C3560-24PS-s Switch with IPBase IOS

Dear Friends,
I have two switches of cisco c3560-24PS-s with IPbase ios installed. I need the routing OSPF and RIPv2 for my network.
But these switches not support OSPF while they can support RIPV2.
Can i upgrade this switch to any IPservices IOS that work ospf for me?
I tried one, it was showing all the thing about ospf: Like
(config)# Router ospf 100 was supporting but it was not working , not making the adjecency.
Please guide me and help me in this regards
Thanks
Ali Khan

1) Version= C3560-IPSERVICESK9-M), Version 12.2(55)SE7,
2) show boot
  BOOT path-list      : flash:/c3560-ipservicesk9-mz.122-55.SE7.bin
Config file         : flash:/config.text
Private Config file : flash:/private-config.text
Enable Break        : no
Manual Boot         : no
HELPER path-list    :
Auto upgrade        : yes
Auto upgrade path   :
NVRAM/Config file
      buffer size:   524288
Timeout for Config
          Download:    0 seconds
Config Download
       via DHCP:       disabled (next boot: disabled)
my provider updated it to Ipservices and ospf shows everything but not working
3) Show license summary
  This command is not recognized

Similar Messages

  • Catalyst 2960s Stacking with different IOS versions

                       Hello Forum Team;
    When adding a new switch with older ios version to an existing stack (flexstack) does the new switch will be able to join the stack?
    Thanks in advanced!

    Hi,
    In a stack/flexstack all the switches should have exact same IOS version, otherwise there will be a version mismatch on the stack and the new switch will not be able to join the stack.
    The following Document contains more info:
    http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6406/white_paper_c11-578928.html
    Thanks
    Ankur
    "Please rate the post if found useful"

  • Can i upgrade this switch WS-C2960-24TC-L with lastest IOS 15.0(2)SE6.

    Can i upgrade this switch WS-C2960-24TC-L with lastest IOS 15.0(2)SE6. 

    Yes I see that this is supported on this switch. Upgrade to this switch should not face any problem.
    Suggested
    12.2.55-SE9(MD) 
    Latest
    15.0.2-SE6(MD)
    12.2.58-SE2(ED)
    http://software.cisco.com/download/release.html?mdfid=279963375&flowid=2547&softwareid=280805680&release=12.2.55-SE9&relind=AVAILABLE&rellifecycle=MD&reltype=latest
    HTH
    Regards
    Inayath

  • Phones don't boot with certain ios switch cmds

    During a new 4.1.3 call mgr install, 7961 phones hung during bootup. Had to remove the followimg cmds from the 3750 stacks to get them to boot:
    Removed ip verify source from each interface
    Removed ip arp inspection ?vlan info? from global config
    Removed ip dhcp snooping ?vlan info? from global config
    Since then, the phone loads have been upgraded to 8.0.4.sr1 and all seems well. I's like to tell customer that the new load fixed the problem, but I have yet to see anything about it in the release notes.
    Has anyone run into this ?
    Rob

    I had a similar problem on 6509 switches with some 7.X.X phone load, but did not get a chance to upgrade the loads. Every new phone when connected to the network for the first time would get stuck in "Configuring IP".
    Two workarounds:
    1. "clear ip dhcp snooping binding"
    2. Factory Reset the IP Phone

  • With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message  even when im using the phone, has  this probleme with the iOs 6.0.1 and also with the iOs 6.1

    With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message  even when im using the phone, has  this probleme with the iOs 6.0.1 and also with the iOs 6.1

    This isn't an issue. Notice the screen prior to the one that shows usage has an iCloud section and a Manage Storage button. For this button to activate ios needs to download a few kb from icloud. Switching back to this screen forces ios to download those few kb.

  • Is there something wrong with the IOS 6 update?

    Ever since I downloaded the iTunes IOS 6 update on my 2nd-gen iPad, I haven't been able to check my list of purchased apps in the purchased section the iTunes store app. I tried logging out & signing back in and I tried rebooting my iPad, but neither of them worked. Can you please fix the IOS update? Thanks if you and keep up the incredible work!

    Never mind, there's definitely something wrong with the IOS 6 update. Sometimes the App Store doesn't show that an app has been purchased & it only shows the price of the app. Other times, it doesn't show that an app is currently being downloaded or that it's installed.
    Still though, Apple, you really do need to fix this IOS 6 because the Purchased Apps section won't finish loading & display the ones that have been purchased. Also, you need to improve the App & iTunes gift card payment method because if you use a credit card & then switch back to gift card, it doesn't remember how much leftover money you had before & you can't combine the change from the previously-used ones together into one lump of money.
    32 cents isn't enough to buy anything, not even a $0.99 app. The money is going by without being used and its a waste of money! If it's possible, please fix these two problems. Thanks if you do & keep up the incredible work!!!!!

  • HT4623 updated ipad mini last night with the ios 7.6 and now am unable to restart the pad, we have tried charging it completely and have had no luck in restarting it

    updated ipad mini last night with the ios 7.6 and now am unable to restart the pad, we have tried charging it completely and have had no luck in restarting it

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without be charged again.  Also, if you have IOS-7, read this.

  • Keep losing my secure wifi with iPhone and ipad with newest iOS update.  PC still connected

    Keep losing my secure wifi on my ipad and iphone with newest iOS update. My PC is still connected to same secure wifi. Any ideas.

    Contact xFinity (Comcast) to turn off dynamic channel switching if on and have it set to a fixed channel.
    Usually WiFi routers will only change channels to the least busy when they are initially powered up.

  • Can I Stack Switches with differents Part Numbers? Is it possible??

    Hi,
    I have a doubt, I need to buy 4 Switches Cisco 3750-X, but 2 with UTP/RJ-45 Ports, and 2 with STP capability.
    My question is, for example, Can I stack 2 WS-C3750X-48T-E and 2 WS-C3750X-24S-E??

    Disclaimer
    The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
    Liability Disclaimer
    In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
    Posting
    The only limitation of stacking different 3750X models is the feature set of the installed IOS.
    I.e.:  "The Cisco Catalyst 3750-X Series Switches with LAN Base feature set can only stack with other Cisco Catalyst 3750‑X Series LAN Base switches. A mixed stack of LAN Base switch with IP Base or IP Services features set is not supported."

  • The # keys on macbook switched with leters below it.

    A friend's Macbook number keys are switched with the letter key below it (pressing 1 shows a Q).  She says it happened on its own and no one messed with it.  It's a few years old, not sure on specs and OS beyond that. I'm thinking its a simple software fix and not a hardware problem. Any suggestions?

    Connect the iPod to your computer and restore via iTunes. See:
    iTunes: Backing up, updating, and restoring iOS software

  • How to sync Address book with iphone(iOS 6) and 10.7.4?

    How to sync Address book with iphone(iOS 6) and 10.7.4

    i'm having this issue too.  it's a bit more complex though i think so i'll give the details:
    a few days ago i added some people to my contacts using my phone. the thing they have in common is they're all new contacts.
    they synced over to my macbook address book ok.
    then a few days later i had to do a full restore of my iphone for various reasons (the new one, already!) which i did. when i then looked in my iphone contacts, these contacts were no longer there. they WERE however, still in my macbook address book.
    so i figured i'd switch icloud syncing off for contacts and then resync to get them back on my phone. it didn't work. so i then turned off icloud sync and tried a good old manual sync via itunes, making sure to check the box for syncing contacts.  it still didn't work.
    now i'm at that odd place where the contacts are in my macbook address book but not in my phone and i can't seem to get them onto my phone (which is frustrating as ultimately they are phone numbers and in my phone is the best place for them!)
    any ideas?

  • Trunk SF300 switch with a 3750

    Is it possible to trunk a SF300 switch with a 3750 switch?  If so how?  Whenever I turn trunking on the 3750 port I lose connection to the SF300.
    I would appreciate any assistance, thanks
    Larnel

    Here's some sample config that I've got.  In the version of OS on the SF 300 right now, you can't acces the LCLI, but you can tftp backup/restore it;
    ! On the SF 300;
    ! Note that VLAN 111 is my native/untagged VLAN and the management VLAN here
    ! The 20x VLANs are 802.1q trunk/tagged
    ! Remember that there is no VTP here, so you must manually create the VLANs first
    interface range ethernet g(1-4)
    description "Uplink trunk"
    exit
    interface range ethernet g(1-4)
    switchport default-vlan tagged
    exit
    vlan database
    vlan 111,200,201,202
    exit
    interface range ethernet g(1-4)
    switchport trunk allowed vlan add 200
    exit
    interface range ethernet e(21-24)
    switchport access vlan 201
    exit
    interface range ethernet g(1-4)
    switchport trunk allowed vlan add 201
    exit
    interface range ethernet g(1-4)
    switchport trunk allowed vlan add 202
    exit
    interface range ethernet g(1-4)
    switchport trunk native vlan 111
    exit
    interface vlan 111
    ip address 10.111.0.5 255.255.255.0
    exit
    interface vlan 1
    no ip address dhcp
    exit
    ! On the Cisco IOS switch;
    Switch1#sh run int Gi2/0/19
    Building configuration...
    Current configuration : 334 bytes
    interface GigabitEthernet2/0/19
    description whatever-bla-bla-bla
    switchport trunk encapsulation dot1q
    switchport trunk native vlan 111
    switchport trunk allowed vlan 111,200,201,202
    switchport mode trunk
    switchport nonegotiate
    end

  • I have just updated my iPhone 4 with latest IOS 7 and now wi fi greyed out and Bluetooth not working. Tried reset, restore everything - no use. Its out of warranty too. I refuse to pay for a new phone when clearly this is an apple issue not phone issue.

    Can anyone help? I updated my iPhone 4 with latest iOS 7 and now wi fi is greyed out, Bluetooth won't work and tbh am so angry! Phone now out of warranty so apple won't help without it costing me. Don't want to pay as its an apple problem not phone problem. It worked ok before. Tried everything, even clearing it down. Can't even back it up now unless I connect to a pc!

    I have not had wifi since November when I upgraded to the newest IOS version.  I called the Apple help line and they told me some things to do and I tried them all and they worked for a few hours and then wifi shut off again.  I kept doing what they told me and it worked for a couple more days and then I could never turn it on again.  My blue tooth doesn't work either.  I had to actually increase my data usage with AT&T becuase of this.  When I did that in December I went to the Apple store and was told that it is a hardware issue and since my phone is out of warranty I would have to pay for a new phone because they could not fix the issue.  My upgrade isn't up until June 2014 so not only do I have to wait for the upgrade and I am not paying for a new phone but I have to pay $10 plus extra a month on my cell phone bill because I was going over on my Data!!!  I have been beyond upset about this and Apple is not doing anything about this nor did they offer up some way to resolve the issue because obviously it is not just some rare incident if several people are having this issue.  Who knows how many people out there have had this issue and have not said anything about it.  Now there is a newer update that I can't do because it requires wifi in order to download.
    June can not get here fast enough and I may not go back to Iphone after dealing with this for so long with no help from Apple.

  • How do you change the Apple ID associated with an iOS device?

    So…I made the mistake of putting the wrong Apple ID (I have three – don't ask) on my iOS devices. If I try to change the Apple ID on my Mac, it wants to erase everything that I have on my Mac that is also stored on the iCloud. That is not a good solution. So, I want to change the Apple ID associated with my iOS devices (far less to lose there). The problem is that niether of my iOS devices will let me change the Apple ID associated with them – at least not that I can find.
    Does anyone know how to do that so I can get my Mac on the same page with my iPhone/iPad?
    Thanks.

    This is the kind of question where it helps to know what you are trying to achieve since the way you phrased the question has several interpretations.  CarolynSamit gave you one, here's another two:
    Apple ID Support - http://www.apple.com/support/appleid/  -> Apple ID FAQ http://support.apple.com/kb/HE37
    "How do I change my Apple ID Name or personal information?
        You can change your Apple ID Name at My Apple ID. Select your country and language, enter your desired changes, then click the Continue button. Changes take effect immediately. You can also use My Apple ID to change your personal information, such as your mailing address or email address. See How to change the name you use for your Apple ID if you'd like more information."
    How to change the name you use for your Apple ID - http://support.apple.com/kb/HE40
    Another answer is you cannot.  Items purchased with one AppleID cannot be transferred to a different account.

  • How to publish with my iOS Dev Account ?

    Hi there,
    I wrote an iBooks and I want to publish it on the iBooks store but i can't connect to iTunes Connect. It says " The iTunes Store account entered is already being used for an iTunes Connect account that distributes Apps. To continue with this application, you must enter a different iTunes account. "
    May i create another account just for that ?
    Thanks in advance for your answer.

    i had the same question and here is an answer supplied by KT for the same question in another thread -
    the question was -
    Can I use my iTunes Connect account associated with my iOS Developers license to publish to the iBookstore?
    and KT answered -
    No, sorry
    Separate.
    Log out from one...log in to the other and use Safari's 'Empty Cache' menu to help clear the cruft if you stumble.

Maybe you are looking for