" HD LCD (clear coat, not silver metallic)
G4 dual 1 GHz 1.5G SDRAM Mac OS X (10.4.9) 2 120 GB HDs, Apples 23" HD LCD (clear coat, not silver metallic)

Where does yahoo Messenger files go

I'm trying to find a file that was sent to me threw yahoo messenger on my iPhone when I open messenger I see when file was sent in previous message but I cannot reopen it where does it store how can I access this file again. Please help.. I'm using unlocked iPhone 4 iOS 4 on tmobile carrier

The include directory contains C language header (.h) files that may be linked with files in the lib directory. Those files are used by adadmin and adpatch (and some other ad utilities) to relink executable files which will be located under the $PRODUCT_TOP/bin directory. Please note that not all products require this directory.
Oracle Applications Concepts
http://download-uk.oracle.com/docs/cd/B25516_14/current/acrobat/11iconcepts.pdf

APEX JS libraries - From where does these are getting loaded

Hi All,
In every page I can see APEX is loading following JS libraries.
<script src="/i/javascript/apex_ns_3_1.js" type="text/javascript"></script>
<script src="/i/javascript/apex_3_1.js" type="text/javascript"></script>
<script src="/i/javascript/apex_get_3_1.js" type="text/javascript"></script>
<script src="/i/javascript/apex_builder.js" type="text/javascript"></script>I was thinking these must be specified in the page template, but it's not the case! Could you tell from where does these are getting loaded?
Thanks,
Hari

They are included by the #HEAD# substitution string in the page template.
http://download.oracle.com/docs/cd/E14373_01/appdev.32/e11838/themes.htm#sthref1670
This substitution includes the standard APEX CSS and JS references and the contents of the page HTML Header property. From APEX 3.1, the standard CSS/JS can be suppressed using the Include Standard CSS and JavaScript HTML Header property.
http://download.oracle.com/docs/cd/E14373_01/appdev.32/e11838/bldr_pgs.htm#sthref613

C3180 head cleaner brush -- where does it go?

Similar Messages

Maybe you are looking for